E2-MIX24882-D [REDLION]
Ethernet I/O Modules;
| 型号： | E2-MIX24882-D |
| 厂家： | 
Red Lion Controls. Inc |
| 描述： | Ethernet I/O Modules |
| 文件： | 总4页 (文件大小：1290K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EtherTRAK®-2 Ethernet I/O Modules
Sixnet Automation Series
Ethernet I/O Modules
Sixnet’s EtherTRAK®-2 Ethernet I/O modules provide a simple and secure way to reliably monitor
remote sites located in harsh environments. Offering the lowest cost per I/O point and rugged
environmental ratings, EtherTRAK-2 modules are ideal for both control rooms and extreme locations
across industries that include oil & gas, power & energy, transportation, mining, maritime and water/
wastewater.
Our compact DIN-rail modules support open-standard protocols to provide flexible communication
options for existing or newly installed Ethernet networks. By seamlessly replacing external devices such
as switches, data concentrators and protocol converters, EtherTRAK-2 modules transcend simple I/O
capabilities to cost-effectively streamline systems and improve reliability.
PRODUCT HIGHLIGHTS
Flexible mix of I/O channels support
•
all instrumentation needs
Real-Time Ring™ for fast redundancy
Control
Center
•
Dual independent Ethernet ports
•
enable flexible networking
Built-in security proactively blocks
•
unwanted access
IPm
Controller
IPm
Controller
Extensive health diagnostics and
•
reporting reduce downtime
Service
Room
Ring
Switch
Ring
Standard Modbus protocols provide
•
Switch
universal compatibility
Rugged design supports extreme
•
temperatures and hazardous
locations
Real-Time
Ring
APPLICATIONS
EtherTRAK-2
I/O Modules
EtherTRAK-2
I/O Modules
Oil & Gas
•
Power & Energy
•
- Transmission
- Distribution
Pump
Room
Engine
Room
Transportation
•
Mining
•
Maritime
•
Water/Wastewater
•
Off-Shore Oil Rig
EtherTRAK®-2 Ethernet I/O Module Specifications
FEATURES & BENEFITS
INDUSTRIAL AUTOMATION
Sixnet’s rugged RTUs and I/O
Configuration Maintenance & Monitoring
High-Performance, Flexible I/O
provide a simple yet powerful
•ꢀ Deliversꢀcross-platformꢀconfiguration
• Offers easy-to-use software tools
– Configuration and monitoring via standard
web browser
• Provides high-speed functionality
• Lowers overall cost per I/O point
– Flexible mix of up to 34 I/O supports
DI, DO, AI, AO, temperature (RTD and
thermocouples)
means to reliably monitor and
control remote sites around the
clock in the harshest environments.
Our compact automation systems
can start small and grow as needs
increase without requiring hardware
replacement. Virtually unlimited
scalability means organizations have
fewer restrictions on the number
of remote sites or devices that are
supported. “Best of both worlds”
programming combines Windows
ease of use with the future-proof
security of an embedded Linux OS.
– On-board storage for project
documentation
– High resolution 16-bit analog or high-speed
10-bit analog
– Project-based software tools
– User-based history tracks changes
– Per-channel calibration
– Fast I/O polling of up to 1mS
– Advanced counter functions with 32-bit
reporting
– Configuration archiving
– Module hot-swap capabilities
– Time proportioned outputs simplify high-
speed pulse rate functions
Rugged, Compact Design
Built-In Security
• Supports harsh environments
•ꢀ Deliversꢀprovenꢀreliability
• Prevents unwanted intrusion
• Guards against unauthorized users
– User-assigned permissions
– Firewall protection
– Industrial -40 to 75°C operating range
– UL/CSA (CUL), FCC and CE rated
– Hazardous locations rated for Class I,
Div 2 (Zone 2) areas
Flexible, Redundant Networking
– Vibration resistant IEC60068-2-6
– Self-resetting fuses protect I/O
•ꢀ SimplifiesꢀconnectivityꢀbyꢀreplacingꢀEthernetꢀ
switches
Watchdog Monitoring & Reporting
•ꢀ Ensuresꢀreliabilityꢀwithoutꢀadditionalꢀcost
– Real-Time Ring switch mode for fast
redundancy
• Provides health reports of various module
functions
• Reduces maintenance downtime
– CPU health
– Switch elimination mode enables daisy-
chaining
– Dual-power status
– Communication activity
– PoE status
– Dual independent Ethernet ports
– Ethernet, RS-485 and USB connections
– Optional Power over Ethernet (PoE)
– Embedded data concentrator
– Port link status
NETWORKING OPTIONS
Break in Cable
Active Data Path
Real-Time Ring Switch Mode
Create redundant Ethernet reliability
without additional cost
Backup Data Path
