QM25032SR [QORVO]
Band 1/3 Multiplexer;型号: | QM25032SR |
厂家: | Qorvo |
描述: | Band 1/3 Multiplexer |
文件: | 总19页 (文件大小:2109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QM25032
Band 1/3 Multiplexer
Product Overview
The QM25032 is the latest band 1 + band 3 multiplexer using
Qorvo’s patented technology to optimize performance required
in today’s handsets.
The QM25032 is designed to ensure minimal transmit insertion
loss in all bands being multiplexed without loading each other
while providing high cross-isolation which is critical to ensure
good receive performance. Additionally, the QM25032 is
capable of supporting higher power levels to overcome
additional front-end losses in today’s handsets.
6 Pin 2.5 x 2.0 x 0.54mm leadless SMT package
Key Features
The QM25032 uses common module packaging techniques to
enable a compact 2.5 mm x 2.0 mm footprint.
• Compact Form-Factor: 2.5mm x 2.0mm x 0.6mm
• Minimizes PA current drain with excellent TX IL
• Improved RX sensitivity with low RX IL
• Single-Ended
Functional Block Diagram
• RoHS Compliant, Pb-Free Module Package
Applications
• LTE/NR Mobile Products
o Handsets
o Datacards
• Carrier Aggregation
Ordering Information
Part Number
QM25032EVB
QM25032SB
QM25032SR
QM25032TR13
Description
Evaluation Board
5pc sample bag
100pcs on 7” reel
10,000pcs on 13” reel
Bottom View
QM25032 Data Sheet rev G
www.qorvo.com
1 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Absolute Maximum Ratings
Parameter
Conditions
Rating
Storage Temperature
-40 to +85°C
+31 dBm
CW
+55°C for 5k hours
RF Input Power (Pin1, Pin2)
FDD_UL_CP-OFDM_QPSK_5M_1RB@23
FDD_UL_CP-OFDM_QPSK_5M_1RB@24
CW, Max duration 500 ms
+29.5 dBm
+28 dBm
Peak RF Input Power (Pin 1, Pin2)
+34.5 dBm
Operation of this device outside the parameter ranges given above may cause permanent damage.
Recommended Operating Conditions
Parameter
Min.
Typ.
Max.
Units
TCASE
-30
85
°C
Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions.
QM25032 Data Sheet rev G
2 of 19
www.qorvo.com
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Electrical Specifications(1) Band 1 Transmit - Antenna
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.3(2)
1.6:1
1.5:1
58
Max.
Units
Insertion Loss
VSWR (TX Port)
VSWR (ANT Port)
1920 – 1980 MHz
-
2.3
dB
2:1
1920 – 1980 MHz
-
-
2:1
1495.9 – 1510.9 MHz
1559 – 1680 MHz
1805 – 1880 MHz
2010 – 2025 MHz
2110 – 2170 MHz
2400 – 2500 MHz
3640 – 3960 MHz
4900 – 5180 MHz
5180 – 5900 MHz
45
45
-
-
-
-
-
-
-
-
-
58
48
15(3)
60
20
Attenuation
50
69
dB
45
61
40
59
30
53
12
22
Notes:
1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic
2. Typical specified as mathematical average over frequency range at room temp
3. Operating Temp = +15 °C to +85 °C
QM25032 Data Sheet rev G
www.qorvo.com
3 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Electrical Specifications(1) Band 1 Antenna - Receive
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.2(2)
1.6:1
1.5:1
48
Max.
Units
Insertion Loss
VSWR (RX Port)
VSWR (ANT Port)
2110 – 2170 MHz
-
2.2
dB
2:1
2110 – 2170 MHz
-
-
2:1
1447 – 1463 MHz
1710 – 1785 MHz
1920 – 1980 MHz
2400 – 2500 MHz
4900 – 5180 MHz
5180 – 5900 MHz
40
48
49
50
30
25
-
-
-
-
-
-
54
56
Attenuation
Notes:
dB
62
53
53
1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic
2. Typical specified as mathematical average over frequency range at room temp
QM25032 Data Sheet rev G
www.qorvo.com
4 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Electrical Specifications(1) Band 3 Transmit - Antenna
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.3(2)
1.5:1
1.3:1
49
Max.
3(3)
2:1(4)
2:1(4)
Units
Insertion Loss
VSWR (TX Port)
VSWR (ANT Port)
1710 – 1785 MHz
-
dB
1710 – 1785 MHz
-
-
1559 – 1605 MHz
1805 – 1880 MHz
2110 – 2170 MHz
2400 – 2500 MHz
3420 – 3570 MHz
4900 – 5180 MHz
5180 – 5900 MHz
40
47(4)
50
-
-
-
-
-
-
-
60
62
Attenuation
Notes:
42
46
dB
25
39
18
31
18
25
1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic
2. Typical specified as mathematical average over frequency range at room temp
3. Operating Temp = −30ꢀ°C to +25ꢀ°C
4. Operating Temp = +25 °C to +85 °C
QM25032 Data Sheet rev G
www.qorvo.com
5 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Electrical Specifications(1) Band 3 Antenna - Receive
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.3(2)
1.5:1
1.4:1
57
Max.
