EL6830CL-T13 [RENESAS]
Interface Circuit;型号: | EL6830CL-T13 |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | Interface Circuit |
文件: | 总2页 (文件大小:120K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EL6830
®
Data Sheet
July 15, 2004
FN7399.1
PRELIMINARY
Dual Laser Driver
Features
• “Shrink-small” outline package
The EL6830 is a combination read +
2 write level laser driver with an extra
• Voltage-controlled output current source requiring one
external set resistor per channel
read + oscillator ROM channel for
use in dual-laser ‘combo’ drivers. A separate (amplitude and
frequency) oscillator modulates the selected output for laser
noise reduction during read or write. All these functions are
provided in a 16-pin QSOP package.
• Current-controlled output current source
• CH2 to 300mA max
• CH3 to 150mA max
The CD pin, when high, selects the CD (write) laser. Positive
• Rise time = 0.8ns
current supplied to the I lines, through a user-selected
IN
resistor, allows the full scale range of each amplifier to be
matched to the full scale range of the users control DACs.
When the write laser is selected, and the WEN pins are
switched low, the respective current is summed to the output
with 1ns rise and fall times. Write channel 2 has 300mA
output capability with a 300X gain amplifier.
• Fall time = 0.8ns
• On-chip oscillator with frequency and amplitude control by
use of external resistors to ground
• Oscillator to 600MHz
• Oscillator to 100mA pk/pk
• Single +5V supply (±10%)
The 100mA
(max) oscillator is switched on and off
P-P
automatically when WEN2 and WEN3 are pulled high.
• Disable feature for power-up protection and power
savings
The entire chip is powered down when ENABLE is low.
Applications
• Combo CD-RW + DVD-ROM
• CD-RW to 20X
• CD-R to 48X
• Writable optical disk drives
Ordering Information
PART
NUMBER
EL6830CU
PACKAGE
16-Pin QSOP
16-Pin QSOP
TAPE & REEL PKG. DWG. #
-
MDP0040
MDP0040
MDP0040
MDP0046
MDP0046
MDP0046
Get FULL DATASHEET
EL6830CU-T7
7”
EL6830CU-T13 16-Pin QSOP
13”
-
EL6830CL
16-Pin QFN
16-Pin QFN
16-Pin QFN
EL6830CL-T7
EL6830CL-T13
7”
13”
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
1
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
EL6830
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
2
相关型号:
©2020 ICPDF网 联系我们和版权申明