PS8821-2-V [RENESAS]
1 Mbps ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8);
| 型号： | PS8821-2-V |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | 1 Mbps ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) 输出元件 |
| 文件： | 总18页 (文件大小：264K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
PHOTOCOUPLER
PS8821-1,-2
1 Mbps ANALOG OUTPUT TYPE
8-PIN SSOP (SO-8)
HIGH-SPEED PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS8821-1, -2 are optically coupled isolators containing a GaAlAs LED on the light emitting diode (input side)
and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip.
The PS8821-2 is suitable for high density applications.
FEATURES
PIN CONNECTION
•
•
•
•
•
40% reduction of mounting area (5-pin SOP × 2)
Low power consumption (VCC = 3.3 V)
High isolation voltage (BV = 2 500 Vr.m.s.)
High-speed response (tPHL = 0.6 μs MAX., tPLH = 0.9 μs MAX.)
Ordering number of tape product: PS8821-1-F3, F4: 1 500 pcs/reel
: PS8821-2-F3, F4: 1 500 pcs/
(Top View)
PS8821-1
8
7
6
5
1. NC
2. Anode
3. Cathode
4. NC
5. GND
6. V
7. NC
8. VCC
O
•
•
Pb-Free product
Safety standards
1
2
3
4
•
•
UL approved: File No. E72422
DIN EN60747-5-2 (VDE0884 Part2) approveon)
PS8821-2
8
7
6
5
1. Anode1
2. Cathode1
3. Cathode2
4. Anode2
5. GND
APPLICATIONS
•
•
•
•
Power over Ethernet
Computer and peripheral manufact
Substitutions for relays and pulsformers
Power supply
6. V
7. V
8. VCC
O
2
1
O
1
2
3
4
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10591EJ03V0DS (3rd edition)
Date Published August 2008 NS
Printed in Japan
2006, 2008
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS8821-1,-2
PACKAGE DIMENSIONS (UNIT: mm)
5.21 0.25
6.0 0.2
3.95 0.1
1.27
+0.10
0.10 S
0.25 M
0.4
–0.05
2
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
<R>
MARKING EXAMPLE
SnBi PLATING
PS8821-1
PS8821-2
Type Number
Assembly Lot
Type Number
8821-1
NL831
8821-2
NL831
Assembly Lot
N
N
N L 8 31
N L 8 31
Week Assembled
Year Assembled
(Last 1 Digit)
Week Assembled
Assembled
ast 1 Digit)
No. 1 pin Mark
Initial of NEC
(Engraved mark)
No. 1 pin Mark
Initial of NEC
(Engraved mark)
In-house Code
(L: Pb-Free)
-house Code
(L: Pb-Free)
Rank Code
Rank Code
Ni/Pd/Au PLATING
PS8821-1
PS8821-2
Type Numbe
Assem
Type Number
Assembly Lot
8821-1
NT831
8821-2
NT831
N
N
N
N T 8 31
Week Assembled
Year Assembled
(Last 1 Digit)
Week Assembled
Year Assembled
(Last 1 Digit)
No. 1 pin Mark
Initial of NEC
(Engraved mark)
No. 1 pin Mark
Initial of NEC
(Engraved mark)
In-house Code
(T: Pb-Free)
In-house Code
(T: Pb-Free)
Rank Code
Rank Code
3
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application
Part Number*1
PS8821-1
PS8821-1-A
Pb-Free
(SnBi)
20 pcs (Tape 20 pcs cut)
Standard products PS8821-1
(UL approved)
PS8821-1-F3
PS8821-1-F4
PS8821-2
PS8821-1-F3-A
