RFPA5218PCK401 [QORVO]
Wi-Fi Power Amplifier;型号: | RFPA5218PCK401 |
厂家: | Qorvo |
描述: | Wi-Fi Power Amplifier |
文件: | 总7页 (文件大小:564K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RFPA5218
Wi-Fi Power Amplifier
Product Overview
The Qorvo® RFPA5218 is a three-stage power amplifier (PA)
designed for Wi-Fi. The compact form factor and integrated
matching minimizes layout area in the application.
Performance is focused on optimizing for power consumption
while maintaining the highest linear output power and leading
edge throughput that leads to greater ranges.
16 Pin 3x3 mm Laminate Package
The design significantly minimizes external component needs
leading to a simplified board implementation and more
consistent performance at a system level over a variety of
conditions
Key Features
2400-2500ꢀMHz
The RFPA5218 integrates a 2 GHz power amplifier (PA),
regulator and a power detector for improved accuracy.
POUT = +24dBm MCS8/9 VHT20/40 -35dB Dynamic EVM
POUT = +25dBm MCS7 HT20 -30dB Dynamic EVM
POUT = +26dBm 802.11g -28dB Dynamic EVM
POUT = +28.5dBm 802.11b @ Spectral Mask Compliance
Optimized for +5 V Operation
32ꢀdB Tx Gain
Integrated DC Power Detector
MCS11 Capable
Functional Block Diagram
Applications
Access Points
Wireless Routers
Client Equipment
Customer Premise Equipment
Internet of Things
Ordering Information
Part Number
RFPA5218SB
RFPA5218SQ
RFPA5218SR
RFPA5218TR7
RFPA5218TR13
RFPA5218PCK401
Description
Sample bag with 5 pieces
Sample bag with 25 pieces
7” reel with 100 pieces
7” reel with 2500 pieces
13” reel with 5000 pieces
Evaluation Board with 5 loose pieces
Top View
Data Sheet 20160929 | Subject to change without notice
www.qorvo.com
1 of 7
RFPA5218
Wi-Fi Front End Module
Absolute Maximum Ratings
Parameter
Conditions
Rating
DC Supply Voltage
PA Enable Voltage
Storage Temperature
-0.5 to +6 V
-0.5 to VCC
-40 to 150ꢀ°C
Into 50ꢀΩ Load for 802.11a/n/ac (No
Damage), Transmit Mode
RF Input Power at RFIN
+12 dBm
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability.
Recommended Operating Conditions
Parameter
Min.
2412
2400
+4.5
+1.7
0
Typ.
Max.
2484
2500
+5.5
VCC
Units
MHz
MHz
V
Operating Frequency
Extended Operating Frequency
Device Voltage (VCC
)
+5
+3
PA Enable Voltage – High
PA Enable Voltage - Low
TOPERATING
V
+0.5
+85
V
-40
°C
Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions.
Electrical Specifications
Parameter
Conditions
Min.
Typ.
Max.
Units
TRANSMIT (RFIN-RFOUT) MODE
11ac VHT20/40 Output Power
Unless otherwise noted: VCC=5V, T=+25ºC, PA_EN=High
23
24
25
26
dBm
dB
MCS8/9 256QAM
MCS7 64QAM
OFDM 54MBps
-35
-30
11n HT20 Output Power
Dynamic EVM
23.5
24.5
dBm
dB
11g Output Power
dBm
dB
Dynamic EVM
-28
0
Margin to VHT40 Spectral Mask
Margin to HT20 Spectral Mask
Margin to 802.11g Spectral Mask
Margin to 802.11b Spectral Mask
Gain
POUT = +25.5 dBm, 11ac MCS0
POUT = +26 dBm, 11n MCS0
POUT = +27 dBm, OFDM 54MBps
POUT = +28.5 dBm, 1 MBps
3
3
dBc
dBc
dBc
dBc
dB
0
3
0
3
0
30
-0.35
10
32
Gain Flatness
Across any 40 MHz Channel
+0.35
dB
RFIN Port Return Loss
RFOUT Port Return Loss
Quiescent Current
17
9
dB
7
dB
RF Off
210
335
500
-35
-60
250
390
600
-30
-50
mA
mA
mA
POUT = +24 dBm
Operating Current
POUT = +28.5 dBm
2nd Harmonics
3rd Harmonics
POUT = +28.5 dBm 802.11b 1 MBps
POUT = +28.5 dBm 802.11b 1 MBps
dBm/MHz
dBm/MHz
Data Sheet 20160929 | Subject to change without notice
www.qorvo.com
2 of 7
RFPA5218
Wi-Fi Front End Module
Parameter
Conditions
Min.
