HD64F2134ATF20 [RENESAS]
E6000 Emulator HS2148EPI61H Supplementary Information; E6000仿真器HS2148EPI61H补充信息
| 型号： | HD64F2134ATF20 |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | E6000 Emulator HS2148EPI61H Supplementary Information |
| 文件： | 总39页 (文件大小：416K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
To all our customers
Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and
corporate statement, no changes whatsoever have been made to the contents of the document, and
these changes do not constitute any alteration to the contents of the document itself.
Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
H8S/2148, H8S/2138, H8S/2128 Series,
H8S/2149, H8S/2169, H8/3577, H8/3567 Series
E6000 Emulator HS2148EPI61H
16
Supplementary Information
Renesas Microcomputer Development
Environment System
Rev.1.0 2000.12
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachis or any third partys
patent, copyright, trademark, or other intellectual property rights for information contained in
this document. Hitachi bears no responsibility for problems that may arise with third partys
rights, including intellectual property rights, in connection with use of the information
contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you
have received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability.
However, contact Hitachis sales office before using the product in an application that demands
especially high quality and reliability or where its failure or malfunction may directly threaten
human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power,
combustion control, transportation, traffic, safety equipment or medical equipment for life
support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi
particularly for maximum rating, operating supply voltage range, heat radiation characteristics,
installation conditions and other characteristics. Hitachi bears no responsibility for failure or
damage when used beyond the guaranteed ranges. Even within the guaranteed ranges,
consider normally foreseeable failure rates or failure modes in semiconductor devices and
employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi
product does not cause bodily injury, fire or other consequential damage due to operation of
the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document
without written approval from Hitachi.
7. Contact Hitachis sales office for any questions regarding this document or Hitachi
semiconductor products.
IMPORTANT INFORMATION
READ FIRST
READ this user's manual before using this emulator product.
KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
Emulator Product:
Throughout this document, the term "emulator product" shall be defined as the following
products produced only by Hitachi, Ltd. excluding all subsidiary products.
·
·
·
·
·
Emulator station
User system interface cables
PC interface board
Optional SIMM memory module
E6000 expansion I/O board
The user system or a host computer is not included in this definition.
Purpose of the Emulator Product:
This emulator product is a software and hardware development tool for systems employing the
Hitachi microcomputer H8S/2148, H8S/2138, H8S/2128 series, H8S/2149, H8S/2169, H8/3577,
H8/3567 series (hereafter referred to as the MCU). The emulator product can be used for
systems using other microcomputers by exchanging the evaluation chip. This emulator product
must only be used for the above purpose.
Limited Applications:
This emulator product is not authorized for use in MEDICAL, atomic energy, aeronautical or
space technology applications without consent of the appropriate officer of a Hitachi sales
company. Such use includes, but is not limited to, use in life support systems. Buyers of this
emulator product must notify the relevant Hitachi sales offices before planning to use the product
in such applications.
Improvement Policy:
Hitachi, Ltd. (including its subsidiaries, hereafter collectively referred to as Hitachi) pursues a
policy of continuing improvement in design, performance, and safety of the emulator product.
Hitachi reserves the right to change, wholly or partially, the specifications, design, user's manual,
and other documentation at any time without notice.
I
Target User of the Emulator Product:
This emulator product should only be used by those who have carefully read and thoroughly
understood the information and restrictions contained in the user's manual. Do not attempt to use
the emulator product until you fully understand its mechanism.
It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the emulator product.
II
LIMITED WARRANTY
Hitachi warrants its emulator products to be manufactured in
accordance with published specifications and free from defects in
material and/or workmanship. Hitachi, at its option, will repair or
replace any emulator products returned intact to the factory,
transportation charges prepaid, which Hitachi, upon inspection,
determine to be defective in material and/or workmanship.
The foregoing shall constitute the sole remedy for any breach of
Hitachi's warranty. See the Hitachi warranty booklet for details on
the warranty period. This warranty extends only to you, the original
Purchaser. It is not transferable to anyone who subsequently purchases
the emulator product from you. Hitachi is not liable for any claim
made by a third party or made by you for a third party.
DISCLAIMER
HITACHI MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT
SHALL HITACHI BE LIABLE FOR ANY DIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
EMULATOR PRODUCT, THE USE OF ANY EMULATOR
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY,
THIS EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU
MUST ASSUME ALL RISK FOR THE USE AND RESULTS
OBTAINED FROM THE EMULATOR PRODUCT.
