UPD800261F1-816-HN2-A [RENESAS]
32-BIT, 150MHz, RISC PROCESSOR, PBGA304, 19 X 19 MM, PLASTIC, LEAD FREE, FBGA-304;
| 型号： | UPD800261F1-816-HN2-A |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | 32-BIT, 150MHz, RISC PROCESSOR, PBGA304, 19 X 19 MM, PLASTIC, LEAD FREE, FBGA-304 时钟 外围集成电路 |
| 文件： | 总51页 (文件大小：556K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD800261
ERTEC 200
Enhanced Real-Time Ethernet Controller
with 32-bit RISC CPU Core
DESCRIPTION
ERTEC 200 is a powerful communication block for development of industrial Ethernet devices. ERTEC
200 contains a 32-bit RISC processor, an external memory interface with SDRAM and SRAM control-
ler, an LBU interface, a 2-channel real-time Ethernet interface with integrated PHYs, synchronous and
asynchronous serial ports, and general purpose I/Os. Its robust construction, specific automation func-
tions, and openness to the IT world are distinguishing features. The ERTEC 200 is housed in a 304-pin
plastic FBGA package (19 mm × 19 mm).
Detailed functions are described in the following user’s manual. Be sure to read this manual
when you design your systems.
User’s Manual ERTEC 200
: A17988EE2V0UM00
FEATURES
•
ARM946E-S core with max. 150 MHz
- 8 kBytes of instruction cache
- 4 kBytes of data cache
- 4 kBytes of D-TCM
- Memory protection unit
•
•
Local bus unit (LBU) with 16-bit data bus to
connect external host with access to internal
ERTEC 200 resources
IRT switch block with 2 Ethernet ports
(10/100 Mbps) supporting RT and IRT traffic
- integrated Ethernet PHYs
- autonegotiation, broadcast filter
- 64 kBytes internal communication SRAM
one UART (16550 like) and one SPI interface
two 32-bit timers with prescaler, one 16-bit
timer, one 32-bit F-timer and two watchdog
timers
Max. 45 GPIOs, partly usable as interrupts
- Max. 32 GPIOs, if LBU interface is used
Various configuration options selectable during
reset
- On-chip debug and trace functionality via
JTAG interface
- ETM9 embedded trace macrocell
- Interrupt controller for 16 IRQs and 8 FIQs
Internal Multilayer AHB bus running at 50 MHz
External memory interface (EMIF) supports up
to 128 MBytes of SDRAM and up to 64 MBytes
for static memories and I/O with 4 chip selects
Single-channel DMA controller for high-speed
memory-to-memory transfers and for serial
interface support
Integrated PLL to generate internal clocks for
ARM946E-S, AHB, APB and IRT switch
Predefined Boot ROM content supporting
different download sources
•
•
•
•
•
•
•
•
•
•
1.5 V (logic) and 3.3 V (I/O) power supply
Temperature range: TA = -40 to 85°C
Compact 304-pin plastic FBGA package
•
•
ORDERING INFORMATION
Device
Part Number
Package
ERTEC 200 µPD800261F1-816-HN2-A
P-FBGA304, 19 × 19 mm
Remark: Products with -A at the end of the part number are lead-free products.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative
for availability and additional information.
© NEC Electronics Corporation 2009
Document No. A17989EE2V0DS00
Data Published: November 2009
µPD800261
INTERNAL BLOCK DIAGRAM
4RACE
0ORT
ꢌꢇ -(Z
%XTERNAL -EMORY )NTERFACE
ꢏꢁ
*4!' ꢉ $EBUG
ꢏ
2%&?#,+
2ESET
#LOCK
5NIT
!2-ꢀꢁꢂ%ꢃ3
WITH
"3ꢃ
4!0
%XTERNAL
-EMORY
!2-
$-!
)ꢃ#ACHE ꢄꢅ K"YTESꢆ
$ꢃ#ACHE ꢄꢁ K"YTESꢆ
$ꢃ4#- ꢄꢁ K"YTESꢆ
ꢇꢈꢉꢊꢈꢈꢉꢊꢇꢈ -(Z
)NTERRUPT
#ONTROLLER
)NTERFACE
#ONTROLLER
%4-
ꢄ%-)&ꢆ
"OOT
2/-
!0"
ꢄꢋꢌ BITꢍ ꢇꢈ -(Zꢆ
-ASTER
ꢄꢅ K"YTESꢆ
3LAVE
3LAVE
3LAVE
-ASTER
)NPUT
STAGE
)NPUT
STAGE
-58ꢉ!RBꢎ
$ECODE
$ECODE
'0)/
5!24
!("ꢉ!0"
"RIDGE
'0)/ꢍ
5!24ꢍ
30)ꢍ
4IMERꢍ
7ATCHDOGꢍ
-#?0,,
-ULTILAYER !("
ꢄꢋꢌ BITꢍ ꢇꢈ -(Zꢆ
)NPUT
STAGE
)NPUT
STAGE
-58ꢉ!RBꢎ
30)ꢊ
)NTERFACE
-ASTER
3LAVE
!("ꢃ
7RAPPER
!("ꢃ
7RAPPER
3LAVE
-ASTER
-#ꢃ"US ꢄꢋꢌ BITꢍ ꢇꢈ -(Zꢆ
3#ꢃ"US ꢄꢋꢌ BITꢍ ꢇꢈ -(Zꢆ
ꢋ X 4IMERꢍ
7ATCHDOGꢍ
&ꢃ4IMER
-ASTER
#OMMUNIꢃ
CATION
,OCAL
"US 5NIT
ꢄ,"5ꢆ
3WITCH #ONTROL
32!-
3YSTEM
#ONTROL
ꢄꢂꢁ K"YTESꢆ
ꢄꢊꢂ BITꢆ
2EGISTERS
%THERNET
#HANNEL
ꢄ0ORT ꢈꢆ
%THERNET
#HANNEL
ꢄ0ORT ꢊꢆ
)24
3WITCH
-ACRO
0(9
ꢄ0ORT ꢈꢆ
0(9
ꢄ0ORT ꢊꢆ
-58
-$) ꢄ0ORT ꢈꢆ
-$) ꢄ0ORT ꢊꢆ
,OCAL "USꢍ
'0)/ꢍ %4-ꢍ -))
Data Sheet A17989EE2V0DS00
2
µPD800261
PIN IDENTIFICATION
(1/2)
A(23:0)
: Address bus
SPI1_SSPRXD
SPI1_SSPTXD
SPI1_SCLKOUT
SPI1_SFRMOUT
SPI1_SFRMIN
SPI1_SCLKIN
: SPI receive data
D(31:0)
: Data bus
: SPI transmit data
: SPI clock out
WR_N
: Write strobe
: Read strobe
: Clock to SDRAM
RD_N
: SPI serial frame output
: SPI serial frame input
: SPI clock in
CLK_SDRAM
BE(3:0)_DQM(3:0)_N : Byte enable
CS_SDRAM_N
RAS_SDRAM_N
CAS_SDRAM_N
: Chip select to SDRAM
SPI1_SSPCTLOE
: SPI clock and serial frame
output enable
: Row address strobe to
SDRAM
SPI1_SSPOE
TXD_P(2:1) 0
: SPI output enable
: Column address strobe to
SDRAM
: MII transmit data bit 0
WE_SDRAM_N
CS_PER(3:0)_N
RDY_PER_N
DTR_N
: RD/WR SDRAM
: Chip select
TXD_P(2:1) 1
TXD_P(2:1) 2
TXD_P(2:1) 3
RXD_P(2:1) 0
: MII transmit data bit 1
: MII transmit data bit 2
: MII transmit data bit 3
: MII receive data bit 0
: Ready signal
: Direction signal for external
driver or scan clock
OE_DRIVER_N
: Enable signal for external
driver or scan clock
RXD_P(2:1) 1
: MII receive data bit 1
BOOT(3:0)
CONFIG(6:1)
GPIO(44:0)
UART-TXD
: Boot mode
RXD_P(2:1) 2
RXD_P(2:1) 3
TX_EN_P(2:1)
TX_ERR_P(2:1)
RX_ER_P(2:1)
CRS_P(2:1)
