QPL1815SB [QORVO]
75Ω CATV Amplifier 50 â 1800MHz;
| 型号： | QPL1815SB |
| 厂家： | 
Qorvo |
| 描述： | 75Ω CATV Amplifier 50 â 1800MHz 有线电视 |
| 文件： | 总10页 (文件大小：1460K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Product Overview_________________
The QPL1815 is a high performance broadband
DOCSIS 4.0 MMIC amplifier designed with GaAs
pHEMT technology optimized for low noise and high
linearity. A Darlington configuration is utilized for broad-
band performance with on-chip active bias circuit for
consistent bias current and repeatable performance. The
QPL1815 contains two amplifiers used in push-pull
configuration for excellent second and third order
linearity performance.
Package: SOIC-8
Functional Block Diagram___________
Key Features__________________
7V Single Supply
11dB Gain @ 1800MHz
OIP3: +40dBm
P1dB: +24dBm
Compact Size: 8-pin SOIC
50MHz to 1800MHz operation
supporting DOCSIS 4.0
pHEMT GaAs device technologies
Ordering Information________________
Applications___________________
Part Number
Description
Broadband CATV Amplifiers and Nodes
CATV Line Driver Amplifier
DOCSIS 4.0
QPL1815SB
QPL1815SR
QPL1815TR13
QPL1815EVB-01
Sample bag with 5 pieces
7" Reel with 100 pieces
13" Reel with 2500 pieces
Evaluation Board
75 Ohm Amplifiers
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 1 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Absolute Maximum Ratings____________________________________________
Rating
Unit
Parameter
Supply Voltage (VDD)
Supply Current (IDD)
Maximum RF Input Power
Maximum Junction Temperature
Storage Temperature
9
400
+10
Volts
mA
dBm
°C
°C
°C
+165
-65 to +150
-40 to +85
Operating Temperature
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical Specifications_______________________________________________
Condition (1)
Parameter
Min
6.5
150
50
Typ
7
215
Max
7.5
Unit
Volts
mA
MHz
dB
Supply Voltage (VDD)
Supply Current (IDD)
Frequency Range
Gain
1800
At 50MHz
10
10.5
11
1.0
20
18
18
3.5
44
42
42
70
65
62
40
40
35
24
32
At 1200MHz
At 1800MHz
dB
dB
dB
dB
dB
dB
dB
dB
Gain Slope
Reverse Isolation
Input Return Loss
Output Return Loss
Noise Figure
MER (2)
At +62dBmV Total Composite
Output power
At 1200MHz
At 111MHz
At 1302MHz
At 1698MHz
At 50MHz
At 1200MHz
At 1800MHz
At 50MHz
dB
dB
OIP2 Minus
OIP3
dBm
dBm
dBm
dBm
dBm
dBm
dBm
˚C/W
At 1200MHz
At 1800MHz
Output P1dB
Thermal Resistance
1.Typical performance at these conditions: Temp = +25°C, VDD = +7V, 75Ω system, Full band unless
otherwise noted
2. 54MHz to 1794MHz, 0dB tilt, 1 OFDM (54-246MHz) + 254 QAM (252-1794MHz) Channels. CCN Noise BW
(ANSI/SCTE 17): 5.36MHz for J.83/B. Tx Data: ITU-T, Annex B, QAM256, 5.36 MSymbols/s
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 2 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Typical Application Schematic 50 -1800MHz______________________________
Evaluation Board Schematic 50 -1800MHz________________________________
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 3 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Evaluation Board Bill of Material________________________________________
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 4 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Evaluation Board Layout 50 -1800MHz________________________________
Evaluation Board PCB Material and Stack-up
2 Layer FR4 Board, 2.25inches X 1.5inches
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 5 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Performance Data____________________________________________________
Input Return Loss
Gain
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
22
20
18
16
14
12
10
8
-40 Deg C
25 Deg C
85 Deg C
-40 Deg C
25 Deg C
85 Deg C
6
4
2
0
50
350
650
950
1250