III
State Law:
Some states do not allow the exclusion or limitation of implied warranties or liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which may vary from
state to state.
The Warranty is Void in the Following Cases:
Hitachi shall have no liability or legal responsibility for any problems caused by misuse, abuse,
misapplication, neglect, improper handling, installation, repair or modifications of the emulator
product without Hitachi's prior written consent or any problems caused by the user system.
All Rights Reserved:
This user's manual and emulator product are copyrighted and all rights are reserved by Hitachi.
No part of this user's manual, all or part, may be reproduced or duplicated in any form, in hard-
copy or machine-readable form, by any means available without Hitachi's prior written consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics
and performance of Hitachi's semiconductor products. Hitachi assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third
party or Hitachi.
Figures:
Some figures in this user's manual may show items different from your actual system.
Limited Anticipation of Danger:
Hitachi cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this user's manual and on the emulator product are therefore not all inclusive.
Therefore, you must use the emulator product safely at your own risk.
IV
SAFETY PAGE
READ FIRST
READ this user's manual before using this emulator product.
KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
NOTE emphasizes essential information.
V
WARNING
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
assurance.
2. Always switch OFF the E6000 emulator and user system
before connecting or disconnecting any CABLES or
PARTS.
3. Always before connecting any CABLES, make sure that
pin 1 on both sides are correctly aligned.
4. Supply power according to the power specifications and
do not apply an incorrect power voltage. Use only the
provided power cable.
VI
Preface
Thank you for purchasing the H8S/2148, H8S/2138, H8S/2128 series, H8S/2149, H8S/2169,
H8/3577, H8/3567 series E6000 emulator.
The H8S/2148, H8S/2138, H8S/2128 series, H8S/2149, H8S/2169, H8/3577, H8/3567 series
E6000 emulator (hereafter referred to as the E6000) was designed as a software and hardware
development tool for systems based on Hitachi's original microcomputers HD6432148,
HD6432138, HD6432128 series, HD64F2149, HD64F2169, HD6433577, HD6433567 series.
The E6000 provides a CD-R that contains the Hitachi Debugging Interface (HDI) system program,
test program, and the users manual.
There are three manuals for the E6000: the H8S series E6000 Emulator User's Manual, the
Supplementary Information, and the Hitachi Debugging Interface User's Manual. The E6000
Emulator User's Manual describes E6000 functions common to all H8S series microcomputers.
The Supplementary Information describes the functions specialized for each microcomputer
supported by the H8S/2148, H8S/2138, H8S/2128 series, H8S/2149, H8S/2169 and H8/3577,
H8/3567 series E6000 emulator. Please read this manual before using the E6000.
To connect the E6000 to the user system, the user system interface cable for each package type is
available. For details on the user system interface cable, refer to the User System Interface Cable
User's Manual.
The following shows the related manuals:
·
·
·
·
H8S Series E6000 Emulator User's Manual (HS2000EPI61HE)
Hitachi Debugging Interface User's Manual (HS6400DIIW5SE)
User System Interface Cable User's Manual (HS2148ECH61HE, etc)
The PC interface board user's manual which will be the following manuals:
ISA Bus Interface Board User's Manual (HS6000EII01HE)
PCI Bus Interface Board User's Manual (HS6000EIC01HE, HS6000EIC02HE)
PCMCIA Interface Card User's Manual (HS6000EIP01HE)
LAN Adapter (HS6000ELN01H)
·
Optional Memory Board User's Manual
1M SIMM Memory Board User's Manual (HS6000EMS11HE)
4M SIMM Memory Board User's Manual (HS6000EMS12HE)
Note: Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the
United States and/or in other countries.
