QPB0066SQ [QORVO]
Digital Controlled Variable Gain Amplifier (5 - 500 MHz);型号: | QPB0066SQ |
厂家: | Qorvo |
描述: | Digital Controlled Variable Gain Amplifier (5 - 500 MHz) |
文件: | 总15页 (文件大小:1110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Product Overview
The QPB0066 is a digital controlled variable gain
amplifier featuring high linearity over the entire gain
control range with noise figure less of 4.3ꢀdB in its
maximum gain state. The gain of the dual 6-bit digital
step attenuators programmed with a 12-bit Serial
Peripheral Interface (SPI). The QPB0066 is packaged
in a small 6.0ꢀmmꢀxꢀ6.0ꢀmm leadless laminate MCM,
which contains plated through thermal vias for ultra-
low thermal resistance. The module is easy to use
with a few external DC blocks and RF chokes.
28-Pin, 6.0ꢀmmꢀxꢀ6.0ꢀmm MCM
Functional Block Diagram
Key Features
•
•
•
•
•
•
•
5ꢀMHz to 500ꢀMHz Operation
Dual 6-Bit Digital Step Attenuator
SPI Serial Control Programming
Max Gainꢀ=ꢀ44ꢀdB at 100ꢀMHz
Gain Control Rangeꢀ=ꢀ63ꢀdB (0.5ꢀdB Steps)
High OIP3ꢀ/ꢀP1dBꢀ=ꢀ+38ꢀdBmꢀ/ꢀ22.6ꢀdBm
+5ꢀV Supply for DSA and +8ꢀV Supply for
Amplifier with a Drop Resistor
•
•
Small 28-Pin, 6.0ꢀmmꢀxꢀ6.0ꢀmm MCM
Power-up Programming
Applications
•
•
•
•
•
High Linearity Power Control
Top View
CATV Drivers
Transceiver IF DVA
Cellular, PCS, GSM, UMTS
Wireless Data, Satellite Terminals
Ordering Information
Part Number
QPB0066SQ
QPB0066SR
QPB0066TR13
QPB0066PCK
Description
Sample bag with 25 pieces
7" Reel with 100 pieces
13" Reel with 2500 pieces
5ꢀ–ꢀ500ꢀMHz PCBA with 5 pc sample bag
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 1 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Absolute Maximum Ratings
Parameter
Supply Voltage (VDD) for DSAꢀ
Rating
-0.5 to +5.75ꢀV
+7ꢀV
VDMAX (device voltage at RFOUT pins)
Supply Current (ICC) for amplifiers
Power Dissipation for each amplifier
Maximum RF Input Power
340ꢀmA
1980ꢀmW
+16ꢀdBm
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
−40 to +85ꢀ°C
−65 to +150ꢀ°C
+125ꢀ°C
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of
Absolute Maximum Rating conditions to the device may reduce device reliability.
Electrical Specifications
Parameter
Condition (1)
Min
3.0
Typ
5.0
Max
5.5
Unit
V
Attenuator Supply Voltage
Attenuator Supply Current
Amplifier Supply Voltage (2)
Amplifier Supply Current
Frequency Range
Max Gain
500
5.0
μA
V
250
mA
MHz
dB
5
500
Attenuationꢀ=ꢀ0ꢀdB
42
Gain Control Range
Step Accuracy
63.0
dB
Major state error up to 250ꢀMHz
Attenuationꢀ=ꢀ0ꢀdB
+/- 0.2 +4% attenuation setting
dB
P1dB
22.5
36
dBm
dBm
bit
Output IP3
POUT = 0ꢀdBmꢀ/ꢀtone, 1ꢀMHz spacing
SPI Interface
Control Interface
Switching Speed
Noise Figure
12
50% Control to 10%/90% RF
Attenuationꢀ=ꢀ0ꢀdB
120
4.3
50
ns
dB
Impedance
ꢀΩ
Input Return Loss
Output Return Loss
Thermal Resistance
Notes:
At Maximum Gain
At Maximum Gain
ΘJC
24
dB
12
dB
70
˚Cꢀ/ꢀW
1. Typical performance at these conditions: Temp = +25ꢀ°C, VDD = +5ꢀV, 50ꢀΩ system, Full band unless otherwise noted
2. VD at the RF output pins
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 2 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Evaluation Board Schematic (5 – 500ꢀMHz)
Notes:
1. QPB0066-4000(B) removes unused capacitor pads and test path from QPB0066-4000(A). All other connections and programming remain the
same.
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 3 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Evaluation Board Bill of Materials
Designator
Description
Manufacturer
Part Number
QPB0066-4000(B)
QPB0066SB
PCB
QPB0066 PCB Board
Qorvo
Qorvo
U1
Digital Controlled Variable Gain Amplifier
CAP, 2.2uF, 10%, 10V, X5R, 0603
CAP, 0.01uF, ±10%, 50V, X7R, 0402
CAP, 47pF, 5%, 50V, C0G, 0402
CAP, 1000pF, 10%, 50V, X7R, 0402
CAP, 10uF, 10%, 16V, TANT-B
C1, C17
C22, C101
C100, C102
C8, C18
C10, C20
Murata Electronics
Murata Electronics
Murata Electronics
Taiyo Yuden (USA), Inc.
AVX Corporation
Murata Electronics
AVX Asia Limited
Murata Electronics
Kamaya, Inc
GRM188R61A225KE34D
GRM155R71H103KA88D
GRM1555C1H470JA01D
RM UMK105BJ102KV-F
TAJB106K016R
C9, C19, C103, C104 CAP, 0.1uF, 10%, 16V, X7R, 0402
GRM155R71C104KA88D
0805YC475KAT2A
GRM155C71A105KE11D
RMC1/20-102JPA15
RMC1/16SJPTH
C105
CAP, 4.7uF, 10%, 16V, X7R, 0805
CAP, 1uF, 10%, 10V, X7S, 0402
RES, 1K, 5%, 1/20W, 0201
C6, C7, C16, C23
R6, R7, R8, R9
R102
RES, 0 OHM, 5%, 1/10W, 0402
RES, 100K, 5%, 1/16W, 0402
Kamaya, Inc
R5
Kamaya, Inc
RMC1/16S-104JTH
RMC1/16S-202JTH
ERJ-14NF23R2U
150060GS75000
1008CS-472XJRC
BLM18AG102SN1D
FT232RQ
R100, R101
R1, R3
D100, D101
L1, L2
RES, 2K, 5%, 1/16W, 0402
Kamaya, Inc
RES, 23.2 OHM, 1%, 1/2 W, 1210
LED, GRN, CLR, 3.2V, 30mA, 0603
IND, 4.7uH, 5%, 260mA, W/W, 1008
FER, BEAD, 1K, 100mA, 0603
IC, USB-UART, 3.3-5.25V,QFN-32
CONN, HDR, ST, 2x4, 0.100"
Panasonic Industrial Devices
Wurth Elektronik
Coilcraft, Inc.
FB100
Murata Electronics
Future Technology Devices Int'l
Samtec, Inc.
U100
P2
TSW-104-14-G-D
901-10426
J1, J2
CONN, SMA, EL, FLT, 0.068" SPE-000318
CONN, HDR, RT-ANG, 4 POS, 0.100", T/H
CONN, USB, MINI-B, RT ANG, 5-PIN, T/H
CONN, HDR, ST, 2x5, 0.100"
Amphenol RF Asia Corp
3M Interconnect Solutions
Molex
P1
961104-5604-AR
054819-0519
J100
P3
Samtec, Inc.
TSW-105-08-L-D
N/A
R4, C106
Not Populated
N/A
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 4 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Evaluation Board Assembly Drawing
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 5 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Typical Application Schematic (5-500MHz)
Required Bias Resistance for ICC = 125ꢀmA (one amplifier):
Bias Resistance = RBIAS+ RCHOKE = (VCC – VDD) / ICC
(VCC: Amplifier supply voltage; VD: Amplifier device voltage at the RF output ~4.75 to 5.0ꢀV; RBIAS: Bias Resistor; RCHOKE: DCR of Bias Choke
Total Bias Resistance (RBIAS + RCHOKE
)
Supply Voltage 7V
8V
9V
10V
Bias Resistance
18.0
26.0
34.0
58.0
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 6 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Performance Data: 5ꢀ–ꢀ500ꢀMHz Broadband Application Circuit (1)
Notes:
1. Typical performance at these conditions: Temp = +25ꢀ°C, VDD = +5ꢀV, VCC = +8ꢀV, Maximum Gain, 50ꢀΩ system, Full band unless otherwise
noted.
2. 0ꢀdBmꢀ/ꢀtone.
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 7 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Performance Data: 5ꢀ–ꢀ500ꢀMHz Broadband Application Circuit (1)
Notes:
(1) Typical performance at these conditions: Temp = +25ꢀ°C, VDD = +5ꢀV, VCC = +8ꢀV, Maximum Gain, 50ꢀΩ system, Full band unless otherwise
noted.
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 8 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Performance Data: 5ꢀ–ꢀ500ꢀMHz Broadband Application Circuit (1)
Notes:
(1) Typical performance at these conditions: Temp = +25ꢀ°C, VDD = +5ꢀV, VCC = +8ꢀV, Maximum Gain, 50ꢀΩ system, Full band unless otherwise
noted.
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 9 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Truth Table: DSA1 Control Bit
D5
1
D4
D3
1
D2
1
D1
1
D0
1
Gain Relative to Maximum Gain
1
0ꢀdBm
-0.5ꢀdBm
-1ꢀdBm
1
1
1
1
1
0
1
0
1
0
1
1
1
0
1
1
1
1
1
1
-2ꢀdBm
1
0
1
1
1
-4ꢀdBm
0
1
1
1
1
-8ꢀdBm
1
1
0
1
1
-16ꢀdBm
-31.5ꢀdBm
1
1
0
0
0
0
0
Truth Table: DSA2 Control Bit
D11
D10
D9
1
D8
1
D7
1
D6
1
Gain Relative to Maximum Gain
1
1
1
1
1
1
0
0
1
1
1
1
1
0
1
0
0ꢀdBm
-0.5ꢀdBm
-1ꢀdBm
1
0
1
1
0
1
1
1
1
1
-2ꢀdBm
1
0
1
1
-4ꢀdBm
0
1
1
1
-8ꢀdBm
1
1
1
1
-16ꢀdBm
-31.5ꢀdBm
1
1
0
0
0
0
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 10 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Power-up Programming Truth Table
Logic Voltage Levels
PUP
Attenuator Setting
State
Low
Logic
Low
Maximum = 63ꢀdB
0 to 0.8ꢀV
2.0 to 5.0ꢀV
High
Minimum = 0ꢀdB
High
SPI Timing Diagram
t6
t1
t2
t3
t8
t4
t5
CLK
DATA
LE
t7
t9
DOUT
t10
SPI Timing Diagram Specifications
Parameter
Limit
25
20
20
5
Unit
Comment
CLK Frequencyꢀ
CLK High
t1
t2
t3
t4
t5
t6
t7
t8
t9
t10
MHz max
ns min
ns min
ns min
ns min
ns min
ns min
ns min
ns min
CLK Low
DATA to CLK Setup Time
DATA to CLK Hold Time
DATA Valid
5
30
5
LE to CLK Setup Time
CLK to LE Setup Time
LE Pulse Width
5
10
20
ns max
Output Set
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 11 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Pin Configuration and Description
Pin Number
Label
AMP1_IN
DSA1_OUT
NC
Description
1
AMP1 Input
2
DSA1 Output
3
Not Connected Internally
Not Connected Internally
Not Connected Internally
Not Connected Internally
DSA1 Input
4
NC
5
NC
6
NC
7
DSA1_IN
GND
8
RF/DC Ground Connection
Power Up Programming Pin
Serial Data Input
9
PUP
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
DATA
LE
Serial Latch Enable
CLK
Serial Clock Input
VDD
Supply Voltage for DSA and SPI Control
RF/DC Ground Connection
AMP2 OUT and Bias Pin
RF/DC Ground Connection
RF/DC Ground Connection
AMP2 Input
GND
AMP2_OUT
GND
GND
AMP2_IN
DSA2_OUT
GND
DSA2 Output
RF/DC Ground Connection
Not Connected Internally
Not Connected Internally
Not Connected Internally
Not Connected Internally
DSA2 Input
NC
NC
NC
NC
DSA2_IN
AMP1_OUT
GND
AMP1 Output and Bias Pin
RF/DC Ground Connection
RF/DC Ground Connection
GND
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 12 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Package Outline
Notes:
1. Dimensions in millimeters.
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 13 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Package Dimensions
Notes:
1. Dimensions in millimeters
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 14 of 15 -
www.qorvo.com
QPB0066
®
Digital Controlled Variable Gain Amplifier (5ꢀ–ꢀ500ꢀMHz)
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
Class C3 (1000V) ANSI/ESDA/JEDEC JS-001
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) Class 3 (1000V)
ANSI/ESDA/JEDEC JS-002
IPC/JEDEC J-STD-020
MSLꢀ–ꢀMoisture Sensitivity Level
Level 3
Solderability
Compatible with both lead-free (260ꢀ°C max. reflow temp.) and tin/lead (245ꢀ°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: NiPdAu
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2020 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet – Rev D May 27, 2020 | Subject to change without notice
FOR-000808
- 15 of 15 -
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明