PS9801 [RENESAS]
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, LEAD FREE, SSOP-8;型号: | PS9801 |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, LEAD FREE, SSOP-8 输出元件 光电 |
文件: | 总10页 (文件大小:188K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
PRELIMINARY DATA SHEET
PHOTOCOUPLER
PS9801
0.6 A OUTPUT CURRENT, HIGH CMR
IGBT GATE DRIVE
8-PIN SSOP (SO-8) PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS9801 is an optically coupled isolator containing a GaAlAs LED on the input side and a photo diode, a signal
processing circuit and a power output transistor on the output side on one chip.
The PS9801 is designed specifically for high common mode transient immunity (CMR) and high switching speed. It
is suitable for driving IGBTs and MOS FETs.
FEATURES
PIN CONNECTION
•
•
•
•
Peak output current (0.6 A MAX., 0.4 A MIN.)
High speed switching (tPLH, tPHL = 0.65 μs MAX.)
High common mode transient immunity (CMH, CML = 25 kV/μs MIN.)
Pb-Free product
(Top View)
8
7
6
5
1. NC
2. Anode
3. Cathode
4. NC
5. VEE
APPLICATIONS
6. V
O
•
•
•
IGBT, Power MOS FET Gate Driver
Industrial inverter
7. NC
8. VCC
1
2
3
4
IH (Induction Heating)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10745EJ01V0DS (1st edition)
Date Published January 2009 NS
Printed in Japan
2009
PS9801
PACKAGE DIMENSIONS (UNIT: mm)
5.21 0.25
6.0 0.2
3.95 0.1
0.5 0.3
1.27
+0.10
0.10 S
0.25 M
0.4
–0.05
2
Preliminary Data Sheet PN10745EJ01V0DS
PS9801
FUNCTIONAL DIAGRAM
8
(Tr. 1)
(Tr. 2)
2
3
6
5
SHIELD
Tr. 2
LED
ON
Tr. 1
ON
Output
Input
H
OFF
ON
H
L
OFF
OFF
L
MARKING EXAMPLE
Type Number
Assembly Lot
9801
NT931
N
N T 9 31
Week Assembled
Year Assembled
(Last 1 Digit)
No. 1 pin Mark
Initial of NEC
(Engraved mark)
In-house Code
Rank Code
3
Preliminary Data Sheet PN10745EJ01V0DS
PS9801
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
25
Unit
mA
A
Diode
Forward Current
Peak Transient Forward
IF (TRAN)
1.0
Current (Pulse Width < 1 μs)
Reverse Voltage
VR
PD
5
45
V
mW
A
Power Dissipation*1
Detector High Level Peak Output
Current*2
IOH (PEAK)
0.6 (MAX.)
Low Level Peak Output
Current*2
IOL (PEAK)
0.6 (MAX.)
A
Supply Voltage
Output Voltage
(VCC - VEE)
0 to 35
0 to VCC
250
V
V
VO
PC
BV
f
Power Dissipation*3
mW
Vr.m.s.
kHz
°C
Isolation Voltage*4
3 750
Operating Frequency*5
Operating Ambient Temperature
Storage Temperature
25
TA
Tstg
−40 to +100
−55 to +125
°C
*1 Reduced to 1.5 mW/°C at TA = 80°C or more.
*2 Maximum pulse width = 10 μs, Maximum duty cycle = 0.2%
*3 Reduced to 4.1 mW/°C at TA = 60°C or more.
*4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
*5 IOH (PEAK) ≤ 0.4 A (≤ 2.0 μs), IOL (PEAK) ≤ 0.4 A (≤ 2.0 μs)
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage
Symbol
(VCC - VEE)
IF (ON)
MIN.
10
TYP.
MAX.