i
Contents
Section 1
Overview.........................................................................................1
1.1 Environment Conditions....................................................................................................1
1.2 Supported MCUs and User System Interface Cables ........................................................2
1.3 Operating Voltage and Frequency Specifications..............................................................5
Section 2 User System Interface .....................................................................7
2.1 Signal Protection ...............................................................................................................7
2.2 User System Interface Circuits ..........................................................................................7
Section 3
Notes on Use...................................................................................10
3.1 I/O Register Differences between Actual MCU and E6000 ..............................................10
3.2 Access to the Reserved Area and Internal RAM ...............................................................10
3.3 Support of Flash Memory..................................................................................................11
3.4 Hardware Standby .............................................................................................................11
Section 4
HDI Parameters...............................................................................13
4.1 Address Areas....................................................................................................................13
4.2 Access Status.....................................................................................................................14
4.3 I/O Module Selection ........................................................................................................15
Section 5 Diagnostic Test Procedure ..............................................................16
5.1 System Set-Up for Test Program Execution......................................................................16
5.2 Diagnostic Test Procedure Using the Test Program..........................................................17
ii
Figures
Figure 2.1
Figure 2.2
Figure 2.3
Figure 2.4
Default User System Interface Circuit...................................................................8
User System Interface Circuit for MD1, MD0, and NMI......................................8
User System Interface Circuit for RESET.............................................................8
User System Interface Circuit for AN0 to AN7, DA0, DA1, AVcc, AVss,
and Vref Signals........................................................................................................9
IRQ0IRQ7 and WAIT User System Interface Circuit.........................................9
Figure 2.5
Tables
Table 1.1 Environment Conditions ...........................................................................................1
Table 1.2 H8S/2148 Series MCUs and User System Interface Cable.......................................2
Table 1.3 H8S/2138 Series MCUs and User System Interface Cables .....................................2
Table 1.4 H8S/2128 Series MCUs and User System Interface Cables .....................................3
Table 1.5 H8S/2149 MCUs and User System Interface Cables................................................3
Table 1.6 H8S/2169 MCUs and User System Interface Cables................................................3
Table 1.7 H8/3577 Series MCUs and User System Interface Cables .......................................4
Table 1.8 H8/3567 Series MCUs and User System Interface Cables .......................................4
Table 1.9 Operating Voltage and Frequency Specifications.....................................................5
Table 1.10 Clock Selections........................................................................................................6
Table 4.1 Address Area Parameters..........................................................................................13
Table 4.2 Access Status Parameters..........................................................................................14
Table 4.3 I/O Modules ..............................................................................................................15
iii
Section 1 Overview
The H8S/2148, H8S/2138, H8S/2128 series H8S/2149, H8S/2169 and H8/3577, H8/3567 series
E6000 emulator (hereafter referred to as the E6000) is an efficient software and hardware
development support tool for application systems using Hitachi's original microcomputers
H8S/2148, H8S/2138, H8S/2128 series and H8/3577, H8/3567 series.
1.1
Environment Conditions
Table 1.1 Environment Conditions
Item
Specifications
Temperature
Operating: +10 to +35°C
Storage: 10 to +50°C
Humidity
Operating: 35 to 80% RH; no condensation
Storage: 35 to 80% RH; no condensation
No corrosive gases
Ambient gases
AC Power supply voltage
100 V to 240 V AC ±5%
50/60 Hz
0.6 A max.
User system voltage (UVcc)
Depends on the target MCU within the range 2.7 V to 5.5 V
1
1.2
Supported MCUs and User System Interface Cables
Tables 1.2 to 1.8 show the correspondence between the MCUs and the user system interface cables
supported by the E6000.
H8S/2148 Series:
Table 1.2 H8S/2148 Series MCUs and User System Interface Cable
MCU Type
Number
No.
Package
E6000 User System Interface Cables
1
HD6432148
HD64F2148
HD6432147
HD6432144
HD64F2144
HD6432143
HD6432142
HD64F2142R
100-pin QFP (FP-100B),
100-pin TQFP (TFP-100B)
HS2148ECH61H
H8S/2138 Series:
Table 1.3 H8S/2138 Series MCUs and User System Interface Cables
MCU Type
Number
No.
Package
E6000 User System Interface Cables
1
HD6432138
HD64F2138
HD6432137
HD6432134
HD64F2134
HD6432133
HD6432132
HD64F2132R
HD6432130
80-pin QFP (FP-80A)
HS2138ECH61H
2
80-pin TQFP (TFP-80C)
HS2138ECN61H
2
H8S/2128 Series:
Table 1.4 H8S/2128 Series MCUs and User System Interface Cables
MCU Type
Number
No.