: MII receive data bit 2
: MII receive data bit 3
: MII transmit enable
: MII transmit error
: MII receive error
: System configuration
: GPIO pins
: UART transmit data output
: UART receive data input
UART-RXD
UART-DCD_N
: UART carrier detection
signal
: MII carrier sense
UART-DSR_N
UART-CTS_N
: UART data set ready signal
RX_DV_P(2:1)
COL_P(2:1)
: MII receive data valid
: MII collision
: UART transmit enable
signal
LBU_A(20:0)
LBU_D(15:0)
LBU_WR_N
: LBU address bus
: LBU data bus
RX_CLK_P(2:1)
TX_CLK_P(2:1)
SMI_MDC
: MII receive clock
: MII transmit clock
: LBU write control
: LBU read control
: LBU byte enable
: LBU page selection
: LBU interrupt request
: LBU ready signal
: MII SMI clock
LBU_RD_N
SMI_MDIO
RES_PHY_N
P(2:1)TxP
: MII SMI input/output
: Reset to PHY
LBU_BE(1:0)_N
LBU_SEG_(1:0)
LBU_IRQ_(1:0)_N
LBU_RDY_N
LBU_CS_M_N
: Differential transmit output
: Differential transmit output
: Differential receive input
: Differential receive input
P(2:1)TxN
P(2:1)RxP
: LBU chip select to ERTEC
200 internal resources
P(2:1)RxN
LBU_CS_R_N
: LBU chip select to page
configuration registers
P(2:1)TDxP
: FX differential transmit out-
put
Data Sheet A17989EE2V0DS00
3
µPD800261
(2/2)
: Debug request to ARM9
P(2:1)TDxN
: FX differential transmit out-
put
DBGREQ
P(2:1)RDxP
: FX differential receive input
: FX differential receive input
: FX differential SD input
: FX differential SD input
: Reference resistor 12.4 kΩ
: PHY LED
DBGACK
TAP_SEL
CLKP_A
: Debug acknowledge
: Select TAP controller
: Quartz connection
: Quartz connection
: Reference clock output
: Clock for F-counter
: Power On reset
P(2:1)RDxN
P(2:1)SDxP
P(2:1)SDxN
CLKP_B
EXTRES
REF_CLK
F_CLK
P(2:1)DUPLEX-LED_N
P(2:1)LINK-LED_N
: PHY LED
RESET_N
WD_WDOUT0_N
P(2:1)-SPEED-100LED_N
(TX/FX)
: PHY LED
: Watchdog output
: PHY LED
VDD Core
: Power supply for core,
1.5 V
P(2:1)-SPEED-10LED_N
P(2:1)-RX-LED_N
P(2:1)-TX-LED_N
P(2:1)-ACTIVE-LED_N
PLL_EXT_IN_N
: PHY LED
GND Core
VDD IO
: GND for core
: PHY LED
: Power supply for IO, 3.3 V
: GND for IO
: PHY LED
GND IO
: MC_PLL input signal
PLL_AVDD
: Analog power supply for
PLL, 1.5 V
TGEN_OUT1_N
TRACEPKT(7:0)
: MC_PLL output signal
: Trace pins of ETM
PLL_AGND
: Analog GND for PLL
VDDQ (PECL)
: Power supply for PECL
buffers, 3.3 V
ETMEXTOUT
ETMEXTIN1
: ETM output signal
: ETM input signal
GND (PECL)
DVDD(4:1)
: GND for PECL buffers
: Digital power supply for
PHYs, 1.5 V
PIPESTA(2:0)
TRACESYNC
: Trace pipeline status
: Trace sync signal
DGND(4:1)
: Digital GND for PHYs
P(2:1)VDDARXTX
: Analog port Tx/Rx power
supply, 1.5 V
TRACECLK
TRST_N
TCK
: ETM trace or scan clock
: JTAG reset
P(2:1)VSSARX
: Analog port GND
P(2:1)VSSATX(2:1) : Analog port GND
: JTAG clock
VDDAPLL
: Analog central power sup-
ply, 1.5 V
TDI
: JTAG data in
VDDACB
: Analog central power sup-
ply, 3.3 V
TMS
TDO
: JTAG test mode select
: JTAG data out
VSSAPLLCB
VDD33ESD
: Analog central GND
: Analog test power supply,
3.3 V
SRST_N
: Hardware reset for debug
usage
GND33ESD
: Analog test GND
Data Sheet A17989EE2V0DS00
4
µPD800261
PIN CONFIGURATION
•
304-Pin Plastic FBGA (19 mm × 19 mm)
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
AA W U R N L J G E C A
AB Y V T P M K H F D B
INDEX MARK
(1/5)
Pin
Number
Pin
Pin Name
Pin Name
Number
A2
VDD IO
A21
B1
GND Core
A3
A1
GND IO
A4
WR_N
B2
A3
A5
CS_PER1_N
CS_PER2_N
GPIO26
B3
A2
A6
B4
A0
A7
B5
RD_N
A8
GND IO
B6
CS_PER3_N
RESET_N
A9
VDD IO
B7
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
VDD IO
B8
GPIO30
GPIO21/SPI1_SFRMOUT
GND IO
B9
GPIO25/TGEN_OUT1_N
GPIO27
B10
B11
B12
B13
B14
B15
B16
B17
B18
GPIO16/SPI1_SSPCTLOE
VDD IO
GPIO24/PLL_EXT_IN_N
GPIO18/SPI1_SSPRXD
F_CLK
REF_CLK
GPIO12/UART-CTS-N
GPIO9/UART-RXD
VDD IO
CLKP_A
GPIO13
GPIO10/UART-DCD-N
GPIO8/UART-TXD
GPIO4/P1-LINK-LED_N
GND IO
GPIO6/P1-RX-LED_N/P1-TX-LED_N/P1-ACTIVE-LED_N
Data Sheet A17989EE2V0DS00
5
µPD800261
(2/5)
Pin
Number
Pin
Number
Pin Name
Pin Name
B19
B20
B21
B22
C1
GPIO3/P2-SPEED-100LED_N/P2-SPEED-10LED_N
E13
E14
E15
E16
E17
E18
VDD Core
GPIO1/P2 -DUPLEX-LED_N
GPIO15/WD_WDOUT0_N
GPIO14/DBGACK
GPIO11/UART-DSR-N
GND Core
GND IO
VDD IO
A6
C2
A5
VDD Core
C21
C22
D1
P1TDxP
E19
E21
E22
F1
GNDNote
P1TDxN
P1RDxN
A8
P1RDxP
D2
A7
A12
D4
A4
F2
A11
D5
CS_PER0_N
F4
A20/CONFIG3
GND Core
VDD Core
D6
VDD Core
F5
D7
RDY_PER_N
F6
D8
OE_DRIVER_N
VDD Core
F7
GND Core
GND IO
D9
F8
D10
D11
D12
D13
D14
D15
D16
D17
D18
GPIO23/SPI1_SCLKIN
GPIO20/SPI1_SCLKOUT
VDD Core
F9
GPIO28
F10
F13
F14
F15
F16
F17
F18
F19
GPIO22/SPI1_SFRMIN/DBGACK
PLL_AGND
GPIO17/SPI1_SSPOE
GND IO
GPIO19/SPI1_SSPTXD
CLKP_B
GPIO7/P2-RX-LED_N/P2-TX-LED_N/P2-ACTIVE-LED_N
GPIO5/P2-LINK-LED_N
GPIO2/P1-SPEED-100LED_N/P1-SPEED-10LED_N
VDD Core
GND Core
VDD Core
GND (PECL)
P1SDxN
D19
D21
D22
E1
GPIO0/P1-DUPLEX-LED_N
VDDQ (PECL)
VDDQ (PECL)
A10
F21
F22
G1
GNDNote
VDD33ESD
A14
G2
A13
E2
A9
G4
A21/CONFIG4
GND IO
GND Core
DGND2
DVDD1
E4
A19/CONFIG2
VDD Core
G5
E5
G6
E6
GND Core
G17
G18
G19
G21
G22
H1
E7
DTR_N/BOOT0
GPIO31/DBGREQ
GPIO29
E8
P1SDxP
P1RxP
E9
E10
E11
E12
GND IO
P1RxN
GND Core
VDD IO
PLL_AVDD
H2
A15/BOOT1
Note: Connect to GND to improve heat dissipation; pins may as well be left open.