PS8821-1-F4-A
PS8821-2-A
Embossed Tape 1 500 pcs/reel
20 pcs (Tape 20 pcs cut)
PS8821-2
PS8821-2-F3
PS8821-2-F4
PS8821-1-V
PS8821-2-F3-A
PS8821-2-F4-A
PS8821-1-V-A
Embossed Tape 1 500 pcs/reel
20 pcs (Tape 20 pcs cut)
DIN EN60747-5-2
(VDE0884 Part2)
Approved ption)
PS8821-1
PS8821-2
PS8821-1-V-F3 PS8821-1-V-F3-A
PS8821-1-V-F4 PS8821-1-V-F4-A
Embossed Tape 1 500 pcs/reel
PS8821-2-V
PS8821-2-V-A
20 pcs (Tape 20 pcs cut)
PS8821-2-V-F3 PS8821-2-V-F3-A
PS8821-2-V-F4 PS8821-2-V-F4-A
Embossed Tape 1 500 pcs/reel
PS8821-1
PS8821-1-AX
Pb-Free
20 pcs (Tape 20 pcs cut)
Standard products PS8821-1
(UL approved)
PS8821-1-F3
PS8821-1-F4
PS8821-2
PS8821-1-F3-AX
PS8821-1-F4-AX
PS8821-2-AX
(Ni/Pd/Au)
Embossed Tape 1 50el
20 pcs (Tapcut)
PS8821-2
PS8821-2-F3
PS8821-2-F4
PS8821-1-V
PS8821-2-F3-AX
PS8821-2-F4-AX
PS8821-1-V-AX
Embos1 500 pcs/reel
(Tape 20 pcs cut)
DIN EN60747-5-2
(VDE0884 Part2)
Approved (Option)
PS8821-1
PS8821-2
PS8821-1-V-F3 PS8821-1-V-F3-AX
PS8821-1-V-F4 PS8821-1-V-F4-AX
mbossed Tape 1 500 pcs/reel
PS8821-2-V
PS8821-2-V-AX
20 pcs (Tape 20 pcs cut)
PS8821-2-V-F3 PS8821-2-V-F3-
PS8821-2-V-F4 PS8821-2-V
Embossed Tape 1 500 pcs/reel
*1 For the application he Safety Standard, following part number should be used.
4
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
Unit
mA/ch
V/ch
Diode
Forward Current
Reverse Voltage
Power Dissipation*1
Supply Voltage
Output Voltage
Output Current
Power Dissipation*2
25
VR
5.0
PD
45
mW/ch
V
Detector
VCC
VO
7
7
V/ch
IO
8.0
mA/ch
mW/ch
Vr.m.s.
°C
PC
100
Isolation Voltage*3
BV
TA
2 500
Operating Ambient Temperature
Storage Temperature
–55 to +100
–55 to +125
Tstg
°C
*1 Reduced to 0.45 mA/°C at TA = 25°C or more.
*2 Reduced to 1.00 mA/°C at TA = 25°C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and o
Pins 1-4 shorted together, 5-8 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage
Symbol
VCC
MIN.
3.0
1
TY
MAX.
3.6
Unit
V
Forward Current (ON)
Input Voltage (OFF)
IF (ON)
20
mA
V
VF (OFF)
0.8
5
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Conditions
MIN.
TYP.
1.7
MAX.
2.2
Unit
V
Diode
Forward Voltage
Reverse Current
VF
IR
IF = 16 mA
VR = 3 V
10
μA
Forward Voltage
ΔVF/ΔTA IF = 16 mA
−2.1
mV/°C
Temperature Coefficient
Terminal Capacitance
High Level Output Current
Low Level Output Voltage
Ct
V = 0 V, f = 1 MHz
30
0.01
0.1
pF
μA
V
Detector
IOH
IF = 0 mA, VCC = VO = 3.3 V
1
VOL
ICCH
IF = 16 mA, VCC = 3.3 V, IOL = 1.2 mA
IF = 0 mA, VO = open, VCC = 3.3 V
0.4
10
High Level Supply Current
(PS8821-1)
0.1
μA
High Level Supply Current
(PS8821-2)
0.2
100
200
40
20
Low Level Supply Current
(PS8821-1)
ICCL
IF = 16 mA, VO = open, VCC = 3.3 V
Low Level Supply Current
(PS8821-2)
Coupled
Current Transfer Ratio
CTR
IF = 16 mA, VCC = 3.3 V, VO
VI-O = 1 kVDC, RH = 40
20
%
Input-Output
RI-O
1011
Ω