Package
E6000 User System Interface Cables
1
HD6432128
HD64F2128
HD6432127R
HD6432126R
HD6432124
HD6432123
HD6432122
HD6432120
64-pin SDIP (DP-64S)
HS2128ECS61H
2
3
64-pin QFP (FP-64A)
HS2128ECH61H
HS2128ECN61H
80-pin TQFP (TFP-80C)
H8S/2149:
Table 1.5 H8S/2149 MCUs and User System Interface Cables
MCU Type
Number
No.
Package
E6000 User System Interface Cables
1
HD64F2149
100-pin QFP (FP-100B),
100-pin TQFP (TFP-100B)
HS2148ECH61H
Note: When emulating the H8S/2149, the H8S/2149 E6000 expansion I/O board (HS2149EIO61H)
and the E6000 are required.
H8S/2169:
Table 1.6 H8S/2169 MCUs and User System Interface Cables
MCU Type
Number
No.
Package
E6000 User System Interface Cables
1
HD64F2169
144-pin TQFP (TFP-144)
HS2169ECN61H
Note: When emulating the H8S/2169, the H8S/2169 E6000 expansion I/O board (HS2169EIO61H)
and the E6000 are required.
3
H8/3577 Series:
Table 1.7 H8/3577 Series MCUs and User System Interface Cables
MCU Type
Number
No.
Package
E6000 User System Interface Cables
1
HD6433577
HD6473577
HD6433574
64-pin SDIP (DP-64S)
HS2128ECS61H
2
64-pin QFP (FP-64A)
HS2128ECH61H
H8/3567 Series:
Table 1.8 H8/3567 Series MCUs and User System Interface Cables
MCU Type
Number
No.
Package
E6000 User System Interface Cables
1
HD6433567
HD6473567
HD6433564
42-pin SDIP (DP-42S)
HS3567ECS61H
2
3
HD6433567U
HD6473567U
HD6433564U
64-pin SDIP (DP-64S)
64-pin QFP (FP-64A)
HS3567UECS61H (Cable with USB
function)
HS3567UECH61H (Cable with USB
function)
4
1.3
Operating Voltage and Frequency Specifications
Table 1.9 shows the MCU operating voltage and frequency specifications supported by the E6000.
Note that some MCUs do not operate at neither a low voltage nor a high frequency.
Table 1.9 Operating Voltage and Frequency Specifications
Operating Frequency Range
(f) (MHz)
No.
MCU Types
Operating Voltage (V)
2.7-4.0
1
H8S/2148 series
H8S/2138 series
H8S/2128 series
2-10
4.0-4.5
2-16
4.5-5.5
2-20
2
3
H8S/2149
H8S/2169
2.7-3.6
2-10
H8/3577 series
4.5-5.5
2-20
2-10
H8/3567 series (except
for the MCUs listed
below)
4
HD6433564-10
4.5-5.5
NOTE
For details on the operating voltage and frequency
specifications, refer to the MCU hardware manual.
In the E6000, the clock can be selected by using the Configuration dialog box or the Clock
command.
5
Table 1.10 Clock Selections
Clock Command
Parameter
Configuration
Dialog Box Setting
Notes
8
8 MHz internal clock
10 MHz internal clock
12.5 MHz internal clock
16 MHz internal clock
20 MHz internal clock
Target
10
12
16
20
t
Default
t2
Target/2
Not supported by the actual MCU.
Use this clock only when the required clock
duty cannot be obtained.
NOTE
The system clock (f) frequency is the same clock
frequency input to the XTAL and EXTAL when external clock
t is specified.
For example, when a 20-MHz crystal
oscillator is connected to the XTAL and EXTAL of the user
system, the system clock (f) frequency is 20 MHz. When
external clock t2 is specified, the system clock (f) frequency
is 1/2 of the clock frequency input to the XTAL and EXTAL.
The frequency of the E6000 internal clock specified with
the HDI CLOCK command is applied to the system clock (f).
6
Section 2 User System Interface
All user system interface signals are directly connected to the MCU in the E6000 with no buffering
except for those listed below which are connected to the MCU through control circuits:
·
·
·
·
·
NMI
RESET
MD1, MD0
XTAL
EXTAL
·
WAIT
2.1
Signal Protection
All user system interface signals are protected from over- or under-voltage by use of diode arrays
except for the AVcc and Vref.
Pull-up resistors are connected to the port signals except for the analog port signals.
