QPQ1297TR7 [QORVO]
FDD Band 3 BAW Duplexer;型号: | QPQ1297TR7 |
厂家: | Qorvo |
描述: | FDD Band 3 BAW Duplexer |
文件: | 总15页 (文件大小:809K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPQ1297
FDD Band 3 BAW Duplexer
®
Product Overview
The QPQ1297 is a high-performance Bulk Acoustic Wave
(BAW) Duplexer designed for Bandꢁ3 uplinkꢀ/ꢀdownlink
applications.
The QPQ1297 provides low insertion loss and high rejection
making it an ideal choice for Small Cells. This duplexer is
housed in a compact, RoHs compliant 2.00ꢀmmꢀxꢀ2.50ꢀmm xꢀ
0.93 mm surface mount pacakge (SMP).
9 Pad 2.00ꢀmmꢁxꢁ2.50ꢀmmꢁxꢁ0.93ꢁmm SMP
The QPQ1297 is part of Qorvo’s extensive portfolio of RF
BAW and SAW filters.
Key Features
• 75ꢁMHz Bandwidth – Band 3 Up Link
• 75 MHz Bandwidth – Band 3 Down Link
• High Attenuation
Functional Block Diagram
• Low Loss
GND
• No External Matching Required
• Single Input, Single Output Operation
• Small Size: 2.00ꢀmmꢁxꢁ2.50ꢀmmꢁxꢁ0.93ꢁmm
• Surface Mount Package (SMP)
• RoHS Compliant, Pb-Free
B3 DL
GND
1
2
3
8
GND
ANT
GND
7
6
5
9
4
GND
Applications
B3 UL
• Band 3
GND
• Base Station Infrastructure
• Small Cells
Top View
• Repeaters
Pin Configuration
• Routers
• LTE Dongles
Pin No.
Label
B3 DL
GND
Function
• General Purpose Wireless
1
Downlink port
Ground connections
Uplink port
2, 4, 5, 7, 8, 9
3
6
B3 UL
ANT
Antenna port
Ordering Information
Part No.
Description
QPQ1297TR7
QPQ1297EVB
2,500 pieces on a 7” reel (standard)
Evaluation Board
Datasheet, December 4, 2018 | Subject to change without notice
1 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Absolute Maximum Ratings
Life Test
Parameter
Rating
Conditions
Rating
Storage Temperature
Operation Temperature
−40 to +125°C
−40 to +95ꢀ°C
+30 dBm DL (1), +85°C (3)
+23 dBm UL (2), +85°C (3)
+30 dBm DL (1), +95°C (3)
+23 dBm UL (2), +95°C (3)
> 293,000 hours
> 293,000 hours
> 102,000 hours
> 102,000 hours
Notes:
1. Power injected into Pin 1 downlink port
2. Power injected into Pin 6 antenna port
3. FD-LTE, 5MHz 16QAM, PAR =8dB
Electrical Specifications (4) – Band 3 Uplink
Test conditions unless otherwise specified. Temperature Range: −40 to +95 °C
Parameterꢀ(5)
Passband
Conditions
Min
Typꢀ(6)
–
Maxꢀ
1785
4.1
Units
1710
MHz
dB
Max Insertion Loss
1710ꢀ–ꢀ1785 MHz
–
–
–
–
–
–
–
–
2.3–
1.8
1710ꢀ–ꢀ1715 MHz
2.6
Average Insertion Loss
1715ꢀ–ꢀ1780 MHz (Over any 5 MHz bandwidth)
1780ꢀ–ꢀ1785 MHz
1.6
2.4
2.1
3.2
dB
dB
ns
ns
Amplitude Ripple (7)
Group Delay Variation
Input / Output VSWR
1710ꢀ–ꢀ1785 MHz
0.7
2.2
1710ꢀ–ꢀ1785 MHz
26.9
11.9
1.7:1
48.0
25.0
2.0:1
1710ꢀ–ꢀ1785 MHz (Over any 5 MHz bandwidth)
1710ꢀ–ꢀ1785 MHz
10ꢀ–ꢀ700 MHz
700ꢀ–ꢀ1000 MHz
1000ꢀ–ꢀ1400 MHz
1400ꢀ–ꢀ1600 MHz
1600ꢀ–ꢀ1685 MHz (Over any 5 MHz bandwidth)
1685ꢀ–ꢀ1690 MHz (Over any 5 MHz bandwidth)
1805ꢀ–ꢀ1850 MHz (Over any 5 MHz bandwidth)
1850ꢀ–ꢀ1855 MHz (Over 5 MHz bandwidth)
1855ꢀ–ꢀ1875 MHz (Over any 5 MHz bandwidth)
1875ꢀ–ꢀ1880 MHz (Over 5 MHz bandwidth)
1880ꢀ–1920 MHz
1920ꢀ–1980 MHz
1980ꢀ– 2110 MHz
2110ꢀ–ꢀ2170 MHz
2170ꢀ–ꢀ2690 MHz
2690ꢀ–ꢀ3400 MHz
3400ꢀ–ꢀ3800 MHz
3800ꢀ–ꢀ5150 MHz
5150ꢀ–ꢀ6000 MHz
30
38
20
35
19
10
44
48
47
47
38
30
38
40
32
13
6
38
39
40
40
28
24
56
53
50
50
48
45
46
50
39
19
9
–
ꢀ–ꢀ
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Attenuation (8)
dB
2
7
4
9
EVM
1712.5ꢀ–ꢀ1782.5 MHz
–
–
3
%
Source/Load Impedance (9) Single-ended
50
–
Notes:
4. All specifications are based on the Qorvo schematic for the main reference design.
5. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
6. Typical values are based on average measurements of 12 devices at room temperature.
7. This is defined as the worst difference between a peak and adjacent valley within defined frequency points.
8. Relative to zero dB.
9. This is the optimum impedance in order to achieve the performance shown.
Datasheet, December 4, 2018 | Subject to change without notice
2 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Electrical Specifications (1) – Band 3 Uplink
Test conditions unless otherwise specified. Temperature Range: −40 to +85 °C
Parameterꢀ(2)
Passband
Conditions
Min
Typꢀ(3)
–
Maxꢀ
1785
3.8
Units
MHz
dB
1710
Max Insertion Loss
1710ꢀ–ꢀ1785 MHz
–
–
–
–
–
–
–
–
2.3
1710ꢀ–ꢀ1715 MHz
1.8
2.6
Average Insertion Loss
1715ꢀ–ꢀ1780 MHz (Over any 5 MHz bandwidth)
1780ꢀ–ꢀ1785 MHz
1.6
2.4
2.1
3.0
dB
dB
ns
ns
Amplitude Ripple (4)
Group Delay Variation
Input / Output VSWR
1710ꢀ–ꢀ1785 MHz
0.7
2.2
1710ꢀ–ꢀ1785 MHz
26.9
10.5
1.7:1
45.0
25.0
2.0:1
1710ꢀ–ꢀ1785 MHz (Over any 5 MHz bandwidth)
1710ꢀ–ꢀ1785 MHz
10ꢀ–ꢀ700 MHz
700ꢀ–ꢀ1000 MHz
1000ꢀ–ꢀ1400 MHz
1400ꢀ–ꢀ1600 MHz
1600ꢀ–ꢀ1685 MHz (Over any 5 MHz bandwidth)
1685ꢀ–ꢀ1690 MHz (Over 5 MHz bandwidth)
1805ꢀ–ꢀ1850 MHz (Over any 5 MHz bandwidth)
1850ꢀ–ꢀ1855 MHz (Over 5 MHz bandwidth)
1855ꢀ–ꢀ1875 MHz (Over any 5 MHz bandwidth)
1875ꢀ–ꢀ1880 MHz (Over 5 MHz bandwidth)
1880ꢀ–1920 MHz
1920ꢀ–1980 MHz
1980ꢀ– 2110 MHz
2110ꢀ–ꢀ2170 MHz
2170ꢀ–ꢀ2690 MHz
2690ꢀ–ꢀ3400 MHz
3400ꢀ–ꢀ3800 MHz
3800ꢀ–ꢀ5150 MHz
5150ꢀ–ꢀ6000 MHz
30
38
20
35
23
12
50
48
47
47
38
30
38
40
34
13
6.5
3
38
39
40
40
28
24
56
53
50
50
48
45
46
50
39
19
9
–
ꢀ–ꢀ
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Attenuation (5)
