PTC100CPN-1200-BB672 [RCD]
PTC Thermistor, 120ohm, Through Hole Mount, RADIAL LEADED;
| 型号： | PTC100CPN-1200-BB672 |
| 厂家： | 
RCD COMPONENTS INC. |
| 描述： | PTC Thermistor, 120ohm, Through Hole Mount, RADIAL LEADED CD 温度传感 电阻器 |
| 文件： | 总1页 (文件大小：22K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RESISTORS
wCAPS&COILSwDELAYLINES
ECONOMICAL RTD ELEMENTS
PLATINUM, NICKEL, NICKEL IRON
TEMPERATURE RATING UP TO 500°C
High temperature RTD (Resistance Temperature Detector)
elements are designed for the toughest industrial applications.
PTC sensors feature an all-welded construction for increased
durability under stress and vibration. Wirewound element results
in exceptional stability and uniformity. Series PTC elements can
be used to sense or regulate air environments and can be
assembled into immersion probes for liquid environments (refer to
PTS Series).
PTC SERIES
FEATURES
r Inherent wirewound stability
r Standard tolerance: ±1% (available to ±0.1%)
r Resistance range: 1Ω to 1000Ω
r High-temperature ceramic encased construction
r Operating temperature range: -55°C to maximum listed
r Thin-film platinum elements available (see PTF Series)
d
↓
↑
↓
B
↑
←
A →
Temperature
Coefficient
0° to 100°C
Max.
Resistance
(Ohms)
RCD
Type
Resistance
Wire
TC 3-digit
code
A
B
C*
Typ. [.05]
±.060 [1.5] ±.01 [.25]
PTC100PT
PTC100CPN Chem. Pure Nickel
PTC100N
PTC100NF
PTC150PT
Platinum
3850ppm
6720ppm
6000ppm
5150ppm
3850ppm
6720ppm
6000ppm
5150ppm
3850ppm
6720ppm
6000ppm
5150ppm
392
672
603
522
392
672
603
522
392
672
603
522
200
120
120
500
400
200
200
1000
400
200
200
1000
.016 [.4]
Lead Length 0.5 [12.7] min.
.575 [14.6]
.575 [14.6]
.675 [17.1]
.096 [2.44]
.125 [3.18]
.170 [4.32]
Nickel 270
Nickel Iron
Platinum
PTC150CPN Chem. Pure Nickel
.016 [.4]
Lead Length 0.5 [12.7] min.
PTC150N
PTC50NF
PTC200PT
PTC200CPN Chem. Pure Nickel
PTC200N
Nickel 270
Nickel Iron
Platinum
.020 [.5]
Lead Length 1.0 [25.4] min
Nickel 270
Nickel Iron
PTC200NF
* Lead material is nickel for minimal oxidation at high temperature on platinum elements, tinned copperweld is standard on others.
LINEARITY
WIRE COMPARISON
4.0
Wire Alloy
Platinum
CP Nickel
Nickel 270
Nickel Iron
Cost
Medium
High
Low
Low
Max. Temp.
500°C
Linearity
Excellent
Fair
R/T Curve Repeatability
Excellent
Good
Fair
CP NICKEL
NICKEL 270
3.5
3.0
2.5
2.0
1.5
1.0
0
300°C
300°C
260°C
Fair
Fair
Good
THERMAL RESPONSE (TIME CONSTANT) varies with different element sizes, resistance values, and wire alloy.
Typical time constant for PTC 150 PT 100 ohm is 2.2 seconds in water moving 3ft./sec. Consult factory for
particular specifications.
NICKEL IRON
SELF-HEATING is contingent upon resistance value, alloy, and element size. Typical self-heating for PTC 150 PT
100 ohm is 65 mW/°C in water moving at 3ft./sec. Consult factory for particular specifications.
COPPER
INTERCHANGEABILITY - The strain-free design of RCD sensors insures maximum repeatability. This characteris-
tic is degraded by lot-to-lot inconsistencies of the various wire alloys. Platinum being extremely consistant allows
the best interchangeability characteristics. Consult factory for specific data based on particular alloy and
tolerance.
PLATINUM
SHOCK AND VIBRATION - PTC elements withstand 100 G’s sinewave shock for 3 cycles at 10 milliseconds,
and withstand vibration 10Hz to 2200Hz at 20 G’s.
0
100 200 300 400 500 600
P/N DESIGNATION:
RCD Type
4-Digit Resis. Code: 3 signif. digits
& multiplier (1R00=1Ω, 10R0=10Ω, 1000=100Ω, etc.)
Tolerance Code: F=1%, D=0.5%, C=0.25%, B=0.1%
Packaging: B = Bulk
PTC150PT
-
1000 -
F
B
392
32 212 392 572 752 932 1112
°C
TEMPERATURE
°F
Temp. Coefficient: 3 digit code--rounded to nearest 100 (392=3850ppm, 603=6000ppm, etc.)
RTD PROBES
TEMPERATURE RATING UP TO 500°C
PTC ceramic encased elements can be assembled into stainless steel
sheaths for severe environmental requirements. These probes (PTS
Series) are moistureproof and pressure tight and in many instances may
be directly inserted into process lines or thermowells for precise
temperature readings. Series PTS are available in any standard PTC
resistance value and temperature coefficient, in .125 [3.18], .187 [4.75],
.250 [6.35] diameters. Teflon insulated leads are standard. Other
insulations available for highest temperature requirements, 3-terminal, 4-
terminal configurations available. Probe lengths available from 0.5
[12.7] to 18 [457]. Consult factory for list of standard probe
styles including surface measurement, flange mount, screw
mount, etc.
PTS SERIES
ä
OPTIONAL
RCD Components Inc., 520 E. Industrial Park Dr., Manchester, NH, USA 03109
Tel: (603) 669-0054 Fax:(603) 669-5455 E-mail: sales@rcdcomponents.com www.rcdcomponents.com
FA specifications subject to change without notice
相关型号：
PTC100NF-5000-BB522
RTD Nickel Iron Sensor, 500ohm, Rectangular, Through Hole Mount, RADIAL LEADED
RCD
PTC100NF-5000-BB522W
RTD Nickel Iron Sensor, 500ohm, Cylindrical, Through Hole Mount, ROHS COMPLIANT, 2 PIN
RCD
PTC100NF-5000-CB522
RTD Nickel Iron Sensor, 500ohm, Rectangular, Through Hole Mount, RADIAL LEADED
RCD
PTC100NF-5000-CB522W
RTD Nickel Iron Sensor, 500ohm, Cylindrical, Through Hole Mount, ROHS COMPLIANT, 2 PIN
RCD
PTC100NF-5000-DB522
RTD Nickel Iron Sensor, 500ohm, Rectangular, Through Hole Mount, RADIAL LEADED
RCD
PTC100NF-5000-DB522W
RTD Nickel Iron Sensor, 500ohm, Cylindrical, Through Hole Mount, ROHS COMPLIANT, 2 PIN
RCD
PTC100NF-5000-FB522
RTD Nickel Iron Sensor, 500ohm, Rectangular, Through Hole Mount, RADIAL LEADED
RCD
PTC100NF-5000-FB522W
RTD Nickel Iron Sensor, 500ohm, Cylindrical, Through Hole Mount, ROHS COMPLIANT, 2 PIN
RCD
©2020 ICPDF网 联系我们和版权申明