Typ.
0.14
0.46
0.55
0.74
Max.
Units
RF Off
V
V
V
V
POUT = +24 dBm
POUT = +26 dBm
POUT = +28.5 dBm
DC Power Detect Voltage
GENERAL SPECIFICATIONS
Leakage Current
Unless otherwise noted: VCC=5V, T=+25ºC
0.1
0.1
0.5
µA
µA
Control Current - Low
TX Output P1dB
CW
+32
dBm
10<->90% Ref from Control Voltage to RF
Power
Ramp ON/OFF Time
300
4:1
nS
PA Stability - Output VSWR
Output Power Range
CW No Spurious above -50dBm/MHz
0
28.5
dBm
Thermal Resistance, θjc
Junction to case
40
°C/W
Data Sheet 20160929 | Subject to change without notice
www.qorvo.com
3 of 7
RFPA5218
Wi-Fi Front End Module
Evaluation Board Schematic
Timing Diagram
Data Sheet 20160929 | Subject to change without notice
www.qorvo.com
4 of 7
RFPA5218
Wi-Fi Front End Module
Pin Configuration and Description
Top View
Pin Number
Label
RFIN
PA_EN
GND
VCC
Description
1
2
3
4
5
6
RF input port for the PA. This port is matched to 50Ω and DC shorted internally.
Control voltage.
Ground connection.
Supply voltage. See applications schematic for biasing and bypassing components.
GND
GND
Ground connection.
Ground connection.
Power Detector voltage for the PA. May need external series R/shunt C to adjust voltage level and to
filter RF noise.
7
PDET
8
NC
No connect. This pin is not connected internally and can be left floating or connected to ground.
Ground connection
9
GND
RFOUT
RFOUT
GND
VCC2
NC
10
11
12
13
14
15
16
RF output port. This port is matched to 50Ω and DC blocked internally.
RF output port. This port is matched to 50Ω and DC blocked internally.
Ground connection
Supply voltage. See applications schematic for biasing and bypassing components.
No connect. This pin is not connected internally and can be left floating or connected to ground.
Supply voltage. See applications schematic for biasing and bypassing components.
Ground connection
VCC1
GND
Backside
Paddle
RF/DC ground. Use recommended via pattern to minimize inductance and thermal resistance. See
PCB Mounting Pattern for suggested footprint.
GND
Data Sheet 20160929 | Subject to change without notice
www.qorvo.com
5 of 7
RFPA5218
Wi-Fi Front End Module
Mechanical Information
Dimensions and PCB Mounting Pattern
Notes:
1. All dimensions are in mm. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
Data Sheet 20160929 | Subject to change without notice
www.qorvo.com
6 of 7
RFPA5218
Wi-Fi Front End Module
Handling Precautions
Parameter
Rating
Standard
Caution!
ESD – Human Body Model (HBM)
ESD – Charged Device Model (CDM)
MSL – Moisture Sensitivity Level
Class 1C
Class C3
Level 3
ANSI/ESD/JEDEC JS-001
ANSI/ESD/JEDEC JS-002
IPC/JEDEC J-STD-020
ESD sensitive device
Solderability
Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes.
Package lead plating: Electrolytic plated Au over Ni
RoHS Compliance
This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment), as amended by Directive 2015/863/EU.
This product also has the following attributes:
Lead free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or
liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the
latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to
any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS
INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND
ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet 20160929 | Subject to change without notice
www.qorvo.com
7 of 7
相关型号:
©2020 ICPDF网 联系我们和版权申明