SMD High Density Circuit Test Kit
Everything You Need for SMD
Test with Your DMM in One Kit
SMD micro and mini grabbers attach to chip
leads with pitches down to 0.008 (0.20 mm).
Includes all adapters and leads necessary for
attachment to standard bench or handheld DMM
Probe tips are sharp and spring-loaded for solid
and steady contact with SMD test points.
Compatible with all multimeters that accept
standard sheathed banana plugs.
Test accessories conveniently store in four-fold
1. Two fine spring-loaded tips, Probe to Right Angle Test
2. Two 4mm Jacks to Mini SMD.
3. Six 4mm Jacks to Socket Leads.
4. Six Micro Challenger Clips
5. Two Holding rods.
For specifications for the kit individual components,
please see the data sheets for those components at
31-(0) 40 2675 150
Where to Buy:
All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm),
.xxx = ± .005 (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Page 1 of 1
|首页 - - 友情链接|
|Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM