QPQ1270TR7 [QORVO]
Band 7 BAW Duplexer;
| 型号： | QPQ1270TR7 |
| 厂家： | 
Qorvo |
| 描述： | Band 7 BAW Duplexer |
| 文件： | 总15页 (文件大小：1005K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPQ1270
Band 7 BAW Duplexer
®
Product Overview
The QPQ1270 is a high-performance, Bulk Acoustic Wave
(BAW) duplexer designed for Band 7 uplink and downlink
applications.
The QPQ1270 provides low insertion loss and high
rejection, making it an ideal choice for small cells. This
duplexer is housed in a compact RoHs compliant 2.00ꢀmm
xꢀ2.50ꢀmmꢀxꢀ1.015ꢀmm surface mount package.
9 Pad 2.00 mm ꢁx ꢁ2.50 mm x 1.015 mm SMP
The QPQ1270 is part of Qorvo’s extensive portfolio of RF
BAW and SAW filters.
Key Features
• 70 MHz Bandwidth – Band 7 UL/DL
• Low Insertion Loss
• High Out of Band Attenuation
• Small 2.00ꢀmm xꢀ2.50ꢀmmꢀxꢀ1.015ꢀmm Surface Mount
Functional Block Diagram
Package (SMP)
GND
• Wide Temperature Range with Guaranteed
specifications: -ꢀ40 ºC to +ꢀ95 ºC
DL
GND
UL
1
2
3
8
GND
ANT
GND
7
6
5
• High Operating Temperature: +105 ºC
• High Power Rating: 30 dBm on DL or UL at +95 ºC
• No External Matching Required
• RoHS Compliant, Pb-Free
Pb
9
4
GND
Applications
• Base Stations Infrastructure
• Small Cells
• Repeaters
GND
Top View
• LTE Dongles
• General Purpose Wireless
Pin Configuration
Pin No.
Label
Function
1
DL
Downlink Input
Ground
2, 4, 5, 7, 8, 9 GND
Ordering Information
3
6
UL
ANT
Uplink Output
Antenna Port
Part No.
Description
QPQ1270TR7
7” Taped Reel with 2500 pieces
QPQ1270EVB
Assembled Evaluation Board
Datasheet Rev E, October 21, 2019 | Subject to change without notice
1 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Absolute Maximum Ratings (1)
Minimum Lifetime Ratings
Conditions
Rating
Parameter
Rating
Storage Temperatureꢀ
Operating Temperature (2)
Notes:
−40 to +125°C
−40 to +105ꢀ°C
+30 dBm at Pin 1 (DL to ANT), 2620-2690 MHz,
FD-LTE, 5ꢀMHz, 16 QAM, 25 RB, PAR 8ꢀdB, +95°C
>87,600 hours
+30 dBm at Pin 6 (ANT to UL), 2500-2570 MHz,
FD-LTE, 5ꢀMHz, 16 QAM, 25 RB, PAR 8ꢀdB, +95°C
>87,600 hours
>87,600 hours
1. Operation of this device outside the parameter ranges given may
cause permanent damage.
2. Device will function but it is not guaranteed to meet electrical
specifications
+30 dBm at Pin 3 (UL to ANT), 2500-2570 MHz,
FD-LTE, 5ꢀMHz, 16 QAM, 25 RB, PAR 8ꢀdB, +95°C
Electrical Specifications – Uplinkꢀ(3)
Test conditions unless otherwise noted: Tempꢀ= −20ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min
Typꢀ(7)
Max
Units
Center Frequency
–
–
–
–
–
2535
2.4
2.4
1.6
2.1
–
MHz
2500ꢀ–ꢀ2505ꢀMHz (-20ꢀ°C to +35°C)
2500ꢀ–ꢀ2505ꢀMHz (+35ꢀ°C to +85°C)
2505ꢀ–ꢀ2565ꢀMHz
3.6
3.3
2.0
3.2
Average Insertion Lossꢀ(4)
dB
2565ꢀ–ꢀ2570ꢀMHz
Amplitude Variationꢀ(5)
Group Delay Variationꢀ(6)
Phase Rippleꢀ(6)
2500ꢀ–ꢀ2570ꢀMHz
–
–
1.3
4.3
3.0
20
dB
2500ꢀ–ꢀ2570ꢀMHz (over any 5 MHz)
ns p-p
º p-p
2500ꢀ–ꢀ2570ꢀMHz (over any 5 MHz)
Antenna Port (2500ꢀ–ꢀ2570 MHz)
Uplink Port (2500ꢀ–ꢀ2570 MHz)
100ꢀ–ꢀ700 MHz
700ꢀ–ꢀ960 MHz
960ꢀ–ꢀ1805 MHz
1805ꢀ–ꢀ1880 MHz
1880ꢀ–ꢀ2110 MHz
2110ꢀ–ꢀ2170 MHz
2170 –ꢀ2300 MHz
2300ꢀ–ꢀ2400 MHz
2402ꢀ–ꢀ2474 MHz
2474ꢀ–ꢀ2480 MHz
2590ꢀ–ꢀ2620 MHz
2620 –ꢀ2690 MHz
2690 –ꢀ3400 MHz
3400 –ꢀ3800 MHz
3800 –ꢀ5150 MHz
–
1.1
11.2
11.6
58
53
48
51
52
54
52
51
55
38
18
56
42
42
45
8
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
8.3
8.3
30
40
30
43
25
45
25
45
40
7
10
54
25
30
15
25
Return Loss
dB
Attenuationꢀ(8)
dB
5150 –ꢀ6000 MHz
54
WiFi Attenuationꢀ(9)
Source/Load Impedanceꢀ(10)
Notes:
2401ꢀ–2473 MHz (WiFi Channel 1 to 11)
48
58
50
–
–
dB
Single-ended
–
3. All specifications are based on the Qorvo schematic for the main reference design.
4. Average Insertion Loss is calculated by averaging |S21| in dB for each measured point within defined frequency range.
5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency range.
6. This is defined as the worst difference between a peak and adjacent valley within defined frequency range.
7. Typical values are based on average measurements of 12 devices at room temperature.
8. Relative to zero dB.
9. Data is an integrated channel measurement from 2412 MHz to 2462 MHz with a 22 MHz channel width and 5 MHz step size (802.11b).
10. This is the optimum impedance in order to achieve the performance shown.
Datasheet Rev E, October 21, 2019 | Subject to change without notice
2 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Electrical Specifications – Downlinkꢀ(1)
Test conditions unless otherwise noted: Tempꢀ= −20ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min
Typꢀ(5)
Max
Units
Center Frequency
–
2655
–
MHz
2620ꢀ–ꢀ2625ꢀMHz
2625ꢀ–ꢀ2685ꢀMHz
2685ꢀ–ꢀ2690ꢀMHz
2620ꢀ–ꢀ2690ꢀMHz
–
–
–
–
2.3
1.8
2.1
1.0
3.0
2.2
3.0
1.8
Average Insertion Lossꢀ(2)
dB
Amplitude Variationꢀ(3)
Group Delay Variationꢀ(4)
Phase Rippleꢀ(4)
dB
2620ꢀ–ꢀ2690ꢀMHz (over any 5 MHz)
2620ꢀ–ꢀ2690ꢀMHz (over any 5 MHz)
–
–
4.1
1.1
20
ns p-p
8
º p-p
Antenna Port (2620ꢀ–ꢀ2690 MHz)
Downlink Port (2620ꢀ–ꢀ2690 MHz)
100 –ꢀ960 MHz
960ꢀ–ꢀ1710 MHz
1710ꢀ–ꢀ1920 MHz
9.1
8.3
35
30
45
46
30
57
57
55
25
5
12.2
10.8
63
53
53
52
53
60
60
60
51
30
25
58
58
52
45
62
62
67
–
Return Loss
dB
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1920ꢀ–ꢀ1980 MHz
1980 –ꢀ2300 MHz
2300ꢀ–ꢀ2400 MHz
2400 –ꢀ2484 MHz
2485 –ꢀ2570 MHz (5MHz averaging) (8)
2570ꢀ–ꢀ2585 MHz
Attenuationꢀ(6)
dB
2585ꢀ–ꢀ2595 MHz
2715 –ꢀ2725 MHz
2725 –ꢀ2800 MHz
2800 –ꢀ3400 MHz
3400 –ꢀ3800 MHz
3800 –ꢀ5150 MHz
5150 –ꢀ5400 MHz
5400 –ꢀ6000 MHz
5
25
30
30
20
40
30
–
2nd Harmonic at ANT
IMD3L at Uplink
Pinꢀ=ꢀ+27 dBm into DL (2620-2690)
dBc
dBc
dBc
2 Tone of Pinꢀ=ꢀ+24 dBm into DL port
2 Tone of Pinꢀ=ꢀ+24 dBm into DL port
Single-ended
–
–
–
101
157
50
–
–
–
IMD5L at Uplink
Source/Load Impedanceꢀ(7)
Electrical Specifications – Isolation (1)
Test conditions unless otherwise specified: Tempꢀ= −20ꢀ°C to +85ꢀ°C
Parameter
Isolation (8)
Notes:
Conditionsꢀ(1, 2)
2500 – 2560 MHz
2560 – 2570 MHz
2620 – 2690 MHz
Min
57
Typꢀ(5)
61
Max
Unit
–
–
–
54
59
dB
57
59
1. All specifications are based on the Qorvo schematic for the main reference design.
2. Average Insertion Loss is calculated by averaging |S21| in dB for each measured point within defined frequency range.
3. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency range.
4. This is defined as the worst difference between a peak and adjacent valley within defined frequency range.
5. Typical values are based on average measurements of 12 devices at room temperature.
6. Relative to zero dB.
7. This is the optimum impedance in order to achieve the performance shown.
8. Data is the integrated loss value with respect to zero dB of the linear s-parameter over 5MHz range.
Datasheet Rev E, October 21, 2019 | Subject to change without notice
3 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Electrical Specifications – Uplinkꢀ(1)
Test conditions unless otherwise noted: Tempꢀ= −40ꢀ°C to +95ꢀ°C
Parameter
Conditions
Min
Typꢀ(5)
Max
Units
Center Frequency
–
2535
–
MHz
2500ꢀ–ꢀ2505ꢀMHz (-40ꢀ°C to +35°C)
2500ꢀ–ꢀ2505ꢀMHz (+35ꢀ°C to +95°C)
2505ꢀ–ꢀ2565ꢀMHz
–
–
–
–
2.4
2.4
1.6
2.1
3.8
3.3
2.2
3.4
Average Insertion Lossꢀ(2)
dB
2565ꢀ–ꢀ2570ꢀMHz
Amplitude Variationꢀ(3)
Group Delay Variationꢀ(4)
Phase Rippleꢀ(4)
2500ꢀ–ꢀ2570ꢀMHz
–
–
–
1.3
4.3
1.1
3.2
dB
2500ꢀ–ꢀ2570ꢀMHz (over any 5 MHz)
2500ꢀ–ꢀ2570ꢀMHz (over any 5 MHz)
22
9
ns p-p
º p-p
Antenna Port (2500ꢀ–ꢀ2570 MHz)
Uplink Port (2500ꢀ–ꢀ2570 MHz)
100ꢀ–ꢀ700 MHz
700ꢀ–ꢀ960 MHz
960ꢀ–ꢀ1805 MHz
8.3
8.3
30
40
30
43
25
45
25
45
38
5
11.2
11.6
58
53
48
51
52
54
51
51
55
38
18
56
42
42
45
54
–
Return Loss
dB
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1805ꢀ–ꢀ1880 MHz
1880ꢀ–ꢀ2110 MHz
2110ꢀ–ꢀ2170 MHz
2170 –ꢀ2300 MHz
2300ꢀ–ꢀ2400 MHz
2402ꢀ–ꢀ2474 MHz
2474ꢀ–ꢀ2480 MHz
2590ꢀ–ꢀ2620 MHz
2620 –ꢀ2690 MHz
2690 –ꢀ3400 MHz
3400 –ꢀ3800 MHz
3800 –ꢀ5150 MHz
5150 –ꢀ6000 MHz
Attenuationꢀ(6)
dB
9
53
25
30
15
25
WiFi Attenuationꢀ(7)
Source/Load Impedanceꢀ(8)
2401ꢀ–2473 MHz (WiFi Channel 1 to 11)
47
58
50
–
–
dB
Single-ended
–
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design.
2. Average Insertion Loss is calculated by averaging |S21| in dB for each measured point within defined frequency range.
3. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency range.
4. This is defined as the worst difference between a peak and adjacent valley within defined frequency range.
5. Typical values are based on average measurements of 12 devices at room temperature.
6. Relative to zero dB.
7. Data is an integrated channel measurement from 2412 MHz to 2462 MHz with a 22 MHz channel width and 5 MHz step size (802.11b).
8. This is the optimum impedance in order to achieve the performance shown.
Datasheet Rev E, October 21, 2019 | Subject to change without notice
4 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Electrical Specifications – Downlinkꢀ(1)
Test conditions unless otherwise noted: Tempꢀ= −40ꢀ°C to +95ꢀ°C
Parameter
Conditions
Min
Typꢀ(5)
Max
Units
Center Frequency
–
2655
–
MHz
2620ꢀ–ꢀ2625ꢀMHz
2620ꢀ–ꢀ2665ꢀMHz
2665ꢀ–ꢀ2690ꢀMHz
–
–
–
2.3
1.8
2.1
3.0
2.3
3.2
Average Insertion Lossꢀ(2)
dB
Amplitude Variationꢀ(3)
Group Delay Variationꢀ(4)
Phase Rippleꢀ(4)
2620ꢀ–ꢀ2690ꢀMHz
–
–
0.8
4.1
2.0
dB
2620ꢀ–ꢀ2690ꢀMHz (over any 5 MHz)
21
9
ns p-p
º p-p
2620ꢀ–ꢀ2690ꢀMHz (over any 5 MHz)
Antenna Port (2620ꢀ–ꢀ2690 MHz)
Uplink Port (2620ꢀ–ꢀ2690 MHz)
100 –ꢀ960 MHz
960 –ꢀ1710 MHz
1710ꢀ–ꢀ1920 MHz
1920ꢀ–ꢀ1980 MHz
1980 –ꢀ2300 MHz
2300ꢀ–ꢀ2400 MHz
2400 –ꢀ2484 MHz
2485ꢀ–ꢀ2570 MHz (5MHz averaging) (8)
2570ꢀ–ꢀ2585 MHz
2585ꢀ–ꢀ2595 MHz
2715 –ꢀ2725 MHz
2725 –ꢀ2800 MHz
2800 –ꢀ3400 MHz
3400 –ꢀ3800 MHz
3800 –ꢀ5150 MHz
–
9.0
8.3
35
30
45
46
30
56
56
54
24
4
1.1
12.2
12.1
63
53
53
52
53
60
60
60
51
30
25
58
58
52
45
62
62
67
–
Return Loss
dB
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Attenuationꢀ(6)
dB
4
24
30
30
20
40
30
–
5150 –ꢀ5400 MHz
5400 –ꢀ6000 MHz
Pinꢀ=ꢀ+27 dBm into DL (2620-2690)
2nd Harmonic at ANT
IMD3L at Uplink
dBc
dBc
dBc
2 Tone of Pinꢀ=ꢀ+23 dBm into DL port
2 Tone of Pinꢀ=ꢀ+23 dBm into DL port
Single-ended
–
–
–
101
157
50
–
–
–
IMD5L at Uplink
Source/Load Impedanceꢀ(7)
Electrical Specifications – Isolation (1)
Test conditions unless otherwise specified: Tempꢀ= −40ꢀ°C to +95ꢀ°C
Parameter
Isolation (8)
Notes:
Conditionsꢀ(1, 2)
2500 – 2560 MHz
2560 – 2570 MHz
2620 – 2690 MHz
Min
56
Typꢀ(5)
61
Max
Unit
–
–
–
53
59
dB
56
59
1. All specifications are based on the Qorvo schematic for the main reference design.
2. Average Insertion Loss is calculated by averaging |S21| in dB for each measured point within defined frequency range.
3. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency range.
4. This is defined as the worst difference between a peak and adjacent valley within defined frequency range.
5. Typical values are based on average measurements of 12 devices at room temperature.
6. Relative to zero dB.
7. This is the optimum impedance in order to achieve the performance shown.
8. Data is the integrated loss value with respect to zero dB of the linear s-parameter over 5MHz range.
Datasheet Rev E, October 21, 2019 | Subject to change without notice
5 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Evaluation Board and Schematic – QPQ1270EVB
Bill of Material – QPQ1270EVB
Ref. Des.