Data Sheet A17989EE2V0DS00
6
µPD800261
(3/5)
Pin
Number
Pin
Number
Pin Name
Pin Name
H4
H5
H6
A23/CONFIG6
A22/CONFIG5
GND IO
M4
WE_SDRAM_N
RAS_SDRAM_N
P2VSSATX1
M5
M18
H17
H18
H19
H21
H22
J1
GNDNote
GND33ESD
DVDD2
M19
M21
M22
N1
GNDNote
P2TxN
P2TxP
DGND1
VDD IO
D1
VDDACB
GND IO
N2
N4
BE0_DQM0_N
D20
J2
A16/BOOT2
BE2_DQM2_N
leave open
D18
N5
J4
N6
D21
J5
N17
N18
P2VSSARX
P2VDDARXTX
J6
J17
J18
P1VSSARX
GNDNote
N19
N21
GNDNote
GNDNote
J19
J21
J22
K1
P1VDDARXTX
P1TxN
N22
P1
P2
P4
P5
P6
GNDNote
D2
P1TxP
D3
A18/CONFIG1
A17/BOOT3
D16
D25
K2
BE3_DQM3_N
D22
K4
K5
K6
D17
D19
P17
P18
GNDNote
GNDNote
K17
K18
K19
P1VSSATX1
P1VSSATX2
VDDAPLL
P19
P21
P22
GNDNote
P2RxP
P2RxN
K21
GNDNote
R1
D4
K22
L1
GNDNote
R2
R4
R5
R6
R17
VDD Core
D26
CS_SDRAM_N
CAS_SDRAM_N
VDD Core
L2
D23
L4
D24
L5
GND Core
DGND3
L18
L19
L21
L22
M1
VSSAPLLCB
P2VSSATX2
EXTRES
R18
R19
R21
R22
T1
GNDNote
VDDQ (PECL)
DVDD4
DVDD3
GND IO
D5
leave open
CLK_SDRAM
D0
M2
T2
Note: Connect to GND to improve heat dissipation; pins may as well be left open.
Data Sheet A17989EE2V0DS00
7
µPD800261
(4/5)
Pin
Number
Pin
Number
Pin Name
Pin Name
LBU_D13/SMI_MDIO
T4
D27
V15
V16
V17
V18
V19
V21
T5
leave open
GND Core
DGND4
LBU_D14/RES_PHY_N
GND IO
T6
T17
T18
T19
VDD Core
GND (PECL)
GND (PECL)
P2SDxP
VDDQ (PECL)
T21
VDD Core
V22
GNDNote
T22
U1
GNDNote
D6
W1
D9
W2
D10
U2
D7
W4
D29
U4
D28
W5
D30
U5
GND IO
VDD Core
GND IO
VDD Core
TDI
W6
D31
U6
W7
TCK
U7
W8
TAP_SEL
U8
W9
LBU_A16/GPIO32
LBU_A17/GPIO33
LBU_A15/COL_P2
LBU_A19/GPIO35
VDD Core
U9
W10
W11
W12
W13
W14
W15
W16
W17
W18
W19
W21
W22
Y1
U10
U13
U14
U15
U16
U17
U18
U19
U21
U22
V1
TRST_N
LBU_SEG_1/GPIO38
LBU_CS_M_N/GPIO40
GND IO
LBU_D12/SMI_MDC
LBU_D1/TXD_P11
LBU_D15/GPIO41
VDD Core
GND Core
VDD Core
P2SDxN
leave open
P2RDxN
LBU_IRQ1_N/GPIO44
LBU_RDY_N/GPIO42
P2TDxN
P2RDxP
BE1_DQM1_N
D8
VDD IO
V2
VDD IO
V4
VDD Core
Y2
D11
V5
VDD Core
Y21
Y22
AA1
AA2
AA3
AA4
AA5
AA6
AA7
AA8
P2TDxP
V6
GND Core
VDD IO
V7
TMS
D12
V8
SRST_N
D13
V9
TDO
D15
V10
V11
V12
V13
V14
LBU_A18/GPIO34
GND Core
LBU_A1/RXD_P11/ETMEXTIN1
LBU_A2/RXD_P12/TRACEPKT7
LBU_A4/CRS_P1/TRACEPKT5
LBU_A6/RX_DV_P1/TRACEPKT3
LBU_A8/RXD_P20/TRACEPKT1
LBU_A20/GPIO36
LBU_SEG_0/GPIO37
GND Core
Note: Connect to GND to improve heat dissipation; pins may as well be left open.
Data Sheet A17989EE2V0DS00
8
µPD800261
(5/5)
Pin
Number
Pin
Number
Pin Name
Pin Name
AA9
LBU_A10/RXD_P22/TRACESYNC
AB5
AB6
AB7
AB8
AB9
LBU_A3/RXD_P13/TRACEPKT6
LBU_A5/RX_ER_P1/TRACEPKT4
LBU_A7/COL_P1/TRACEPKT2
LBU_A9/RXD_P21/TRACEPKT0
VDD IO
AA10 LBU_A11/RXD_P23/PIPESTA2
AA11 LBU_A13/RX_ER_P2/PIPESTA0
AA12 LBU_WR_N/TX_CLK_P1
AA13 LBU_BE1_N/RX_CLK_P2
AA14 LBU_D0/TXD_P10
AA15 VDD Core
AB10 LBU_A12/CRS_P2/PIPESTA1
AB11 LBU_A14/RX_DV_P2
AB12 LBU_CS_R_N/GPIO39
AB13 LBU_RD_N/TX_CLK_P2
AB14 LBU_BE0_N/RX_CLK_P1
AB15 VDD IO
AA16 LBU_D3/TXD_P13
AA17 LBU_D5/TX_ERR_P1
AA18 LBU_D7/TXD_P21
AA19 LBU_D9/TXD_P23
AA20 LBU_D10/TX_EN_P2
AA21 LBU_IRQ0_N/GPIO43
AA22 GND Core
AB16 LBU_D2/TXD_P12
AB17 LBU_D4/TX_EN_P1
AB18 LBU_D6/TXD_P20
AB19 LBU_D8/TXD_P22
AB20 VDD IO
AB2
AB3
AB4
D14
LBU_A0/RXD_P10/ETMEXTOUT
TRACECLK
AB21 LBU_D11/TX_ERR_P2
Data Sheet A17989EE2V0DS00
9
µPD800261
Table of Contents
1.