The Vcc signals (except for AVcc signals) at the head of the user system interface cable are
connected together, which is monitored by the E6000 to detect whether the user system hardware
is connected.
2.2
User System Interface Circuits
The interface circuit between the MCU in the E6000 and the user system has a signal delay of
about 8 ns due to the user system interface cable and it includes pull-up resistors. Therefore, high-
impedance signals will be pulled up to the high level. When connecting the E6000 to a user system,
adjust the user system hardware to compensate for propagation delays.
The following diagrams show the equivalent circuit examples of the interface signals.
7
Default:
Figure 2.1
Default User System Interface Circuit
Mode Pins (MD1 and MD0) and NMI: The NMI signal is input to the MCU through the
emulator control circuit. The rising/falling time of these signals must be 8 ns/V or less. The mode
pins are only monitored. The CPU mode depends on the HDI settings.
Figure 2.2
User System Interface Circuit for MD1, MD0, and NMI
RESET:
Figure 2.3
User System Interface Circuit for RESET
8
AN0 to AN7, DA0, DA1, AVcc, AVss, and Vref:
Figure 2.4
User System Interface Circuit for AN0 to AN7, DA0, DA1, AVcc, AVss, and
Vref Signals
IRQ0IRQ7 and WAIT: The IRQ0 to IRQ7 and WAIT signals are input to the MCU and also
to the trace acquiring circuit. Therefore, the rising and falling time of these signals must be within
8 ns/v or shorter.
Figure 2.5
IRQ0IRQ7 and WAIT User System Interface Circuit
9
Section 3 Notes on Use
3.1
I/O Register Differences between Actual MCU and E6000
In the E6000, one evaluation chip emulates several types of MCU. Therefore, there are some
differences in I/O registers between an actual MCU and the E6000. Note these differences when
accessing the I/O registers.
I/O port is in the input state at default. The I/O register contents indicate the emulator port status.
When the user system interface cable is not connected, the read value is 1 due to pull-up resistors.
In the E6000, accesses to the following registers for controlling the flash memory in the H8S/2148,
H8S/2138, H8S/2128 series, H8S/2149, H8S/2169 are invalid.
·
·
·
·
·
Flash memory control register 1 (FLMCR1: FF80)
Flash memory control register 2 (FLMCR2: FF81)
Erase block register 1 (EBR1: FF82)
Erase block register 2 (EBR2: FF83)
Serial timer control register (STCR: H'FFC3)
(Accesses to the FLSHE bit are invalid)
3.2
Access to the Reserved Area and Internal RAM
When accessing the reserved area and internal RAM, note the following:
1. Part of the reserved area (specified in each MCUs memory map) can be used as an external
address area when the RAME bit of the SYSCR is cleared to 0. Target (user memory) or
Emulator (optional memory) can be specified for this area with the Configuration settings.
2. If the reserved area other than that described in item 1 above is used, the operation in the actual
MCU cannot be guaranteed. If the user program extends to the reserved area during
debugging, select the MCU having the largest ROM capacity (for example, debug the
H8S/2144 program in the H8S/2148 mode).
3. Internal RAM (specified in each MCUs memory map) can be used as an external address area
when the RAME bit of the SYSCR is cleared to 0. Target (user memory) can be specified for
this area with the Configuration settings.
10
3.3
Support of Flash Memory
The E6000 does not emulate the flash memory in the MCU.
3.4
Hardware Standby
When the User Standby enable check box is selected in the Configuration window, the STBY
signal on the user system is directly input to the E6000.
When the STBY signal is input, the E6000 hardware is initialized and the E6000 stops emulation.
In such a case, terminate the HDI and restart the E6000. Therefore, we recommend to clear the
User Standby enable check box (not selected) for general emulation.
11
Section 4 HDI Parameters
4.1
Address Areas
Table 4.1 lists the parameters for address areas (Area) that can be specified with HDI command
line interface (Breakpoint command etc.) or displayed as trace results.
Table 4.1 Address Area Parameters
HDI Parameter
(Trace Display)
Address Area
Description
rom
(ROM)
On-chip ROM
MCU's on-chip ROM, which can be
read but cannot be written to.
ram
(RAM)
On-chip RAM
MCU's on-chip RAM (except for DTC
RAM), which can be read and written
to.