U1
SMA
Value
Description
Duplexer, Band7, BAW
Connector, SMA
Manufacturer Part Number
–
–
–
Qorvo
Radiall
Qorvo
QPQ1270
9602-1111-018
283666
PCB
Printed Circuit Board, Evaluation
Datasheet Rev E, October 21, 2019 | Subject to change without notice
6 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
De-embedded Performance Plots Uplink
Test conditions unless otherwise noted: Temp= +25°C
Uplink Frequency Response
Uplink Passband Response
0
-20
-40
-60
-80
-1
-2
-3
-4
-5
-6
d
B
d
B
2285
2440
2595
2750
2905
2465
2500
2535
2570
2605
Frequency (MHz)
Frequency (MHz)
Uplink Wideband Response
Uplink Return Loss
0
-20
-40
-60
-80
0
-10
d
B
d
B
-20
-30
2465
100
1600
3100
4600
6100
2500
2535
2570
2605
Frequency (MHz)
Frequency (MHz)
Uplink Path - Ant Port Impedance
Uplink Port Impedance
1
1
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
0
-1
-0.5
0
0.5
1
-1
-0.5
0.5
1
-0.2
-0.4
-0.6
-0.8
-1
-0.2
-0.4
-0.6
-0.8
-1
Datasheet Rev E, October 21, 2019 | Subject to change without notice
7 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
De-embedded Performance Plots Downlink
Test conditions unless otherwise noted: Temp= +25°C
Downlink Frequency Response
Downlink Passband Response
0
-20
-40
-60
-80
-1
-2
-3
-4
-5
-6
d
B
d
B
2285
2440
2595
2750
2905
2585
2620
2655
2690
2725
Frequency (MHz)
Frequency (MHz)
Downlink Wideband Response
Downlink Return Loss
0
-20
-40
-60
-80
0
-10
-20
-30
d
B
d
B
100
1600
3100
4600
6100
2585
2620
2655
2690
2725
Frequency (MHz)
Frequency (MHz)
Downlink Port Impedance
Downlink Path - Ant Port Impedance
1
1
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
-1
-0.5
0
0.5
1
-1
-0.5
0
0.5
1
-0.2
-0.4
-0.6
-0.8
-1
-0.2
-0.4
-0.6
-0.8
-1
Datasheet Rev E, October 21, 2019 | Subject to change without notice
8 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
De-embedded Performance Plots Isolation
Test conditions unless otherwise noted: Temp= +25°C
Isolation
0
-20
-40
d
B
-60
-80
-100
2285
2440
2595
2750
2905
Frequency (MHz)
Antenna Return Loss
0
-10
-20
-30
d
B
2465
2530
2595
2660
2725
Frequency (MHz)
Datasheet Rev E, October 21, 2019 | Subject to change without notice
9 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Package Dimensions
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
Datasheet Rev E, October 21, 2019 | Subject to change without notice
10 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Package Marking
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be necessary to suit
end user assembly materials and processes.
Datasheet Rev E, October 21, 2019 | Subject to change without notice
11 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Tape and Reel Information – Carrier and Cover Tape Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2500 pieces on a 7” reel.
Feature
Measure
Length
Symbol
Size (in)
0.094
Size (mm)
2.40
A0
B0
K0
P1
P2
F
Width
0.114
2.90
Cavity
Depth
0.043
1.10
Pitch
0.157
4.00
Cavity to Perforation - Length Direction
Cavity to Perforation - Width Direction
0.079
2.00
Centerline
Distance
0.138
3.50
Cover Tape
Carrier Tape
Width
Width
C
0.213
0.315
5.40
8.00
W
Datasheet Rev E, October 21, 2019 | Subject to change without notice
12 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Tape and Reel Information – Reel Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2500 pieces on a 7” reel.
Feature
Measure
Symbol
Size (in)
6.969
Size (mm)
177.0
14.2
Diameter
A
W2
W1
N
Flange
Thickness
0.559
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
Key Slit Diameter
0.346
8.8
2.283
58.0
C
0.512
13.0
Hub
B
0.079
2.0
D
0.787
20.0
Datasheet Rev E, October 21, 2019 | Subject to change without notice
13 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Assembly Notes
Compatible with both lead-free (260°C peak reflow temperature) and tin/lead (245°C peak reflow temperature) soldering
processes.
Contact Plating: NiAu (Thickness: Ni 5.0±3.0 μm; Au 0.1 μm min.)
Recommended Soldering Temperature Profile
Datasheet Rev E, October 21, 2019 | Subject to change without notice
14 of 15
www.qorvo.com
QPQ1270
Band 7 BAW Duplexer
®
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
Class 1B
ESDAꢁ/ꢁJEDEC JS-001-2012
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) Class C2b ESDAꢁ/ꢁJEDEC JS-002-2014
MSLꢀ–ꢀMoisture Sensitivity Level
Level 3
IPC/JEDEC J-STD-020
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
Pb
• PFOS Free
• SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2019 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Datasheet Rev E, October 21, 2019 | Subject to change without notice
15 of 15
www.qorvo.com
相关型号：
©2020 ICPDF网 联系我们和版权申明