TGL2210 [QORVO]
0.05 â 6 GHz 100 Watt VPIN Limiter;
| 型号： | TGL2210 |
| 厂家： | 
Qorvo |
| 描述： | 0.05 â 6 GHz 100 Watt VPIN Limiter |
| 文件： | 总10页 (文件大小：654K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TGL2210-SM
0.05ꢀ–ꢀ6 GHz 100 Watt VPIN Limiter
®
Product Overview
The Qorvo TGL2210-SM is a high-power receive
protection circuit (limiter) operating from 0.05-
6GHz. Capable of withstanding up to 100 W incident
power levels, the TGL2210-SM allows < 17 dBm flat
leakage to pass through and contributes < 0.7 dB in
insertion loss.
Using Qorvo’s passive GaAs VPIN technology, the
TGL2210-SM does not require bias and is offered in a
small 4 x 4 (mm) plastic overmold package. This
simplifies system integration while maximizing
performance and protection.
QFN 4x4 mm 20L
Key Features
The TGL2210-SM is ideal for commercial and military
radar applications, communications systems and
electronic warfare where protecting sensitive receive
components from damage is critical.
• Frequency Range: 0.05 to 6.0 GHz
• Insertion Loss: < 0.7 dB
• Peak Power Handling: 100 W (pulsed)
• Flat Leakage: < 17 dBm
Lead-free and RoHS compliant.
• Passive (no DC bias required)
• Recovery time < 40 ns
• QFN Package Dimensions: 4.0 x 4.0 x 0.85 mm
Functional Block Diagram
Applications
• Receive Chain Protection
• Commercial and Military Radar
• Communications
• Electronic Warfare
Ordering Information
Part
TGL2210-SM
Description
0.05–6.0 GHz 100W VPIN Limiter
Top View
TGL2210-SMEVB-01 Evaluation Board
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
1 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Min Typ Max Units
Parameter
Rating
Incident Power, Pulsed (PW = 10µs, DC
= 10%), 50 , 85 °C
Operating Temperature Range -40
+25
+85
°C
110 W
Passive – No Bias
85 W
70 W
Incident Power, CW, 50 , 25 °C
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Incident Power, CW, 50 , 85 °C
Mounting Temperature
(30 s max)
260 °C
Storage Temperature
-55 to 150 °C
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical Specifications
Parameter
Conditions
Min
Typical
Max
6.0
Units
GHz
dB
Operational Frequency Range
Insertion Loss, Un-Tuned
Insertion Loss, Tuned
0.05
Freq = 3.5 GHz
Freq = 3.5 GHz (1)
0.6
0.4
0.85
dB
dB
Input Return Loss, Un-Tuned
Output Return Loss, Un-Tuned ꢀ
Flat Leakage Power
10
10
11
dB
11.5
< 17
< 40
< 0.5
0.001
dBm
ns
@ PIN > 30 dBm
Pulse Recovery Time
dB
Spike Leakage
dB/ °C
Insertion Loss Temperature Coefficient
Notes: Test conditions unless otherwise noted: Tempꢀ=ꢀ+25ꢀ°C, 50ꢀΩ system.
1. Tuned EVB to improve 2-5 GHz
Thermal and Reliability Information
Parameter
Test Conditions
Value
Units
W
31
4.5 GHz, CW, 50 , 25 °C
Incident Power
(168 hours RF Operational Life Test (1)
)
100
W
4.5 GHz, Pulsed, PW=10 µs, DC=10%, 50 , 25 °C
Notes:
1. Test was terminated at 168 hours. Insertion Loss remained ≤ 1 dB for device under test.
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
2 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Performance Plots – Small Signal
Test conditions unless otherwise noted: Temp.=+25ꢁ°C
Insertion Loss vs. Frequency vs. Temp.
Insertion Loss vs. Frequency vs. Temp.
0.0
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
Tuned EVB
Un-Tuned EVB
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
- 40 °C
- 40 °C
+25 °C
+85 °C
-0.8
+25 °C
-0.9
+85 °C
-1.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
Frequency (GHz)
Frequency (GHz)
Input Return Loss vs. Freq. vs. Temp.
Input Return Loss vs. Freq. vs. Temp.
0
-5
0
-5
Tuned EVB
Un-Tuned EVB
-10
-15
-20
-25
-30
-10
-15
-20
-25
-30
- 40 °C
+25 °C
+85 °C
- 40 °C
+25 °C
+85 °C
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
Frequency (GHz)
Frequency (GHz)
Output Return Loss vs. Freq. vs. Temp.
Output Return Loss vs. Freq. vs. Temp.
0
0
-5
Tuned EVB
Un-Tuned EVB
-5
-10
-15
-20
-25
-30
- 40 °C
+25 °C
+85 °C
-10
-15
-20
-25
-30
- 40 °C
+25 °C
+85 °C
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
Frequency (GHz)
Frequency (GHz)
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
3 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Performance Plots – Small Signal
Test conditions unless otherwise noted: Temp.=+25ꢁ°C
Insertion Loss vs. Frequency
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
Temp. = 25 °C
TUNED
UN-TUNED
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
Frequency (GHz)
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency.
