HD74ACT182FP-EL [RENESAS]
ACT SERIES, 4-BIT LOOK-AHEAD CARRY GENERATOR, PDSO16, FP-16DA;
| 型号： | HD74ACT182FP-EL |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | ACT SERIES, 4-BIT LOOK-AHEAD CARRY GENERATOR, PDSO16, FP-16DA 光电二极管 |
| 文件： | 总11页 (文件大小：80K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To all our customers
Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and
corporate statement, no changes whatsoever have been made to the contents of the document, and
these changes do not constitute any alteration to the contents of the document itself.
Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better
and more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corporation product best suited to the customer's application; they do not convey any
license under any intellectual property rights, or any other rights, belonging to Renesas Technology
Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any
third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Renesas Technology Corporation without notice due to product improvements or
other reasons. It is therefore recommended that customers contact Renesas Technology Corporation
or an authorized Renesas Technology Corporation product distributor for the latest product information
before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss
rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various
means, including the Renesas Technology Corporation Semiconductor home page
(http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, please be sure to evaluate all information as a total system before
making a final decision on the applicability of the information and products. Renesas Technology
Corporation assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device
or system that is used under circumstances in which human life is potentially at stake. Please contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor
when considering the use of a product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be
exported under a license from the Japanese government and cannot be imported into a country other
than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products
contained therein.
HD74AC182/HD74ACT182
Carry Lookahead Generator
ADE-205-378 (Z)
1st. Edition
Sep. 2000
Description
The HD74AC182/HD74ACT182 is a high-speed carry lookahead generator. It is generally used with the
HD74AC181 or HD74AC381 4-bit arithmetic logic unit to provide high-speed lookahead over word
lengths of more than four bits.
Features
•
•
Outputs Source/Sink 24 mA
HD74ACT182 has TTL-Compatible Inputs
Pin Arrangement
1
2
3
4
5
16 VCC
G1
P1
G0
P0
G3
15 P2
14
13
G2
Cn
12 Cn+X
11 Cn+y
10 G
P3 6
7
8
P
GND
9
Cn+z
(Top view)
HD74AC182/HD74ACT182
Logic Symbol
P0 G0
P1 G1
P2 G2
P3 G3
G
P
Cn
Cn+x
Cn+y
Cn+z
Pin Names
Cn
Carry Input
G0, G2
G1
G3
P0, P1
P2
P3
Carry Generate Inputs (Active Low)
Carry Generate Input (Active Low)
Carry Generate Input (Active Low)
Carry Propagate Inputs (Active Low)
Carry Propagate Input (Active Low)
Carry Propagate Input (Active Low)
Carry Outputs
Cn + x to Cn + z
G
P
Carry Generate Output (Active Low)
Carry Propagate Output (Active Low)
2
HD74AC182/HD74ACT182
Logic Diagram
Cn G0 P0
G1 P1
G2 P2
G3 P3
Cn+x
Cn+y
Cn+z
G
P
Please note that this diagram is provided only for the understanding of logic operations and should not be
used to estimate propagation delays.
Functional Description
The HD74AC182/HD74ACT182 carry lookahead generator accepts up to four pairs of Active Low Carry
Propagate (P0 to P3) and Carry Generate (G0 to G3) signals and an Active High Carry input (Cn) and
provides anticipated Active High carries (Cn + x, Cn + y , Cn + z) across four groups of binary adders. The
HD74AC182/HD74ACT182 also has Active Low Carry Propagate (P) and Carry Generate (G) outputs
which may be used for further level of lookahead. The logic equations provided at the outputs are:
Cn + x = G0 + P0Cn
Cn + y = G1 + P1G0 + P1P0Cn
Cn + z = G2 + P2G1 + P2P1G0 + P2P1P0Cn
G
P
= G3 + P3G2 + P3P2G1 + P3P2P1G0
= P3P2P1P0
Also, the HD74AC182/HD74ACT182 can be used with binary ALUs in an active Low or active High input
operand mode. The connections (Figure a) to and from the ALU to the carry lookahead generator are
identical in both cases. Carries are rippled between lookahead blocks. The critical speed path follows the
circled numbers. There are several possible arrangements for the carry interconnects, but all achieve about
the same speed. A 28-bit ALU is formed by dropping the last HD74AC182/HD74ACT182.