dB
4
9
7
EVM
1712.5ꢀ–ꢀ1782.5 MHz
–
–
3
%
Source/Load Impedance (6) Single-ended
50
–
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
3. Typical values are based on average measurements of 12 devices at room temperature.
4. This is defined as the worst difference between a peak and adjacent valley within defined frequency points.
5. Relative to zero dB.
6. This is the optimum impedance in order to achieve the performance shown.
Datasheet, December 4, 2018 | Subject to change without notice
3 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Electrical Specifications (1) – Band 3 Downlink
Test conditions unless otherwise specified. Temperature Range: −40 to +95 °C
Parameterꢀ(2)
Conditions
Min
Typꢀ(3)
–
Maxꢀ
1880
4.0
Units
MHz
dB
Passband
1805
1805ꢀ–ꢀ1880 MHz (-40ꢀtoꢀ+95ꢀ°C)
1812.5 –ꢀ1872.5 MHz (-40ꢀtoꢀ+95ꢀ°C)
1805ꢀ–ꢀ1810 MHz (-40ꢀtoꢀ+95ꢀ°C)
–
–
–
–
–
–
–
–
–
2.8
2.2
Max Insertion Loss
2.7
2.3
2.8
dB
Average Insertion Loss 1810ꢀ–ꢀ1875 MHz (-40ꢀtoꢀ+95ꢀ°C) (Over any 5 MHz bandwidth)
1875ꢀ–ꢀ1880 MHz (-40ꢀtoꢀ+95ꢀ°C)
Amplitude Ripple (4)
Group Delay Variation
Input / Output VSWR
2.2
2.7
2.4
3.4
1805ꢀ–ꢀ1880 MHz (-40ꢀtoꢀ+95ꢀ°C)
0.7
2.2
dB
ns
ns
1805ꢀ–ꢀ1880 MHz (-40ꢀtoꢀ+95ꢀ°C)
23.2
11.7
2.4:1
40.0
25.0
2.6:1
1805ꢀ–ꢀ1880 MHz (-40ꢀtoꢀ+95ꢀ°C) (Over any 5 MHz bandwidth)
1805ꢀ–ꢀ1880 MHz
10ꢀ–ꢀ700 MHz
880ꢀ–ꢀ915 MHz
700ꢀ–ꢀ1000 MHz
1000ꢀ–ꢀ1400 MHz
1400ꢀ–ꢀ1600 MHz
1600ꢀ–ꢀ1710 MHz
1710ꢀ–ꢀ1770 MHz (Over any 5 MHz bandwidth)
1770ꢀ– 1775 MHz (Over 5 MHz bandwidth)
1775ꢀ– 1785 MHz (Over any 5 MHz bandwidth)
1920ꢀ– 1925 MHz (Over 5 MHz bandwidth)
1925ꢀ– 1930 MHz (Over 5 MHz bandwidth)
1930ꢀ– 1965 MHz (Over any 5 MHz bandwidth)
1965ꢀ– 1980 MHz (Over any 5 MHz bandwidth)
1980ꢀ– 2300 MHz
2300ꢀ–ꢀ2400 MHz
2400ꢀ–ꢀ2690 MHz
2690ꢀ–ꢀ3400 MHz
3400ꢀ–ꢀ3800 MHz
20
28
26
23
35
20
52
50
53
53
54
55
48
30
49
45
25
45
20
28
44
30
28
26
38
52
57
63
59
56
59
57
55
55
55
59
46
53
44
31
–
ꢀ–ꢀ
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Attenuation (5)
dB
3800ꢀ–ꢀ5150 MHz
5150ꢀ–ꢀ6000 MHz
EVM
1807.5ꢀ–ꢀ1877.5 MHz (-40ꢀtoꢀ+95ꢀ°C)
–
3
–
%
Source/Load Impedance
Single-ended
–
50
–
(6)
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
3. Typical values are based on average measurements of 12 devices at room temperature.
4. This is defined as the worst difference between a peak and adjacent valley within defined frequency points.
5. Relative to zero dB.
6. This is the optimum impedance in order to achieve the performance shown.
Datasheet, December 4, 2018 | Subject to change without notice
4 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Electrical Specifications (1) – Band 3 Downlink
Test conditions unless otherwise specified. Temperature Range: −40 to +85 °C
Parameterꢀ(2)
Conditions
Min
Typꢀ(3)
–
Maxꢀ
1880
4.0
Units
MHz
dB
Passband
1805
1805ꢀ–ꢀ1880 MHz
–
–
–
–
–
–
–
–
–
2.8
2.2
Max Insertion Loss
1812.5 –ꢀ1872.5 MHz
2.7
1805ꢀ–ꢀ1810 MHz
2.3
2.8
dB
Average Insertion Loss
1810ꢀ–ꢀ1875 MHz (Over any 5 MHz bandwidth)
1875ꢀ–ꢀ1880 MHz
2.2
2.5
2.4
3.1
Amplitude Ripple (4)
Group Delay Variation
Input / Output VSWR
1805ꢀ–ꢀ1880 MHz
0.7
2.2
dB
ns
ns
1805ꢀ–ꢀ1880 MHz
23.2
11.7
2.4:1
40.0
25.0
2.5:1
1805ꢀ–ꢀ1880 MHz (Over any 5 MHz bandwidth)
1805ꢀ–ꢀ1880 MHz
10ꢀ–ꢀ700 MHz
880ꢀ–ꢀ915 MHz
700ꢀ–ꢀ1000 MHz
1000ꢀ–ꢀ1400 MHz
1400ꢀ–ꢀ1600 MHz
1600ꢀ–ꢀ1710 MHz
1710ꢀ–ꢀ1770 MHz (Over any 5 MHz bandwidth)
1770ꢀ– 1775 MHz (Over 5 MHz bandwidth)
1775ꢀ– 1785 MHz (Over any 5 MHz bandwidth)
1920ꢀ– 1925 MHz (Over 5 MHz bandwidth)
1925ꢀ– 1930 MHz (Over 5 MHz bandwidth)
1930ꢀ– 1965 MHz (Over any 5 MHz bandwidth)
1965ꢀ– 1980 MHz (Over any 5 MHz bandwidth)
1980ꢀ– 2300 MHz
2300ꢀ–ꢀ2400 MHz
2400ꢀ–ꢀ2690 MHz
2690ꢀ–ꢀ3400 MHz
3400ꢀ–ꢀ3800 MHz
20
28
26
23
35
20
53
50
53
53
54
55
52
30
49
45
25
45
20
28
44
30
28
26
38
52
57
63
59
56
59
57
55
55
59
59
46
53
44
31
–
ꢀ–ꢀ
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Attenuation (5)
dB
3800ꢀ–ꢀ5150 MHz
5150ꢀ–ꢀ6000 MHz
EVM
1807.5ꢀ–ꢀ1877.5 MHz
–
–
3
–
–
%
Source/Load Impedance (6)
Single-ended
50
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
3. Typical values are based on average measurements of 12 devices at room temperature.
4. This is defined as the worst difference between a peak and adjacent valley within defined frequency points.
5. Relative to zero dB.
6. This is the optimum impedance in order to achieve the performance shown.
Datasheet, December 4, 2018 | Subject to change without notice
5 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Electrical Specifications (1) – Band 3 Isolation
Test conditions unless otherwise specified. Temperature Range: −40 to +95 °C
Parameterꢀ(2)
Conditions
Min
54
53
45
47
–
Typꢀ(3)
56
Maxꢀ
Units
dB
1710ꢀ–ꢀ1780 MHz
1780ꢀ–ꢀ1785 MHz
1805ꢀ–ꢀ1875 MHz
1875ꢀ–ꢀ1880 MHz
Single-ended
–
–
–
–
–
64
dB
Isolation
51
dB
51
dB
Source/Load Impedance (4)
Notes:
50
1. All specifications are based on the Qorvo schematic for the main reference design.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
3. Typical values are based on average measurements of 12 devices at room temperature.
4. This is the optimum impedance in order to achieve the performance shown.
Electrical Specifications (5) – Band 3 Isolation
Test conditions unless otherwise specified. Temperature Range: −40 to +85 °C
Parameterꢀ(6)
Conditions
Min
54
53
48
48
–
Typꢀ(7)
56
Maxꢀ
Units
dB
1710ꢀ–ꢀ1780 MHz
1780ꢀ–ꢀ1785 MHz
1805ꢀ–ꢀ1875 MHz
1875ꢀ–ꢀ1880 MHz
Single-ended
–
–
–
–
–
64
dB
Isolation
51
dB
51
dB
Source/Load Impedance (8)
Notes:
50
5. All specifications are based on the Qorvo schematic for the main reference design.
6. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
7. Typical values are based on average measurements of 12 devices at room temperature.
8. This is the optimum impedance in order to achieve the performance shown.
Datasheet, December 4, 2018 | Subject to change without notice
6 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
QPQ1297EVB Evaluation Board
Bill of Material ꢀ–ꢀ QPQ1297EVB
Reference Designation
Description
Manufacture
Part Number
QPQ1297
U1
Duplexer, Band 3 BAW
Connector, SMA RF
Qorvo
P1, P2, P3
PCB
Radiall USA Inc.
