PS9113-V-AX [RENESAS]
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE DRIVE 5-PIN SOP (SO-5) PHOTOCOUPLER;
| 型号： | PS9113-V-AX |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | 1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE DRIVE 5-PIN SOP (SO-5) PHOTOCOUPLER 输出元件 光电 |
| 文件： | 总16页 (文件大小：4989K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet
PS9113
R08DS0124EJ0301
Rev.3.01
1 Mbps, OPEN COLLECTOR OUTPUT
Oct 29, 2018
HIGH CMR, INTELLIGENT POWER MODULE DRIVE 5-PIN SOP (SO-5) PHOTOCOUPLER
DESCRIPTION
The PS9113 is an optically coupled isolator containing an AlGaAs LED on the input side and a photo diode and a signal
processing circuit on the output side on one chip.
The PS9113 is specified high CMR, high CTR and pulse width distortion with operating temperature. It is suitable for
IPM drive.
FEATURES
High instantaneous common mode rejection voltage (CMH, CML = ±15 kV/µs MIN.)
Small package (SO-5)
PIN CONNECTION
(Top View)
High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
Propagation Delay Difference (tPLH – tPHL = 270 ns TYP.)
Pulse width distortion (|tPHL – tPLH| = 270 ns TYP.)
High isolation voltage (BV = 3 750 Vr.m.s.)
Open collector output
Ordering number of taping product: PS9113-F3: 2 500 pcs/reel
Pb-Free product
Safety standards
5
1
4
3
1. Anode
2. Cathode
3. GND
4. VO
5. VCC
2
UL approved: UL1577, Single protection
CSA approved: CAN/CSA-C22.2 No. 62368-1, Basic insulation
VDE approved: DIN EN 60747-5-5 (Option)
APPLICATIONS
IPM Driver
General purpose inverter
Start of mass production
Jan.2003
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 1 of 15
PS9113
PACKAGE DIMENSIONS (UNIT: mm)
+0.3
3.4
–0.1
5
4
3
7.0±0.3
(4.4)*1
1
2
0.5±0.3
1.27
0.25 M
+0.10
0.4
–0.05
*1 ( ) indicates reference dimension.
Weight: 0.08g (typ.)
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
PS9113
4.2 mm
4.2 mm
0.2 mm
Creepage Distance (MIN.)
Isolation Distance (MIN.)
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 2 of 15
PS9113
FUNCTIONAL DIAGRAM
5
4
1
2
3
Shield
LED
ON
Output
L
OFF
H
MARKING EXAMPLE
Ni/Pd/Au PLATING
Type Number
Assembly Lot
*1
9113
N931
No. 1 pin Mark
Initial of Renesas
(Engraved mark)
R
N
9
31
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
*1 Bar : Pb-Free
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 3 of 15
PS9113
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application
Part
Number*1
PS9113
PS9113-AX
Pb-Free
20 pcs (Tape 20 pcs cut)
Standard products
PS9113
PS9113-F3
PS9113-F3-AX
(Ni/Pd/Au)
Embossed Tape 2500
pcs/reel
(UL, CSA approved)
PS9113-V
PS9113-V-AX
20 pcs (Tape 20 pcs cut)
UL, CSA,
DIN EN 60747-5-5
approved
PS9113-V-F3 PS9113-V-F3-AX
Embossed Tape 2 500
pcs/reel
Notes*: 1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Forward Current*1
Reverse Voltage
Supply Voltage
Output Voltage
Output Current
Symbol
Ratings
25
Unit
mA
V
Diode
I
F
VR
5
Detector
V
CC
0.5 to +25
0.5 to +25
15
V
V
O
V
I
O
mA
mW
Vr.m.s.
C
Power Dissipation*2
P
C
100
Isolation Voltage*3
BV
3 750
Operating Ambient Temperature
Storage Temperature
TA
40 to +100
55 to +125
T
stg
C
Notes*: 1. Reduced to 0.33 mA/°C at TA = 70°C or more.
2. Reduced to 1.9 mW/°C at TA = 70°C or more.
3. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 4 of 15
PS9113
RECOMMENDED OPERATING CONDITIONS
Parameter
High Level Input Current
Symbol
MIN.
10
0
TYP.
MAX.
