QBLP650-IR1 [QT]
LED CHIP IR WLP 940NM 1206 SMD;型号: | QBLP650-IR1 |
厂家: | QT OPTOELECTRONICS |
描述: | LED CHIP IR WLP 940NM 1206 SMD |
文件: | 总9页 (文件大小:479K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
QT-Brightek Chip LED Series
1206 IR LED
Part No.: QBLP650-IR1
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 1 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Table of Contents:
Introduction ...........................................................................................................................................3
Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................4
Absolute Maximum Rating ....................................................................................................................4
Characteristic Curves............................................................................................................................5
Solder Profile & Footprint......................................................................................................................6
Packing.................................................................................................................................................7
Labeling ................................................................................................................................................8
Ordering Information.............................................................................................................................8
Revision History....................................................................................................................................9
Disclaimer .............................................................................................................................................9
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 2 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Introduction
Feature:
Application:
Water clear lens
Package in tape and reel
1206 Package
AlGaAs technology
Viewing Angle = 140 deg
Infrared Sensor
Optoelectronic Switch
Smoke detector
Drive sensor
Certification & Compliance:
TS16949
Description:
ISO9001
RoHS Compliant
This top mount bright 1206 LEDs have a height
profile of 1.1mm, which is ideal in any kind of back
lighting application. Also, it is a light weight model
that is good for miniature products.
Dimension:
Units: mm / tolerance = +/-0.1mm
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 3 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Electrical / Optical Characteristic (Ta=25 oC)
VF (V)
λP (nm)
Ie (mW/sr)
Typ.
Product
Color IF (mA)
Typ. Max. Min.
Typ. Max. Min.
Max.
QBLP650-IR1 Infrared
20
1.2
1.6
930
940
950
0.2
0.55
1.10
Absolute Maximum Rating
Material
Pd (mW)
IF (mA)
IFP (A)*
VR (V)
TOP (oC)
-40 ~ +80
TST (oC)
TSOL (oC)**
AlGaAs
80
50
1
5
-40 ~ +85
260
*Duty cycle=1%, Pulse width 100us
**IR Reflow for no more than 10 sec @ 260 oC
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 4 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Characteristic Curves
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 5 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Solder Profile & Footprint
-Recommended tin solder specifications: melting temperature in the range of 178~192 OC
-The recommended reflow soldering profile is as follows (temperatures indicated are as measured
on the surface of the LED resin):
Recommended Pad Layout
Units: mm
Tolerance: ± 0.1mm
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 6 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Packing
Reel Dimension:
Unit: mm
Tape Dimension:
SEC.A-A
A
A
Unit: mm
Arrangement of Tape:
Packaging Specification:
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 7 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Labeling
Ordering Information
Part #
Orderable Part # Spec Range
Quantity per reel
3,000 units
Ie=0.55mW/sr typ. / λP=940nm typ. @
IF=20mA
QBLP650-IR1 QBLP650-IR1
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 8 of 9
QBLP650-IR1
1206 LED
---------------------------------------------------------------------------------------------------------------------------------------
Revision History
Description:
Revision #
V1.0
Revision Date
05/04/2015
New Release of QBLP650-IR1
Disclaimer
QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to
improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under
its patent rights, nor the rights of others.
Life Support Policy
QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or
systems without the express written approval of QT-BRIGHTEK. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in
a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Product: QBLP650-IR1
Date: May 04, 2015
Version# 1.0
Page 9 of 9
相关型号:
©2020 ICPDF网 联系我们和版权申明