2.
Pin Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
List of Pin Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Pin Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Pin Status and Recommended Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
1.1
1.2
1.3
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
AC Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.1
2.2
2.3
2.4
2.4.1
Clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
I/O timing specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
LBU timing specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SPI timing specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Power-up sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Reset timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
2.4.2
2.4.3
2.4.4
2.4.5
2.4.6
3.
4.
Package Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Recommended Soldering Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Data Sheet A17989EE2V0DS00
10
µPD800261
List of Figures
Figure 2-1:
Figure 2-2:
Figure 2-3:
Figure 2-4:
Figure 2-5:
Figure 2-6:
Figure 2-7:
Figure 2-8:
Figure 2-9:
Figure 2-10:
Figure 2-11:
Figure 3-1:
Clock Waveforms ........................................................................................................ 35
Input Setup and Hold Waveforms ............................................................................... 37
Output Delay Waveforms ............................................................................................ 37
LBU Read from ERTEC 200 with Separate Read/Write line....................................... 39
LBU Write to ERTEC 200 with Separate Read/Write line ........................................... 40
LBU Read from ERTEC 200 with Common Read/Write line....................................... 41
LBU Write to ERTEC 200 with Common Read/Write line ........................................... 42
SPI Timing in Slave Mode (TI-format Example) .......................................................... 43
SPI Timing in Master Mode (TI-format Example) ........................................................ 44
Power-Up Sequence Timing Diagram......................................................................... 45
Reset Timing Diagram................................................................................................. 46
Package Drawing ........................................................................................................ 47
Data Sheet A17989EE2V0DS00
11
µPD800261
List of Tables
Table 1-1:
Table 1-2:
Table 1-3:
Table 1-4:
Table 1-5:
Table 1-6:
Table 1-7:
Table 1-8:
Table 1-9:
External Memory Interface Pin Functions....................................................................... 13
Local Bus Interface Pin Functions.................................................................................. 14
MII Diagnosis Interface Pin Functions............................................................................ 16
PHY Interface Pin Functions .......................................................................................... 17
General Purpose I/O Pin Functions................................................................................ 18
UART Pin Functions....................................................................................................... 19
SPI1 Pin Functions......................................................................................................... 19
MC_PLL Pin Functions................................................................................................... 19
Clock and Reset Pin Functions ...................................................................................... 20
Table 1-10: JTAG and Debug Interface Pin Functions...................................................................... 20
Table 1-11: Trace Port Pin Functions................................................................................................ 21
Table 1-12: Power Supply Pin Functions........................................................................................... 22
Table 1-13: Alternative Functions of GPIO(31:0) Pins....................................................................... 23
Table 1-14: Pin Characteristics.......................................................................................................... 24
Table 1-15: Pin Status During Reset and Recommended Connections............................................ 26
Table 1-16: Alternative Functions of LBU Interface Pins................................................................... 28
Table 2-1:
Table 2-2:
Table 2-3:
Table 2-4:
Table 2-5:
Table 2-6:
Table 2-7:
Table 2-8:
Table 2-9:
Absolute Maximum Ratings............................................................................................ 30
Recommended Operating Conditions ............................................................................ 31
Thermal Characteristics of Package............................................................................... 33
Clock AC Characteristics................................................................................................ 34
I/O Timing Specifications................................................................................................ 36
LBU Read from ERTEC 200 with Separate Read/Write line.......................................... 39
LBU Write to ERTEC 200 with Separate Read/Write line .............................................. 40
LBU Read from ERTEC 200 with Common Read/Write line.......................................... 41
LBU Write to ERTEC 200 with Common Read/Write line .............................................. 42
Table 2-10: SPI Timing Specifications (slave mode)......................................................................... 43
Table 2-11: SPI Timing Specifications (master mode) ...................................................................... 44
Table 4-1:
Soldering Conditions for Lead-free Device..................................................................... 48
Data Sheet A17989EE2V0DS00
12
µPD800261
1. Pin Functions
1.1 List of Pin Functions
Table 1-1: External Memory Interface Pin Functions
I/O Function
Pin Name
A(23:18)
Alternate Function
I/ONote External memory address bus (23:18)
I/ONote External memory address bus (17:15)
CONFIG(6:1)Note
A(17:15)
BOOT(3:1)Note
A(14:0)
O
I/O
O
O
O
O
O
O
O
O
O
I
External memory address bus (14:0)
External memory data bus (31:0)
Write strobe signal
-
-
-
-
-
-
-
-
-
-
-
-
D(31:0)
WR_N
RD_N
Read strobe signal
CLK_SDRAM
CS_SDRAM_N
RAS_SDRAM_N
CAS_SDRAM_N
WE_SDRAM_N
CS_PER(3:0)_N
BE(3:0)_DQM(3:0)_N
RDY_PER_N
DTR_N
Clock to SDRAM
Chip select to SDRAM
Row address strobe to SDRAM
Column address strobe to SDRAM
RD/WR signal to SDRAM
Chip select to static memories and peripherals
Byte enable signal
Ready signal
I/ONote
O
BOOT0Note
-
Direction signal for external driver or scan clock
Enable signal for external driver or scan clock
OE_DRIVER_N
Note: The BOOT(3:0) and CONFIG(6:1) pins are used as inputs and read into the BOOT_REG respectively
CONFIG_REG system configuration registers during the active Power On reset phase. After a reset,
these pins are available as normal function pins and used as outputs.
