电子元器件数据表 IC PDF查询
English 中文版
  品牌   我要上传
型号:  
描述:
1N5418  X40431  X40434S14I-A  X40434  X40434S14-B  1N5419US  X40431  X40434S14I-C  1N5418  1N5420  
ML4435IS Sensorless BLDC Motor Controller
型号:   ML4435IS
PDF文件: 下载PDF文件   鼠标右键选目标另存为
网页直接浏览   不需安装PDF阅读软件
在线打开PDF文件   需安装PDF阅读软件
描述:   Sensorless BLDC Motor Controller
文件大小 :   568 K    14 页
Logo:   
品牌   MICRO-LINEAR [ MICRO LINEAR CORPORATION ]
购买 :   
  浏览型号ML4435IS的Datasheet PDF文件第2页 浏览型号ML4435IS的Datasheet PDF文件第3页 浏览型号ML4435IS的Datasheet PDF文件第4页 浏览型号ML4435IS的Datasheet PDF文件第5页 浏览型号ML4435IS的Datasheet PDF文件第6页 浏览型号ML4435IS的Datasheet PDF文件第7页 浏览型号ML4435IS的Datasheet PDF文件第8页 浏览型号ML4435IS的Datasheet PDF文件第9页  
100%
PRELIMINARY
ML4435 Sensorless BLDC Motor Controller
GENERAL DESCRIPTION
The ML4435 provides all the circuitry for sensorless
speed control of 3 phase Brushless DC Motors. Controller
functions include start-up circuitry, Back EMF commuta-
tion control, Pulse Width Modulation (PWM) speed con-
trol, pulse-by-pulse current limiting, motor coasting, and
under-voltage protection.
Motor starting is accomplished by commutating the motor
at a low frequency to produce low speed motion. The
low speed motion is used to generate a Back EMF signal.
A back EMF sampling circuit locks on to the motors posi-
tion and controls commutation timing by forming a phase
locked loop (PLL). The commutation control circuitry also
outputs a speed feedback signal used in the speed control
loop. The speed control loop consists of an error amplifier
and PWM comparator that produces a PWM duty cycle
for speed regulation. Motor current is limited by a pulse-
by-pulse PWM shutdown comparator that is tripped by
the voltage across an external current sense resistor. Com-
mutation control, PWM speed control, and current limit-
ing are combined to produce the output driver signals.
Six output drivers are used to provide gating signals to an
external 3 phase bridge power stage sized for the Brush-
less DC (BLDC) motor voltage and current requirements.
Additional functions include a motor coast function and
an under voltage lock out circuit to shut down the output
drivers in the event of a low voltage condition on the VCC
to the ML4435.
FEATURES
n
Proprietary back-EMF sensing commutation technique
for motor communication without hall effect sensors
n
PWM pulse-by-pulse current limiting to protect motor
and FET drivers
n
Stand-alone operation; motor starts and stops with
power applied to the IC*
n
Soft-start function limits start-up current
n
PWM speed control for efficiency and minimum FET
sizing
n
Onboard under voltage lock out and power fail detect
n
Tach output senses commutation of the motor
* Some External Components Required.
PRELIMINARY DATASHEET
May, 2000
首页 - - 友情链接
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号


粤ICP备13051289号-7