20
Unit
mA
V
I
FH
Output Voltage
Supply Voltage
LED Off Voltage
V
O
20
V
CC
4.5
0
15
20
V
V
F
0.8
V
ELECTRICAL CHARACTERISTICS (TA = –40 to +100°C, VCC = 15 V, unless otherwise specified)
Parameter
Symbol
VF
Conditions
MIN. TYP.*1 MAX.
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IF = 10 mA
VR = 3 V
1.3
1.65
2.1
IR
200
A
pF
V
Ct
V = 0 V, f = 1 MHz, TA = 25C
IF = 10 mA, IOL = 2.4 mA
30
0.13
0.01
1.0
Detector Low Level Output Voltage
High Level Output Current
VOL
IOH
0.6
50
VCC = VO = 20 V, VF = 0.8 V
VCC = 20 V, VF = 0.8 V, VO = open
VCC = 20 V, IF = 10 mA, VO = open
VO = 0.8 V, IO = 0.75 mA
A
mA
mA
High Level Supply Current
Low Level Supply Current
ICCH
ICCL
1.3
1.3
1.0
Coupled Threshold Input Current
IFHL
1.5
5.0
mA
%
(H L)
Current Transfer Ratio
(IC/IF)
IF = 10 mA, VO = 0.6 V
CTR
44
110
Isolation Resistance
VI-O = 1 kVDC, RH = 40 to 60%,
TA = 25C
RI-O
CI-O
tPHL
1011
Isolation Capacitance
V = 0 V, f = 1 MHz, TA = 25C
IF = 10 mA, RL = 20 k,
CL = 100 pF,
0.6
pF
ns
Propagation Delay Time
(H L)*2
250
500
750
Propagation Delay Time
(L H)*2
VTHHL = 1.5 V, VTHLH = 2.0 V
tPLH
520
270
270
Propagation Delay
Difference
tPLHtPHL
200
650
650
Between Any 2 Parts
Pulse Width Distortion
(PWD)*2
tPHL-tPLH
Common Mode
TA = 25C, IF = 0 mA,
Transient Immunity at
High Level Output*3
CM
H
VO > 3.0 V, VCM = 1.5 kV,
RL = 20 k, CL = 100 pF
15
kV/s
kV/s
Common Mode
Transient Immunity at
Low Level Output*3
TA = 25C, IF = 10 mA,
VO < 1.0 V, VCM = 1.5 kV,
RL = 20 k, CL = 100 pF
CM
L
－15
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 5 of 15
PS9113
Notes*: 1. Typical values at TA = 25°C.
2. Test circuit for propagation delay time
I
F
(ON)
(ON)
Input
V
CC = 15 V
Pulse input (I
F
= 10 mA)
s,
50% I
F
0.1 F
RL = 20 k
(PW = 10
V (Monitor)
C = 100 pF
O
Duty cycle = 1/10)
15 V
L
Output
Input
V
V
THLH = 2.0 V
(Monitor)
VTHHL = 1.5 V
47
OL
tPHL
tPLH
CL includes probe and stray wiring capacitance.
3. Test circuit for common mode transient immunity
1.5 kV
90%
10%
VCM
V
CC = 15 V
SW I
A
F
0 V
0.1 F
R
L
L
= 20 k
tr
tf
V (Monitor)
O
B
C
= 100 pF
V
O
15 V
3.0 V
(Switch A: I
F
F
= 0 mA)
1.0 V
VO
V
OL
VCM
(Switch B: I
= 10 mA)
CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between the
leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
4. Do not use adhesives or coating materials including halogens to fix this device.
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 6 of 15
PS9113
TYPICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
SUPPLY CURRENT vs. AMBIENT TEMPERATURE
1200
5
4
3
2
Vcc = 15 V
Vo = 0.8 V
Io = 0.75 mA
I
CCL
CCH
1000
800
600
400
200
0
I
Vcc = 20 V
Vo = Open
1
0
ICCH : VF = 0.8 V
I
CCL : I
F
= 10 mA
-50
-25
0
25
50
75
(°C)
100
-50
-25
0
25
50
75
100
Ambient Temperature T
A
Ambient Temperature TA (°C)
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
OUTPUT CURRENT vs. FORWARD CURRENT
16
0.6
100 °C
Vcc = 15 V
= 10 mA
Io = 2.4 mA
14
IF
0.5
0.4
0.3
0.2
0.1
12
25 °C
10
8
Ta = –40 °C
6
4
2
0
Vo = 0.6 V
0
0
5
10
15
20
-50
-25
0
25
50
75
(°C)
100
Ambient Temperature T
A
Forward Current I
F
(mA)
PROPAGATION DELAY TIME,
PROPAGATION DELAY DIFFERENCE
vs. FORWARD CURRENT
OUTPUT CURRENT vs.