0
-5
0
Temp. = 25 °C
Temp. = 25 °C
-5
-10
-15
-20
-25
-30
-10
-15
-20
-25
-30
TUNED
TUNED
UN-TUNED
UN-TUNED
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
Frequency (GHz)
Frequency (GHz)
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
4 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Performance Plots – Large Signal
Test conditions unless otherwise noted: Temp.=+25ꢁ°C
Output Power vs. Input Power vs. Freq.
Output Power vs. Input Power vs. Temp.
18
18
16
14
12
10
8
CW
Temp. = 25 °C
CW
16
14
12
10
8
6
6
- 40 °C
+25 °C
+85 °C
4
4
2
2
0.05 GHz
3.0 GHz
0.2 GHz
4.0 GHz
1.0 GHz
5.0 GHz
2.0 GHz
6.0 GHz
0
0
-2
-4
-2
-4
Freq. = 4.0 GHz
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30
Input Power (dBm)
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30
Input Power (dBm)
Output Power vs. Input Power vs. Temp.
Output Power vs. Input Power vs. Freq.
18
17
16
15
14
13
12
11
10
18
17
16
15
14
13
12
11
10
CW
Temp. = 25 °C
CW
- 40 °C
+25 °C
+85 °C
0.2 GHz
1.0 GHz
5.0 GHz
2.0 GHz
5.5 GHz
3.0 GHz
6.0 GHz
4.0 GHz
Freq. = 4.0 GHz
30
32
34
36
38
40
42
44
46
48
50
30
32
34
36
38
40
42
44
46
48
50
Input Power (dBm)
Input Power (dBm)
Output Power vs. Frequency vs. Temp.
18
17
16
15
14
13
12
11
10
CW
- 40 °C
+25 °C
+85 °C
PIN = 30 dBm
0
1
2
3
4
5
6
7
Frequency (GHz)
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
5 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Performance Plots – Large Signal
Test conditions unless otherwise noted: Temp.=+25ꢁ°C
Output Power vs. Input Power vs. Freq.
Output Power vs. Input Power vs. Temp.
20
20
19
18
17
16
15
14
13
12
11
10
Pulsed: PW = 10 µs, DC = 10 %
Freq. = 4.0 GHz
Pulsed: PW = 10 µs, DC = 10 %, Temp. = 25 °C
19
18
17
16
15
14
13
- 40 °C
+25 °C
+85 °C
0.2 GHz
3.0 GHz
1.0 GHz
4.0 GHz
2.0 GHz
5.0 GHz
12
11
10
30 32 34 36 38 40 42 44 46 48 50 52
Input Power (dBm)
30 32 34 36 38 40 42 44 46 48 50 52
Input Power (dBm)
Output Power vs. Frequency
20
19
18
17
16
15
14
13
12
11
10
Pulsed: PIN = 50.5 dBm, PW = 10 µs, DC = 10 %
Temp. = 25°C
0
1
2
3
4
5
6
Frequency (GHz)
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
6 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Evaluation Board PCB Information and Mounting Detail
TUNED PCB LAYOUT
Tuning stub (mils)
29.2
229.2
29.9
MOUNTING PATTERN
RF layer is 0.008” thick Rogers RO4003C. Metal layers are 0.5-oz copper. Microstrip 50 Ω line width is 0.050”. The microstrip line taper
at the connector interface is optimized for the Southwest Microwave end-launch connector 1092-02A-5.
The pad pattern shown has been developed and tested for optimized assembly at Qorvo. The PCB land pattern has been developed to
accommodate lead and package tolerances. Since surface mount processes vary from company to company, careful process
development is recommended.
➢
➢
Ground / thermal vias under the DUT are critical for the proper performance of this device.
The PCB shown herein utilizes copper filled vias (10 mils diameter) under the DUT to maximize heat transfer away from the DUT
under large signal conditions.
➢
Thermal dissipation is low for normal non-limiting operation.
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
7 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Package Marking, Dimensions and Pad Description
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
Tolerances: XX = ± .25
XXX = ± .100
2. Package Leads Are Gold Plated (NiPdAu)
3. Part Is Mold Encapsulated
4. Part Marking:
2210: Part Number
YY: Part assembly Year
WW: Part Assembly Week
XXXX: Batch ID
Package Pad
Symbol
Description
1, 2, 4ꢀ–ꢀ13, 15ꢀ–ꢀ20
NC
No Connection; recommend GND at the EVB level
3
RF Input
Input; matched to 50 Ohms; not DC blocked
Output; matched to 50 Ohms; not DC blocked
14
RF Output
On PCB; multiple vias should be employed under the center pad (21)
to minimize inductance and thermal resistance; see page 9 for
suggested mounting configuration
21 (Slug)
GND
Note: The RF Input and Output ports are not interchangeable.
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
8 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Plating is Ni-Pd-Au, Au thickness of 0.00254-0.01016 µm.
Recommended Soldering Profile
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
9 of 10
www.qorvo.com
TGL2210-SM
®
0.05ꢀ–ꢀ6.0 GHz 100 Watt VPIN Limiter
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
Class 3B
ANSI/ESDA/JEDEC JS-002
ANSI/ESDA/JEDEC JS-001
IPC/JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) Class C3
MSLꢀ–ꢀMoisture Sensitivity Level
Level 3
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information: Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet Rev. B, October 2, 2018 | Subject to change without notice
10 of 10
www.qorvo.com
相关型号：
©2020 ICPDF网 联系我们和版权申明