RP20-4812DAW [RECOM]

20 Watt Single & Dual Output;
RP20-4812DAW
型号: RP20-4812DAW
厂家: RECOM INTERNATIONAL POWER    RECOM INTERNATIONAL POWER
描述:

20 Watt Single & Dual Output

文件: 总7页 (文件大小:472K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
• Wide 4:1 Input Voltage Range  
• 1.6kVDC Isolation  
• UL Certified  
Features  
DC/DC Converter  
• Efficiency up to 90%  
• Six-Sided Continuous Shield  
• No Minimum Load  
Regulated  
Converters  
RP20-AW  
20 Watt  
Single &  
Description  
The RP20-AW series are ultraminiature wide input voltage range power DC/DC converters in a case  
half the size of industry standard 20W converters. Despite their small size, the RP20-AW converters are  
fully specified devices with output currents up to 4.5 Amps, up to 90% efficiency, no minimum load,  
1600VDC isolation, a built-in Class A EMC filter and low ripple/noise figures. The outputs are also fully  
protected against short circuits, overcurrent and overvoltage. The no load input current is particularly  
low (only 4mA/6mA). The RP20-AW series will find many uses in applications where board space and/  
or board height is at a premium or in battery-powered systems where standby current is important.  
Dual Output  
Selection Guide  
Part Number  
Input  
Output  
Output  
Current  
[mA]  
Input(1) Efficiency(1) Max. Capacitive  
Voltage Range Voltage  
Current  
[mA]  
typ.  
[%]  
Load(2)  
[µF]  
[VDC]  
9-36  
9-36  
9-36  
9-36  
18-75  
18-75  
18-75  
18-75  
9-36  
9-36  
18-75  
18-75  
[VDC]  
3.3  
5
12  
15  
3.3  
5
12  
15  
12  
15  
12  
15  
RP20-243.3SAW(3,4)  
RP20-2405SAW(3,4)  
RP20-2412SAW(3,4)  
RP20-2415SAW(3,4)  
RP20-483.3SAW(3,4)  
RP20-4805SAW(3,4)  
RP20-4812SAW(3,4)  
RP20-4815SAW(3,4)  
RP20-2412DAW(3,4)  
RP20-2415DAW(3,4)  
RP20-4812DAW(3,4)  
RP20-4815DAW(3,4)  
4500  
4000  
1670  
1330  
4500  
4000  
1670  
1330  
833  
695  
936  
938  
934  
356  
468  
469  
462  
936  
926  
468  
463  
89  
89  
89  
89  
87  
89  
89  
90  
89  
90  
89  
90  
7000  
5000  
850  
700  
7000  
5000  
850  
700  
500  
350  
500  
350  
667  
833  
667  
E196683  
UL60950-1 Certified  
Notes:  
Note1: Values at nominal input voltage and full load  
Note2: Test by minimum Vin and constant resistor load.  
Model Numbering  
RP20-__ __ _AW/_ _  
Package(5)  
Input Voltage  
Control Logic(4)  
Output Voltage  
Single or Dual  
Ordering Examples  
RP20-2405SAW/P = 24V 4:1 Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted.  
RP20-483.3SAW-HC = 48V 4:1 Input, 3.3V Output, Premounted Heat-sink, no Trim or CTRL pins.  
(trim function is only available for single output with /P or /N suffix)  
Notes:  
Note3: standard part is without suffixes CTRL & Trim pin aren’t fitted  
add suffix “P” for CTRL function with positive logic (1=ON, 0=OFF), including trim pin  
add suffix “N” for CTRL function with negative logic (0=ON, 1=OFF), including trim pin  
Note4: add suffix -HC for premounted Heat-sink and clips  
www.recom-power.com  
REV.: 2/2017  
PD-1  
RP20-AW  
DC/DC Converter  
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted  
Series  
BASIC CHARACTERISTICS  
Parameter  
Condition  
Min.  
Typ.  
Max.  
nom. Vin = 24V  
nom. Vin = 48V  
9VDC  
18VDc  
24VDC  
48VDC  
36VDC  
75VDC  
Input Voltage Range  
DC-DC ON  
DC-DC OFF  
9VDC  
Vin = 24V  
Vin = 48V  
8VDC  
Under Voltage Lockout (UVLO)  
DC-DC ON  
DC-DC OFF  
18VDC  
16VDC  