AMBIENT TEMPERATURE
600
500
400
1.10
1.00
0.90
0.80
0.70
0.60
I
F
= 10 mA
t
PLH
Vo = 0.6 V
tPLH-tPHL
300
200
100
0
t
PHL
Vcc = 15 V
C
R
L
= 100 pF
= 20 KΩ
L
-50
-25
0
25
50
75
(°C)
100
0
5
10
15
20
25
Ambient Temperature T
A
Forward Current IF (mA)
Remark The graphs indicate nominal characteristics.
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 7 of 15
PS9113
PROPAGATION DELAY TIME,
PROPAGATION DELAY DIFFERENCE
vs. SUPPLY VOLTAGE
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
1800
1600
600
500
400
300
200
100
0
t
PLH
IF = 10 mA
C
R
L
= 100 pF
= 20 KΩ
L
1400
1200
1000
800
PWD
PHL
t
600
400
200
0
t
PLH
I
F
= 10 mA
Vcc = 15 V
C
R
t
PHL
L
L
= 100 pF
= 20 KΩ
tPLH-tPHL
0
10
20
30
500
25
-40 -20
0
20
40
60
(°C)
80
100
Supply Voltage Vcc (V)
Ambient Temperature T
A
PROPAGATION DELAY TIME,
PROPAGATION DELAY DIFFERENCE
vs. LOAD RESISTANCE
PROPAGATION DELAY TIME
vs. LOAD CAPACITANCE
1600
1400
1200
1000
800
600
400
200
0
1000
800
600
400
200
0
I
F
= 10 mA
Vcc = 15 V
= 20 KΩ
I
F
= 10 mA
Vcc = 15 V
= 100 pF
tPLH
t
PLH
R
L
C
L
t
PLH-tPHL
t
PHL
t
PHL
0
10
20
30
40
50
0
100
200
300
400
(pF)
Load Capacitance C
L
Load Resistance R
L
(KΩ)
PROPAGATION DELAY TIME,
PROPAGATION DELAY DIFFERENCE
vs. LOAD RESISTANCE
500
IF
= 10 mA
Vcc = 5 V
= 15 pF
tPLH
400
300
C
L
t
PLH-tPHL
200
100
0
t
PHL
0
5
10
15
20
Load Resistance R
L
(KΩ)
Remark The graphs indicate nominal characteristics.
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 8 of 15
PS9113
TAPING SPECIFICATIONS (UNIT: mm)
Tape Direction
5pin SOP
Outline and Dimensions (Tape)
2.0±0.05
4.0±0.1
+0.1
–0
3.45 MAX.
1.5
1.55±0.1
3.0±0.1
3.9±0.1
8.0±0.1
0.3±0.05
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
f
f
21.0±0.8
13.5±1.0
17.5±1.0
Packing: 2 500 pcs/reel
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 9 of 15
PS9113
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.45
6.25
【
5pin SOP
】
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 10 of 15
PS9113
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
•
•
•
•
•
•
Peak reflow temperature
Time of peak reflow temperature
Time of temperature higher than 220C
Time to preheat temperature from 120 to 180C 12030 s
Number of reflows
Flux
260C or below (package surface temperature)
10 seconds or less
60 seconds or less
Three
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
Temperature
Time
260C or below (molten solder temperature)
10 seconds or less
Preheating conditions 120C or below (package surface temperature)
Number of times
Flux
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
Peak Temperature (lead part temperature) 350C or below
Time (each pins)
3 seconds or less
Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100C
(4) Cautions
Fluxes
Avoid removing the residual flux with freon-based and halogens-based (chlorine-based) cleaning solvent .
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 11 of 15
PS9113
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-
emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum
ratings.
