QPQ2601 [QORVO]
Band 1/3/7 Multiplexer;
| 型号： | QPQ2601 |
| 厂家： | 
Qorvo |
| 描述： | Band 1/3/7 Multiplexer |
| 文件： | 总25页 (文件大小：1779K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPQ2601
Band 1/3/7 Multiplexer
Product Overview
The QPQ2601 is a compact, high-performance multiplexer
module fabricated using
a
patented technology with
performance optimized to enable carrier aggregation of bands
1, 3, and 7 for LTE/NR.
The QPQ2601 leverages the high-Q properties to ensure
minimal transmit insertion loss in all bands being multiplexed
without loading each other. The QPQ2601 module has also
been designed with high cross-isolation which is critical to
ensure good receive performance.
19 Pin 2.6 x 3.2mm leadless SMT package
The QPQ2601 uses unique Wafer Level Packaging (WLP)
techniques to enable a compact 2.6mm x 3.2mm x 0.8mm
footprint.
Key Features
• Compact Form-Factor: 2.6mm x 3.2mm
• Minimizes PA current drain with excellent TX IL
• Improved RX sensitivity with low RX IL
• Single-Ended
Functional Block Diagram
• RoHS Compliant, Pb-Free Module Package
Applications
• Base Station Infrastructure
• Small Cells
• Repeaters
• Routers
• LTE Dongles
B7 Rx
B3 Rx
B1 Rx
B7 Tx
B3 Tx
B1 Tx
• General Purpose Wireless
Ordering Information
Part Number
QPQ2601TR13
QPQ2601EVB
Description
5000 pieces on a 13” Reel
Evaluation Board (EVB)
Bottom View
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
1 of 25
QPQ2601
Band 1/3/7 Multiplex
Absolute Maximum Ratings
Parameter
Pin
Conditions
Rating
-40 to +105
+31
Units
°C
Storage Temperature
RF Input Power
6, 8, or 10
6, 8, or 10
CW, +55°C for 5k hours
dBm
dBm
Peak RF Input Power
Max duration 500ms, +25°C
+36.5
Operation of this device outside the parameter ranges given above may cause permanent damage.
Recommended Operating Conditions
Parameter
Min.
Typ.
Max.
Units
°C
TCASE
-40
+105
Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions.
Data Sheet Rev A, March 25, 2021
2 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Electrical Specifications(1) Band 1 Transmit - Antenna
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.88(2)
1.4:1
1.4:1
60
Max.
Units
Insertion Loss
VSWR (TX Port)
VSWR (ANT Port)
1920 MHz – 1980 MHz
-
3.1
2:1(3)
dB
1920 MHz – 1980 MHz
-
-
2:1
600 MHz – 1000 MHz
1452 MHz – 1496 MHz
1559 MHz – 1606 MHz
1805 MHz – 1880 MHz
2110 MHz – 2170 MHz
2400 MHz – 2500 MHz
2620 MHz – 2690 MHz
3840 MHz – 3960 MHz
4900 MHz – 5940 MHz
44
44
44
46
50
45
50
35
30
-
-
-
-
-
-
-
-
-
57
60
61
Attenuation
60
dB
67
70
72
60
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design
2. Typical specified as average at room temperature
3. Specified from -15°C to +85°C
Data Sheet Rev A, March 25, 2021
3 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Electrical Specifications(1) Band 1 Antenna - Receive
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.86(2)
1.4:1
1.4:1
55
Max.
Units
Insertion Loss
VSWR (RX Port)
VSWR (ANT Port)
2110 MHz – 2170 MHz
-
3
dB
2:1
2110 MHz – 2170 MHz
-
-
2:1
600 MHz – 1000 MHz
1710 MHz – 1785 MHz
1920 MHz – 1980 MHz
2400 MHz – 2500 MHz
2500 MHz – 2570 MHz
4900 MHz – 5150 MHz
5150 MHz – 5950 MHz
40
48
48
45
48
27
35
-
-
-
-
-
-
-
61
59
Attenuation
69
dB
66
35
41
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design
2. Typical specified as average at room temperature
Data Sheet Rev A, March 25, 2021
4 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Electrical Specifications(1) Band 3 Transmit - Antenna
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.85(2)
1.3:1
1.3:1
50
Max.
Units
Insertion Loss
VSWR (TX Port)
VSWR (ANT Port)
1710 MHz – 1785 MHz
-
3.6
dB
2:1
1710 MHz – 1785 MHz
-
-
2:1
600 MHz – 1000 MHz
1452 MHz – 1496 MHz
1559 MHz – 1606 MHz
1805 MHz – 1880 MHz
2110 MHz – 2170 MHz
2400 MHz – 2500 MHz
2620 MHz – 2690 MHz
3420 MHz – 3570 MHz
4900 MHz – 5900 MHz
40
40
-
-
-
-
-
-
-
-
-
44
45
50(3)
56
62
Attenuation
45
56
dB
40
56
45
64
40
65
30
43
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design
2. Typical specified as average at room temperature
3. Specified from +25°C to +85°C
Data Sheet Rev A, March 25, 2021
5 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Electrical Specifications(1) Band 3 Antenna - Receive
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
Typ.
1.87(2)
1.6:1
1.5:1
52
Max.
3.9(3)
Units
Insertion Loss
VSWR (RX Port)
VSWR (ANT Port)
1805 MHz – 1880 MHz
-
dB
2:1
1805 MHz – 1880 MHz
-
-
2:1
600 MHz – 1000 MHz
1710 MHz – 1785 MHz
1920 MHz – 1980 MHz
2400 MHz – 2500 MHz
2500 MHz – 2570 MHz
4900 MHz – 5950 MHz
40
44
45
45
45
35
-
-
-
-
-
-
60
58
Attenuation
dB
53
63
62
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design
2. Typical specified as average at room temperature
3. Integrated over any 5MHz bandwidth
Data Sheet Rev A, March 25, 2021
6 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Electrical Specifications(1) Band 7 Transmit - Antenna
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
-
Typ.
1.67(2)
1.5:1
1.4:1
47
Max.
3.4(3)
Units
Insertion Loss
VSWR (TX Port)
VSWR (ANT Port)
2500 MHz – 2570 MHz
2500 MHz – 2570 MHz
2500 MHz – 2570 MHz
600 MHz – 1000 MHz
1452 MHz – 1496 MHz
1559 MHz – 1606 MHz
1805 MHz – 1880 MHz
2110 MHz – 2170 MHz
dB
-
2:1
-
-
2:1
35
35
35
45
44
-
-
-
-
-
49
55
53
52
Attenuation
dB
2402.5 MHz – 2471.5 MHz(4)
WiFi CH1-11
2457.5 MHz – 2476.5 MHz(4)
WiFi CH12
43
36
46
46
-
-
2620 MHz – 2690 MHz
4900 MHz – 5900 MHz
45
28
61
31
-
-
Notes:
1. All specifications are based on the Qorvo schematic for the main reference design
2. Typical specified as average at room temperature
3. Specified from +25°C to +85°C
4. Each channel integrated over 19MHz
Data Sheet Rev A, March 25, 2021
7 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Electrical Specifications(1) Band 7 Antenna - Receive
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
-
Typ.
1.6(2)
1.5:1
1.6:1
53
Max.
Units
Insertion Loss
VSWR (RX Port)
VSWR (ANT Port)
2620 MHz – 2690 MHz
2620 MHz – 2690 MHz
2620 MHz – 2690 MHz
600 MHz – 1000 MHz
1710 MHz – 1785 MHz
1920 MHz – 1980 MHz
2400 MHz – 2500 MHz
2500 MHz – 2570 MHz
4900 MHz – 5950 MHz
2.7
dB
-
2:1
-
-
2:1
40
45
45
40
45
30
-
-
-
-
-
-
55
58
Attenuation
Notes:
dB
55
59
53
1. All specifications are based on the Qorvo schematic for the main reference design
2. Typical specified as average at room temperature
Data Sheet Rev A, March 25, 2021
8 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Electrical Specifications(1) Isolation
Unless Otherwise Noted: Operating Temp = −30ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
55
Typ.
60
59
59
62
61
63
58
64
63
57
60
69
66
62
57
66
62
57
Max.
Units
TX-RX Isolation in B1 RX
2110 MHz – 2170 MHz
1920 MHz – 1980 MHz
1805 MHz – 1880 MHz
1710 MHz – 1785 MHz
2500 MHz – 2570 MHz
2620 MHz – 2690 MHz
1805 MHz – 1880 MHz
1920 MHz – 1980 MHz
1710 MHz – 1785 MHz
2110 MHz – 2170 MHz
1920 MHz – 1980 MHz
2620 MHz – 2690 MHz
2500 MHz – 2570 MHz
2110 MHz – 2170 MHz
1710 MHz – 1785 MHz
2620 MHz – 2690 MHz
2500 MHz – 2570 MHz
1805 MHz – 1880 MHz
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TX-RX Isolation in B1 TX
55
TX-RX Isolation in B3 RX
55(2)(3)
55(3)
55
TX-RX Isolation in B3 TX
TX-RX Isolation in B7 TX
TX-RX Isolation in B7 RX
55
B1 TX to B3 RX Isolation in B3 RX
B1 TX to B3 RX Isolation in B1 TX
B3 TX to B1 RX Isolation in B3 TX
B3 TX to B1 RX Isolation in B1 RX
B1 TX to B7 RX Isolation in B1 TX
B1 TX to B7 RX Isolation in B7 RX
B7 TX to B1 RX Isolation in B7 TX
B7 TX to B1 RX Isolation in B1 RX
B3 TX to B7 RX Isolation in B3 TX
B3 TX to B7 RX Isolation in B7 RX
B7 TX to B3 RX Isolation in B7 TX
B7 TX to B3 RX Isolation in B3 RX
Notes:
55
55
55
dB
54
55
55
55
50
55
55
55
54(3)
1. All specifications are based on the Qorvo schematic for the main reference design
2. Specified from +25°C to +85°C
3. Integrated over any 5MHz bandwidth
Data Sheet Rev A, March 25, 2021
9 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Application Circuit Schematic
Note:
B1 TX (pin 10), B3 TX (pin 8), and B7 TX (pin 6) are terminated with complex impedance to provide flexible matching options for
optimizing TX performance between PA and QPQ2601. All other ports are matched to 50 ohm impedance
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
10 of 25
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – Pass Band
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
11 of 25
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – Narrow Band
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
12 of 25
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – Wide Band
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
13 of 25
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – ANT Port Return Loss/Impedance
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
14 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – TX Port Return Loss/Impedance
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
15 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – RX Port Return Loss/Impedance
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
16 of 25
www.qorvo.com
Subject to change without notice
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – Isolation
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
17 of 25
QPQ2601
Band 1/3/7 Multiplex
Performance Plots – Cross-Isolation
Test conditions unless otherwise noted: Temp. = +25 °C
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
18 of 25
QPQ2601
Band 1/3/7 Multiplex
Pin Configuration and Description
1
2
3
4
5
18 17 16 15 14
13
12
11
10
19
6
7
8
9
Top View
Pin Number
Label
ANT
Description
3
Band 1/3/7 Antenna Port
Band 7 Transmit Port
Band 3 Transmit Port
Band 1 Transmit Port
Band 1 Receive Port
Band 3 Receive Port
Band 7 Receive Port
6
B7 TX
B3 TX
B1 TX
B1 RX
B3 RX
B7 RX
8
10
14
16
18
1,2,4,5,7,9,11,
12,13,15,17,19
GND
Package Ground
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
19 of 25
QPQ2601
Band 1/3/7 Multiplex
Application Circuit
No external components are needed.
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
20 of 25
QPQ2601
Band 1/3/7 Multiplex
Evaluation Board (EVB) Assembly Layout.
Bill of Materials for EVB
Reference Des.
Value
N/A
Description
Band 1/3/7 Multiplexer
Manuf.
Qorvo
Part Number
U1
QPQ2601
Ji,J2,J3,J4,J5,J6,J7
PCB
N/A
RF Connectors
Various
Various
–
–
N/A
4-layer Printed Circuit Board
No external components are needed.
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
21 of 25
QPQ2601
Band 1/3/7 Multiplex
Package Marking and Dimensions
Package Marking Diagram
Package Outline Dimension Drawing
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
22 of 25
QPQ2601
Band 1/3/7 Multiplex
Package Mechanical Information
Recommended Land Pattern – Top View
Recommended Land Pattern Mask – Top View
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
23 of 25
QPQ2601
Band 1/3/7 Multiplex
Tape and Reel Information – Carrier and Cover tape Dimensions
Feature
Measure
Diameter
Symbol
Size (mm)
Feature
Measure
Symbol
Size (mm)
D1
W2
W1
D2
D3
B
330.0
18.2
12.8
102.0
13.0
2.0
Length
Width
Depth
Pitch
Ao
Bo
Ko
P1
P2
P3
W
2.8
3.5
Flange
Thickness
Cavity
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
1.16
4.0
Cavity to Perforation (Length)
Cavity to Perforation (Width)
Width
2.0
Centerline
Distance
Hub
5.5
Key Slit Diameter
D4
20.2
Carrier Tape
12.0
(Unless otherwise specified, all dimension tolerances per EIA-481)
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
24 of 25
QPQ2601
Band 1/3/7 Multiplex
Handling Precautions
PARAMETER
RATING
Class 1B
Class C3
Level 3
STANDARD
Caution!
ESD – Human Body Model (HBM)
ESD – Charged Device Model (CDM)
MSL – Moisture Sensitivity Level
ESDA/JEDEC JS-001
ESDA/JEDEC JS-002
IPC/JEDEC J-STD-020
ESD sensitive device
Solderability
Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes.
Package lead plating: Thin Ni ENEPIG
RoHS Compliance
This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment), as amended by Directive 2015/863/EU.
This product also has the following attributes:
•
•
•
•
•
•
Lead free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
PFOS
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2021 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet Rev A, March 25, 2021
Subject to change without notice
www.qorvo.com
25 of 25
相关型号：
©2020 ICPDF网 联系我们和版权申明