Isolation Resistance
Insulation Resistance
RI-I
CI-O
CI-I
VI-I = 5 VDC, RH 60%
V = 0 Hz
107
(Input-Input), (PS8821-2)
Input-Output
0.6
0.3
0.3
0.5
1
pF
μs
Isolation Capacitance
Insulation Capacitance
(Input-Input), (PS8821-2)
Propagation Delay Time
tPLH
CMH
IF = 10 mA, VCC = 3.3 V, RL = 1.8 kΩ,
CL = 15 pF, VTHHL = VTHLH = 1.5 V,
TA = 0 to 100°C
0.6
0.9
(H → L)*1
Propagation Delay T
(L → H)*1
Common Mo
IF = 0 mA, VCC = 3.3 V, RL = 4.1 kΩ,
kV/μs
Transient Immty at
High Level Output*2
VCM = 1 kV
Common Mode
CML
IF = 10 mA, VCC = 3.3 V, RL = 4.1 kΩ,
−1
Transient Immunity at
Low Level Output*2
VCM = 1 kV
6
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
*1 Test circuit for propagation delay time
VCC = 3.3 V
PS8821-1
(PW = 1
Duty cycle = 1/10)
μ
s,
Pulse input (I )
F
μ
0.1
F
R
L
= 1.8 kΩ
(Monitor)
= 15 pF
V
O
Input
(Monitor)
(I = 10 mA)
F
Input
C
L
50%
47 Ω
Output
V
CC = 3.3 V
1.5 V
PS8821-2
VOL
Pulse input (I )
Duty cycle = 1/10)
F
(PW = 1 s,
μ
t
PHL
tPLH
RL
= 1.8 kΩ
(Monitor)
Input
V
O
(Monitor)
0.1 F
μ
CL = 15 pF
47 Ω
Remark CL is approximately 15 pF which includes probe and stray wpacitance.
*2 Test circuit for common mode transient immunity
PS8821-1
V
CC =
R
L
=
onitor)
0.1 μF
5 pF
1 kV
90%
10%
V
V
CM
0 V
I
F
V
CM
t
r
t
f
O
V
OH
OL
PS882
(I
F
= 0 mA)
2 V
I
F
SW
V
CC = 3.3 V
0.8 V
R
L
= 4.1 kΩ
V
O
V
(IF
= 10 mA)
V
O
(Monitor)
0.1
μ
F
C
L
= 15 pF
V
CM
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
7
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
TRANSISTOR POWER DISSIPATION vs.
AMBIENT TEMPERATURE
50
40
30
20
10
120
100
80
60
40
20
0
25
50
75
100
0
25
75
100
Ambient Temperature TA (˚C)
Ambiperature TA (˚C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
HIGH OUTPUT CURRENT vs.
AMTEMPERATURE
100
10
1 000.0
0.0
10.0
mA,
= VO = 3.3 V
TA = +100˚C
+50˚C
+25˚C
1
0˚C
–25˚C
0.1
0.01
1.0
1.0
1.2
1.4
1.6
1.8
2.2
2.4
–50
–25
0
25
50
75
100
Forward Volta)
Ambient Temperature TA (˚C)
CURRENT TRER RATIO vs.
FORWARD ENT
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
70.0
60.0
50.0
40.0
30.0
20.0
10.0
0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
VCC = 3.3 V,
VO = 0.4 V
Normalized to 1.0
at TA = 25˚C, IF = 10 mA,
VCC = 3.3 V, VO = 0.4 V
0.2
0.0
–50
–25
0
25
50
75
100
1
10
Forward Current IF (mA)
50
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
8
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
PROPAGATION DELAY TIME vs.
FORWARD CURRENT
NORMALIZED PROPAGATION DELAY TIME
vs. AMBIENT TEMPERATURE
2.0
1.0
0
5
Normalized to 1.0
V
R
CC = 3.3 V,
μ
at T
= 10 mA, VCC = 3.3 V,
= 0.4 V, R = 1.8 kΩ
A
= 25˚C,
L
= 1.8 kΩ
I
F
4
3
2
1
VO
L
t
PLH
PHL
t
t
PLH
t
PHL
0
8
10
12
14
16
18
–25
100
–50
0
25
50
75
(˚C)
Forward Current I
F
(mA)
Ambient Temerature T
A
Remark The graphs indicate nominal characteristics.
