UPA867TS-T3-A-FB [RENESAS]
RF SMALL SIGNAL TRANSISTOR;型号: | UPA867TS-T3-A-FB |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | RF SMALL SIGNAL TRANSISTOR |
文件: | 总8页 (文件大小:181K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DATA SHEET
NPN SILICON + SiGe RF TWIN TRANSISTOR
µPA867TS
NPN SILICON + SiGe RF TRANSISTOR (WITH 2 DIFFERENT ELEMENTS)
IN A 6-PIN SUPER LEAD-LESS MINIMOLD (1007 PKG)
FEATURES
•
2 different built-in transistors (2SC5435, NESG2107M33)
Q1: High gain transistor
fT = 12.0 GHz TYP., S21e2 = 11 dB TYP. @ VCE = 3 V, IC = 10 mA, f = 2 GHz
Q2: Built-in low phase noise SiGe transistor suited for OSC applications
fT = 10.0 GHz TYP., S21e2 = 9.0 dB TYP. @ VCE = 1 V, IC = 5 mA, f = 2 GHz
6-pin super lead-less minimold package (1007 PKG)
•
BUILT-IN TRANSISTORS
Q1
2SC5435
−
Q2
Flat-lead 3-pin thin-type ultra super minimold part No.
3-pin super lead-less minimold part No.
−
NESG2107M33
ORDERING INFORMATION
Part Number
Order Number
Package
Quantity
Supplying Form
µPA867TS
µPA867TS-A
6-pin super lead-less
minimold package
(1007 PKG) (Pb-Free)Note
50 pcs
• 8 mm wide embossed taping
(Non reel)
• Pin 1 (Q1 Collector), Pin 6 (Q1 Base) face the
perforation side of the tape
µPA867TS-T3
µPA867TS-T3-A
10 kpcs/reel
Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact
your nearby sales office.
Remark To order evaluation samples, contact your nearby sales office.
The unit sample quantity is 50 pcs.
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
Document No. PU10423EJ02V0DS (2nd edition)
Date Published September 2005 CP(K)
Printed in Japan
The mark shows major revised points.
NEC Compound Semiconductor Devices, Ltd. 2003, 2005
µPA867TS
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameter
Symbol
Ratings
Unit
Q1
9
Q2
13
Collector to Base Voltage
Collector to Emitter Voltage
Emitter to Base Voltage
Collector Current
VCBO
VCEO
VEBO
IC
V
V
6
5
2
1.5
100
110
V
30
110
mA
mW
Note
Total Power Dissipation
Ptot
130 in 2 elements
150
Junction Temperature
Storage Temperature
Tj
°C
°C
Tstg
−65 to +150
Note Mounted on 1.08 cm2 × 1.0 mm (t) glass epoxy PCB
2
Data Sheet PU10423EJ02V0DS
µPA867TS
ELECTRICAL CHARACTERISTICS (TA = +25°C)
(1) Q1
Parameter
Collector Cut-off Current
Emitter Cut-off Current
DC Current Gain
Symbol
ICBO
Test Conditions
VCB = 5 V, IE = 0 mA
MIN.
−
TYP.
−
MAX.
Unit
nA
nA
−
100
100
150
−
IEBO
VEB = 1 V, IC = 0 mA
−
−
Note 1
hFE
VCE = 3 V, IC = 10 mA
75
10.0
7.0
−
110
12.0
11.0
1.5
Gain Bandwidth Product
Insertion Power Gain
Noise Figure
fT
VCE = 3 V, IC = 10 mA, f = 2 GHz
GHz
dB
dB
S21e2 VCE = 3 V, IC = 10 mA, f = 2 GHz
−
NF
VCE = 3 V, IC = 3 mA, f = 2 GHz,
ZS = Zopt
2.5
Note 2
Reverse Transfer Capacitance
Cre
VCB = 3 V, IE = 0 mA, f = 1 MHz
−
0.4
0.7
pF
(2) Q2
Parameter
Collector Cut-off Current
Emitter Cut-off Current
DC Current Gain
Symbol
ICBO
Test Conditions
VCB = 5 V, IE = 0 mA
MIN.
−
TYP.
−
MAX.