Data Sheet A17989EE2V0DS00
13
µPD800261
Table 1-2: Local Bus Interface Pin Functions (1/2)
I/ONote
Alternate FunctionNote
Pin Name
LBU_A(20:16)
LBU_A15
LBU_A14
LBU_A13
LBU_A12
LBU_A11
LBU_A10
LBU_A9
Function
I
LBU address bits
LBU address bit 15
LBU address bit 14
LBU address bits 13
LBU address bit 12
LBU address bit 11
LBU address bit 10
LBU address bit 9
LBU address bit 8
LBU address bit 7
LBU address bit 6
LBU address bit 5
LBU address bit 4
LBU address bit 3
LBU address bit 2
LBU address bit 1
LBU address bit 0
LBU data bit 15
GPIO(36:32)
I
COL_P2
I
RX_DV_P2
I
I
RX_ER_P2/PIPESTA0
CRS_P2/PIPESTA1
RXD_P23/PIPESTA2
RXD_P22/TRACESYNC
RXD_P21/TRACEPKT0
RXD_P20/TRACEPKT1
COL_P1/TRACEPKT2
RX_DV_P1/TRACEPKT3
RX_ER_P1/TRACEPKT4
CRS_P1/TRACEPKT5
RXD_P13/TRACEPKT6
RXD_P12/TRACEPKT7
RXD_P11/ETMEXTIN1
RXD_P10/ETMEXTOUT
GPIO41
I
I
I
LBU_A8
I
LBU_A7
I
LBU_A6
I
LBU_A5
I
LBU_A4
I
LBU_A3
I
LBU_A2
I
LBU_A1
I
LBU_A0
I
LBU_D15
LBU_D14
LBU_D13
LBU_D12
LBU_D11
LBU_D10
LBU_D9
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I
LBU data bit 14
RES_PHY_N
LBU data bit 13
SMI_MDIO
LBU data bit 12
SMI_MDC
LBU data bit 11
TX_ERR_P2
LBU data bit 10
TX_EN_P2
LBU data bit 9
TXD_P23
LBU_D8
LBU data bit 8
TXD_P22
LBU_D7
LBU data bit 7
TXD_P21
LBU_D6
LBU data bit 6
TXD_P20
LBU_D5
LBU data bit 5
TX_ERR_P1
LBU_D4
LBU data bit 4
TX_EN_P1
LBU_D3
LBU data bit 3
TXD_P13
LBU_D2
LBU data bit 2
TXD_P12
LBU_D1
LBU data bit 1
TXD_P11
LBU_D0
LBU data bit 0
TXD_P10
LBU_WR_N
LBU_RD_N
LBU_BE(1:0)_N
LBU_SEG_1
LBU_SEG_0
LBU_IRQ_1_N
LBU_IRQ_0_N
LBU write control signal
LBU read control signal
LBU byte enable
LBU page selection signal
LBU page selection signal
LBU interrupt request signal
LBU interrupt request signal
TX_CLK_P1
I
TX_CLK_P2
I
RX_CLK_P(2:1)
GPIO38
I
I
GPIO37
O
O
GPIO44
GPIO43
Data Sheet A17989EE2V0DS00
14
µPD800261
Table 1-2: Local Bus Interface Pin Functions (2/2)
I/ONote
Alternate FunctionNote
GPIO42
LBU chip select for ERTEC 200 internal resources GPIO40
LBU chip select for page configuration registers GPIO39
Pin Name
LBU_RDY_N
LBU_CS_M_N
LBU_CS_R_N
Function
O
I
LBU ready signal
I
Note: Local bus interface pins are alternatively used as MII diagnosis, trace or GPIO pins; in this table the I/O
type is listed for the local bus function.
Data Sheet A17989EE2V0DS00
15
µPD800261
Table 1-3: MII Diagnosis Interface Pin Functions
Pin NameNote
SMI_MDC
SMI_MDIO
RES_PHY_N
TXD_P2(3:0)
RXD_P23
I/O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Function
Serial management interface clock
Serial management interface data input/output
Reset signal to PHYs
Alternate FunctionNote
LBU_D12
LBU_D13
LBU_D14
Transmit data port 2 bits
Receive data port 2 bit 3
Receive data port 2 bit 2
Receive data port 2 bit 1
Receive data port 2 bit 0
Transmit enable port 2
Carrier sense port 2
LBU_D(9:6)
LBU_A11/PIPESTA2
LBU_A10/TRACESYNC
LBU_A9/TRACEPKT0
LBU_A8/TRACEPKT1
LBU_D10
RXD_P22
RXD_P21
RXD_P20
TX_EN_P2
CRS_P2
LBU_A12/PIPESTA1
LBU_A13/PIPESTA0
LBU_D11
RX_ER_P2
TX_ERR_P2
RX_DV_P2
COL_P2
Receive error port 2
Transmit error port 2
Receive data valid port 2
Collision port 2
LBU_A14
LBU_A15
RX_CLK_P2
TX_CLK_P2
TXD_P1(3:0)
RXD_P13
Receive clock port 2
LBU_BE1_N
Transmit clock port 2
LBU_RD_N
Transmit data port 1 bits
Receive data port 1 bit 3
Receive data port 1 bit 2
Receive data port 1 bit 1
Receive data port 1 bit 0
Transmit enable port 1
Carrier sense port 1
LBU_D(3:0)
LBU_A3/TRACEPKT6
LBU_A2/TRACEPKT7
LBU_A1/ETMEXTIN1
LBU_A0/ETMEXTOUT
LBU_D4
RXD_P12
RXD_P11
RXD_P10
TX_EN_P1
CRS_P1
LBU_A4/TRACEPKT5
LBU_A5/TRACEPKT4
LBU_D5
RX_ER_P1
TX_ERR_P1
RX_DV_P1
COL_P1
Receive error port 1
Transmit error port 1
Receive data valid port 1
Collision port 1
LBU_A6/TRACEPKT3
LBU_A7/TRACEPKT2
LBU_BE0_N
RX_CLK_P1
TX_CLK_P1
Receive clock port 1
Transmit clock port 1
LBU_WR_N
Note: MII diagnosis interface pins are alternatively used as local bus interface or trace pins; in this table the
I/O type is listed for the MII diagnosis function
Data Sheet A17989EE2V0DS00
16
µPD800261
Table 1-4: PHY Interface Pin Functions
Pin Name
P(2:1)TxN
I/O
O
O
O
O
I
Function
Alternate Function
Differential transmit data output
Differential transmit data output
Differential FX transmit data output
Differential FX transmit data output
Differential receive data input
-
P(2:1)TxP
-
-
-
-
-
-
-
-
-
-
P(2:1)TDxN
P(2:1)TDxP
P(2:1)RxN
P(2:1)RxP
P(2:1)RDxN
P(2:1)RDxP
P(2:1)SDxN
P(2:1)SDxP
I
Differential receive data input
I
Differential FX receive data input
Differential FX receive data input
Differential FX signal detect input
Differential FX signal detect input
I
I
I
EXTRES
I/O
External reference resistor (12.4 kΩ) Note
Note: The external resistor must have a maximum tolerance of 1%.
Data Sheet A17989EE2V0DS00
17
µPD800261
Table 1-5: General Purpose I/O Pin Functions
Pin Name
GPIO(44:43)
GPIO42
GPIO41
GPIO40
GPIO39
GPIO(38:37)
GPIO(36:32)
GPIO31
GPIO(30:26)
GPIO25
GPIO24
GPIO23
GPIO22
GPIO21
GPIO20
GPIO19
GPIO18
GPIO17
GPIO16
GPIO15
GPIO14
GPIO13
GPIO12
GPIO11
GPIO10
GPIO9
I/ONote
Function
Alternate FunctionNote
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
General purpose I/O signal
LBU_IRQ(1:0)_N
LBU_RDY_N
LBU_D15
LBU_CS_M_N
LBU_CS_R_N
LBU_SEG(1:0)_N
LBU_A(20:16)
DBGREQ
-
TGEN_OUT1_N
PLL_EXT_IN_N
SPI1_SCLKIN
SPI1_SFRMIN/DBGACK
SPI1_SFRMOUT
SPI1_CLKOUT
SPI1_SSPTXD
SPI1_SSPRXD
SPI1_SSPOE
SPI1_SSPCTLOE
WD_WDOUT0_N
DBGACK
-
UART-CTS_N
UART-DSR_N
UART-DCD_N
UART-RXD
GPIO8
UART-TXD
GPIO7
P2-RX-LED_N/P2-TX-LED_N/P2-ACTIVE-LED_N
P1-RX-LED_N/P1-TX-LED_N/P1-ACTIVE-LED_N
P2-LINK-LED_N
GPIO6
GPIO5
GPIO4
P1-LINK-LED_N
GPIO3
P2-SPEED-100LED_N (TX/FX)/P2-SPEED-10LED_N
P1-SPEED-100LED_N (TX/FX)/P1-SPEED-10LED_N
P2-DUPLEX-LED_N
GPIO2
GPIO1
GPIO0
P1-DUPLEX-LED_N
Note: Primary and alternate functions for GPIO(31:0) are selected with the GPIO_PORT_MODE_H and
GPIO_PORT_MODE_L registers; primary and alternate functions for GPIO(44:32) are selected with the
configuration pins. In this table the I/O types are listed for the GPIO function.