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 12 of 15
PS9113
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Rating
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
40/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
UIORM
Upr
707
1131
Vpeak
Vpeak
Upr = 1.6 UIORM, Pd 5 pC
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM, Pd 5 pC
Upr
1 326
Vpeak
Vpeak
Highest permissible overvoltage
U
IOTM
6 000
2
Degree of pollution (DIN EN 60664-1 VDE 0110 Part 1)
Comparative tracking index ((IEC 60112/DIN EN 60112 (VDE 0303 Part
11))
CTI
175
Material group (DIN EN 60664-1 VDE 0110 Part 1)
Storage temperature range
III a
Tstg
TA
–55 to +125
–40 to +100
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Tsi
Isi
Psi
150
200
300
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
Ω
Dependence of maximum safety ratings with package temperature
1000
900
800
700
600
500
400
Psi: Total Power Dissipation
300
200
100
Isi: Input Current
0
0
25
50
75 100 125 150 175 200
Package temp Tsi (°C)
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 13 of 15
PS9113
Method a) Destructive Test, Type and Sample Test
UIOTM =6000V
V
Upr =1131V
UIORM =707V
t3
tm
t4
t
tini
t2
t1
ttest
t1,t2 = 1 to 10 sec
t3,t4 = 1 sec
tm(PARTIAL DISCHARGE)= 10 sec
ttest = 12 sec
tini = 60 sec
Method b) Non-destructive Test, 100% Production Test
=1326V
U
pr
V
U
IORM
=707V
t
test
t
t
tm
t
3
4
t ,t = 0.1 sec
3 4
t
t
= 1.0 sec
m(PARTIAL DISCHARGE)
= 1.2 sec
test
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 14 of 15
PS9113
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or i any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
R08DS0124EJ0301 Rev.3.01
Oct 29, 2018
Page 15 of 15
Notice
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation or any other use of the circuits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by
you or third parties arising from the use of these circuits, software, or information.
2. Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights, or other intellectual property rights of third parties, by or
arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application
examples.
3. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others.
4. You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by
you or third parties arising from such alteration, modification, copying or reverse engineering.
5. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The intended applications for each Renesas Electronics product depends on the
product’s quality grade, as indicated below.
"Standard":
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; industrial robots; etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key financial terminal systems; safety control equipment; etc.
Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are
not intended or authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause
serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all
liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or
other Renesas Electronics document.
6. When using Renesas Electronics products, refer to the latest product information (data sheets, user’s manuals, application notes, “General Notes for Handling and Using Semiconductor Devices” in the
reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation
characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified
ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a
certain rate and malfunctions under certain use conditions. Unless designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas
Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily injury, injury
or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult
and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and
sufficiently investigating applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics
products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable
laws and regulations.
9. Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws
or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or
transactions.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third
party in advance of the contents and conditions set forth in this document.
11. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
(Rev.4.0-1 November 2017)
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
California Eastern Laboratories, Inc.
4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A.
Tel: +1-408-919-2500, Fax: +1-408-988-0279
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-651-700, Fax: +44-1628-651-804
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 1709 Quantum Plaza, No.27 ZhichunLu, Haidian District, Beijing, 100191 P. R. China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, 200333 P. R. China
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HAL 2nd Stage, Indiranagar, Bangalore 560 038, India
Tel: +91-80-67208700, Fax: +91-80-67208777
Renesas Electronics Korea Co., Ltd.
17F, KAMCO Yangjae Tower, 262, Gangnam-daero, Gangnam-gu, Seoul, 06265 Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5338
© 2018 Renesas Electronics Corporation. All rights reserved.
Colophon 7.0
相关型号：
PS9113-V-F3
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER
NEC
PS9113-V-F3
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP (SO-5) PHOTOCOUPLER
CEL
PS9113-V-F3-A
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP (SO-5) PHOTOCOUPLER
CEL
PS9113-V-F3-AX
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE DRIVE 5-PIN SOP (SO-5) PHOTOCOUPLER
RENESAS
PS9113-V-F3-AX
Logic IC Output Optocoupler, 1-Element, 3750V Isolation, 1MBps, LEAD FREE, PLASTIC, SOP-5
NEC
PS9113-V-F3-AX
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP (SO-5) PHOTOCOUPLER
CEL
PS9113-V-F4
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER
NEC
PS9113-V-F4
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP (SO-5) PHOTOCOUPLER
CEL
PS9113-V-F4-A
1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP (SO-5) PHOTOCOUPLER
CEL
©2020 ICPDF网 联系我们和版权申明