电子元器件数据表 IC PDF查询
English 中文版
  品牌   我要上传
型号:  
描述:
MRBA-2-6SKGRA  MRBA-2-6UGXPC  MRBA-2-6CUG  MRBA-2-6CKGRA  MRBA-2-6KGX  MRBA-2-6CSKRA  MRBA-2-6CKXRA  MRBA-3-3SUXRA  MRBA-2-6CKGX  MRBA-2-6CSUGXPC  
ML4771 High Current Boost Regulator
型号:   ML4771
PDF文件: 下载PDF文件   鼠标右键选目标另存为
网页直接浏览   不需安装PDF阅读软件
在线打开PDF文件   需安装PDF阅读软件
描述:   High Current Boost Regulator
文件大小 :   192 K    8 页
Logo:   
品牌   MICRO-LINEAR [ MICRO LINEAR CORPORATION ]
购买 :   
  浏览型号ML4771的Datasheet PDF文件第2页 浏览型号ML4771的Datasheet PDF文件第3页 浏览型号ML4771的Datasheet PDF文件第4页 浏览型号ML4771的Datasheet PDF文件第5页 浏览型号ML4771的Datasheet PDF文件第6页 浏览型号ML4771的Datasheet PDF文件第7页 浏览型号ML4771的Datasheet PDF文件第8页  
100%
July 2000
ML4771*
High Current Boost Regulator
GENERAL DESCRIPTION
The ML4771 is a continuous conduction boost regulator
designed for DC to DC conversion in multiple cell battery
powered systems. Continuous conduction allows the
regulator to maximize output current for a given inductor.
The maximum switching frequency can exceed 200kHz,
allowing the use of small, low cost inductors. The ML4771
is capable of start-up with input voltages as low as 1.8V,
and the output voltage can be set anywhere between 3.0V
and 5.5V by an external resistor divider connected to the
SENSE pin.
An integrated synchronous rectifier eliminates the need
for an external Schottky diode and provides a lower
forward voltage drop, resulting in higher conversion
efficiency. In addition, low quiescent battery current and
variable frequency operation result in high efficiency even
at light loads. The ML4771 requires a minimum number of
external components to build a very small regulator circuit
capable of achieving conversion efficiencies exceeding
85%.
FEATURES
s
Guaranteed full load start-up and operation at
1.8V input
Continuous conduction mode for high output current
Very low supply current (20µA output referenced) for
micropower operation
Pulse Frequency Modulation and Internal Synchronous
Rectification for high efficiency
Maximum switching frequency > 200kHz
Minimum external components
Low ON resistance internal switching FETs
Adjustable output voltage (3.0V to 5.5V)
s
s
s
s
s
s
s
(* Indicates Part is End Of Life as of July 1, 2000)
BLOCK DIAGRAM
L1
1
VL1
VIN
2
*CIN
6
VL2
VOUT
5
VOUT
R1
VBAT
COUT
GND
3
BOOST
CONTROL
SENSE
4
R2
*CFB
PWR GND
8
1
首页 - - 友情链接
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号


粤ICP备13051289号-7