PS9013-Y-AX [RENESAS]
1 Mbps, OPEN COLLECTOR OUTPUT, HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER;型号: | PS9013-Y-AX |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | 1 Mbps, OPEN COLLECTOR OUTPUT, HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER 驱动 输出元件 |
文件: | 总16页 (文件大小:999K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet
R08DS0136EJ0100
Rev.1.00
PS9013
Mar 11, 2016
1 Mbps, OPEN COLLECTOR OUTPUT, HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER
DESCRIPTION
The PS9013 is an optically coupled isolator containing a GaAlAs LED on the input side and a photo diode and a signal
processing circuit on the output side on one chip.The PS9013 is specified high CMR and pulse width distortion with
operating temperature. It is suitable for IPM drive.
FEATURES
PIN CONNECTION
Long creepage distance (8 mm MIN.)
(Top View)
High common mode transient immunity (CMH, CML = 50 kV/s MIN.)
Operating Ambient Temperature (125 C MAX.)
High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
Maximum propagation delays (tPLH – tPHL = 270 ns TYP.)
High isolation voltage (BV = 5 000 Vr.m.s.)
Open collector output
Embossed tape product : PS9013-F3: 3 000 pcs/reel
Pb-Free product
Safety standards
5
1
4 3
1. Anode
2. Cathode
3. GND
4. VO
5. VCC
2
UL approved: UL1577, Double protection
CSA approved: CA5A, CAN/CSA-C22.2 60065, CAN/CSA-C22.2 60950-1, Reinforced insulation)
VDE approval: DIN EN 60747-5-5 (Option)
APPLICATIONS
IPM Driver
General purpose inverter
Start of mass production
Mar.2016
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 1 of 15
PS9013
Chapter Title
PACKAGE DIMENSIONS (UNIT: mm)
Weight:0.119g (typ.)
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance
MIN.
8 mm
Outer Creepage Distance
Isolation Distance
8 mm
0.15 mm
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 2 of 15
PS9013
Chapter Title
BLOCK DIAGRAM
5
4
1
2
3
Shield
LED
ON
Output
L
OFF
H
MARKING EXAMPLE
9013
9013
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 3 of 15
PS9013
Chapter Title
ORDERING INFORMATION
Part Number
Order Number
Solder
Plating
Specification
Packing Style
Safety Standard
Application
Part
Number*1
Approval
PS9013
PS9013-Y-AX
Pb-Free and
Halogen Free
(Ni/Pd/Au)
20 pcs (Tape 20 pcs cut)
Embossed Tape 3 000
pcs/reel
Standard products
(UL,CSA approved)
PS9013
PS9013-F3
PS9013-Y-F3-AX
PS9013-V
PS9013-Y-V-AX
20 pcs (Tape 20 pcs cut)
Embossed Tape 3 000
pcs/reel
UL,CSA approved
DIN EN 60747-5-5
(VDE 0884-5):
2011-11 approved
(Option)
PS9013-V-F3
PS9013-Y-V-F3-AX
Note: *1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
25
Unit
mA
V
Diode
Forward Current*1
Reverse Voltage
Supply Voltage
Output Voltage
Output Current
Power Dissipation*2
VR
5
Detector
VCC
VO
0.5 to +30
0.5 to +30
15
V
V
IO
mA
mW
Vr.m.s.
C
PC
250
Isolation Voltage *3
BV
TA
5 000
Operating Ambient Temperature
Storage Temperature
40 to +125
55 to +150
Tstg
C
Notes: *1. Reduced to 0.325 mA/C at TA = 85C or more.
*2. Reduced to 4.15 mW/C at TA = 85C or more
*3. AC voltage for 1 minute at TA = 25C, RH = 60% between input and output.
Pins 1-3 shorted together, 4-6 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
VCC
MIN.
4.5
8
TYP.
MAX.
25
Unit
V
Supply Voltage
15
Forward Current (ON)
Forward Voltage (OFF)
IF (ON)
12
mA
V
VF (OFF)
-2
0.8
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 4 of 15
PS9013
Chapter Title
ELECTRICAL CHARACTERISTICS (TA = –40 to +125°C, VCC = 15 V, unless otherwise
specified)
Parameter
Symbol
VF
Conditions
MIN.
TYP.*1
MAX.
