CMD298C4-EVB [QORVO]
17-25 GHz Low Noise Amplifier;型号: | CMD298C4-EVB |
厂家: | Qorvo |
描述: | 17-25 GHz Low Noise Amplifier |
文件: | 总13页 (文件大小:322K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CMD298C4
®
17-25 GHz Low Noise Amplifier
Product Overview
The CMD298C4 is a highly efficient GaAs MMIC low noise
amplifier housed in a leadless 4x4 mm surface mount
package. The CMD298C4 is ideally suited for EW and
communications systems where small size and low power
consumption are needed. The device is optimized for 21
GHz and delivers greater than 27 dB of gain with a
corresponding noise figure of 1.4 dB and output 1 dB
compression point of +8 dBm. The CMD298C4 is a 50 ohm
matched design which eliminates the need for external DC
blocks and RF port matching.
Key Features
• Ultra Low Noise Performance
• High Gain
Functional Block Diagram
• All Positive Supply Voltages
• Low Current Consumption
• Pb-Free RoHs Compliant 4x4 QFN Package
Ordering Information
Part No.
Description
CMD298C4
100 pcs on 7” reel
CMD298C4-EVB Evaluation Board
Electrical Performance (Vdd = 3.0 V, Vgg = 1.5 V, TA = 25o C, F = 21 GHz)
Parameter
Min
Typ
17 - 25
27
Max
Units
GHz
dB
Frequency Range
Gain
Noise Figure
Input Return Loss
Output Return Loss
Output P1dB
Output IP3
1.4
10
dB
dB
20
dB
8
dBm
dBm
mA
19
Supply Current
27
Data Sheet | August 23, 2021 | Subject to change without notice
1 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
4 V
Parameter
Min
Typ
3.0
27
Max Units
Drain Voltage, Vdd
Vdd
Idd
1.5
3.3
V
mA
V
Gate Voltage, Vgg
3.25 V
RF Input Power
+20 dBm
150° C
Vgg
0
1.5
3.0
Electrical performance is measured at specific test conditions.
Electrical specifications are not guaranteed over all recommended
operating conditions.
Channel Temperature, Tch
Power Dissipation, Pdiss
Thermal Resistance, QJC
Operating Temperature
Storage Temperature
499 mW
120.26° C/W
-40 to 85° C
-55 to 150° C
Exceeding any one or combination of the maximum ratings may cause
permanent damage to the device.
Electrical Specifications (Vdd = 3.0 V, Vgg = 1.5 V, TA = 25o C)
Parameter
Min
Typ
17 - 22
27.5
1.5
Max
Min
Typ
22 - 25
26
Max
Units
GHz
dB
Frequency Range
Gain
24
22
Noise Figure
2
1.4
2
dB
Input Return Loss
Output Return Loss
Output P1dB
10
13
dB
10
12
dB
8
9
dBm
dBm
mA
Output IP3
18
20
Supply Current
19
27
35
19
27
35
Gain Temperature Coefficient
Noise Figure Temperature Coefficient
0.02
0.007
0.02
0.007
dB/°C
dB/°C
Data Sheet | August 23, 2021 | Subject to change without notice
2 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Typical Performance
Broadband Performance, Vdd = 3.0 V, Vgg = 1.5 V, Idd = 27 mA, TA = 25o C
30
25
20
15
10
5
2.5
2.25
2
1.75
1.5
1.25
1
S11
S22
S21
NF
0
-5
0.75
0.5
0.25
0
-10
-15
-20
12
14
16
18
20
22
24
26
28
30
Frequency/GHz
Narrow-band Performance, Vdd = 3.0 V, Vgg = 1.5 V, Idd = 27 mA, TA = 25o C
30
25
20
15
10
5
2.5
2.25
2
1.75
1.5
1.25
1
S11
S22
S21
NF
0
-5
0.75
0.5
0.25
0
10
15
-20
17
18
19
20
21
22
23
24
25
Frequency/GHz
Data Sheet | August 23, 2021 | Subject to change without notice
3 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Typical Performance
Gain vs. Temperature, Vdd = 3.0 V, Vgg = 1.5 V
30
29
28
27
26
25
24
23
22
21
20
19
18
17