100
100
220
−
Unit
nA
IEBO
VEB = 0.5 V, IC = 0 mA
−
−
nA
Note 1
hFE
VCE = 1 V, IC = 5 mA
140
7.0
−
180
10.0
17.0
9.0
−
Gain Bandwidth Product (1)
Gain Bandwidth Product (2)
Insertion Power Gain (1)
Insertion Power Gain (2)
Associated Gain
fT
fT
VCE = 1 V, IC = 5 mA, f = 2 GHz
VCE = 1 V, IC = 20 mA, f = 2 GHz
GHz
GHz
dB
−
S21e2 VCE = 1 V, IC = 5 mA, f = 2 GHz
S21e2 VCE = 1 V, IC = 20 mA, f = 2 GHz
7.5
−
−
10.0
10.0
−
dB
Ga
VCE = 1 V, IC = 5 mA, f = 2 GHz,
ZS = Zopt
7.0
−
dB
Noise Figure
NF
VCE = 1 V, IC = 5 mA, f = 2 GHz,
ZS = Zopt
−
−
0.9
0.5
1.5
0.7
dB
pF
Note 2
Reverse Transfer Capacitance
Cre
VCB = 1 V, IE = 0 mA, f = 1 MHz
Notes 1. Pulse measurement: PW ≤ 350 µs, Duty Cycle ≤ 2%
2. Collector to base capacitance when the emitter grounded
hFE CLASSIFICATION
Rank
FB
xF
Marking
hFE Value of Q1
hFE Value of Q2
75 to 150
140 to 220
3
Data Sheet PU10423EJ02V0DS
µPA867TS
PACKAGE DIMENSIONS
6-PIN SUPER LEAD-LESS MINIMOLD (1007 PKG) (UNIT: mm)
0.9 0.05
0.7 0.05
(Top View)
Q1
C1
E1
C2
B1
E2
B2
1
6
5
4
2
3
Q2
PIN CONNECTIONS
1. Collector (Q1)
2. Emitter (Q1)
3. Collector (Q2)
4. Base (Q2)
5. Emitter (Q2)
6. Base (Q1)
4
Data Sheet PU10423EJ02V0DS
µPA867TS
When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority
having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license.
•
The information in this document is current as of September, 2005. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
•
•
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
•
•
•
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4-0110
5
Data Sheet PU10423EJ02V0DS
µPA867TS
For further information, please contact
NEC Compound Semiconductor Devices, Ltd.
http://www.ncsd.necel.com/
E-mail: salesinfo@ml.ncsd.necel.com (sales and general)
techinfo@ml.ncsd.necel.com (technical)
Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general)
TEL: +852-3107-7303
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120
FAX: +82-2-558-5209
FAX: +852-3107-7309
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
NEC Electronics (Europe) GmbH
http://www.ee.nec.de/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc.
TEL: +1-408-988-3500 FAX: +1-408-988-0279
http://www.cel.com/
0504
相关型号:
UPA867TS-T3FB-A
RF Small Signal Bipolar Transistor, 0.1A I(C), 2-Element, L Band, Silicon Germanium, NPN, LEAD FREE, SUPER LEADLESS MINIMOLD, 1007, 6 PIN
NEC
UPA868TS-A
RF Small Signal Bipolar Transistor, 0.03A I(C), 2-Element, S Band, Silicon Germanium, NPN, LEAD FREE, 1007, SUPER LEADLESS MINIMOLD PACKAGE-6
NEC
UPA868TS-T3-A
RF Small Signal Bipolar Transistor, 0.03A I(C), 2-Element, S Band, Silicon Germanium, NPN, LEAD FREE, 1007, SUPER LEADLESS MINIMOLD PACKAGE-6
NEC
UPA868TS-T3-A
2 CHANNEL, S BAND, SiGe, NPN, RF SMALL SIGNAL TRANSISTOR, LEAD FREE, 1007, SUPER LEADLESS MINIMOLD PACKAGE-6
RENESAS
UPA869TD
2 CHANNEL, L BAND, SiGe, NPN, RF SMALL SIGNAL TRANSISTOR, LEADLESS MINIMOLD, M16, 1208, 6 PIN
RENESAS
UPA869TD
RF Small Signal Bipolar Transistor, 0.1A I(C), 2-Element, L Band, Silicon Germanium, NPN, LEADLESS MINIMOLD, M16, 1208, 6 PIN
NEC
UPA869TD-T3
2 CHANNEL, L BAND, SiGe, NPN, RF SMALL SIGNAL TRANSISTOR, LEADLESS MINIMOLD, M16, 1208, 6 PIN
RENESAS
UPA869TD-T3FB
RF Small Signal Bipolar Transistor, 0.1A I(C), 2-Element, L Band, Silicon Germanium, NPN, LEADLESS MINIMOLD, M16, 1208, 6 PIN
NEC
UPA869TDFB
RF Small Signal Bipolar Transistor, 0.04A I(C), 2-Element, L Band, Silicon Germanium, NPN, M16, 1208, LEADLESS MINIMOLD PACKAGE-6
NEC
UPA869TDFB-A
RF Small Signal Bipolar Transistor, 0.04A I(C), 2-Element, L Band, Silicon Germanium, NPN, M16, 1208, LEADLESS MINIMOLD PACKAGE-6
NEC
UPA869TDFB-T3
RF Small Signal Bipolar Transistor, 0.04A I(C), 2-Element, L Band, Silicon Germanium, NPN, M16, 1208, LEADLESS MINIMOLD PACKAGE-6
NEC
©2020 ICPDF网 联系我们和版权申明