RP15-2405DFN [RECOM]
15 Watt 2” x 1” Package Single & Dual Output; 15瓦2 “× 1 ”包单,双输出![RP15-2405DFN](http://pdffile.icpdf.com/pdf1/p00104/img/icpdf/RP15-1205DF_562403_icpdf.jpg)
型号: | RP15-2405DFN |
厂家: | ![]() |
描述: | 15 Watt 2” x 1” Package Single & Dual Output |
文件: | 总4页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
● 2:1 Wide Input Voltage Range
● 15 Watts Output Power
● 1.6kVDC Isolation
POWERLINE
Features
DC/DC-Converter
● UL Certified
● Fixed Operating Frequency
● Six-Sided Continuous Shield
● Standard 50.8 x25.4x10.2mm Package
● Efficiency to 88%
RP15-
S_DF
Series
15 Watt
Selection Guide 12V, 24V and 48V Input Types
2” x 1” Package
Single & Dual
Output
Part Number
Input
Range
Output
Voltage
Output
Current
Input (4) Efficiency(5) Capacitive(6)
Current
Load max.
VDC
VDC
3.3
5
mA
mA
%
µF
RP15-123.3SF
RP15-1205SF
RP15-1212SF
RP15-1215SF
RP15-243.3SF
RP15-2405SF
RP15-2412SF
RP15-2415SF
RP15-483.3SF
RP15-4805SF
RP15-4812SF
RP15-4815SF
RP15-1205DF
RP15-1212DF
RP15-1215DF
RP15-2405DF
RP15-2412DF
RP15-2415DF
RP15-4805DF
RP15-4812DF
RP15-4815DF
9-18
4000
3000
1250
1000
4000
3000
1250
1000
4000
3000
1250
1000
1500
625
1467
1603
1524
1524
724
79
82
86
86
80
84
85
85
81
83
87
86
83
86
84
84
86
86
85
88
87
10200
7050
1035
705
9-18
9-18
12
15
3.3
5
9-18
18-36
18-36
18-36
18-36
36-75
36-75
36-75
36-75
9-18
10200
7050
1035
705
781
12
15
3.3
5
772
772
357
10200
7050
1035
705
396
UL-60950-1 Certified
12
15
5
377
381
1582
1524
1563
781
1020
495
9-18
12
15
5
9-18
500
165
18-36
18-36
18-36
36-75
36-75
36-75
1500
625
1020
495
12
15
5
762
500
762
165
1500
625
386
1020
495
12
15
372
500
377
165
* add /PP for CTRL function with Positive Logic (1=ON, 0=OFF)
* add /NN for CTRL function with Negative Logic (0=ON, 1=OFF)
Description
The F-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all
Telecom and safety applications where approved isolation is required.
They also meet UL 1950 and CSA 950 standards.
July-2006
240
www.recom-international.com
POWERLINE
RP15-S_DF
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP15-4805SF
RP15-4805SF With Heat Sink
125
100
75
125
100
75
Natural Convection
Natural Convection
50
50
25
0
25
0
50 60
80 90 100
-25 -10 0
50
70 80 90 100
60
-40 -25 -10 0
-40
70
Ambient Temperature Range (°C)
Ambient Temperature Range (°C)
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at info@recom-development.at
Typical Characteristics
RP15-4805SF
RP15-4805SF
Efficiency VS Output load
Efficiency VS Input Voltage
83
82
83
82
81
80
79
78
77
76
70
65
81
80
79
78
77
76
75
74
50
0.5
73
36 40
2
1
1.5
2.5
3
60 65
70 75
45
50
55
Output Load (A)
Input Voltage (V)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
9-18VDC
18-36VDC
36-75VDC
24V nominal input
48V nominal input
Input Filter
Pi Type
Input Surge Voltage (100 ms max.)
12V Input
24V Input
48V Input
36VDC
50VDC
100VDC
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
20mAp-p
20ms typ.
Remote ON/OFF (Optional. See Note 7)
(Positive logic)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Nominal input
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
20mA
(Negative logic)
Remote OFF input current
Output Power
15W max.
continued on next page
www.recom-international.com
July-2006
241
POWERLINE
RP15-S_DF
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Output Voltage Accuracy (full Load and nominal Vin)
Minimum Load (see Note 1)
1%
10% of full load
1%
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Single
Dual
1%
2%
Cross Regulation (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
5%
Single
Dual
50mVp-p
75mVp-p
Temperature Coefficient
0.02%/°C max.
500µs
Transient Response (25% load step change)
Over Voltage Protection
3.3V
5V
3.9V
6.2V
15V
18V
Zener diode clamp (only single)
12V
15V
Over Load Protection (% of full load at nominal Vin)
Short Circuit Protection
Efficiency
150% typ
Hiccup, automatic recovery
see „Selection Guide“ table
1600VDC min.
Isolation Voltage
Isolation Resistance
1 GΩ min.
Isolation Capacitance
Operating Frequency
300pF max.
Single
Dual
500kHz typ.
300kHz typ.
Approved to Safety Standards
Operating Temperature Range
Maximum Case Temperature
Storage Temperature Range
UL 1950, EN60950
-40°C to +85°C(with derating)
+100°C
-55°C to +105°C
12°C/Watt
Thermal Impedance
(see Note 8)
Natural convection
Natural convection with Heat Sink
10°C/Watt
MIL-STD-810D
Thermal Shock
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
5% to 95% RH
Relative Humidity
Case Material
Base Material
Potting Material
Nickel plated copper
Non-conductive black plastic
Epoxy (UL94-V0)
Conducted Emissions (see Note 9)
Radiated Emissions
ESD
EN55022
Level A
Level A
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
continued on next page
July-2006
242
www.recom-international.com
POWERLINE
RP15-S_DF
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Weight
27g
50.8 x 25.4 x 10.2mm
2041 x 103 hours
Dimensions
MTBF (see Note 2)
Notes :
1. The RP15 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SF/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SF/N).
If no suffix is specified, the control pin will be omitted.
8. Heat sink is optional and P/N: 7G-0020A.
9. See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.80
25.40
10.20
dia.
1.0
5.6
2.50
5.10
15.20
20.30
Pin Connections
Pin #
1
2
3
4
5
6*
Single
+Vin
-Vin
+Vout
No Pin
-Vout
CTRL*
Dual
+Vin
-Vin
+Vout
Com
3
4
5
10.20
10.20
Bottom View
1
2
-Vout
CTRL*
12.70
6
* Optional. See Note 7.
Pin Pitch Tolerance 0.35 mm
www.recom-international.com
July-2006
243
相关型号:
©2020 ICPDF网 联系我们和版权申明