IO16
(I/O-16)
Internal I/O registers
(16-bit bus)
MCU's internal I/O registers for the 16-
bit bus.
IO8
(I/O-8)
Internal I/O registers
(8-bit bus)
MCU's internal I/O registers for the
8-bit bus.
ext16
(EXT-16)
External area
(16-bit bus)
External area for the 16-bit bus, which
can be allocated to the user system
memory or the optional SIMM memory
module in the E6000.
ext8
(EXT-8)
External area
(8-bit bus)
External area for the 8-bit bus, which
can be allocated to the user system
memory or the optional SIMM memory
module in the E6000.
Dtcram
(RAM/DTC)
DTC RAM
MCU's on-chip RAM for DTC.
13
4.2
Access Status
Table 4.2 lists the parameters for access status (Status) that can be specified with HDI command
line interface (Breakpoint command etc.) or displayed as trace window results.
Table 4.2 Access Status Parameters
HDI Parameter
(Trace Display)
Access Status
Description
dtc
(DTC)
On-chip DTC
Access by the MCU's DTC
prefetch
(PROG)
CPU prefetch
Instruction prefetch cycle by the CPU
data
CPU data access
Data access for instruction execution
by the CPU
(DATA)
14
4.3
I/O Module Selection
Table 4.3 lists the I/O modules that can be selected as Custom settings in the HDI command line
interface (Modules command).
Table 4.3 I/O Modules
HDI Parameter
DTC
I/O Module
Data transfer controller (DTC)
Timer connection
D/A converter
TIMER
D/A
HIF
HIF (host interface), KMIMR (keyboard matrix interrupt mask),
KMIMRA (keyboard matrix interrupt mask A), and KMPCR (port 6 pull-
up MOS control)
TMRY
TMRX
A/D
Timer Y
Timer X
A/D converter
IIC1
I2C bus interface 1 (IIC1)
I2C bus interface 0 (IIC0)
8-bit PWM timer (PWM)
14-bit PWM timer (PWM X)
Serial communication interface 2 (SCI2/IrDA standard)
Serial communication interface 1 (SCI1)
Keyboard buffer controller (PS/2)
IIC0
PWM8
PWM14
SCI2/IrDA
SCI1
PS/2
15
Section 5 Diagnostic Test Procedure
This section describes the diagnostic test procedure using the E6000 test program.
5.1
System Set-Up for Test Program Execution
To execute the test program, use the following hardware; do not connect the user system interface
cable and user system.
·
·
·
E6000 (HS2148EPI61H)
Host computer
The E6000 PC interface board which will be one of the following boards or card:
Select one interface board from the following depending on the PC interface specifications.
ISA bus interface board (HS6000EII01H)
PCI bus interface board (HS6000EIC01H, HS6000EIC02H)
PCMCIA interface card (HS6000EIP01H)
1. Install the E6000 PC interface board in the host computer and connect the supplied PC
interface cable to the board.
2. Connect the PC interface cable to the E6000.
3. Connect the supplied AC adapter to the E6000.
4. Initiate the host computer to make it enter DOS prompt command input wait state.
5. Turn on the E6000 switch.
16
5.2
Diagnostic Test Procedure Using the Test Program
Insert the CD-R (HS2148EPI61SR supplied with the E6000) into CD-ROM drive of the host
computer by pressing the Shift key, move the current directory to <Drive>:¥Diag with a command
prompt, and enter one of the following commands according to the PC interface board used to
initiate the test program:
1. ISA bus interface boad (HS6000EII01H)
>TM2148 ISA (RET)
2. PCI bus interface boad (HS6000EIC01H, HS6000EIC02H)
>TM2148 PCI (RET)
3. PCMCIA interface card (HS6000EIP01H)
>TM2148 PCCD (RET)
Be sure to initiate the test program from <Drive>:¥Diag. Do not initiate it from a directory other
than <Drive>:¥Diag, such as <Drive>:¥Diag¥TM2148 ISA (RET). If the test program is
initiated when the current directory is not <Drive>:¥Diag, the test program will not operate
correctly.
When S is added to the command line such as >TM2148 ISA S (RET), steps 1 to 18 will be
repeatedly executed. To stop the execution, enter Q.
Notes: 1. When the CD-R is inserted into the CD-ROM drive without pressing the Shift key, the
HDI installation wizard is automatically started.