Input Filter  
Pi-Type  
Input Reflected Ripple Current(5)  
nominal Vin and full load  
30mAp-p  
Vin = 24V, 100ms max.  
Vin = 48V, 100ms max.  
50VDC  
100VDC  
Input Surge Voltage  
Start-up time  
Power up  
Remote ON/OFF  
30ms  
30ms  
3.3Vout, 5Vout  
Others  
248kHz  
297kHz  
275kHz  
330kHz  
303kHz  
363kHz  
Operating Frequency Range  
Minimum Load  
0%  
measured by 20Mhz bandwidth  
with 1µF M/C X7R and a 10µF T/C  
Single  
75mVp-p  
Ripple and Noise  
measured by 20Mhz bandwidth  
with 1µF M/C X7R and 10µF T/C for Dual  
each output  
100mVp-p  
DC-DC ON  
DC-DC OFF  
Open or 3.0V < Vr < 15V  
Short or 0V < Vr < 1.2V  
Positive Logic  
Negative Logic  
Remote ON/OFF(6)  
DC-DC ON  
DC-DC OFF  
Short or 0V < Vr < 1.2V  
Open or 3.0V < Vr < 15V  
Negative Logic DC-DC OFF  
Positive Logic DC-DC ON  
2mA  
Input current of Remote pin (CTRL)  
-0.5mA  
1mA  
Notes:  
Note5: Simulated source impedance of 12µH. 12µH inductor in series with +Vin.  
RP20-2405SAW  
Efficiency vs. Output Current  
Efficiency vs. Input Voltage  
95  
90  
85  
80  
75  
70  
65  
60  
55  
50  
45  
40  
95  
90  
85  
80  
75  
70  
65  
9Vin  
24Vin  
36Vin  
9
12  
15  
18  
21  
24  
27  
30  
33  
36  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
Input Voltage [VDC]  
Output Current [%]  
continued on next page  
PD-2  
REV.: 2/2017  
www.recom-power.com  
RP20-AW  
DC/DC Converter  
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted  
Series  
RP20-4805SAW  
Efficiency vs. Output Current  
Efficiency vs. Input Voltage  
95  
95  
90  
85  
80  
75  
70  
65  
90  
85  
80  
75  
70  
65  
60  
55  
36Vin  
48Vin  
75Vin  
50  
45  
40  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
18  
24  
30  
36  
42  
48  
54  
60  
66  
72  
75  
Output Current [%]  
Input Voltage [VDC]  
REGULATIONS  
Parameter  
Condition  
Value  
Output Voltage Accuracy  
1%  
Output Trimming  
Single  
10%  
Single  
Dual  
0.2%  
0.5%  
Line Voltage Regulation  
Single  
Dual  
0.2%  
1.0%  
0% load to 100% load  
10% load to 100% load  
Load Voltage Regulation  
Cross Regulation  
Single  
Dual  
0.1%  
0.8%  
asymmetrical 25%<>100% load  
25% load step change  
5%  
Transient Response recovery time  
250µs typ.  
External Output Trimming  
Output Voltage Trimming  
Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external  
trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these  
trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resistor  
required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below.  
Trim up  
Trim down  
6
5
4
R
U
R
D
5
RP20-xx3.3SAW  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
%
3.333  
57.93  
3.366  
26.16  
3.399  
15.58  
3.432  
10.28  
3.465  
7.11  
3.498  
4.99  
3.531  
3.48  
3.564  
2.34  
3.597  
1.46  
3.63  
0.75  
Volts  
kOhms  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
%
3.267  
69.47  
3.234  
31.23  
3.201  
18.49  
3.168  
12.12  
3.135  
8.29  
3.102  
5.74  
3.069  
3.92  
3.036  
2.56  
3.003  
1.50  
2.97  
0.65  
Volts  
kOhms  
continued on next page  
REV.: 2/2017  
www.recom-power.com  
PD-3  
RP20-AW  
DC/DC Converter  
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted  
Series  
RP20-xx05SAW  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
%
5.05  
36.57  
5.10  
16.58  
5.15  
9.92  
5.20  
6.58  
5.25  
4.59  
5.30  
3.25  
5.35  
2.30  
5.4  
1.59  
