RKT102***MH [RENESAS]
レ-Chip (RFID); レ片内（ RFID）
| 型号： | RKT102***MH |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | レ-Chip (RFID) |
| 文件： | 总10页 (文件大小：160K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RKT102***MH
µ-Chip (RFID)
REJ03P0007-0100
Rev.1.00
Feb 23, 2007
Overview
•
•
RKT102***MH is RFID (Radio Frequency Identification) for 2.45 GHz.
It has a unique ID inside, then it is applicable for management of individual object.
Feature
•
•
•
•
•
Thin and small package: COA (Chip on Aluminum)
Including unique µ-Chip ID which is not alterable
Including a unique ID
Communication without contact
Including a congestion control function
Note: "µ-Chip" and the µ-Chip Logo are either registered Trademarks or Trademarks of Hitachi,Ltd. in Japan and in
other countries.
Rev.1.00 Feb 23, 2007 page 1 of 9
RKT102***MH
Order Part No.
Order Part No.
Unit of Packaging
Packing Form
Reel
Unit of Order
87,000
Note
RKT102***MH
8,000 min
Outline and Mark
Outline
Mark
First three digits indicate ROM code.
Rev.1.00 Feb 23, 2007 page 2 of 9
RKT102***MH
Absolute Maximum Ratings
Specification
Item
Symbol
Unit
Condition
Remark
Min
–30
0
Typ
—
Max
75
Storage temperature
Ambient operation temperature
Received power
Tstg
Ta
°C
°C
25
—
40
No condensation
Pr
—
13.8
dBm
Electrical Characteristics
Measurement conditions:
Unless otherwise specified, Ta = 25°C, fc = 2.402 to 2.421 GHz, reader power = 200 mW
Single-patch antenna, linearity polarized waves
Period of reading operations: 4 clock cycles, number of read bits: 128 bits
Specification
Item
Unit
Condition
Remark
Min
6.5
—
Typ
—
Max
23
Note4
Note1
Communication distance
cm
—
Note2, Note3
µ-Chip ID Check
Passed
—
EDC Check
Notes: 1. The distance at which the read µ-Chip ID value matches the indicated value and the EDC check is passed.
2. Verification value calculated from the read µ-Chip ID value.
3. Detail data of µ-Chip ID is describe on the commodity specification.
4. Relation between the inlet and antenna positions;
The planes of the metal-foil pattern for the antenna and the antenna itself should be parallel, the center of the
inlet should be on the line that passes through the center of the antenna plane, and the inlet metal-foil
pattern's longer side should be within the antenna's plane of polarization.
Reader Specifications and Type No.: HE-MU-380-SH14
Item
Operation temperature
Carrier frequency
Power
Symbol
Ta
Specification
Unit
°C
Remarks
25
fc
2.402 to 2.421
GHz
mW
Clock
Bits
—
Pw
200
4
Data read cycle
Tfm
Nb
Data read bit count
Congestion control function
128
Action
—
Cable Specifications
Item
Cable material
Symbol
Specification
semi-rigid
20
Unit
—
Remarks
Remarks
—
L
Total length of cable
cm
Antenna Specifications and Type No.: PA1-2450ASA
Item
Operation temperature
Polarization
Symbol
Specification
Unit
°C
Ta
—
—
—
25
Linear
—
Number of patches
Gain
1
6
pcs
dBi
Rev.1.00 Feb 23, 2007 page 3 of 9
RKT102***MH
Dimension of Inlet Outline
Tape Dimensions
The products, each of which consists of an antenna and chip, are aligned and mounted on tape as shown in the figure
below.
The chip-mounting section is punched through if the chip is defective.
70.0 ± 0.6
All dimensions: mm
54.0 ± 0.25
Antenna
2.375 ± 0.05
Recognition mark:
" (square) type
"
Recognition mark:
" " (cross) type
1.5
29.0
31.5
34.4
Section A
1.5
1.5 ± 0.25
Note: Dimensional tolerance is ± ±0.2 mm unless otherwise specified.
Details for Section A
Chip-mounting section
(Area of sealant coverage is less than φ1.5 mm)
Punched hole for defective part: φ2.0 mm (Typ)
Deformations that require punching twice or
more are passed over
Rev.1.00 Feb 23, 2007 page 4 of 9
RKT102***MH
Leader and Trailer Sections
This product includes leader and trailer sections that precede and follow the product section, i.e. the section that carries
the chips, as shown in the figure below.
Splicing tape (polyester)
All dimensions: mm
Thickness: 0.055 mm
2000 ± 200
Leader section (PET)
10.0 ± 0.5
Punched hole for defective part
a) First Part Unwound
Splicing tape (polyester)
Thickness: 0.055 mm
2000 ± 200
Trailer section (PET)
10.0 ± 0.5
Punched hole for defective part
b) Final Part Unwound
Punched Holes for Defective Part
Chips of defective parts will be punched through with the hole size of φ2.0 mm.