3
HD74AC182/HD74ACT182
Truth Table
Inputs
Outputs
Cn
X
L
G0
H
H
L
P0
H
X
X
L
G1
P1
G2
P2
G3
P3
Cn + x Cn + y
Cn + z
G
P
L
L
X
H
X
X
L
H
H
L
X
X
H
H
X
L
X
H
X
X
X
L
H
H
H
L
H
X
X
X
L
L
L
X
X
H
X
X
X
L
H
H
H
X
X
X
H
H
H
X
L
X
X
X
H
H
X
X
L
L
X
X
H
X
X
X
X
L
X
H
X
X
X
X
L
H
H
H
H
L
H
X
X
X
X
L
L
L
L
L
X
X
X
H
H
H
H
H
X
X
X
X
H
H
H
X
L
X
X
X
X
H
H
X
X
L
L
X
X
X
X
H
X
X
X
L
L
L
X
X
H
X
X
X
X
L
X
H
X
X
X
X
L
H
H
H
H
L
H
X
X
X
X
L
H
H
H
H
L
X
X
X
L
X
X
L
L
X
L
L
L
H
X
X
X
L
X
H
X
X
L
X
X
H
X
L
X
X
X
H
L
H
H
H
H
L
H :
High Voltage Level
Low Voltage Level
Immaterial
L
:
:
X
4
HD74AC182/HD74ACT182
DC Characteristics (unless otherwise specified)
Item
Symbol Max
Unit
Condition
Maximum quiescent supply current
ICC
ICC
ICCT
80
µA
VIN = VCC or ground, VCC = 5.5 V,
Ta = Worst case
Maximum quiescent supply current
Maximum ICC/input (HD74ACT182)
8.0
1.5
µA
VIN = VCC or ground, VCC = 5.5 V,
Ta = 25°C
mA
VIN = VCC – 2.1 V, VCC = 5.5 V,
Ta = Worst case
AC Characteristics: HD74AC182
Ta = +25°C
Ta = –40°C to +85°C
CL = 50 pF
CL = 50 pF
Item
Symbol VCC (V)*1
Min
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Typ
Max
10.5
8.0
Min
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Max
11.5
9.0
Unit
Propagation delay
Pn to P
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
3.3
5.0
3.3
5.0
3.3
5.0
3.3
5.0
3.3
5.0
3.3
5.0
8.0
5.5
8.0
5.5
9.5
7.5
9.0
7.0
ns
Propagation delay
Pn to P
10.5
8.0
11.5
9.0
ns
ns
ns
ns
ns
Propagation delay
Cn to Cn + x, y, z
12.0
10.0
12.0
10.0
13.0
10.5
14.0
11.5
13.0
11.0
13.0
11.0
14.0
11.5
15.5
12.5
Propagation delay
Cn to Cn + x, y, z
Propagation delay
Pn or Gn to Cn + x, y, z
Propagation delay
Pn or Gn to Cn + x, y, z
10.5
8.0
11.5
9.0
Note: 1. Voltage Range 3.3 is 3.3 V ± 0.3 V
Voltage Range 5.0 is 5.0 V ± 0.5 V
5
HD74AC182/HD74ACT182
AC Characteristics: HD74ACT182
Ta = +25°C
Ta = –40°C to +85°C
CL = 50 pF
CL = 50 pF
Item
Symbol VCC (V)*1
Min
Typ
Max
Min
Max
Unit
Propagation delay
Pn to P
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
5.0
5.0
5.0
5.0
5.0
5.0
1.0
7.0
8.0
9.0
9.0
9.0
10.0
9.0
1.0
10.0
ns
Propagation delay
Pn to P
1.0
1.0
1.0
1.0
1.0
10.0
11.0
11.0
11.0
12.5
1.0
1.0
1.0
1.0
1.0
11.0
12.0
12.0
12.0
13.5
ns
ns
ns
ns
ns
Propagation delay
Cn to Cn + x, y, z
Propagation delay
Cn to Cn + x, y, z
Propagation delay
Pn or Gn to Cn + x, y, z
Propagation delay
Pn or Gn to Cn + x, y, z
Note: 1. Voltage Range 5.0 is 5.0 V ± 0.5 V
Capacitance
Item
Symbol
CIN
Typ
Unit
Condition
VCC = 5.5 V
VCC = 5.0 V
Input capacitance
Power dissipation capacitance
4.5
pF
pF
CPD
50.0
6
HD74AC182/HD74ACT182
Package Dimensions
Unit: mm
19.20
20.00 Max
16
1
9
8
1.3
1.11 Max
7.62
+ 0.13
– 0.05
0.25
2.54 ± 0.25
0.48 ± 0.10
0° – 15°
Hitachi Code
DP-16
JEDEC
EIAJ
Mass (reference value)
Conforms
Conforms
1.07 g
Unit: mm
10.06
10.5 Max
9
8
16
1
+ 0.20
7.80
– 0.30
0.80 Max
1.15
0° – 8°
1.27
0.70 ± 0.20
*0.42 ± 0.08
0.40 ± 0.06
0.15
M
0.12
Hitachi Code
JEDEC
FP-16DA
—
EIAJ
Conforms
0.24 g
*Dimension including the plating thickness
Base material dimension
Mass (reference value)
7
HD74AC182/HD74ACT182
Unit: mm
9.9
10.3 Max
9
16
1
8
1.27
+ 0.10
6.10
– 0.30
1.08
0.635 Max
0° – 8°
+ 0.67
0.60
– 0.20
*0.42 ± 0.08
0.40 ± 0.06
0.15
0.25
M
Hitachi Code
JEDEC
EIAJ
FP-16DN
Conforms
Conforms
0.15 g
*Dimension including the plating thickness
Base material dimension
Mass (reference value)
Unit: mm
5.00
5.30 Max
16
9
1
8
0.65
0.13 M
0.65 Max
1.0
+ 0.08
– 0.07
*0.22
0.20 ± 0.06
6.40 ± 0.20
0° – 8°
0.50 ± 0.10
0.10
Hitachi Code
JEDEC
TTP-16DA
—
EIAJ
—
0.05 g
*Dimension including the plating thickness
Base material dimension
Mass (reference value)
8
HD74AC182/HD74ACT182
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-
safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
Europe
Asia
: http://semiconductor.hitachi.com/
: http://www.hitachi-eu.com/hel/ecg
: http://sicapac.hitachi-asia.com
Japan
: http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive, Dornacher Straβe 3
Hitachi Europe GmbH
Electronic Components Group
Hitachi Asia Ltd.
Hitachi Tower
16 Collyer Quay #20-00,
Singapore 049318
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower,
San Jose,CA 95134
D-85622 Feldkirchen, Munich
World Finance Centre,
Tel: <1> (408) 433-1990 Germany
Fax: <1>(408) 433-0223 Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://www.hitachi.com.sg
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon,
Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://www.hitachi.com.hk
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road,
Hung-Kuo Building,
Taipei (105), Taiwan
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585160
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Colophon 2.0
9
相关型号：
©2020 ICPDF网 联系我们和版权申明