Multiple
9602-1111-018
283666
Printed Circuit Board, Evaluation
Datasheet, December 4, 2018 | Subject to change without notice
7 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Performance Plots Band 3 Uplink
Test conditions unless otherwise noted: Temp= +25°C
Uplink Frequency Response
Uplink Passband Response
0
-1
-2
-3
-4
-5
-6
-20
d
B
d
B
-40
-60
-80
1595
1695
1795
1895
1995
1672.5
1710
1747.5
1785
1822.5
Frequency (MHz)
Frequency (MHz)
Uplink WidebandResponse
Uplink Return Loss
0
-10
-20
-30
-40
-50
-60
-70
0
-10
-20
-30
d
B
d
B
10
1507.5
3005
4502.5
6000
1672.5
1710
1747.5
1785
1822.5
Frequency (MHz)
Frequency (MHz)
Uplink Path - Ant Port Impedance
Uplink Port Impedance
1
1
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
0
-1
-0.5
0
0.5
1
-1
-0.5
0.5
1
-0.2
-0.4
-0.6
-0.8
-1
-0.2
-0.4
-0.6
-0.8
-1
Datasheet, December 4, 2018 | Subject to change without notice
8 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Performance Plots Band 3 Downlink
Test conditions unless otherwise noted: Temp= +25°C
Downlink Frequency Response
Downlink Passband Response
0
-1
-2
-3
-4
-5
-6
-10
-20
-30
d
B
d
B
-40
-50
-60
-70
1595
1695
1795
1895
1995
1767.5
1805
1842.5
1880
1917.5
Frequency (MHz)
Frequency (MHz)
Downlink Wideband Response
Downlink Return Loss
0
0
-10
-20
-30
-10
-20
-30
-40
-50
-60
-70
d
B
d
B
10
1507.5
3005
4502.5
6000
1767.5
1805
1842.5
1880
1917.5
Frequency (MHz)
Frequency (MHz)
Downlink Path - Ant Port Impedance
Downlink Port Impedance
1
1
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
-1
-0.5
0
0.5
1
-1
-0.5
0
0.5
1
-0.2
-0.4
-0.6
-0.8
-1
-0.2
-0.4
-0.6
-0.8
-1
Datasheet, December 4, 2018 | Subject to change without notice
9 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Performance Plots Isolation
Test conditions unless otherwise noted: Temp= +25°C
Isolation
0
-20
-40
d
B
-60
-80
-100
1595
1695
1795
1895
1995
Frequency (MHz)
Antenna Return Loss
0
-10
-20
-30
d
B
1672.5
1733.75
1795
1856.25
1917.5
Frequency (MHz)
Datasheet, December 4, 2018 | Subject to change without notice
10 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Package Dimensions
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
Datasheet, December 4, 2018 | Subject to change without notice
11 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Package Marking
Package Marking
Qorvo Logo
Product Identifier: 1297
Trace Code: XXXX
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be
necessary to suit end user assembly materials and processes.
Datasheet, December 4, 2018 | Subject to change without notice
12 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Tape and Reel Information – Carrier and Cover Tape Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2500 pieces on a 7” reel.
Feature
Measure
Symbol
Size (in)
0.094
0.114
0.043
0.157
0.079
0.138
0.213
0.315
Size (mm)
2.40
Length
A0
B0
K0
P1
P2
F
Width
2.90
Cavity
Depth
1.10
Pitch
4.00
Cavity to Perforation - Length Direction
2.00
Centerline Distance
Cavity to Perforation - Width Direction
3.50
Cover Tape
Carrier Tape
Width
Width
C
5.40
W
8.00
Datasheet, December 4, 2018 | Subject to change without notice
13 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Tape and Reel Information – Reel Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2,500 pieces on a 7” reel.
Feature
Measure
Symbol
Size (in)
6.969
0.559
0.346
2.283
0.512
0.079
0.787
Size (mm)
177.0
14.2
Diameter
A
W2
W1
N
Flange
Thickness
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
Key Slit Diameter
8.8
58.0
C
13.0
Hub
B
2.0
D
20.0
Datasheet, December 4, 2018 | Subject to change without notice
14 of 15
www.qorvo.com
QPQ1297
®
FDD Band 3 BAW Duplexer
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
Class 1C
ESDAꢁ/ꢁJEDEC JS-001-2012
ESDAꢁ/ꢁJEDEC JS-002-2014
IPC/JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) Class C3
MSLꢀ–ꢀMoisture Sensitivity Level
Level 3
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: NiAu (Plating thickness: Ni 5.0 ± 3.0 μm; Au 0.10 μm min.)
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information:
Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Datasheet, December 4, 2018 | Subject to change without notice
15 of 15
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明