Data Sheet A17989EE2V0DS00
18
µPD800261
Table 1-6: UART Pin Functions
I/ONote
Alternate FunctionNote
GPIO8
Pin Name
UART-TXD
Function
UART transmit data output
UART receive data input
O
I
UART-RXD
GPIO9
UART-DCD_N
UART-DSR_N
UART-CTS_N
I
UART carrier detection signal
UART data set ready signal
UART transmit enable signal
GPIO10
GPIO11
GPIO12
I
I
Note: Primary and alternate functions are selected with the GPIO_PORT_MODE_H and
GPIO_PORT_MODE_L registers. In this table the I/O types are listed for the UART function.
Table 1-7: SPI1 Pin Functions
Pin Name
SPI1_SSPRXD
SPI1_SSPTXD
SPI1_SCLKOUT
SPI1_SFRMOUT
SPI1_SFRMIN
SPI1_SCLKIN
SPI1_SSPCTLOE
SPI1_SSPOE
I/ONote
Function
SPI1 receive data input
Alternate FunctionNote
GPIO18
I
O
O
O
I
SPI1 transmit data output
SPI1 clock output
GPIO19
GPIO20
SPI1 serial frame output signal
SPI1 serial frame input signal
SPI1 clock input
GPIO21
GPIO22, DBGACK
GPIO23
I
O
O
SPI1 clock and serial frame output enable GPIO16
SPI1 output enable GPIO17
Note: Primary and alternate functions are selected with the GPIO_PORT_MODE_H and
GPIO_PORT_MODE_L registers. In this table the I/O types are listed for the SPI1 function.
Table 1-8: MC_PLL Pin Functions
Pin Name
I/ONote 1
Function
MC_PLL input signal
MC_PLL output signalNote 2
Alternate FunctionNote 1
GPIO24
GPIO25
PLL_EXT_IN_N
I
TGEN_OUT1_N
O
Notes: 1. Primary and alternate functions are selected with the GPIO_PORT_MODE_H register. In this table
the I/O types are listed for the MC_PLL function.
2. For a PROFINET IRT application, GPIO25 must be configured as TGEN_OUT1_N output pin. A syn-
chronous clock signal is then output at this pin; during certification of a PROFINET IO device with
IRT support this signal must be accessible from the outside.
Data Sheet A17989EE2V0DS00
19
µPD800261
Table 1-9: Clock and Reset Pin Functions
Pin Name
TRACECLK
CLKP_A
I/O
O
I
Function
ETM trace or scan clock
Quartz connection
Alternate Function
-
-
-
-
-
-
CLKP_B
O
I
Quartz connection
F_CLK
F_CLK for F-counter
Reference clock
REF_CLK
RESET_N
I/O
I
Power On reset
Table 1-10: JTAG and Debug Interface Pin Functions
Pin Name
TRST_N
TCK
I/ONote
Function
JTAG reset signal
Alternate FunctionNote
I
I
-
-
-
-
-
-
JTAG clock signal
TDI
I
JTAG data input signal
TMS
I
JTAG test mode select signal
JTAG data output signal
Hardware reset for debug usage
Debug request signal
TDO
O
I/O
I
SRST_N
DBGREQ
DBGACK
TAP_SEL
GPIO31
O
I
Debug acknowledge signal
TAP controller select signal
GPIO14/GPIO22/SPI1_SFRMIN
-
Note: The DBGREQ (DBGACK) pin is alternatively used as GPIO (GPIO or SPI1) pin; the function is selected
with the GPIO_PORT_MODE_H and GPIO_PORT_MODE_L registers. In this table the I/O type is listed
for the DBGREQ (DBGACK) function.
Data Sheet A17989EE2V0DS00
20
µPD800261
Table 1-11: Trace Port Pin Functions
I/ONote
Pin Name
TRACEPKT7
Function
Trace packet bit 7
Alternate FunctionNote
O
O
O
O
O
O
O
O
O
O
O
O
I
LBU_A2, RXD_P12
LBU_A3, RXD_P13
LBU_A4, CRS_P1
LBU_A5, RX_ER_P1
LBU_A6, RX_DV_P1
LBU_A7, COL_P1
LBU_A8, RXD_P20
LBU_A9, RXD_P21
LBU_A11, RXD_P23
LBU_A12, CRS_P2
LBU_A13, RX_ER_P2
LBU_A10, RXD_P22
LBU_A1, RXD_P11
LBU_A0, RXD_P10
TRACEPKT6
TRACEPKT5
TRACEPKT4
TRACEPKT3
TRACEPKT2
TRACEPKT1
TRACEPKT0
PIPESTA2
Trace packet bit 6
Trace packet bit 5
Trace packet bit 4
Trace packet bit 3
Trace packet bit 2
Trace packet bit 1
Trace packet bit 0
CPU pipeline status, bit 2
CPU pipeline status, bit 1
CPU pipeline status, bit 0
Trace sync signal
PIPESTA1
PIPESTA0
TRACESYNC
ETMEXTIN1
ETMEXTOUT
External input to the ETM
Output signal from the ETM
O
Note: Trace port pins are alternatively used as local bus or MII diagnosis pins; the function is selected with the
GPIO_PORT_MODE_H and GPIO_PORT_MODE_L registers. In this table the I/O types are listed for
the trace port pin functions.
Data Sheet A17989EE2V0DS00
21
µPD800261
Table 1-12: Power Supply Pin Functions
Pin Name
VDD Core
Function
Power supply for core, 1.5 V
GND CORE
GND Core
VDD IO
Power supply for IO, 3.3 V
GND for IO
GND IO
PLL_AVDD
PLL_AGND
VDDQ (PECL)
GND (PECL)
DVDD(4:1)
Analog power supply for PLL, 1.5 V
Analog GND for PLL
Power supply for PECL buffers, 3.3 V
GND for PECL buffers
Digital power supply, 1.5 V
Digital GND
DGND(4:1)
P(2:1)VSSATX(2:1)
P(2:1)VDDARXTX
P(2:1)VSSARX
VDDAPLL
Analog port GND
Analog port RX/TX power supply, 1.5 V
Analog port GND
Analog central power supply, 1.5 V
Analog central power supply, 3.3 V
Analog central GND
VDDACB
VSSAPLLCB
VDD33ESD
VSS33ESD
Analog test power supply, 3.3 V
Analog test GND
Data Sheet A17989EE2V0DS00
22
µPD800261
Table 1-13: Alternative Functions of GPIO(31:0) Pins
FunctionNote
GPIO pin
GPIO0
0
1
2
-
3
-
-
-
-
-
-
after Reset
GPIO0
GPIO0
P1-DUPLEX-LED_N
P2-DUPLEX-LED_N
GPIO1
GPIO1
-
GPIO1
GPIO2
GPIO2
P1-SPEED-100LED_N (TX/FX) P1-SPEED-10LED_N
P2-SPEED-100LED_N (TX/FX) P2-SPEED-10LED_N
GPIO2
GPIO3
GPIO3
GPIO3
GPIO4
GPIO4
P1-LINK-LED_N
P2-LINK-LED_N
P1-RX-LED_N
P2-RX-LED_N
UART-TXD
-
GPIO4
GPIO5
GPIO5
-
GPIO5
GPIO6
GPIO6
P1-TX-LED_N
P1-ACTIVE-LED_N GPIO6
P2-ACTIVE-LED_N GPIO7
GPIO7
GPIO7
P2-TX-LED_N
GPIO8
GPIO8
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
GPIO8
GPIO9
GPIO9
UART-RXD
-
GPIO9
GPIO10
GPIO11
GPIO12
GPIO13
GPIO14
GPIO15
GPIO16
GPIO17
GPIO18
GPIO19
GPIO20
GPIO21
GPIO22
GPIO23
GPIO24
GPIO25
GPIO10
GPIO11
GPIO12
GPIO13
GPIO14
GPIO15
GPIO16
GPIO17
GPIO18
GPIO19
GPIO20
GPIO21
GPIO22
GPIO23
GPIO24
GPIO25
UART-DCD_N
UART-DSR_N
UART-CTS_N
Reserved
-
GPIO10
GPIO11
GPIO12
GPIO13
GPIO14
GPIO15
GPIO16
GPIO17
GPIO18
GPIO19
GPIO20
GPIO21
GPIO22
GPIO23
GPIO24
GPIO25
GPIO(30:26)
GPIO31
-
-
-
DBGACK
-
WD_WDOUT_N
SPI1_SSPCTLOE
SPI1_SSPOE
SPI1_SSPRXD
SPI1_SSPTXD
SPI1_SCLKOUT
SPI1_SFRMOUT
SPI1_SFRMIN
SPI1_SCLKIN
PLL_EXT_IN_N
TGEN_OUT1_N
-
-
-
-
-
-
-
DBGACK
Reserved
-
-
-
-
GPIO(30:26) GPIO(30:26) Reserved
GPIO31 GPIO31 DBGREQ
Note: Alternative functions are software configurable using the GPIO_PORT_MODE_L/H registers.
