SU3 [RECTRON]
SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 50 to 200 Volts CURRENT 1.0 Ampere; 表面安装玻璃钝化超快速硅整流电压范围50到200伏特电流1.0安培
| 型号： | SU3 |
| 厂家： | 
RECTRON SEMICONDUCTOR |
| 描述： | SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 50 to 200 Volts CURRENT 1.0 Ampere |
| 文件： | 总5页 (文件大小：390K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SU1
THRU
SU4
SURFACE MOUNT GLASS PASSIVATED
SUPER FAST SILICON RECTIFIER
VOLTAGE RANGE 50 to 200 Volts CURRENT 1.0 Ampere
FEATURES
* Glass passivated device
* For surface mounted applications
* Ultrafast recovery times dor high efficiency
* Low forward voltage, low power loss
* Low leakage current
SOD-123F
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* Metallurgically bonded construction
* Mounting position: Any
.114 (2.9)
.106 (2.7)
* Weight: 0.016 gram
.077 (1.95)
.035 (0.90)
.028 (0.70)
.069 (1.75)
.008 (0.20)
.053 (1.35)
.047 (1.20)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.030 (0.75)
.022 (0.55)
.150 (3.8)
.142 (3.6)
Dimensions in inches and (millimeters)
O
MAXIMUM RATINGS (@ T
A
=25 C unless otherwise noted)
SYMBOL
SU1
50
SU2
100
70
SU3
150
105
150
SU4
200
140
UNITS
Volts
Volts
Volts
RATINGS
VRRM
VRMS
VDC
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
35
50
100
Maximum DC Blocking Voltage
200
Maximum Average Forward Rectified Current
IO
1.0
20
Amps
Amps
O
at T = 55 C
A
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
Typical Thermal Resistance (Note 1)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating Temperature Range
R
R
120
20
0C/W
0C/W
pF
θ
θ
J A
J L
CJ
TJ
18
0 C
150
Storage Temperature Range
TSTG
-55 to + 150
0 C
O
ELECTRICAL CHARACTERISTICS(@T
A
=25 C unless otherwise noted)
CHARACTERISTICS
SYMBOL
VF
SU1
SU2
SU3
SU4
UNITS
Volts
µA
Maximum Instantaneous Forward Voltage at 1.0A DC
0.95
5
@TA = 25oC
Maximum Average Reverse Current
IR
at Rated DC Blocking Voltage
@TA = 100oC
350
µA
Maximum Reverse Recovery Time (Note 4)
20
nSec
trr
2006-12
NOTES : 1. Thermal Resistance :Mounted on PCB.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant","100% Sn plating (Pb-free)".
4. Test Conditions: I = 0.5A, I = -1.0A, I = -0.25A.
RR
F
R
RATING AND CHARACTERISTICS CURVES ( SU1 THRU SU4 )
trr
+0.5A
50 Ω
NONINDUCTIVE
10 Ω
NONINDUCTIVE
( - )
PULSE
GENERATOR
(NOTE 2)
D.U.T
0
( + )
25 Vdc
(approx)
( - )
-0.25A
1
( + )
OSCILLOSCOPE
(NOTE 1)
NON-
INDUCTIVE
NOTES: 1 Rise Time = 7ns max. Input Impedance =
1 megohm. 22pF.
-1.0A
2. Rise Time = 10ns max. Source Impedance =
50 ohms.
1cm
SET TIME BASE FOR 8/1 ns/cm
FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
1.0
0.8
1000
T
= 100 OC
A
100
10
0.6
0.4
T
= 75 OC
A
T
= 25 OC
A
Single Phase
Half Wave 60Hz
Resistive or
1.0
0.1
0.2
0
Inductive Load
0
25
50
75
100
125
150
175
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE, (OC)
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.2 TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.3 TYPICAL REVERSE
CHARACTERISTICS
RATING AND CHARACTERISTICS CURVES ( SU1 THRU SU4 )
20
10
20
10
8.3ms Single Half Sine-Wave
(JEDED Method)
T
= 25 OC
J
3.0
1.0
5
0.3
0.1
3
2
0.03
0.01
Pulse Width=300uS
1% Duty Cycle
1
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
1
5
10
50
100
INSTANTANEOUS FORWARD VOLTAGE, (V)
NUMBER OF CYCLES AT 60Hz
FIG.4 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
200
100
T
= 25 OC
J
60
40
20
10
6
4
2
1
0.1 0.2
0.4
1.0
2
4
10
20
40
100
REVERSE VOLTAGE, (V)
FIG.6 TYPICAL JUNCTION CAPACITANCE
Mounting Pad Layout
0.030 MIN.
(0.75 MIN.)
0.035MIN.
(0.90 MIN.)
0.165
(4.19) REF
Dimensions in inches and (millimeters)
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
相关型号：
©2020 ICPDF网 联系我们和版权申明