1.75
10
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IF = 10 mA
VR = 3 V
1.35
1.56
IR
A
pF
V
Ct
V = 0 V, f = 1 MHz, TA = 25C
IF = 10 mA, IOL = 2.4 mA
30
0.13
0.01
1.0
Detector Low Level Output Voltage
High Level Output Current
VOL
IOH
0.6
50
VCC = VO = 20 V, VF = 0.8 V
VCC = 20 V, VF = 0.8 V, VO = open
VCC = 20 V, IF = 10 mA, VO = open
VO = 0.8 V, IO = 0.75 mA
A
mA
mA
High Level Supply Current
ICCH
ICCL
1.3
1.3
Low Level Supply Current
1.0
Coupled Threshold Input Current
IFHL
1.5
5.0
mA
(H L)
Isolation Resistance
Isolation Capacitance
VI-O = 1 kVDC, RH = 40 to 60%,
RI-O
CI-O
tPHL
1011
pF
ns
TA = 25C
V = 0 V, f = 1 MHz, TA = 25C
0.7
Propagation Delay Time
(H L)*2
IF = 10 mA, RL = 20 k, CL = 100 pF,
250
500
750
650
650
VTHHL = 1.5 V, VTHLH = 2.0 V
Propagation Delay Time
(L H)*2
tPLH
520
270
270
Maximum Propagation
Delays
tPLHtPHL
200
Pulse Width Distortion
(PWD)*2
tPHL-tPLH
Common Mode
TA = 25C, IF = 0 mA, VO > 3.0 V,
VCM = 1.5 kV, RL = 20 k,
CL = 100 pF
Transient Immunity at High
Level Output*3
CMH
50
50
kV/s
kV/s
Common Mode
TA = 25C, IF = 10 mA, VO < 1.0 V,
VCM = 1.5 kV, RL = 20 k,
CL = 100 pF
Transient Immunity at Low
Level Output*3
CML
Notes*: 1. Typical values at TA = 25°C.
2. Test circuit for propagation delay time
I
F
(ON)
(ON)
Input
V
CC = 15 V
Pulse input (I
F
= 10 mA)
50% I
F
0.1 μF
R = 20 kΩ
L
(PW = 10
Duty cycle = 1/10)
μ
s,
V (Monitor)
O
15 V
C = 100 pF
L
Output
Input
(Monitor)
V
V
THLH = 2.0 V
VTHHL = 1.5 V
47 Ω
OL
tPHL
tPLH
C
L
includes probe and stray wiring capacitance.
3. Test circuit for common mode transient immunity
1.5 kV
90%
10%
V
V
CM
V
CC = 15 V
SW I
F
0 V
0.1 μF
R
C
L
L
= 20 kΩ
tr
tf
V (Monitor)
O
B
A
= 100 pF
O
15 V
3.0 V
(Switch A: I
F
= 0 mA)
1.0 V
V
O
V
OL
V
CM
(Switch B: I
F
= 10 mA)
CL includes probe and stray wiring capacitance.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 5 of 15
PS9013
Chapter Title
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
300
250
200
30
25
20
150
100
15
10
50
0
5
0
75
0
25
50
100
125
150
75
0
25
50
100
125
150
Ambient Temperature TA (℃)
Ambient Temperature TA (℃)
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
2.00
VCC=20V
VO=Open
ICCH:VF=0.8V
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0.00
I
CCL:IF=10mA
ICCH
ICCL
50
100
-50 -25
0
25
75
125 150
Ambient Temperature TA (℃)
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
5.0
0.6
0.5
0.4
0.3
0.2
VCC=15V
VO=0.8V
IO=0.75mA
Vcc=15V
IF=10mA
Io=2.4mA
4.0
3.0
2.0
1.0
0.0
0.1
0.0
50
100
-50 -25
0
25
75
125 150
50
100
-50 -25
0
25
75
125 150
Ambient Temperature TA (℃)
Ambient Temperature TA (℃)
Remark The graphs indicate nominal characteristics.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 6 of 15
PS9013
Chapter Title
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. FORWARD CURRENT
OUTPUT CURRENT vs.
