TY4230A-LZ-0.28-10.000-S3-3 [RALTRON]
Oscillator, 10MHz Min, 40MHz Max, 10MHz Nom;
| 型号： | TY4230A-LZ-0.28-10.000-S3-3 |
| 厂家： | 
Raltron Electronics Corporation |
| 描述： | Oscillator, 10MHz Min, 40MHz Max, 10MHz Nom |
| 文件： | 总2页 (文件大小：109K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DIGITAL TCXO
SMD STRATUM 3 DIGITAL (VC) TCXO, TU230 AND TY230 SERIES
ꢁ
FEATURES:
− Fully meeting free run frequency accuracy and 24 hours maximum frequency drift requirements for
STRATUM 3 according to Telecordia GR-1244-CORE*
− Very low power consumption suitable for portable and/or battery operated equipment
ꢁ
ELECTRICAL SPECIFICATION**
PARAMETER
Supply voltage, nom.
HCMOS / LVCMOS Supply current, max.
CLIPPED SINWAVE
SYMBOL
Vs
Is
CONDITIONS
VALUE
UNIT
V
mA
Vs 5%
3.3
5.0
Vs, nom. / Ta=25°C
12.0 to 20.0
2.0 to 5.0
10.000 to 40.000
4.6
Frequency, nom.
fo
∆fc/fo
-
MHz
ppm
Overall frequency stability over 10 years of
operation including Initial Frequency
Calibration
Ta=-40°C to + 85°C
or
Ta= 0°C to +70°C
Frequency drift during 24 hours of continuous
operation, max (See note 1)
Ta=-40°C to + 85°C
or
Ta= 0°C to + 70°C
Ta=-40°C to + 85°C
0.37
0.30
ppm
∆fc/fo
Temperature Stability (See note 2)
ppm
or
Ta= 0°C to + 70°C
-
Vc= 0.25V
Vc= 2.25V
-
0.28
ppm
V
PPM
PPM
Control voltage range
Vc
+0.25…+2.25
-5 …-10
+5 …+10
100
Frequency Adjustment Range
(see note 3)
∆f/fo (Vc)
Voltage control (pin 1) input impedance, min.
(see note3)
Zin
kΩ
Jitter (peak to peak), max
(Fnom = 20 MHz)
J(f)
10
ps
Offset ∆f = 12kHz to 20MHz
Phase noise SSB @ freq.offset, max
(Fnom = 20 MHz)
-80
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
£ (∆f)
∆f=10Hz
-110
-130
-145
∆f=100Hz
∆f=1kHz
∆f ≥ 10kHz
HCMOS output levels
Clipped Sine
VOH/VOL Load = 15pF
Vout
0.9Vcc / 0.1Vcc
0.7
V
Vp-p
Load=10 kΩ||20pF
ꢁ
ENVIRONMENTAL SPECIFICATION
Storage temperature range
-
-
-45°C….+85°C
Vibration
IEC 68-2-6, test Fc:
10..500 Hz, 10g, 2 h, 3 directions
IEC 68-2-27, test Ea:
100g, ½ sine, 3 bumps, 6 directions
All parameters within initial
limits
All parameters within initial
limits
Mechanical shocks
-
Notes:
1. The 24 hours drift can be measured any time after minimum 1 hour from initial turn on. Please contact factory
for details.
2. The Temperature Stability is calculated with regard to frequency reading at 25°C 1°C.
3. TY230 series only.
* Telecordia is a trademark of Telecordia Technologies
** This specification is typical. Other frequencies, output types and custom parameters are available. Please, contact
factory for details.
ꢀ
REFLOW PROFILE
RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19t h St ꢀMiami, Florida 33172 ꢀU.S.A.
phone: +001(305) 593-6033 ꢀfax: +001(305)594-3973 ꢀe-mail: sales@raltron.com ꢀinternet: http://www.raltron.com
DIGITAL TCXO
ꢀHOW TO ORDER (PART NUMBER)
Prefix
Output
Type
Series
Revision Temperature Range
Stability
Frequency Stratum3 Voltage
TU: No Freq.
Adjust option
0: CLIPPED 230
SINE
2:HCMOS
A
LZ: +0°C to +70°C
D3: -40°C to +85°C
0.28=
0.28PPM
In MHZ
S3
3: 3.3V
5: 5.0V
TY: With Freq 4:LVCMOS
Adjust
0.3=
0.3PPM
Example:
Voltage
Stratum 3
Frequency 19.44MHz
TU0230A-LZ- 0.28 -19.440 – S3- 3
Temp Stability = 0.28 x 10E-6 = 0.28 PPM
Operating Temp Range = 0°C to +70°C
Revision "A"
Series
Output CLIPPED SINE
Prefix: Digital TCXO – No Freq. Adjust
ꢀ
MECHANICAL SPECIFICATION
.05
.417MAX.
(10.6MAX.)
(6 PLACES)
OUTLINE TOLERANCE:
0.015” / 0.4mm
(1.27)
PIN FUNCTIONS:
[ 1 ] V.C. / N.C.*
[ 2 ] CASE/GROUND
[ 3 ] INT. CONNECTED**
[ 4 ] RF OUTPUT
[ 5 ] SUPPLY VOLTAGE
[ 6 ] INT. CONNECTED**
4
2
1
3
* TU230 ONLY
** Pins 3 and 6 used for
programming. It is
6
5
recommended to leave
them floated, but soldered
to board for additional
mechanical strength.
DENOTES PIN 1
LOCATION.
.508(+0.004/-0.05)
.300
(7.62)
12.9 (+0.1/-1.3)
RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19t h St ꢀMiami, Florida 33172 ꢀU.S.A.
phone: +001(305) 593-6033 ꢀfax: +001(305)594-3973 ꢀe-mail: sales@raltron.com ꢀinternet: http://www.raltron.com
相关型号：
©2020 ICPDF网 联系我们和版权申明