Data Sheet A17989EE2V0DS00
23
µPD800261
1.2 Pin Characteristics
Table 1-14: Pin Characteristics (1/2)
Drive capability
Internal pull
up/down
Pin Name
I/O
Input type
Output type
IOH
IOL
A23
I/ONote 1
I/ONote 1
I/ONote 1
I/ONote 1
I/ONote 1
SchmittNote 1
SchmittNote 1
SchmittNote 1
SchmittNote 1
SchmittNote 1
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
50 kΩ pull up
50 kΩ pull down
50 kΩ pull up
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
A22
A21
A20
50 kΩ pull down
50 kΩ pull up
A(19:17)
A(16:15)
I/ONote 1
SchmittNote 1
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
-
50 kΩ pull down
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
6 mA
9 mA
-
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
9 mA
6 mA
9 mA
-
A(14:0)
O
I/O
O
O
O
O
O
O
O
O
O
I
-
-
D(31:0)
Schmitt
50 kΩ pull up
WR_N
-
-
RD_N
-
-
CLK_SDRAM
CS_SDRAM_N
RAS_SDRAM_N
CAS_SDRAM_N
WE_SDRAM_N
CS_PER(3:0)_N
BE(3:0)_DQM(3:0)_N
RDY_PER_N
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Schmitt
50 kΩ pull up
DTR_N
I/ONote 1
O
SchmittNote 1
-
3.3 V CMOS
3.3 V CMOS
50 kΩ pull up
9 mA
9 mA
9 mA
9 mA
OE_DRIVER_N
-
LBU_A(20:0)Note 2
LBU_D(15:0) Note 2
LBU_WR_N Note 2
LBU_RD_N Note 2
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
6 mA
9 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
24 mA
6 mA
6 mA
9 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
6 mA
24 mA
6 mA
LBU_BE(1:0)_NNote 2
LBU_SEG_(1:0) Note 2
LBU_IRQ_(1:0)_N Note 2
LBU_RDY_N Note 2
LBU_CS_M_N Note 2
LBU_CS_R_N Note 2
GPIO(31:30) Note 2
GPIO(29:27) Note 2
GPIO(26:8) Note 2
GPIO(7:0) Note 2
CLKP_A
I/O
I
Schmitt
3.3 V CMOS
-
50 kΩ pull up
9 mA
-
9 mA
-
Osc. in
-
-
-
CLKP_B
O
O
-
-
Osc. out
3.3 V CMOS
6 mA
18 mA
6 mA
18 mA
TRACECLK
Data Sheet A17989EE2V0DS00
24
µPD800261
Table 1-14: Pin Characteristics (2/2)
Drive capability
Internal pull
up/down
Pin Name
I/O
Input type
Output type
IOH
IOL
F_CLK
I
3.3 V CMOS
-
-
3.3 V CMOS
-
-
-
-
REF_CLK
RESET_N
P(2:1)TxN
P(2:1)TxP
O
-
6 mA
6 mA
I
Schmitt
Analog
Analog
50 kΩ pull up
-
-
-
-
-
-
I/O
I/O
Analog
Analog
-
-
P(2:1)TDxN Note 3
O
-
3.3 V CMOS
-
12 mA
12 mA
P(2:1)TDxP Note 3
P(2:1)RxN
P(2:1)RxP
P(2:1)RDxN
P(2:1)RDxP
P(2:1)SDxN
P(2:1)SDxP
EXTRES
TRST_N
TCK
O
-
3.3 V CMOS
-
12 mA
12 mA
I/O
Analog
Analog
PECL
PECL
PECL
PECL
Analog
Schmitt
Schmitt
Schmitt
Schmitt
-
Analog
-
-
-
I/O
Analog
-
-
-
I
-
-
-
-
I
-
-
-
-
I
-
-
-
-
I
-
-
-
-
I/O
Analog
-
-
-
I
-
-
-
-
I
I
-
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
-
-
-
TDI
-
-
-
TMS
I
-
-
-
TDO
O
I/O
I
3.3 V CMOS
3.3 V CMOS
-
6 mA
6 mA
-
6 mA
6 mA
-
SRST_N
TAP_SEL
Schmitt
Schmitt
50 kΩ pull up
50 kΩ pull up
Notes: 1. The address pins A(23:15) and the DTR_N pin are used as inputs only during the active reset phase.
2. These pins have alternative functions, to which the pin characteristics apply as well. Note that the I/O
type given in Table 1-14 applies to the pin. I/O types that apply to one of the shared functions of a
specific pin are found in Tables 1-1 to 1-12.
3. These pins require external circuitry in order to provide PECL compliant output levels.
Remark: Shared pins are not listed with all possible pin names. Please check Tables 1-1 to 1-11 for possible
pin names first, before looking up pin characteristics in Table 1-14.