FORWARD CURRENT
700
600
500
400
300
200
100
16
TA=125℃
14
12
10
8
tPLH
TA=25℃
|tPHL‐tPLH
|
TA=40℃
6
4
2
0
tPHL
Vcc=15V
CL=100pF
RL=20KΩ
VO=0.6V
0
5
0.0
20.0
10
15
20
25
5.0
10.0
0
15.0
Forward Current IF (mA)
Forward Current IF (mA)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. SUPPLY VOLTAGE
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
2000
700
600
500
400
300
200
100
0
tPLH
IF=10mA
CL=100pF
RL=20KΩ
1800
1600
tPLH
1400
1200
1000
800
PWD
tPHL
600
400
200
0
Vcc=15V
IF=10mA
tPHL
CL=100pF
RL=20KΩ
|tPHL‐tPLH
|
50
100
-50 -25
0
25
75
125 150
10
20
30
0
Supply Voltage VCC (V)
Ambient Temperature TA (℃)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
PROPAGATION DELAY TIME
vs. LOAD CAPACITANCE
1200
1000
800
600
400
200
0
2000
tPLH
IF=10mA
Vcc=15V
CL=100pF
tPLH
IF=10mA
Vcc=15V
RL=20KΩ
1800
1600
1400
1200
1000
800
|tPHL‐tPLH
|
600
400
200
0
tPHL
tPHL
500
0
200
300
100
400
50
0
10
20
30
40
Load Capacitance CL (pF)
Load Resistance RL (KΩ)
Remark The graphs indicate nominal characteristics.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 7 of 15
PS9013
Chapter Title
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
600
tPLH
IF=10mA
Vcc=15V
CL=15pF
500
400
300
200
100
0
|tPHL‐tPLH
|
tPHL
25
0
5
10
15
20
Load Resistance RL (KΩ)
Remark The graphs indicate nominal characteristics.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 8 of 15
PS9013
Chapter Title
TAPING SPECIFICATIONS (UNIT: mm)
Tape Direction
Outline and Dimensions (Taps)
Outline and Dimensions (Reel)
Packing:3000 pcs/reel
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 9 of 15
PS9013
Chapter Title
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
Remark All dimensions in this figure must be evaluated before use.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 10 of 15
PS9013
Chapter Title
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
•
•
•
•
•
•
Peak reflow temperature
260C or below (package surface temperature)
10 seconds or less
60 seconds or less
12030 s
Time of peak reflow temperature
Time of temperature higher than 220C
Time to preheat temperature from 120 to 180C
Number of reflows
Three
Flux
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
•
•
•
•
•
Temperature
Time
260C or below (molten solder temperature)
10 seconds or less
Preheating conditions 120C or below (package surface temperature)
Number of times
Flux
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
•
•
•
Peak Temperature (lead part temperature) 350C or below
Time (each pins)
3 seconds or less
Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
Fluxes
•
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output
transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 11 of 15
PS9013
Chapter Title
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance
between the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 12 of 15
PS9013
Chapter Title
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Spec.
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
40/125/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.6 UIORM., Pd 5 pC
UIORM
Upr
Vpeak
Vpeak
1 130
1 808
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM., Pd 5 pC
Upr
2 119
Vpeak
Vpeak
Highest permissible overvoltage
UIOTM
8 000
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
2
400
CTI
II
Tstg
TA
–55 to +150
–40 to +125
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
Ris MIN.
Ris MIN.
1012
1011
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Tsi
Isi
Psi
175
400
700
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 13 of 15
PS9013
Chapter Title
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 14 of 15
PS9013
Chapter Title
This product uses gallium arsenide (GaAs).
GaAs Products
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
R08DS0136EJ0100 Rev.1.00
Mar 11, 2016
Page 15 of 15
Notice
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
SALES OFFICES
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
California Eastern Laboratories, Inc.
4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A.
Tel: +1-408-919-2500, Fax: +1-408-988-0279
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HAL II Stage, Indiranagar, Bangalore, India
Tel: +91-80-67208700, Fax: +91-80-67208777
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2016 Renesas Electronics Corporation. All rights reserved.
Colophon 5.0
相关型号:
PS9013-Y-F3-AX
1 Mbps, OPEN COLLECTOR OUTPUT, HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER
RENESAS
PS9013-Y-V-AX
1 Mbps, OPEN COLLECTOR OUTPUT, HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER
RENESAS
PS9013-Y-V-F3-AX
1 Mbps, OPEN COLLECTOR OUTPUT, HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER
RENESAS
©2020 ICPDF网 联系我们和版权申明