+25C
+85C
-40C
16
17
18
19
20
21
22
23
24
25
Frequency/GHz
Gain vs. Vdd, Vgg = 1.5 V, TA = 25o C
30
29
28
27
26
25
24
23
22
21
20
19
18
17
Vdd=1.5V
Vdd=2V
Vdd=3V
16
17
18
19
20
21
22
23
24
25
Frequency/GHz
Data Sheet | August 23, 2021 | Subject to change without notice
4 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Typical Performance
Noise Figure vs. Temperature, Vdd = 3.0 V, Vgg = 1.5 V
3
2.8
2.6
2.4
2.2
2
+25C
+85C
-40C
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
17
18
19
20
21
22
23
24
25
Frequency/GHz
Noise Figure vs. Vdd, Vgg = 1.5 V, TA = 25o C
3
2.8
2.6
2.4
2.2
2
Vdd=1.5V
Vdd=2V
Vdd=3V
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
17
18
19
20
21
22
23
24
25
Frequency/GHz
Data Sheet | August 23, 2021 | Subject to change without notice
5 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Typical Performance
P1dB vs. Temperature, Vdd = 3.0 V, Vgg = 1.5 V
15
14
13
12
11
10
9
+25C
+85C
-40C
8
7
6
5
4
3
2
1
0
17
18
19
20
21
22
23
24
25
Frequency/GHz
P1dB vs. Vdd, Vgg = 1.5 V, TA = 25o C
15
14
13
12
11
10
9
Vdd=1.5V
Vdd=2V
Vdd=3V
8
7
6
5
4
3
2
1
0
17
18
19
20
21
22
23
24
25
Frequency/GHz
Data Sheet | August 23, 2021 | Subject to change without notice
6 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Typical Performance
Psat vs. Temperature, Vdd = 3.0 V, Vgg = 1.5 V
15
14
13
12
11
10
9
+25C
+85C
-40C
8
7
6
5
4
3
2
1
0
17
18
19
20
21
22
23
24
25
Frequency/GHz
Psat vs. Vdd, Vgg = 1.5 V, TA = 25o C
15
14
13
12
11
10
9
Vdd=1.5V
Vdd=2V
Vdd=3V
8
7
6
5
4
3
2
1
0
17
18
19
20
21
22
23
24
25
Frequency/GHz
Data Sheet | August 23, 2021 | Subject to change without notice
7 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Typical Performance
Output IP3 vs. Temperature, Vdd = 3.0 V, Vgg = 1.5 V
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
+25C
+85C
-40C
10
17
18
19
20
21
22
23
24
25
Frequency/GHz
Output IP3 vs. Vdd, Vgg = 1.5 V, TA = 25o C
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
Vdd=1.5V
Vdd=2V
Vdd=3V
8
7
6
5
17
18
19
20
21
22
23
24
25
Frequency/GHz
Data Sheet | August 23, 2021 | Subject to change without notice
8 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Mechanical Information
Package Information and Dimensions
Notes:
1. All dimensions shown in mm.
2. Material: Black alumina
3. Lead finish:
3.1. Ni: 8.89um max 1.27um min
3.2. Pd: 0.17um max, 0.07um min
3.3. Au: 0.254um max, 0.03um min
4. Marking
4.1. Line 1: Part number
4.1.1. Example: CMD191C4 shall be marked as CM191
4.2. Line 2: Lot number
4.3. Line 3: Date code - Last 2 digits of the year of manufacture followed by a 2 digit week code
5. Alternate pin #1 identifier is a single square pad
6. Alternate die paddle may have chamfered corners
Recommended PCB Land Pattern
Qorvo recommends that the user develop the land pattern that will provide the best design for proper solder reflow and
device attach for their specific application. Please review Qorvo Application Note AN 105 for a recommended land pattern
approach.
Recommended Solder Reflow Profile
Qorvo recommends screen printing with belt furnace reflow to ensure proper solder reflow and device attach. Please
review Qorvo Application Note AN 102 for a recommended solder reflow profile.
