ACS05K/SAMPLE-03 [RENESAS]
AC SERIES, HEX 1-INPUT INVERT GATE, CDFP14;型号: | ACS05K/SAMPLE-03 |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | AC SERIES, HEX 1-INPUT INVERT GATE, CDFP14 CD 输入元件 逻辑集成电路 |
文件: | 总2页 (文件大小:52K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ACS05MS
Data Sheet
November 1998
File Number 4542
Radiation Hardened Hex Inverter with
Open Drain Outputs
Features
• QML Qualified Per MIL-PRF-38535 Requirements
• 1.25 Micron Radiation Hardened SOS CMOS
The Radiation Hardened ACS05MS is a Hex Inverter with
open drain outputs. This device inverts a HIGH level on each
input to a LOW level on the corresponding Y output. A LOW
level on the input causes the corresponding Y output to enter
a high impedance state, which can be pulled HIGH through a
• Radiation Environment
- Latch-Up Free Under any Conditions
5
- Total Dose. . . . . . . . . . . . . . . . . . . . . . 3 x 10 RAD (Si)
-10
resistor to V . All inputs are buffered and the outputs are
- SEU Immunity. . . . . . . . . . . . <1 x 10
Errors/Bit/Day
2
CC
designed for balanced propagation delay and transition times.
- SEU LET Threshold . . . . . . . . . . . >100MeV/(mg/cm )
The ACS05MS is fabricated on a CMOS Silicon on Sapphire
(SOS) process, which provides an immunity to Single Event
Latch-up and the capability of highly reliable performance in
any radiation environment. These devices offer significant
power reduction and faster performance when compared to
ALSTTL types.
• Input Logic Levels. . . . V = (0.3)(V ), V = (0.7)(V
)
IL CC IH CC
• Output Current . . . . . . . . . . . . . . . . . . . . . . . . ±8mA (Min)
• Quiescent Supply Current . . . . . . . . . . . . . . 100µA (Max)
• Propagation Delay . . . . . . . . . . . . . . . . . . . . . 20ns (Max)
Applications
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed below must be used when ordering.
• High Speed Control Circuits
• Sensor Monitoring
Detailed Electrical Specifications for the ACS05MS are
contained in SMD 5962-98602. A “hot-link” is provided
on our homepage with instructions for downloading.
www.intersil.com/data/sm/index.asp
• Low Power Designs
Ordering Information
o
ORDERING NUMBER
5962F9860201VCC
INTERNAL MKT. NUMBER
ACS05DMSR-03
TEMP. RANGE ( C)
PACKAGE
14 Ld SBDIP
DESIGNATOR
CDIP2-T14
CDIP2-T14
CDFP4-F14
CDFP4-F14
N/A
-55 to 125
ACS05D/SAMPLE-03
5962F9860201VXC
ACS05K/SAMPLE-03
5962F9860201V9A
ACS05D/SAMPLE-03
ACS05KMSR-03
25
-55 to 125
25
14 Ld SBDIP
14 Ld Flatpack
14 Ld Flatpack
Die
ACS05K/SAMPLE-03
ACS05HMSR-03
25
Pinouts
ACS05MS
ACS05MS
(SBDIP)
(FLATPACK)
TOP VIEW
TOP VIEW
A1
Y1
1
2
3
4
5
6
7
14
V
CC
A1
Y1
1
2
3
4
5
6
7
14 V
CC
13
12
11
10
9
A6
Y6
A5
Y5
A4
Y4
13 A6
12 Y6
11 A5
10 Y5
A2
A2
Y2
Y2
A3
Y3
A3
GND
8
Y3
9
8
A4
Y4
GND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
ACS05MS
PASSIVATION:
Die Characteristics
Type: Phosphorous Silicon Glass (PSG)
Thickness: 1.30µm ±0.15µm
DIE DIMENSIONS:
Size: 2390µm x 2390µm (94 mils x 94 mils)
Thickness: 525µm ±25µm (20.6 mils ±1 mil)
Bond Pad: 110µm x 110µm (4.3 x 4.3 mils)
SPECIAL INSTRUCTIONS:
Bond V
First
ADDITIONAL INFORMATION:
CC
METALLIZATION:
5
2
Metal 1 Thickness: 0.7µm ±0.1µm
Metal 2 Thickness: 1.0µm ±0.1µm
Worst Case Current Density: <2.0 x 10 A/cm
Transistor Count: 46
SUBSTRATE POTENTIAL
Unbiased Insulator
Metallization Mask Layout
ACS05MS
Y1
(2)
A1
(1)
V
(14)
A6
(13)
CC
A2 (3)
(12) Y6
(11) A5
NC
Y2 (4)
NC
A3 (5)
(10) Y5
(6)
Y3
(7)
GND
(8)
Y4
(9)
A4
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
Sales Office Headquarters
NORTH AMERICA
EUROPE
ASIA
Intersil Corporation
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: (32) 2.724.2111
FAX: (32) 2.724.22.05
Intersil (Taiwan) Ltd.
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: (886) 2 2716 9310
FAX: (886) 2 2715 3029
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: (321) 724-7000
FAX: (321) 724-7240
2
相关型号:
©2020 ICPDF网 联系我们和版权申明