1550
1850
50
350
650
950
1250
1550
1850
Frequency (MHz)
Frequency (MHz)
Output Return Loss
Reverse Isolation
0
-2
-4
-6
-8
0
-2
-4
-6
-8
-40 Deg C
25 Deg C
85 Deg C
-40 Deg C
25 Deg C
85 Deg C
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
50
250 450 650 850 1050 1250 1450 1650 1850
Frequency (MHz)
50
350
650
950
1250
1550
1850
Frequency (MHz)
OIP2 Minus Vs Frequency
OIP2 Plus Vs Frequency
100
90
80
70
60
50
40
100
90
80
70
60
50
40
+25 Deg C
-40 Deg C
+85 Dg C
+25 Deg C
-40 Deg C
+85 Dg C
Frequency (MHz)
Frequency (MHz)
Typical performance at these conditions: Temp = +25°C, VDD = +7V, 75Ω system, Full band unless otherwise noted
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 6 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Performance Data____________________________________________________
OIP3 Plus Vs Frequency
OIP3 Minus Vs Frequency
50
45
40
35
30
25
20
15
10
50
45
40
35
30
25
20
15
10
+25 Deg C
-40 Deg C
+85 Dg C
+25 Deg C
-40 Deg C
+85 Dg C
Frequency (MHz)
Frequency (MHz)
Noise Figure
P1dB Vs Frequency
30
25
20
15
10
5
7
6
5
4
3
2
1
0
+25 Deg C
-40 Deg C
+85 Dg C
+25 Deg C
-40 Deg C
+85 Deg C
0
50 250 450 650 850 1050 1250 1450 1650 1850
Frequency (MHz)
Frequency (MHz)
QPL1815 MER Vs TCP at 7V
48
46
44
42
40
38
36
255MHz
657MHz
1245MHz
1791MHz
55 56 57 58 59 60 61 62 63 64 65 66
Total Composite Power (dBmV)
1.Typical performance conditions: Temp = +25°C, VDD = +7V, 75Ω system, Full band unless otherwise noted.
2. 54MHz to 1794MHz, 0dB tilt, 1 OFDM (54-246MHz) + 254 QAM (252-1794MHz) Channels. CCN Noise BW (ANSI/SCTE
17): 5.36MHz for J.83/B. Tx Data: ITU-T, Annex B, QAM256, 5.36 MSymbols/s
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 7 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Package Marking
Pin Configuration and Description
Pin
Name
Description
1
RFIN1
RF input for plus side of amplifier
2
3
4
5
6
7
8
9
NC
NC
No Connect
No Connect
RFIN2
RFOUT1
NC
RF input for minus side of amplifier
RF output for plus side of amplifier
No Connect
NC
No Connect
RFOUT2
GND
RF output for minus side of amplifier
Exposed bottom of part, device ground
Ensure that the backside via region makes good physical contact with the heat sink.
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 8 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Package Outline
Notes:
1. All Dimensions are in inches.
2. Angles are in degrees.
Notes: All dimensions are in millimeters. Angles are in degrees.
Recommended Mounting Pattern
1. Use 1ꢀoz. copper minimum for top and bottom layer metal.
2. Vias are required under the backside paddle for proper RF/DC grounding and thermal dissipation.
3. Recommend a 0.35ꢀmm diameter bit for drilling via holes and a final plated thru diameter of 0.25ꢀmm.
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 9 of 10
Qorvo Confidential & Proprietary Information
QPL1815
75Ω CATV Amplifier 50 – 1800MHz
Classification | PRIVATE
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
1C
ANSI / ESDAꢁ/ꢁJEDEC JS-001
ANSI / ESDAꢁ/ꢁJEDEC JS-002
IPC / JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) C3
MSLꢀ–ꢀMoisture Sensitivity Level
MSL 3
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: NiPdAu
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Tel: 1-844-890-8163
Web: www.qorvo.com
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2019 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
_________________________________________________________________________________________________
© 2020 Qorvo US, Inc. | Rejimon.Varghese@qorvo.com
Data Sheet – Rev C | Oct 21 , 2020 | Subject to change without notice
- 10 of 10
Qorvo Confidential & Proprietary Information
相关型号：
©2020 ICPDF网 联系我们和版权申明