Switch Elimination Mode
Daisy-chain modules without external
switches to save money and simplify
connectivity
LAN A LAN B
Two Networks Mode
Each Ethernet port has a unique MAC
and IP address for connection to two
independent physical networks
EtherTRAK®-2 Ethernet I/O Module Specifications
SPECIFICATIONS
Discrete Input Channels
•
•
•
•
Voltage range: 10–30 VDC or 60–140 VAC
Input isolation: 150 volts (16 channel modules only)
Input resistance: 10 Kohms
General I/O Performance
• Power supply voltage: 10-30 VDC
Slow response (software configurable): 25 mS (20 Hz. maximum
counting rate)
Fastest response (software configurable): 1 mS (400 Hz. maximum
counting rate)
• Input current requirement: 100 mA @ 24 VDC typical with no loads
• PoE power (EB modules only): 10 watts at 60°C for user loads
• De-rate: up to 5 watts at 75°C
•
• I/O: 512 discrete inputs and outputs plus 256 analog input and
output registers
•
•
•
Special fast counting rate: up to 50 KHz on channels 1 and 2
Count up: pulse timing and pulse rate 16 or 32-bit reporting
Refer to user manual for additional specifications
• Unique station addresses: 16,000+ (Sixnet or 247 Modbus)
Ethernet Performance
Discrete Output Channels
• Ethernet ports: 10/100BaseTx (auto-detecting)
• Connection: RJ45 (auto-crossover)
• Output voltage range: 10-30 VDC or 10-30VDC/AC
• Maximum output power: up to 1A per channel
• Short circuit protection: self-reset fuses (trip above 1.5 Amp)
• Input isolation: 150 volts (16 channel modules only)
• All channels scan rate: 1 mS
• Isolation: 1500 volts RMS 1 minute (60 Hz.)
• Message response time: <1 mS per message
• Diagnostic LEDs: solid indicates link, blinking indicates activity
• Protocol support: TCP/IP, ARP, UDP, ICMP, DHCP, HTTP, Modbus
UDP/TCP slave mode, Modbus UDP master mode, Sixnet UDR UDP/
TCP slave mode, Sixnet UDR UDP master mode
• Refer to user manual for additional specifications
Web Interface
• Real-Time Ring: 5ms per hop recovery time
• Secure web access with password protection for multiple users
• 1 simultaneous user
• Independent networks: 1 or 2 with unique MAC and IP addres
• 750K memory for user pages (more with special order)
Serial Ports
Environmental
• RS-485 port: screw terminals (485+, 485-, GND; 2-wire half-
duplex, not isolated)
• Operating temperature: -40 to 75°C (-40 to 85°C storage)
• Humidity: 5 to 95% RH (non-condensing; optional conformal
coating)
• RS-485 networking: up to 32 (full load) stations
• RS-485 distance: up to 0.5 miles (baud-rate dependent)
• Baud rates: from 300 to 57,600 baud
• Flammability: UL 94V-0 materials
• Vibration: IEC60068-2-6
• Protocols: master and slave; Sixnet and Modbus RTU/ASCII
• Diagnostic LEDs: transmit (TD) and receive (RD)
• Shock: IEC60068-2-27
Analog Output Channels
Standards Compliance
• Analog output range: 4-20 mA
• Electrical safety : UL 508, CSA C22.2/142; EN61010-1; CE
• EMI emissions: FCC part 15, ICES-003, Class A; EN55022;
IEC6100-6-4; CE
• D/A resolution: 16 bits (less than 1 uA)
• Full scale accuracy: +/-0.02% (at 20°C)
• Span and offset temperature: +/- 50 ppm per °C
• Load resistance (@ 24 V): 0-750 Ohms
• Current limiting short circuit protection
• Refer to user manual for additional specifications
• EMC immunity : IEC61000-6-2 (EN61000-4-2,3,4, 5, 6, 8); CE
• Hazardous locations: Class 1, Div 2, Groups A, B, C, D; ISA12.12.01;
CSA C22.2/213; ATEX (Zone 2) IEC60079-0,-15
• Marine and offshore: tested and/or verified to meet various
standards such as ABS, DNV No. 2.4, and Lloyds
Analog Input Channels
Physical
• Input range: 4-20mA, 0-10VDC, RTD, thermocouple and 250mV
• A/D resolution: 16 bits (0.003%); 10 bits (1mS fast option)
• Input impedance (resistance): 100 ohms or 200 Kohms
• Fuses: self-resetting short circuit protection (4-20 mA inputs)
• DMRR (differential mode): 66 db at 50/60 Hz
• Mounting: DIN rail (EN50022), direct to panel or flat panel
• Packaging: impact resistant Lexan® polycarbonate
• Dimensions (module and base): 5.5”L x 3.5”W x 5.1”H (14cm x
8.9cm x 13cm)
• Update time: from 880 mS to 1 mS (depending configuration)
Warranty
°
• Temperature accuracy: typical uncalibrated +/-0.5 C
•
RTD type: 100 Ohm platinum
• RTD alpha: 0.00385 or 0.00392
RTD connections: 2 or 3-wire
• 2 years on design and manufacturing defects
•
°
RTD input range: -200 to 850 C
•
All specifications are subject to change. Contact Sixnet to learn more.