5.45  
1.03  
5.50  
0.59  
Volts  
kOhms  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
%
4.95  
45.53  
4.90  
20.61  
4.85  
12.31  
4.80  
8.15  
4.75  
5.66  
4.70  
4.00  
4.65  
2.81  
4.60  
1.92  
4.55  
1.23  
4.50  
0.68  
Volts  
kOhms  
RP20-xx12SAW  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
%
12.12  
12.24  
165.95  
12.36  
98.64  
12.48  
64.98  
12.60  
44.78  
12.72  
31.32  
12.84  
21.70  
12.96  
14.49  
13.08  
8.88  
13.20  
4.39  
Volts  
kOhms  
367.91  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
%
11.88  
460.99  
11.76  
207.95  
11.64  
123.60  
11.52  
81.42  
11.40  
56.12  
11.28  
39.25  
11.16  
27.20  
11.04  
18.16  
10.92  
11.13  
10.8  
5.51  
Volts  
kOhms  
RP20-xx15SAW  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
%
15.15  
15.3  
15.45  
106.06  
15.60  
68.80  
15.75  
46.44  
15.90  
31.53  
16.05  
20.88  
16.20  
12.90  
16.35  
6.69  
16.50  
1.72  
Volts  
kOhms  
404.18  
180.59  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
%
14.85  
499.82  
14.70  
223.41  
14.55  
131.27  
14.40  
85.20  
14.25  
57.56  
14.10  
39.14  
13.95  
25.97  
13.80  
16.10  
13.65  
8.42  
13.50  
2.282  
Volts  
kOhms  
PROTECTIONS  
Parameter  
Condition  
Value  
Short Circuit Protection (SCP)  
continuous, automatic recovery  
3.3Vout  
5Vout  
12Vout  
15Vout  
3.7VDC - 5.4VDC  
5.6VDC - 7.0VDC  
13.5VDC - 19.6VDC  
16.8VDC - 20.5VDC  
Over Voltage Protection (OVP)  
Zener Diode Clamp  
Over Load Protection (OLP)  
Isolation Voltage  
% of Iout rated; Hiccup mode  
150% typ  
I/P to O/P  
I/P to O/P to case  
500 VDC  
1.6kVDC/1 minute  
1.0kVDC/1 minute  
Isolation Resistance  
Isolation Capacitance  
1Gmin  
1500pF max.  
Notes:  
Note7: This power module is not internally fused. An input line fuse must always be used.  
PD-4  
REV.: 2/2017  
www.recom-power.com  
RP20-AW  
DC/DC Converter  
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted  
Series  
ENVIRONMENTAL  
Parameter  
Condition  
Value  
without derating  
with derating  
-40°C to +68°C  
-40°C to +101°C  
Operating Temperature Range  
Maximum Case Temperature  
Temperature Coefficient  
+105°C  
0.02%/°C max.  
Natural convection  
Natural convection with Heat Sink  
17.6°C/Watt  
14.8°C/Watt  
Thermal Impedance  
Operating Humidity  
Thermal Shock  
Vibration  
5% - 95% RH  
MIL-STD-810F  
MIL-STD-810F  
Bellcore TR-NWT-000332  
MIL-HDBK-217F  
1766 x 103 hours  
1469 x 103 hours  
MTBF(8)  
Derating Graph(9)  
RP20-4815SAW  
RP20-4815SAW with Heat-sink  
100  
80  
100  
80  
60  
60  
40  
40  
20  
10  
20  
10  
0
0
-40 -20  
0
20 40  
60  
80 100 120  
-40 -20  
0
20 40  
60  
80 101 120  
97  
73  
Ambient Temperatu6r8e [°C9]4101  
Ambient Temperature [°C]  
Notes:  
Note8: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C.  
MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground, Benign, controlled environment).  
Note9: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-  
number not shown here please contact our technical support service at techsupportAT@recom-power.com.  
SAFETY AND CERTIFICATIONS  
Certificate Type (Safety)  
Condition  
Standard  
UL60950-1 1st Ed.: 2003  
C22.2 No. 60950 1st. Ed.: 2003  
UL General Safety  
E196683  
EMC Compliance  
EMI Standard(10)  
Condition  
with external filter  
Standard / Criterion  
EN55022, Class A or B  
ESD  
Air 8kV and Contact 6kC  