2. <Drive> is a drive name for the CD-ROM drive.
3. Do not remove the CD-R from the CD-ROM drive during text program execution.
17
It will take about 11 minutes to execute the test program when the host computer using
Windows®95 runs at 166 MHz and the PCMCIA interface card is used. The following messages
are displayed during the test.
Message
E6000 H8S/2148 EMULATION BOARD Tests Vx.x
Description
Test program start
Hitachi Ltd (1999)
message. Vx.x shows
the version number.
SIMM module fitted? (1.None 2.1MB 3. 4MB) 1
Enter 1 because the
SIMM memory module is
not installed in this
example.
Searching for interface card ........OK, card at H'd0000
Shows that the PC
interface board is
correctly installed in
the host computer, and
displays the address
when the ISA bus interface is
installed.
The displayed address
depends on the
settings. When the PCI
interface board or PCMCIA
interface card is installed,
the address is not displayed.
Checking emulator is connected ......OK
Emulator Board Information:
Shows that the E6000 is
correctly connected to
the host computer.
Shows the ID number of
the lower board of the
E6000 (always 5).
Main Board ID
H'5
Emulation Board ID H'e
Shows the ID number of
the upper board of the
E6000 (always e).
Revision
H'x
Shows the revision number
of the upper board of the
E6000.
18
SIMM
No SIMM module inserted
Shows whether the SIMM
memory board is
installed.
Downloading firmware .....
Loading the test program.
01) Testing Main Board Register :
IDR0 Register.....................OK
PAGE Register.....................OK
TRACE G/A Register................OK
Shows the check results
for the registers in the
E6000 (normal
PERFM G/A Register................OK
CES GA register ..................OK
IDR1 Register.....................OK
completion).
02) Testing Dual-Port RAM :
Decode Test ......................OK
Marching Test ....................OK
Shows the results of
decoding test and step
test for the dual-port
RAM in the E6000 (normal
completion).
03) Testing Firmware RAM :
Decode Test. page range H'700 - H'71f ..........OK Shows the results of
decoding test for the
firmware RAM in the
E6000 (normal
completion).
Marching Test. page range H'700 - H'71f .........OK Shows the results of step
for the firmware RAM in
the E6000 (normal
completion).
Downloading firmware .....
04) Testing Trace RAM :
Loading the test program.
Decode Test. page range H'000 - H'04f ..........OK Shows the results of
decoding test for the
trace RAM (first half) in the
E6000 (normal
completion).
Marching Test. page range H'000 - H'04f .........OK Shows the results of step
test for the trace RAM (first
half) in the E6000 (normal
completion).
19
Decode Test. page range H'000 - H'04f ..........OK Shows the results of
decoding test for the
trace RAM (last half) in the
E6000 (normal
completion).
Marching Test. page range H'000 - H'04f .........OK Shows the results of step
test for the trace RAM (last
half) in the E6000 (normal
completion).
05) Testing Mapping RAM :
Decode Test. page range H'200 - H'27f ........OK
Shows the results of
decoding test for the
mapping RAM in the
E6000 (normal
completion).
Marching Test. page range H'200 - H'27f .........OK Shows the results of
step test for the
mapping RAM in the
E6000 (normal
completion).
06) Testing Internal ROM and RAM :
Setting up, please wait..
Shows the results of
decoding test and step test
for internal ROM and RAM
in the E6000 (normal
completion).
Decode Test ........................OK
Marching Test ......................OK
07) Testing Option RAM :
Setting up, please wait..
No SIMM fitted - test skipped
Shows the check results
for the optional SIMM
memory module in the
E6000 (not installed).
08) Testing STEP Operation :
Setting up, please wait..
Shows the check results
for the step execution
controlling circuits in the
E6000 (normal
Step Operation .....................OK
completion).
09) Testing Key Break :
Shows the check results
for the forced break
controlling circuits in the
E6000 (normal
Setting up, please wait..
Key Break ..........................OK
completion).
20
10) Testing Emulation RAM Hardware Break :
Setting up, please wait..
Shows the check results
for the illegal access break
controlling circuits in the E6000
(normal completion).
GRD Break ..........................OK
Setting up, please wait..
WPT Break ..........................OK
11) Testing Internal ROM Write-Protect :
Setting up, please wait..