9
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.0 0.05
4.0 0.1
+0.1
–0
4.05 MAX.
1.5
1.7 0.1
3.6 0.1
6.4 0.1
0.3 0.05
8.0 0.1
Taping Direction
P1-F4
1-2-F4
PS8821-1-F3
PS8821-2-F3
Outline and Dimenseel)
2.0 0.5
2.0 0.5
13.0 0.2
φ
R 1.0
φ
φ
φ
φ
21.0 0.8
13.5 1.0
17.5 1.0
11.9 to 15.4
Outer edge of
flange
Packing: 1 500 pcs/reel
10
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.45
5.25
Remark All dimensions in this figure must be evaluateuse.
11
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
180˚C
120˚C
120 30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
or below (molten solder temperature)
seconds or less
• Preheating conditio
• Number of times
• Flux
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins)
• Flux
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
12
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
<R>
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
13
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
<R>
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Speck
Unit
Application classification (DIN EN 60664-1 VDE0110 Part 1)
for rated line voltages ≤ 300 Vr.m.s.
for rated line voltages ≤ 600 Vr.m.s.
IV
III
Climatic test class (DIN EN 60664-1 VDE0110)
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
UIORM
Upr
566
849
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr
1 061
Vpeak
Vpeak
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
UTR
4 000
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Clearance distance
>4.0
mm
mm
Creepage distance
>4.0
Comparative tracking index (DIN IEC 112/VDE 0303 Part 1)
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
175
III a
Tstg
TA
–55 to +125
–55 to +100
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in cat, see thermal
derating curve)
Package temperature
Tsi
Isi
150
150
600
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation
Isolation resistance
Psi
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
Ω
14
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
•
The information in this document is current as of August, 2008. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any mens without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility y errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, ts or other intellectual
property rights of third parties by or arising from the use of NEC Electronics ts listed in this document
or any other liability arising from the use of such products. No licensess, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rightC Electronics or others.
Descriptions of circuits, software and other related information in tument are provided for illustrative
purposes in semiconductor product operation and applicatimples. The incorporation of these
circuits, software and information in the design of a custoquipment shall be done under the full
responsibility of the customer. NEC Electronics assumeesponsibility for any losses incurred by
customers or third parties arising from the use of these csoftware and information.
•
• While NEC Electronics endeavors to enhance the quliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibefects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injurding death) to persons arising from defects in NEC
Electronics products, customers must incosufficient safety measures in their design, such as
redundancy, fire-containment and anti-failures.
• NEC Electronics products are classifiethe following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade apply to NEC Electronics products developed based on a customer-
designated "quality assurance " for a specific application. The recommended applications of an NEC
Electronics product depend ality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics proore using it in a particular application.
"Standard": Computeequipment, communications equipment, test and measurement equipment, audio
and viuipment, home electronic appliances, machine tools, personal electronic equipment
and inial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
15
Data Sheet PN10591EJ03V0DS
PS8821-1,-2
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Elnics Corporation
Issued by: Renesas Electronics Corporation (http://wwesas.com)
Send any inquiries to http://www.renesas.com/inqu
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this do, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liabitsoever for any damages
incurred by you resulting from errors in or omissions from the information included he
Renesas Electronics products are classified according to the following three quality “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics producs on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronict before using it in a particular
application. You may not use any Renesas Electronics product for any appcategorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Rlectronics product for any application for
which it is not intended without the prior written consent of Renesas ics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arm the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product iended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Rlectronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets ooks, etc.
“Standard”:
Computers; office equipment; comons equipment; test and measurement equipment; audio and visual
equipment; home electronic applmachine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (aues, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equind medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace eqsubmersible repeaters; nuclear reactor control systems; medical equipment or
systems for life sup. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.gn, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Els products described in this document within the range specified by Renesas Electronics,
especially with respect to thum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installatither product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out oof Renesas Electronics products beyond such specified ranges.
Although Renesas Elenics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
相关型号：
PS8821-2-V-AX
Linear IC Output Optocoupler, 1-Element, 2500V Isolation, 1MBps, LEAD FREE, SSOP-8
NEC
©2020 ICPDF网 联系我们和版权申明