Data Sheet | August 23, 2021 | Subject to change without notice
9 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Pin Description
Functional Description
Pin
Function
Description
Schematic
No connection required
These pins may be connected to RF / DC
ground
1, 2, 6 - 13, 17,
18, 20 - 23
N/C
GND
3, 5, 14, 16
and die paddle
Ground
Connect to RF / DC ground
RF in
4
RF in
DC blocked and 50 ohm matched
DC blocked and 50 ohm matched
RF out
15
RF out
Vdd
Power supply voltage
Decoupling and bypass caps required
19
24
Vdd
Vgg
Power supply voltage
Decoupling and bypass caps required
Vgg
Data Sheet | August 23, 2021 | Subject to change without notice
10 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Applications Information
Application Circuit
Biasing and Operation
The CMD298C4 is biased with a positive drain supply and positive gate supply. Sequencing of the drain and gate supply
is not required. Performance is optimized when the drain voltage is set to +3.0 V, though it may be set to a minimum of
+1.5 V and a maximum of +3.5 V. The recommended gate voltage is +1.5 V.
Turn ON procedure:
1. Apply drain voltage Vdd and set to +3 V
2. Apply gate voltage Vgg and set to +1.5 V
Turn OFF procedure:
1. Turn off gate voltage Vgg
2. Turn off drain voltage Vdd
Refer to Application Note 103: Amplifier Biasing Techniques for instructions on how to implement a single supply biasing
scheme.
RF power can be applied at any time.
Data Sheet | August 23, 2021 | Subject to change without notice
11 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Applications Information
Evaluation Board
The circuit board shown has been developed for optimized assembly at Qorvo. A sufficient number of via holes should be
used to connect the top and bottom ground planes. As surface mount processes vary, careful process development is
recommended.
Designator
J1, J2
Value
Description
SMA End Launch Connector
P1
10 Pin Header
Capacitor, Tantalum
C1, C2
C3,C4
C5, C6
U1
0.33 µF
1000 pF
100 pF
Capacitor, 0603
Capacitor, 0402
CMD298C4 Low Noise Amplifier
CM1076A Evaluation PCB
PCB
GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be
observed during handling, assembly and test.
Data Sheet | August 23, 2021 | Subject to change without notice
12 of 13
www.qorvo.com
CMD298C4
®
17-25 GHz Low Noise Amplifier
Handling Precautions
Parameter
Rating
Class 1A
Level 1
Standard
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀHuman Body Model (HBM)
ESDAꢁ/ꢁJEDEC JS-001-2012
MSLꢀ–ꢀMoisture Sensitivity Level
IPC/JEDEC J-STD-020
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
•
•
•
•
•
•
Lead Free
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
PFOS Free
Halogen Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained in this Data Sheet and any associated documents (“Data Sheet Information”) is believed to be
reliable; however, Qorvo makes no warranties regarding the Data Sheet Information and assumes no responsibility or
liability whatsoever for the use of said information. All Data Sheet Information is subject to change without notice.
Customers should obtain and verify the latest relevant Data Sheet Information before placing orders for Qorvo® products.
Data Sheet Information or the use thereof does not grant, explicitly, implicitly or otherwise any rights or licenses to any
third party with respect to patents or any other intellectual property whether with regard to such Data Sheet Information
itself or anything described by such information.
DATA SHEET INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS
DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH
PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo® products are not
warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other
applications where a failure would reasonably be expected to cause severe personal injury or death. Applications
described in the Data Sheet Information are for illustrative purposes only. Customers are responsible for validating that a
particular product described in the Data Sheet Information is suitable for use in a particular application.
© 2020 Qorvo US, Inc. All rights reserved. This document is subject to copyright laws in various jurisdictions worldwide
and may not be reproduced or distributed, in whole or in part, without the express written consent of Qorvo US, Inc. |
QORVO® is a registered trademark of Qorvo US, Inc.
Data Sheet | August 23, 2021 | Subject to change without notice
13 of 13
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明