• Refer to user manual for additional specifications
EtherTRAK®-2 Ethernet I/O Module Specifications
ORDER GUIDE
PART NUMBER
DI
24
24
20
DO
AI
AO
DESCRIPTION
E2 or EB-MIX24880-D
E2 or EB-MIX24882-D
E2-MIX20884-D
8
8
32 channel combination I/O with 1 isolated input counter
8
8
2
34 channel combination I/O with 2 analog outputs
8
8
4
32 channel combination I/O with 4 analog outputs and 4 isolated
input counters
E2 or EB-32DI24-D
E2 or EB-16DI24-D
E2-16DIAC-D
32
16
16
32 discrete inputs (10-30 VDC) including 16 multifunction counters
16 individually isolated discrete inputs (10-30 VDC) with counters
16 individually isolated discrete inputs (120 VAC nominal; 10-30
VDC) with counters
E2 or EB-32DO24-D
32
32 discrete outputs (10-30 VDC) 0.5 Amp each, 8 Amps total
E2 or EB-16DO24-D
16
16 individually isolated discrete ouputs (10-30VDC) 1 Amp outputs,
16 Amps total
E2-16DORLY
16
16 individually isolated discrete outputs (10-30VDC/VAC relay) 1
Amp outputs, 16 Amps total
E2 or EB-32AI20M-D
E2 or EB-32AI10V-D
E2 or EB-16AI20M-D
E2 or EB-8AO20M-D
E2 or EB-16AI-8AO-D
32
32
16
32 analog inputs (4-20 mA) with 16-bit accuracy
32 analog inputs (0-10VDC)
16 analog inputs (4-20 mA)
8
8 analog outputs (4-20 mA)
16
8
24 channel combination, 16 analog inputs (4-20 mA) and 8 analog
outputs (4-20 mA)
E2 or EB-16ISOTC-D
16TC
16 individually isolated analog inputs (thermocouple and
+/- 250 mV) with J, K, E, R, T, C, N, S
E2 or EB-16ISO20M-D
16
16 individually isolated analgo inputs (4-20 mA)
E2 or EB-10RTD-D
10RTD
10 analog inputs (100 Ohm platinum RTD), rang is -200 to 850°C
MECHANICAL DRAWING
As the global experts in communication, monitoring and control for
Americas
industrial automation and networking, Red Lion has been delivering
innovative solutions for over forty years. Our award-winning
technology enables companies worldwide to gain real-time data
visibility that drives productivity. Product brands include Red Lion,
N-Tron and Sixnet. With headquarters in York, Pennsylvania, the
company has offices across the Americas, Asia-Pacific and Europe.
For more information, please visit www.redlion.net. Red Lion is a
Spectris company.
sales@redlion.net
Asia-Pacific
asia@redlion.net
Europe
Middle East
Africa
w w w . r e d l i o n . n e t
europe@redlion.net
Connect. Monitor. Control.
ADLD0181 122313 © 2013 Red Lion Controls
+1 (717) 767-6511
相关型号：
©2020 ICPDF网 联系我们和版权申明