EN61000-4-2, Criteria A  
EN61000-4-3, Criteria A  
EN61000-4-4, Criteria A  
EN61000-4-5, Criteria A  
EN61000-4-6, Criteria A  
Radiated Immunity  
Fast Transient(11)  
Surge(11)  
10 V/m  
2kV  
2kV  
Conducted Immunity  
10 Vr.m.s  
Notes:  
Note10: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below.  
Note11: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom  
suggests: Nippon chemi-con KY series, 220µF/100V.  
continued on next page  
www.recom-power.com  
REV.: 2/2017  
PD-5  
RP20-AW  
DC/DC Converter  
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted  
Series  
EMI Filtering Class B  
C5  
C5  
L1  
L1  
Fuse  
Fuse  
+V  
OUT  
+V  
OUT  
+V  
+V  
IN  
IN  
Input  
Input  
DC  
DC  
C3  
C1  
C2  
C1  
C2  
C3  
COM  
DC  
DC  
-V  
-V  
OUT  
OUT  
-V  
-V  
IN  
IN  
C4  
C4  
MODEL  
C1  
C2  
C3  
C4/C5  
L1  
CMC: 325µH  
ref.: WE 744290321  
ref.: CMC-06  
RP20-24xxSAW  
RP20-24xxDAW  
4.7µF/25V  
1812 MLCC  
470pF/2kV  
1808 MLCC  
N/A  
N/A  
CMC: 325µH  
ref.: WE 744290321  
ref.: CMC-06  
RP20-48xxSAW  
RP20-48xxDAW  
2.2µF/100V  
1812 MLCC  
2.2µF/100V  
1812 MLCC  
2.2µF/100V  
1812 MLCC  
470pF/2kV  
1808 MLCC  
DIMENSIONS and PHYSICAL CHARACTERISTICS  
Parameter  
Type  
Value  
Case  
Base  
Nickel coated copper  
FR4 PCB  
Material  
Potting  
Silicone (UL94-V0)  
without Heat-sink  
with Heat-sink  
25.4 x 25.4 x 9.9mm  
31.4 x 25.4x 16.5mm  
Package Dimensions (LxWxH)  
Package Weight  
without Heat-sink  
with Heat-sink  
15g  
21.44g  
Dimension Drawing (mm)  
25.4  
25.4  
Pin Connections  
Single  
/P or /N  
Dual  
Dual  
Pin # Single  
/P or /N  
2.54  
Ø 1.0  
20.32  
1
2
3
4
5
6
+Vin  
-Vin  
+Vin  
+Vin +Vin  
Ø1.60 +0.15/-0  
-Vin  
-Vin  
-Vin  
np pin  
+Vout  
no pin  
-Vout  
CTRL  
+Vout  
Trim  
no pin CTRL  
+Vout +Vout  
Com Com  
-Vout -Vout  
4
6
4
5
6
1
2
1
2
Bottom View  
Standard  
Bottom View  
CTRL Option  
Top View  
-Vout  
Pin Pitch Tolerance 0.25mm  
Pin dimension tolerance 0.1mm  
XX.X 0.5mm  
3
20.32  
2.54  
XX.XX 0.25mm  
continued on next page  
REV.: 2/2017  
PD-6  
www.recom-power.com  
RP20-AW  
DC/DC Converter  
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted  
Series  
Dimension Drawing (mm) with Heat-sink  
24.20  
Top View  
Heat-sink  
2.54  
20.32  
Ø 1.0  
25.4  
25.4  
31.4  
PACKAGING INFORMATION  
Parameter  
Type  
Value  
without Heat-sink Tube  
with Heat-sink Tray  
8pcs.  
20pcs.  
Packaging Quantity  
Storage Temperature Range  
Storage Humidity  
-55°C to +125°C  
5% - 95% RH  
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written  
consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer  
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.  
www.recom-power.com  
REV.: 2/2017  
PD-7  

相关型号:

RP20-4812DAW-HC

20W DC/DC CONV 1"X1" 1.6KV
ETC

RP20-4812DAW/N

20W DC/DC CONV 1"X1" 1.6KV
ETC

RP20-4812DAW/N-HC

20W DC/DC CONV 1"X1" 1.6KV
ETC

RP20-4812DAW/P

20W DC/DC CONV 1"X1" 1.6KV
ETC

RP20-4812DAW/P-HC

20W DC/DC CONV 1"X1" 1.6KV
ETC

RP20-4812DE

20 Watt Single, Dual & Triple Output
RECOM

RP20-4812DEW

20 Watt Single & Dual Output
RECOM

RP20-4812DF

20 Watt 2inch x 1inch Package Single & Dual Output
RECOM

RP20-4812DF-HC

CONV DC/DC 20W 36-75VIN +/-12V
ETC

RP20-4812DF/N

DC DC CONVERTER +/-12V 20W
ETC

RP20-4812DF/N-HC

CONV DC/DC 20W 36-75VIN +/-12V
ETC

RP20-4812DFN

20 Watt 2” x 1” Package Single & Dual Output
RECOM