Shows the check results
for the internal ROM write-
protection controlling
circuits in the E6000
Write-Protect ......................OK
(normal completion).
12) Testing Hardware Break :
Shows the check results for
the hardware break control
circuits in the E6000
Setting up, please wait..
A)Break Point Intialised .............OK
B)Event Detectors CES channel 1-12 ...OK
C)Test Sequencing 1 ..................OK
D)Check Range Break ..................OK
E)Check Range Break for Data .........OK
F)Check Compare Either ...............OK
(normal completion).
13) Testing Emulation RAM Trace :
Setting up, please wait..
Shows the check results for
the trace controlling circuits
in the E6000 (normal
completion).
A)Free Trace Test ....................OK
B)Range Trace Test ...................OK
C)Point to Point Trace Test ..........OK
D)Start and Stop Event Trace Test ....OK
E)Trace memory Overflow Test .........OK
F)Time STAMP Trace Test ..............OK
Time STAMP Trace Test 1 ............OK
Time STAMP Trace Test 2 ............OK
Time STAMP Trace Test 3 ............OK
14) Testing Runtime counter :
Setting up, please wait..
Shows the check results for
the run-time counter in the
E6000 (normal completion).
Testing Internal Clock = 16.0 MHz ....OK
Testing Internal Clock = 12.5 MHz ....OK
15) Testing Emulation Monitor :
Setting up, please wait..
Shows the check results for
the emulation monitor
A)EMA23-EMA0(MONIT00:D7-D0,MONIT10,E:D7-D0)TEST..OK
controlling circuits in the
B)ACST2-ACST0(MONIT0E:D2-D0)TEST............OK
C)ST3-ST0(MONIT2E:D3-D0)TEST................OK
D)BRKACK(MONIT0E:D7)TEST....................OK
E)CNN(MONIT3E:D1)TEST.......................OK
F)NOCLK(MONIT3E:D2)TEST.....................OK
E6000 (normal completion).
21
16) Testing PERM_GA :
Shows the check results
for the performance
Setting up, please wait..
A)Time Measure Test .........................OK analysis controlling
B)PERM_POINT TO POINT Time Measure Test .....OK circuits in the E6000
C)PERM_SUBROUTINE Time Measure Test .........OK (nomal completion).
D)PERM Time Out Bit Test
Time Out Test 1............................OK
Time Out Test 2............................OK
17) Testing Bus Monitor :
Setting up, please wait..
Shows the check results
for the bus monitor
A) Register test.............................OK controlling circuits in the
B) Parallel RAM test.........................OK E6000 (normal
C) SPRSEL2 test..............................OK completion).
Setting up, please wait..
D) RAM monitor test..........................OK
18) Testing Parallel Access :
Shows the check results
A)IN ROM Parallel Read Access(WORD) .........OK for the parallel access
B)IN ROM Parallel Write Access(WORD) ........OK controlling circuits in the
C)IN ROM Parallel Write Access(High Byte) ...OK E6000 (normal
D)IN ROM Parallel Write Access(Low Byte) ....OK completion).
E)IN RAM Parallel Read Access(WORD) .........OK
F)IN RAM Parallel Write Access(WORD) ........OK
G)IN RAM Parallel Write Access(High Byte) ...OK
H)IN RAM Parallel Write Access(Low Byte) ....OK
I)SIMM Parallel Read Access(WORD) ...........SKIP
J)SIMM Parallel Write Access(WORD) ..........SKIP
K)SIMM Parallel Write Access(High Byte) .....SKIP
L)SIMM Parallel Write Access(Low Byte) ......SKIP
0 total errors
Total number of errors.
Tests passed, emulator functioning correctly
Shows that the E6000 is
correctly operating.
22
相关型号：
HD64F2134TF20
Microcontroller, 16-Bit, FLASH, H8S/2000 CPU, 16MHz, CMOS, PQFP80, PLASTIC, TQFP-80
HITACHI
HD64F2134VFA10
Microcontroller, 16-Bit, FLASH, H8S/2000 CPU, 10MHz, CMOS, PQFP80, PLASTIC, QFP-80
HITACHI
HD64F2134VTF10
Microcontroller, 16-Bit, FLASH, H8S/2000 CPU, 10MHz, CMOS, PQFP80, PLASTIC, TQFP-80
HITACHI
©2020 ICPDF网 联系我们和版权申明