ATM UTP Transceiver
The ML6672 is a complete monolithic transceiver for
155Mbps NRZ encoded data transmission over Category 5
Unshielded Twisted Pair and Shielded Twisted Pair cables.
The ML6672 is compliant with the ATM Forum 155Mbps
Twisted Pair Specification. The adaptive equalizer in the
ML6672 will accurately compensate for line losses of up
to 100m of UTP. The part requires only external 1%
resistors for accurate equalization.
The ML6672 receive section consists of an equalizing filter
with a feedback loop for controlling effective line
compensation. The feedback loop contains a filter and
detection block for determining the proper control signal.
An ECL 100K compatible buffer at the output interfaces
directly with ATM physical interface chips.
The ML6672 transmit section accepts ECL 100K
compatible NRZ inputs.
Several additional functions are provided by the ML6672
to simplify applications. A common-mode reference is
provided to set the input DC level for the equalizer and
the near-end transformer winding. This terminal may be
used as an AC ground for the transformer center-tap or
termination resistors. A link status circuit monitors line
integrity and provides a proper logic level output signal to
interface with the host system.
The ML6672 is implemented in a BiCMOS process. A
differential signal path throughout minimizes the effects of
power supply transients and noise.
Complies with ATM Forum 155Mbps Twisted Pair
Transmitter can be externally turned off for
true quiet line
Receiver includes adaptive equalizer
Operates over 100 meters of STP or category 5 UTP
Twisted Pair Cable
Semi-standard options available
* This Part Is End Of Life As Of August 1, 2000
r New D
RVCCA RVCCD CMREF
|首页 - - 友情链接|
|Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM