QPB8858TR13 [QORVO]
75 34dB CATV Amplifier 47 â 1218MHz;型号: | QPB8858TR13 |
厂家: | Qorvo |
描述: | 75 34dB CATV Amplifier 47 â 1218MHz 有线电视 |
文件: | 总13页 (文件大小:1105K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Product Overview
The QPB8858 is a GaAs pHEMT/MESFET 75-ohm
push-pull RF amplifier IC featuring over 34dB of flat
gain and low noise. This IC is designed to support
DOCSIS 3.1 applications up to 1218MHz using a
single 24V supply. The QPB8858 offers low noise and
low distortion at high efficiency consuming only 7W in
a 5x7 QFN package. Its compact size and low ϴjc
enable integration that is ideally suited for hybrid
module applications.
40 pin 5x7 QFN Package
Functional Block Diagram
Key Features
■ High Gain: 34dB @ 1218MHz
■ Adjustable Bias
RF
RC Filter
+24V
VLIN IDD
CTRL
■ 47 - 1218 MHz BW
½ IDD
½ IDD
■ 47dBmv/ch flat
RF IN
75 Ω
RF OUT
75 Ω
■ Low Noise: 4dB
QPB8858
■ Excellent Composite Distortion
■ pHEMT / MESFET device technologies
■ Compact Size: 40P 5x7 QFN
■ Power Consumption (24V, 290mA - 7W)
½ IDD
½ IDD
EP
RC Filter
+24V
RF
Applications
• DOCSIS 3.1
• Broadband CATV hybrid modules
• Head End CMTS Equipment
• 75-ohm amplifiers
Ordering Information
Part No.
Description
QPB8858SB
QPB8858SR
QPB8858TR13
QPB8858EVB
Sample bag with 5 pieces
7" Reel with 100 pieces
13" Reel with 2500 pieces
47ꢀ–ꢀ1218MHz PCBA
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 1 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Absolute Maximum Ratings
Parameter
Supply Voltage (VDD
Rating
+30V (5min)
350mA
)
Supply Current (IDD
)
Maximum Input Level (single tone)
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
+70dBmV
-40 to +100°C
−65 to +150°C
+165°C
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical Specifications – 24V
Parameter
Condition (1)
VDD total current
1218MHz
Min
Typ
24
Max
Unit
V
Supply Voltage (VDD
)
Supply Current (IDD
Frequency Range
Gain2
)
290
mA
MHz
dB
47
1218
34
Gain Flatness
Max. deviation from line using least squares fit from 47
to 1218 MHz
±0.5
dB
Gain Slope
Gain(1218MHz) - Gain(50MHz)
1.0
-45
18
18
4
dB
dB
Reverse Isolation
Input Return Loss
dB
Output Return Loss
dB
Noise Figure
CSO
dB
80 NTSC + 111 QAM (-6dB offset), 47dBmV/ch out, 0dB
tilt
-70
-75
65
85
85
52
48
28
7.5
dBc
dBc
dB
CTB
CCN
OIP2
Low band: 225MHz, 275.5MHz, 15dBm/tone
High band: 1100MHz, 1150.5MHz, 15dBm/tone
Low band: 225MHz, 275.5MHz, 15dBm/tone
High band: 1100MHz, 1150.5MHz, 15dBm/tone
1218 MHz
dBm
dBm
dBm
dBm
dBm
˚C/W
OIP3
Output P1dB
Thermal Resistance
ΘJB (Junction to backside of QFN)
Notes:
1. Typical performance at these conditions: Temp = +25°C, VDD = +24V, 75Ω system, Full band unless otherwise noted
2. Gain (or Tilt) can be modified between stages by approximately -4dB (S21 = 30dB).
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 2 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Evaluation Board Schematic
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 3 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Evaluation Board Bill of Materials
Reference
Description
Designator
Manufacturer
PART #
U1
1.2GHz, 34dB Push-Pull MMIC
Qorvo
QPB8858
C1,C2,C3,C4,C12,C13,
C16,C17,C18,C19,C29,
C30
C9, C20, C24, C26
C7, C8
C6, C11
R18
CAP, 0.01uF, ±10%, 50V, X7R, 0402
CAP, 0.5pF, ±0.1pF, 50V, C0G, HIQ, 0402
CAP, 20pF, 2%, 50V, HI-Q, 0402
CAP, 470pF, 5%, 50V, C0G, 0402
RES, 10 OHM, 1%, 1/16W, 0402
RES, 5.60K ohm, 1%, 1/16W, 0402
RES, 0 OHM, 5%, 1/10W, 0402
RES, 15 OHM, 5%, 1/16W, 0402
RES, 200 OHM, 1%, 1/16W, 0402
RES, 10K, 1%, 1/16W, 0402
Murata Electronics
Murata Electronics
Murata Electronics
Murata Electronics
Panasonic
Vishay
Kamaya
Kamaya
Panasonic
GCM155R71H103KA55D
GJM1555C1HR50BB01D
GJM1555C1H200GB01D
GRM1555C1H471JA01D
ERJ-2RKF10R0X
CRCW04025K60FKED
RMC1/16SJPTH
RMC1/16S-150JTH
ERJ-2RKF2000X
R31
R19, R11, R12
R3, R4
R33, R34
R21
Panasonic
ERJ-2RKF1002X
R20
RES, 8.2K, +/-1%, 1/10W, 0402
RES, 47K, 1%, 1/16W, 0402
RES, 270 OHM, 5%, 1/16W, 0402
RES, 1.2K, 5%, 1/16W, 0402
RES, 0 OHM, 0603
RES, 1.8K, 5%, 1/16W, 0402
160 OHM,5%,1/16W,0402, LEAD FREE
IND, 470nH, ±5%, 310mA, 650mHZ, 0402
IND, 2.2nH, +/-0.3nH, M/L, 0402
IND, 1.5nH, +/-0.3nH, M/L, 0402
IND, 8.2nH, 5%, M/L, 0402
IND, 47nH, 5%, M/L, 0402
IND, 3.3nH, +/-0.1nH, M/L, 0402
IND, 2.2uH, 20%, 0.36A, 0.7mm, W/W, 0603
Panasonic
Yageo
Panasonic
Panasonic
Kamaya
Kamaya
KOA
Coilcraft
Murata Electronics
Murata Electronics
Murata Electronics
Murata Electronics
Murata Electronics
Taiyo Uden
ERJ-2RKF1801X
RC0402FR-0747KL
ERJ-2GEJ271
ERJ-2GEJ122
RMC1/16JPTP
RMC1/16S-182JTH
RK73B1ETTP161J
0402AF-471XJLW
LQG15HN2N2S02D
LQG15HN1N5S02D
LQG15HN8N2J02D
LQG15HN47NJ02D
LQG15HS3N3B02D
BRL1608T2R2M
R27, R28
R1, R2
R36, R37
R32, R39
R23
R7, R8
L1, L2
L9, L14
L8
L3, L4, L7
L10, L13
L5, L6
L16, L17
T1
XFMR, SMT, 75 OHM, CD542, 1:1 BALUN, TC1 Mini Circuits
TC1-33-75-7+
T2
TRANS, 75ohm, 30mA, 4.5-3000MHz
Mini Circuits
TRS2-1T-75-1+
R22, R25, R26, R29,
R30, R38, R40,
R35
Not Populated
U2,U3,U4,U5,C10,C21,
C22,C23,C25,C27,C28,
C31,C32,
R15,R16,R17,R24
Not Populated
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 4 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Evaluation Board Assembly Drawing
EVB PCB Material and Stack-up
1 oz Copper
FR4
1.4mil
1.4mil
Board Material: 0.030" FR4, εr=4.2
Plating:
1oz Copper
30.00mil
Board Dimension: 1.9685" x 1.9685"
1 oz Copper
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 5 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Evaluation Board Component Placement
Typical Application Schematic; 24V
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 6 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Performance Data 24V
Test Conditions:
1. Test conditions unless otherwise noted: VDD =+24ꢀV, Zo = 75Ω
2. OIP2: +15dBm per Tone.
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 7 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Performance Data 24V
Test Conditions:
1. Test conditions unless otherwise noted: VDD =+24ꢀV, Zo = 75Ω
2. OIP3: +15dBm per Tone.
3. CSO, CTB, CCN, CTN: 80 NTSC + 111 QAM (-6dB offset), 47dBmV/ch out, 0dB tilt
Data Sheet Rev. I, July 29, 2021
- 8 of 13 -
www.qorvo.com
Subject to change without notice | All rights reserved
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Performance Data 24V
MER versus Output Level
50
45
40
35
30
25
54MHz
162MHz
552MHz
852MHz
1218MHz
342MHz
750MHz
1002MHz
67
68
69
70
71
72
73
Composite Output Level (dBmV)
Test Conditions:
1. Test conditions unless otherwise noted: VDD =+24ꢀV, Zo = 75Ω
2. MER: 190 QAM256 Channels Flat Tilt, 57-1215MHz, ITU-T J.83, Annex B
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 9 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Pin Configuration and Description
32
31
30
29
28
27
26
25
24
23
22
21
33
34
35
36
37
38
39
40
20
19
18
17
16
15
14
13
VG2
N/C
VLIN
N/C
N/C
N/C
IN2A
N/C
IN2B
N/C
N/C
N/C
BIAS2
OUT1A
BIAS2
OUT1B
1
2
3
4
5
6
7
8
9
10
11
12
Pin 1 Marking
Exposed Backside Pad (EP) - GND
Top View
Pad No.
5
Label
IN1A
Description
RF input 1A
RF input 1B
RF output 1B
8
IN1B
13
OUT1B
BIAS2
IN2B
14, 39
17
2nd Stage virtual ground
RF input 2B
20
VLIN
Linearizer current set
VG3 adjust
21
VG3
23, 24
25, 28
29, 30
32
OUT2B
VG4
RF output 2B
VG4 set
OUT2A
ISET
RF output 2A
IDD set
33
VG2
VG2 adjust
36
IN2A
RF input 2A
40
OUT1A
RF output 1A
1, 2, 3, 4, 9, 10, 11, 12, 15, 16,
18, 19, 22, 26, 27, 31, 34, 35, 37,
38
N/C
No connect
6,7
N/C/GND
GND
No connect or ground
Ground. Use recommended via pattern to minimize inductance and thermal resistance. See
PCB Mounting Pattern for suggested footprint.
Backside Paddle
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 10 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Package Outline
Notes:
1. Dimensions in millimeters
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 11 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Package Marking
1. Dimension and tolerance formats conform to ASME Y14.4M-1994.
2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
3. Co-planarity applies to the exposed ground/thermal pad as well as the contact pins.
4. Package body length/width does not include plastic flash protrusion across mold parting line.
Recommended Mounting Pattern
•
•
•
•
Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Place mounting screws near the part to fasten a back-side heat sink.
Do not apply solder mask to the back side of the PC board in the heat sink contact region.
Ensure that the backside via region makes good physical contact with the heat sink.
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 12 of 13 -
www.qorvo.com
QPB8858
75Ω 34dB CATV Amplifier 47 – 1218MHz
®
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
1B (1000V) ANSI / ESDAꢁ/ꢁJEDEC JS-001
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) C3 (1000V) ANSI / ESDAꢁ/ꢁJEDEC JS-002
MSLꢀ–ꢀMoisture Sensitivity Level
Level 3
IPC / JEDEC J-STD-020
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: NiPdAu
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Tel: 1-844-890-8163
Web: www.qorvo.com
Email: customer.support@qorvo.com
Important Notice
The information contained in this Data Sheet and any associated documents (“Data Sheet Information”) is believed to be reliable;
however, Qorvo makes no warranties regarding the Data Sheet Information and assumes no responsibility or liability whatsoever for the
use of said information. All Data Sheet Information is subject to change without notice. Customers should obtain and verify the latest
relevant Data Sheet Information before placing orders for Qorvo® products. Data Sheet Information or the use thereof does not grant,
explicitly, implicitly or otherwise any rights or licenses to any third party with respect to patents or any other intellectual property whether
with regard to such Data Sheet Information itself or anything described by such information.
DATA SHEET INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting
the generality of the foregoing, Qorvo® products are not warranted or authorized for use as critical components in medical, life-saving,
or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or
death. Applications described in the Data Sheet Information are for illustrative purposes only. Customers are responsible for validating
that a particular product described in the Data Sheet Information is suitable for use in a particular application.
© 2021 Qorvo US, Inc. All rights reserved. This document is subject to copyright laws in various jurisdictions worldwide and may not be
reproduced or distributed, in whole or in part, without the express written consent of Qorvo US, Inc. | QORVO® is a registered
trademark of Qorvo US, Inc.
Data Sheet Rev. I, July 29, 2021
Subject to change without notice | All rights reserved
- 13 of 13 -
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明