30
Unit
V
Forward Current (ON)
8
12
mA
V
Forward Voltage (OFF)
VF (OFF)
TA
−2
0.8
Operating Ambient Temperature
−40
100
°C
4
Preliminary Data Sheet PN10745EJ01V0DS
PS9801
ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 10 to 30 V, IF (ON) = 8 to 12 mA,
VF (OFF) = −2 to 0.8 V, VEE = GND, unless otherwise specified)
Parameter
Symbol
Conditions
IF = 10 mA, TA = 25°C
MIN.
1.2
TYP.*1
1.56
MAX.
1.9
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
VF
IR
VR = 3 V, TA = 25°C
f = 1 MHz, VF = 0 V, TA = 25°C
VO = (VCC − 4 V)*2
10
μA
pF
A
Ct
30
Detector High Level Output Current
IOH
0.2
0.4
0.2
0.4
VO = (VCC − 10 V)*3
VO = (VEE + 2.5 V)*2
VO = (VEE + 10 V)*3
IO = −100 mA*4
0.6
0.5
0.6
Low Level Output Current
IOL
A
High Level Output Voltage
Low Level Output Voltage
High Level Supply Current
Low Level Supply Current
VOH
VOL
ICCH
ICCL
IFLH
VCC − 4.0 VCC − 1.8
V
IO = 100 mA
0.4
0.8
1.4
1.0
3.0
3.0
6.0
V
VO = open, IF = 10 mA
VO = open, IF = 0 mA
IO = 0 mA, VO > 5 V
mA
mA
mA
Coupled Threshold Input Current
(L → H)
Threshold Input Voltage
VFHL
CI-O
IO = 0 mA, VO < 5 V
0.8
V
(H → L)
Isolation Capacitance
f = 1 MHz, VF = 0 V, TA = 25°C
30
pF
*1 Typical values at TA = 25°C.
*2 Maximum pulse width = 50 μs, Maximum duty cycle = 0.5%.
*3 Maximum pulse width = 10 μs, Maximum duty cycle = 0.2%
*4 VOH is measured with the DC load current in this testing.
5
Preliminary Data Sheet PN10745EJ01V0DS
PS9801
SWITCHING CHARACTERISTICS (TA = −40 to +100°C, VCC = 10 to 30 V, IF (ON) = 8 to 12 mA,
VF (OFF) = −2 to 0.8 V, VEE = GND, unless otherwise specified)
Parameter
Symbol
tPLH
Conditions
MIN.
0.05
0.05
TYP.*1
0.2
MAX.
0.65
0.65
0.5
Unit
μs
Propagation Delay Time (L → H)
Propagation Delay Time (H → L)
Pulse Width Distortion (PWD)
IF = 10 mA,
Rg = 47 Ω, Cg = 3 nF, f = 10 kHz,
tPHL
0.3
μs
|tPHL−tPLH| Duty Cycle = 50%*2
μs
Propagation Delay Time (Difference
Between Any Two Products)
tPHL−tPLH
−0.5
0.5
μs
Rise Time
Fall Time
tr
tf
50
50
ns
ns
Common Mode Transient Immunity at
High Level Output*3
|CMH| TA = 25°C, IF = 10 mA, VCC = 30 V,
25
25
kV/μs
VO (MIN.) = 26 V, VCM = 1.5 kV
Common Mode Transient Immunity at
Low Level Output*3
|CML|
TA = 25°C, IF = 0 mA, VCC = 30 V,
kV/μs
VO (MAX.) = 1 V, VCM = 1.5 kV
*1 Typical values at TA = 25°C.
*2 This load condition is equivalent to the IGBT load at 1 200 V/25 A.
*3 Connect pin 1 and pin 4 to the LED common.
6
Preliminary Data Sheet PN10745EJ01V0DS
PS9801
•
The information in this document is current as of January, 2009. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
7
Preliminary Data Sheet PN10745EJ01V0DS
PS9801
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
相关型号:
PS9814-1-A
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
CEL
PS9814-1-F3
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
CEL
PS9814-1-F3-A
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
CEL
PS9814-1-F4
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
CEL
PS9814-1-F4-A
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
CEL
PS9814-1-V
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
CEL
©2020 ICPDF网 联系我们和版权申明