TGL2201-SM [QORVO]
Wideband Dual Stage VPIN Limiter;
| 型号： | TGL2201-SM |
| 厂家： | 
Qorvo |
| 描述： | Wideband Dual Stage VPIN Limiter 限制器 射频 微波 |
| 文件： | 总10页 (文件大小：511K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TGL2201–SM
Wideband Dual Stage VPIN Limiter
®
Product Overview
Qorvo’s TGL2201-SM is a packaged dual stage Limiter
fabricated on Qorvo’s proven GaAs VPIN process.
Operating over 2 to 12 GHz, the TGL2201-SM provided
the limiting action at high input signal levels and low loss
at small signal.
The TGL2201-SM is suitable for a variety of wideband
systems such as LNA/receiver protection in radars,
phased arrays and jammers.
QFN 3 x 3 mm 16 L Package
Lead-free and RoHS compliant.
Key Features
• 2 to 12 GHz Passive, High Isolation Limiter
• Insertion Loss: < 1.0 dB, X-band
• Return Loss: > 10 dB
• Input Power CW Survivability up to 5 W
• Flat Leakage: < 18 dBm
• Recovery Time: < 115 ns
• Integrated DC Block on both input and output
• Package Dimensions: 3.00 x 3.00 x 1.35 mm
Functional Block Diagram
Applications
• LNA Receive Chain Protection
• Military Radar
Ordering Information
Part
Description
TGL2201–SM
Wideband VPIN Limiter
TGL2201-SM T/R
Wideband VPIN Limiter T/R
TGL2201-SM EVAL EVAL BOARD
Standard Order Quantity = 100 pieces in a waffle pack
Standard T/R size = 500 pieces on a 7” reel.
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
1 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
37 dBm
Parameter
Min
Typ
Max Units
Passive – No Bias
Temperature Range
RF Input Power, CW, 50 , 25 °C
Mounting Temperature (30 s max)
Storage Temperature
260 °C
-40
+25
+85 °C
-55 to 150 °C
Electrical specifications are measured at specified test
conditions. Specifications are not guaranteed over all
recommended operating conditions.
Exceeding any one or a combination of the Absolute Maximum
Rating conditions may cause permanent damage to the device.
Extended application of Absolute Maximum Rating conditions to
device may reduce device reliability.
Electrical Specifications
Test conditions unless otherwise noted: 25 °C
Parameter
Operational Frequency Range
Min
2
Typical
Max
12
Units
GHz
dB
Insertion Loss
0.5
12
1.0
Input Return Loss
10
10
dB
Output Return Loss
Flat Leakage Power @ PIN > 27 dBm
Recovery Time
12
dB
18
dBm
ns
< 115
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
2 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Performance Plots
Test conditions unless otherwise noted: Temp.=+25ꢀ°C
Insertion Loss vs. Frequency vs. Temperature
Return Loss vs. Frequency vs. Temperature
0.0
0
-55C
0.5
1.0
1.5
5
10
15
20
25
30
+25C
+85C
2.0
-55C
+25C
2.5
+85C
3.0
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20
Frequency (GHz)
Frequency (GHz)
Output Power vs. Input Power vs. Temperature
Frequency:10 GHz
20
15
10
-55C
5
+25C
+85C
0
5
10
15
20
25
30
35
40
Input Power (dBm)
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
3 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Application Circuit
3
2
1
4
5
6
7
8
U1
16
15
RF OUT/IN
RF IN/OUT
14
Z0 = 50
Z0 = 50
13
GND
9
10
11
12
17
Notes: A heat sink is recommended for high power operation (RF input > 1 W).
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
4 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Evaluation Board (EVB) Layout & Mounting Detail
Mounting Detail
Notes:
1. Top RF layer is 0.008” thick Rogers RO4003, єr = 3.55. Metal layers are 1-oz copper. Microstrip 50 Ω line width is .0174”. The
microstrip line tapers to a 0.014” width at the connector interface. This PCB is designed for the Southwest Microwave end
launch connector 1092-01A-5.
2. The pad pattern shown has been developed and tested for optimized assembly at Qorvo. The PCB land pattern has been
developed to accommodate lead and package tolerances. Since surface mount processes vary from company to company,
careful process development is recommended.
3. Ground / thermal vias are critical for the proper performance of this device. Vias should use a .35mm (#80 / .0135”) diameter
drill and have a final plated thru diameter of 0.25 mm (.010”).
4. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
5 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Pin Configuration and Description
Pin Description
Pin No.
Symbol
Description
1, 4, 9, 12
GND
Ground; Pins 1,4,9, and12 connected to 17 (backside paddle) inside package.
2, 3, 5, 8, 10, 11, 13, 16 N/C
No internal connection; may be grounded or left open on PCB
6, 7
RF IN/OUT Input or output, matched to 50 ohms
RF OUT/IN Output or input, matched to 50 ohms
14, 15
On PCB, multiple vias should be employed under 17 to minimize inductance and
thermal resistance; see page 8 for suggested mounting configuration.
17
GND
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
6 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Package Marking and Dimensions
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
TOLERANCE IS +/- 0.075
NOTES:
1. PACKAGE BASE: ALUMINUM NITRIDE (AIN)
2. PACKAGE LID: LCD (Liquid Crystal Polymer)
3. PAD FINISH ON PACKAGE BASE:
•
Electroless Gold (Au): 0.5 – 1.5 µm
OVER
•
Electroless Nickel (Ni): 2.0 µm minimum
4. PART MARKING:
2201: PART NUMBER
YY: PART ASSY YEAR
WW: PART ASSY WEEK
MXXX: BATCH ID
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
7 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Tape and Reel Information
Standard T/R size = 500 pieces on a 7” reel.
Size (in)
0.130
Size (mm)
3.30
Part
Cavity
Feature
Length
Width
Symbol
A0
B0
K0
0.130
0.059
3.30
1.50
Depth
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
8 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Solderability
1. Compatible with the latest version of J-STD-020, Lead-free solder, 260° C.
2. The use of no-clean solder to avoid washing after soldering is recommended.
3. The package base is Aluminum Nitride (AIN) and the plating material on the leads is gold over nickel (Au-Ni).
Recommended Soldering Profile
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
9 of 10
www.qorvo.com
TGL2201–SM
®
Wideband Dual Stage VPIN Limiter
Handling Precautions
Parameter
Rating Standard
Caution!
ESD-Sensitive Device
ESDꢁ–ꢁHuman Body Model (HBM)
MSLꢁ–ꢁMoisture Sensitivity Level
Class 1B ESDAꢀ/ꢀJEDEC JS-001
Level 3 IPC/JEDEC J-STD-020
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information: Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2019 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet Rev. D, April 11, 2019 | Subject to change without notice
10 of 10
www.qorvo.com
相关型号：
TGL2201-SMEVAL
Wideband Dual Stage VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
QORVO
TGL2201-SMT/R
Wideband Dual Stage VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2201-SMT/R
Wideband Dual Stage VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
QORVO
TGL2201_15
Wideband Dual Stage VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2203
Ka-Band 1 W VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2203_15
Ka-Band 1 W VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2205-SM
2-6 GHz 100 Watt VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2205-SM_15
2-6 GHz 100 Watt VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2206-SM
2.0-5.5 GHz 100 Watt VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2206-SM_15
2.0-5.5 GHz 100 Watt VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2207-SM
2.0-6.5 GHz 100 Watt VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TGL2207-SM_15
2.0-6.5 GHz 100 Watt VPIN LimiterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
©2020 ICPDF网 联系我们和版权申明