3.2(3)
Units
Insertion Loss
VSWR (RX Port)
VSWR (ANT Port)
1805 – 1880 MHz
-
dB
2:1
1805 – 1880 MHz
-
-
2:1
1710 – 1785 MHz
1920 – 1980 MHz
2400 – 2500 MHz
4900 – 5180 MHz
5180 – 5900 MHz
40
48
40
40
30
-
-
-
-
-
53
Attenuation
Notes:
52
dB
51
54
1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic
2. Typical specified as mathematical average over frequency range at room temp
3. Operating Temp = +25ꢀ°C to +85ꢀ°C
Electrical Specifications(1) Isolation
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
55(2)
55
Typ.
62
59
69
59
61
55
57
64
Max.
Units
B3 TX-RX Isolation in B3 RX
B3 TX-RX Isolation in B3 TX
B1 TX-RX Isolation in B1 RX
B1 TX-RX Isolation in B1 TX
B1 TX to B3 RX Isolation in B3 RX
B1 TX to B3 RX Isolation in B1 TX
B3 TX to B1 RX Isolation in B3 TX
B3 TX to B1 RX Isolation in B1 RX
Notes:
1805 – 1880 MHz
1710 – 1785 MHz
2110 – 2170 MHz
1920 – 1980 MHz
1805 – 1880 MHz
1920 – 1980 MHz
1710 – 1785 MHz
2110 – 2170 MHz
-
-
-
-
-
-
-
-
55
50
dB
55
52
53
55
1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic
2. Integrated over 5MHz Bandwidth
QM25032 Data Sheet rev G
www.qorvo.com
6 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Application Circuit Schematic
Note:
B1 TX (pin 1) and B3 TX (pin 2) are terminated with complex impedance to provide flexible matching options for optimizing TX
performance between PA and QM25032. All other ports are matched to 50 ohm impedance
Bill of Materials
Ref. Des.
U1
Value
N/A
Description
Manuf.
Part number
Band 1/3 Multiplexer
4-layer Printed Circuit Board
Qorvo
QM25032
PCB
N/A
QM25032 Data Sheet rev G
www.qorvo.com
7 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Performance Plots – Passband
Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Data Sheet rev G
www.qorvo.com
8 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Performance Plots – Narrowband
Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Data Sheet rev G
www.qorvo.com
9 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Performance Plots – Wideband
Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Data Sheet rev G
www.qorvo.com
10 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Performance Plots – ANT Port Return Loss/Impedance
Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Data Sheet rev G
11 of 19
www.qorvo.com
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Performance Plots – TX & RX Return Loss/Impedance
Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Data Sheet rev G
12 of 19
www.qorvo.com
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Performance Plots – Isolation
Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Data Sheet rev G
www.qorvo.com
13 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Pin Configuration and Description
Bottom View
Pin Number
Label
B1 TX
B3 TX
ANT
Description
1
2
3
4
5
6
Band 1 Transmit Port
Band 3 Transmit Port
Band 1/3 Antenna Port
Band 1 Receive Port
Band 3 Receive Port
Package Ground
B1 RX
B3 RX
GND
QM25032 Data Sheet rev G
www.qorvo.com
14 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Package Marking and Dimensions
Package Marking Diagram
Package Outline Dimension Drawing
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012
QM25032 Data Sheet rev G
www.qorvo.com
15 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Mechanical Information
Pin Dimensions - Bottom View
Recommended Solder Stencil– Top View
Recommended Land Pattern – Top View
Recommended Land Pattern Mask – Top View
QM25032 Data Sheet rev G
Subject to change without notice
www.qorvo.com
16 of 19
QM25032
Band 1/3 Multiplexer
Tape and Reel Information – Carrier and Cover tape Dimensions
Feature
Measure
Symbol
Size (mm)
Feature
Measure
Symbol
Size (mm)
Diameter
D1
W2
W1
D2
D3
B
330.0
14.2
8.8
Length
Width
Depth
Pitch
Ao
Bo
Ko
P1
P2
P3
W
2.20
2.70
1.0
Flange
Thickness
Cavity
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
102.0
13.0
2.0
4.0
Cavity to Perforation (Length)
Cavity to Perforation (Width)
Width
2.0
Centerline
Distance
Hub
3.5
Key Slit Diameter
D4
20.2
Carrier Tape
8.0
(Unless otherwise specified, all dimension tolerances per EIA-481)
QM25032 Data Sheet rev G
www.qorvo.com
17 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Handling Precautions
PARAMETER
RATING
1C
STANDARD
Caution!
ESD – Human Body Model (HBM)
ESD – Charged Device Model (CDM)
MSL – Moisture Sensitivity Level
ESDA/JEDEC JS-001
ESDA/JEDEC JS-002
IPC/JEDEC J-STD-020
C3
ESD sensitive device
MSL3
Solderability
Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes.
Package lead plating: Electrolytic plated Au over Ni
RoHS Compliance
This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment), as amended by Directive 2015/863/EU.
This product also has the following attributes:
•
•
•
•
•
Lead free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
Pb
QM25032 Data Sheet rev G
www.qorvo.com
18 of 19
Subject to change without notice
QM25032
Band 1/3 Multiplexer
Revision History
DATE
REVISION
NOTES
(YYYYMMDD)
E
F
20200219 Initial Production Release
20210222 Updated Power Ratings Specs
20210318 Updated Power Ratings Specs
G
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or
liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the
latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to
any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS
INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND
ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
www.qorvo.com
19 of 19
QM25032 Data Sheet rev G
Subject to change without notice
相关型号:
©2020 ICPDF网 联系我们和版权申明