Rev.1.00 Feb 23, 2007 page 5 of 9
RKT102***MH
Jointed Segments of Tape
This product may include splices, where two tapes are pasted together, as shown below.
The number of splices is no more than 5 per reel (excluding the attachment of leader/trailer tapes Note).
Products covered by the splicing tape will be punched through as defective parts.
A
Splicing tape (polyester)
Thickness: 0.055 mm
Punched hole for defective part
B
D
C
Tape on both sides
Dimension
Description
Specification
2.375 ± 0.2 mm
± 0.2 mm
A
B
C
D
The antenna pitch at spliced part
Misalignment at spliced point
Splicing tape width
10.0 ± 0.5 mm
< 0.5 mm
Overflow of splicing tape
Note: If leader/trailer parts are broken or spoiled by creases, the tape will be cut and jointed again.
The attachment of leader/trailer will not be punched through as defective parts.
Rev.1.00 Feb 23, 2007 page 6 of 9
RKT102***MH
Packing Specifications
Packing Specifications and Quantity
(1) As shipped, this product is packed in reel.
(2) Quantity is 8,000 good pieces/reel Min. Note
(3) Quantity of punched hole for defective part is 20% or less of total quantity of antenna.
Note: Tapes can be joined to increase the quantity.
Example of Labeling
(9)
Pb-Free T.
2006/03/06
(10)
(1)
(2)
(3)
(4)
PID 06100P10CV-001
D/N RKZ6.8TKJR1
QTY 8000
(7)
SPN RKZ6.8TKJR1 ZZZZ
WP MADE IN JAPAN T/C 6C2 FL90030E0
AS MADE IN JAPAN S.LOT FL90030E0
(5)
(6)
(8)
(1) Pack-ID
(2) Device Name
Note: Indicate "Q" the end of a device name only in the
case of direct sale in Malaysia
(3) Quantity
(4) SAP Name
(5) Country of Wafer Process
(6) Country of Assembly
Japan → MADE IN JAPAN
Malaysia → MADE IN MALAYSIA
(7) Trace code
(8) Lot code
(9) Pb-Free indication (Only for Pb-free product)
(10) Date of Label issuance
Rev.1.00 Feb 23, 2007 page 7 of 9
RKT102***MH
Form of Delivery
(1) Paper tape for spacers
Paper tape is inserted as a spacer for the product tape.
When wound onto the reel, the product tape is oriented so that the antenna face is on the inner side.
All dimensions: mm
Paper tape
22
16
71
22
Leader
Reel
Antenna face is the inner side
Product-tape winding direction
Paper tape (material: kraft paper)
(2) Packing and reel dimensions
All dimensions: mm
1.6 ± 0.5 72 ± 0.6
φ76.2 ± 0.6
Material: cardboard
External View of the Reel
Antistatic bag
Label (On bag)
Label (On reel)
Cellophane tape
Inner packing box
Packing Form
Rev.1.00 Feb 23, 2007 page 8 of 9
RKT102***MH
Appearance
There should not be any scratch or/and dirt that affect characteristics.
Quality Level
(Compliant with the JIS Z 9015)
Electrical characteristics: AQL = 4.0%
Appearance: AQL = 4.0%
Precautions on Usage
1. Renesas Technology does not guarantee the product characteristics after it has been through assembly on the
customer side.
2. Please refer to the mounting manual. (Document No.: REJ11P0007-0100)
3. As for the structure of this product, resist on the surface of a metallic antenna is lost compared with past COA goods.
It wishes the examination of reliability when using it.
4. There is a sign in the aluminum part for the edge on both sides of the antenna tape of this product. It is likely to be
going to change without a previous notice in the future because this is the one for our shop floor control. There is
no problem in the product performance at all even if for instance, there is a display "RKT101".
System Outline
µ-Chip Inlet
Antenna
µ-Chip
Supply voltage / modulator
Clock demodulator
Logic circuit
128-bit ROM
Reader
Reset circuit
Function Blocks
Block Name
Description of Functions
Supply voltage/modulator
Generates power-supply voltage from carrier signals, varies the output impedance of the
modulator circuit to match the input impedance of the antenna, and handles
communications. The IC incorporates a power limiter for the protection of internal devices.
Reset circuit
Determines whether or not a clock signal is being supplied and cancels the reset mode in
synchronization with the first clock cycle.
Clock demodulator
Logic circuit
Demodulates the clock signal from the envelope signal of the received signal.
The IC includes a congestion control circuit and an on-chip 128-bit ROM from which data
signals are sent out in synchronization with the clock signal.
Rev.1.00 Feb 23, 2007 page 9 of 9
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
RENESAS SALES OFFICES
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0
相关型号：
©2020 ICPDF网 联系我们和版权申明