QM13341SB [QORVO]
4xSPST (Single-Pole-Single-Throw Switch);
| 型号： | QM13341SB |
| 厂家： | 
Qorvo |
| 描述： | 4xSPST (Single-Pole-Single-Throw Switch) |
| 文件： | 总6页 (文件大小：428K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRELIMINARY
QM13341
4xSPST (Single-Pole-Single-Throw Switch)
Product Overview
QM13341 is the smallest 4xSPST with VRF >45Vp and low
RON. Excellent performance in a small solution size enables
creation of antenna tuning solutions optimum for 5G
applications.
10 Pin 1.1x1.5x0.4 mm Module Package
Key Features
• Low RON: 1.2Ω
• Low COFF: 140fF
• High RF voltage handling capability: >45Vp
• 3 unique selectable USID using external pin, ID
• Small size 1.1mm x 1.5mm, module package
• > 2kV HBM ESD Protection on all pins
• RFFE 2.1 capable
• Suitable for all mobile applications including 5G & WiFi
Functional Block Diagram
Applications
• Antenna Tuning
• Band Switching
• Impedance Tuning
GND
GND
Ordering Information
RFFE Interface & Control
TOP VIEW
Part Number
QM13341DK
Description
Design Kit
QM13341SB
5-pc Sample Bag
100-pc 7” Reel
10000-pc 13” Reel
QM13341SR
QM13341TR13-10K
Top View
QM13341 Product Brief
www.qorvo.com
1 of 6
PRELIMINARY
QM13341
4xSPST (Single-Pole-Single-Throw Switch)
Electrical Specifications
Test conditions unless otherwise stated: all unused RF ports terminated in 50Ω, Input and Output = 50Ω, T = 25°C, VIO = 1.8V,
SDATA/SCLK = 1.8 V / 0 V.
PARAMETER
CONDITIONS
MIN.
TYP.
65
MAX.
UNITS
dB
700 – 915 MHz
915 – 1910 MHz
1910 – 2700 MHz
3300 – 4200 MHz
4200 – 5000 MHz
700 – 915 MHz
915 – 1910 MHz
1910 – 2700 MHz
3300 – 4200 MHz
4200 – 5000 MHz
61
dB
Isolation:
RF1 – RF3 & RF2 – RF4
OFF-STATE
58
dB
57
dB
57
dB
36
dB
32
dB
Isolation:
RF1 – RF2 & RF3 – RF4
OFF-STATE
28
dB
25
dB
24
dB
Second Harmonic
Third Harmonic
Second Harmonic
Third Harmonic
Second Harmonic
Third Harmonic
Second Harmonic
Third Harmonic
-102
-113
-77
-78
-73
-76
-92
-102
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
fo = 700MHz; Pin = 23dBm, OFF State
fo = 915MHz; Pin = 35dBm, OFF State
fo = 1910MHz; Pin = 33dBm, OFF State
fo = 2570MHz; Pin = 23dBm, OFF State
Pin Configuration and Description
1
2
3
4
10
9
8
7
6
PIN
1
LABEL
SDATA
SCLK
ID
DESCRIPTION
RFFE DATA Line
RFFE CLOCK Line
USID Select
VIO Supply
Ground
2
Top View
3
4
VIO
5
GND
RF4
6
RF Port 4
5
7
RF3
RF Port 3
8
RF2
RF Port 2
9
RF1
RF Port 1
Top View
10
GND
Ground
QM13341 Product Brief
www.qorvo.com
2 of 6
PRELIMINARY
QM13341
4xSPST (Single-Pole-Single-Throw Switch)
PCB Design Requirement
Package Outline Drawing and Branding Drawing (dimension in mm)
QM13341 Product Brief
3 of 6
www.qorvo.com
PRELIMINARY
QM13341
4xSPST (Single-Pole-Single-Throw Switch)
Branding Diagram
Carriers
Tape and Reel
Carrier tape basic dimensions are based on EIA 481. The pocket is designed to hold the part for shipping and loading onto SMT
manufacturing equipment, while protecting the body and the solder terminals from damaging stresses. The individual pocket design can
vary from vendor to vendor, but width and pitch will be consistent.
Carrier tape is wound or placed onto a shipping reel either 330 mm (13 inches) in diameter or 178 mm (7 inches) in diameter.
The center hub design is large enough to ensure the radius formed by the carrier tape around it does not put unnecessary stress
on the parts.
Prior to shipping, moisture sensitive parts (MSL level 2a-5a) are baked and placed into the pockets of the carrier tape. A cover tape is
sealed over the top of the entire length of the carrier tape. The reel is sealed in a moisture barrier ESD bag with the appropriate units of
desiccant and a humidity indicator card, which is placed in a cardboard shipping box. It is important to note that unused moisture
sensitive parts need to be resealed in the moisture barrier bag. If the reels exceed the exposure limit and need to be rebaked, most
carrier tape and shipping reels are not rated as bakeable at 125°C. If baking is required, devices may be baked according to section 4,
table 4-1, of Joint Industry Standard IPC/JEDEC J-STD-033.
The Table below provides useful information for carrier tape and reels used for shipping the devices described in this document.
Qorvo Part
Number
Reel Diameter
Inch (mm)
Hub Diameter Inch
(mm)
Pocket Pitch
(mm)
Width (mm)
Feed
Units Per Reel
QM13341TR13-10K
QM13341SR
13 (330)
7 (178)
4 (102)
2.5 (63)
8
8
4
4
Single
Single
10000
100
QM13341 Product Brief
www.qorvo.com
4 of 6
PRELIMINARY
QM13341
4xSPST (Single-Pole-Single-Throw Switch)
Tape and Reel
Measured at Hub
W1
D1
P2
Bo
D2
D4
B
P3
D3
P1
Ko Ao
W2
Measured at Hub
(Unless otherwise specified, all dimension tolerances per EIA-481)
Handling Precautions
Parameter
VALUE
Standard
Caution!
ESD – Human Body Model (HBM)
Class 1C
ESDA/JEDEC JS-001-2012
ESD sensitive device
Solderability
Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes.
Package lead plating: Electrolytic plated Au over Ni
QM13341 Product Brief
www.qorvo.com
5 of 6
PRELIMINARY
QM13341
4xSPST (Single-Pole-Single-Throw Switch)
RoHS Compliance
This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment), as amended by Directive 2015/863/EU.
This product also has the following attributes:
•
•
•
•
•
Lead free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or
liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the
latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to
any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS
INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND
ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
QM13341 Product Brief
www.qorvo.com
6 of 6
相关型号：
©2020 ICPDF网 联系我们和版权申明