Data Sheet A17989EE2V0DS00
25
µPD800261
1.3 Pin Status and Recommended Connections
Table 1-15: Pin Status During Reset and Recommended Connections (1/2)
Internal pull
up/down
I/O during
reset
Level
External pull
Pin Name
I/O
during reset up/down required
I/ONote 1
I/ONote 1
I/ONote 1
I/ONote 1
I/ONote 1
50 kΩ pull up
50 kΩ pull down
50 kΩ pull up
INote 1
INote 1
INote 1
INote 1
INote 1
HNote 1
Note 1
A23
A22
A21
A20
LNote 1
Note 1
HNote 1
Note 1
LNote 1
Note 1
50 kΩ pull down
50 kΩ pull up
HNote 1
Note 1
A(19:17)
I/ONote 1
50 kΩ pull down
INote 1
LNote 1
Note 1
A(16:15)
A(14:0)
O
I/O
O
O
O
O
O
O
O
O
O
I
-
O
I
-
-
-
-
-
-
-
-
-
-
-
-
-
D(31:0)
50 kΩ pull up
H
H
H
L
WR_N
-
O
O
O
O
O
O
O
O
O
I
RD_N
-
CLK_SDRAM
CS_SDRAM_N
RAS_SDRAM_N
CAS_SDRAM_N
WE_SDRAM_N
CS_PER(3:0)_N
BE(3:0)_DQM(3:0)_N
RDY_PER_N
-
-
H
H
H
H
H
H
H
-
-
-
-
-
50 kΩ pull up
DTR_N
I/ONote 1
O
50 kΩ pull up
INote 1
HNote 1
H
Note 1
-
OE_DRIVER_N
-
ETMEXTOUTNote 2
ETMEXTIN1Note 2
TRACEPKT(7:0)Note 2
PIPESTA(2:0)Note 2
GPIO(44:32)Note 2
GPIO(31:30)Note 2
GPIO(29:27)Note 2
GPIO(28:8)Note 2
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
INote 7
H
H
H
H
H
H
H
H
-
-
-
-
-
-
-
-
I
INote 7
INote 7
I
I
I
I
GPIO(7:0)Note 2
CLKP_A
I/O
I
50 kΩ pull up
I
I
H
-
-
-
-
-
-
-
-
CLKP_B
O
O
I
O
O
I
-
TRACECLK
F_CLK
L
-
-
REF_CLK
RESET_N
TRST_N
I/O
-
tri-stateNote 3
-
LNote 4
HNote 5
H
-
I
I
I
I
I
50 kΩ pull up
-
I
I
I
I
I
-
Pull up
TCKNote 6
TDINote 6
TMSNote 6
50 kΩ pull up
50 kΩ pull up
50 kΩ pull up
-
-
-
H
H
Data Sheet A17989EE2V0DS00
26
µPD800261
Table 1-15: Pin Status During Reset and Recommended Connections (2/2)
Internal pull
up/down
I/O during
reset
Level
External pull
Pin Name
TDONote 6
I/O
during reset up/down required
O
I/O
I
-
O
O
I
L
L
-
-
-
SRST_N
TAP_SEL
50 kΩpull up
50 kΩpull up
H
Notes: 1. These pins are used as inputs only during the active reset phase. The levels during reset shown in
Table 1-15 refer to the default configuration without external pull-up/down resistors connected to
BOOT(3:0) and CONFIG(6:1)
2. These pins have alternative functions, to which the pin characteristics apply as well. Note that the I/O
type given in Table 1-15 applies to the pin. I/O types that apply to one of the shared functions of a
specific pin are found in Tables 1-1 to 1-12.
3. The reset behaviour of this pin is determined by the CONFIG1 signal.
4. RESET_N must be externally driven low in order to reset the device.
5. High level is generated from external pull up resistor and not by internal device circuitry.
6. The reset signal, that affects these signals, is TRST_N.
7. All trace interface pins are configured as inputs in the default configuration that is determined by the
internal pull-up/down resistors at the CONFIG(6:5) and CONFIG1 pins.
Remarks: 1. Shared pins are not listed with all possible pin names. Please check Tables 1-1 to 1-11 for possi-
ble pin names first, before looking up reset characteristics and recommended connections in
Table 1-15.
2. I/O and level during reset are given for the default configuration that is determined by the internal
pull-up/down resistors at the CONFIG(6:5) and CONFIG1 pins.
Data Sheet A17989EE2V0DS00
27
µPD800261
Table 1-16: Alternative Functions of LBU Interface Pins (1/2)
LBU active
CONFIG(6:5) = xxb
CONFIG2= 0b
Function 1 during reset
LBU_A20
MII diagnosis mode
Trace interface active
CONFIG(6:5) = 01b
CONFIG2= 1b
CONFIG(6:5) = 10b
CONFIG2= 1b
Function 2
GPIO36
during reset
Function 3
GPIO36
during reset
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
-
-
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
LBU_A19
LBU_A18
LBU_A17
LBU_A16
LBU_A15
LBU_A14
LBU_A13
LBU_A12
LBU_A11
LBU_A10
LBU_A9
LBU_A8
LBU_A7
LBU_A6
LBU_A5
LBU_A4
LBU_A3
LBU_A2
LBU_A1
LBU_A0
LBU_D15
LBU_D14
LBU_D13
LBU_D12
LBU_D11
LBU_D10
LBU_D9
LBU_D8
LBU_D7
LBU_D6
LBU_D5
LBU_D4
LBU_D3
LBU_D2
LBU_D1
LBU_D0
GPIO35
I
GPIO35
GPIO34
I
GPIO34
GPIO33
I
GPIO33
GPIO32
I
GPIO32
COL_P2
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I
-
RX_DV_P2
RX_ER_P2
CRS_P2
-
PIPESTA0
PIPESTA1
RXD_P23
RXD_P22
RXD_P21
RXD_P20
COL_P1
PIPESTA2
TRACESYNC
TRACEPKT0
TRACEPKT1
TRACEPKT2
RX_DV_P1
RX_ER_P1
CRS_P1
TRACEPKT3
TRACEPKT4
TRACEPKT5
RXD_P13
RXD_P12
RXD_P11
RXD_P10
GPIO41
TRACEPKT6
TRACEPKT7
ETMEXTIN1
ETMEXTOUT
GPIO41
RES_PHY_N
SMI_MDIO
SMI_MDC
TX_ERR_P2
TX_EN_P2
TXD_P23
TXD_P22
TXD_P21
TXD_P20
TX_ERR_P1
TX_EN_P1
TXD_P13
TXD_P12
TXD_P11
TXD_P10
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Data Sheet A17989EE2V0DS00
28
µPD800261
Table 1-16: Alternative Functions of LBU Interface Pins (2/2)
LBU active
MII diagnosis mode
Trace interface active
CONFIG(6:5) = 10b
CONFIG2= 1b
Function 3 during reset
CONFIG(6:5) = xxb
CONFIG2= 0b
CONFIG(6:5) = 01b
CONFIG2= 1b
Function 1
LBU_WR_N
during reset
Function 2
TX_CLK_P1
during reset
I
I
O
O
O
O
I
-
-
-
-
-
-
-
-
I
I
I
I
I
I
I
LBU_RD_N
TX_CLK_P2
RX_CLK_P2
RX_CLK_P1
GPIO38
LBU_BE1_N
LBU_BE0_N
LBU_SEG_1
LBU_SEG_0
LBU_IRQ_1_N
LBU_IRQ_0_N
LBU_RDY_N
LBU_CS_M_N
LBU_CS_R_N
I
I
I
GPIO38
GPIO37
GPIO44
GPIO43
GPIO42
GPIO40
GPIO39
I
GPIO37
I
O
O
O
I
GPIO44
I
GPIO43
I
GPIO42
I
GPIO40
I
I
GPIO39
I
Data Sheet A17989EE2V0DS00
29
µPD800261
2. Electrical Specifications
2.1 Absolute Maximum Ratings
Table 2-1: Absolute Maximum Ratings
Symbol
VDD Core
Parameter
Power supply for core
Ratings
Unit
V
-0.5 to +2.0
-0.5 to +4.6
-0.5 to +2.0
-0.5 to +2.0
-0.5 to +4.6
-0.5 to +2.0
-0.5 to +2.0
-0.5 to +4.6
-0.5 to +4.6
Power supply for IO
VDD IO
V
Analog power supply for PLL
Digital power supply for PHYs
Analog central 3.3 V supply for PHYs
Analog central 1.5 V supply for PHYs
Analog Rx/Tx port power supply
PECL buffer power supply
Analog test supply
PLL_AVDD
DVVD
V
V
VDDACB
V
VDDAPLL
P(2:1)VDDARXTX
VDDQ (PECL)
VDD33ESD
V
V
V
V
3.3 V CMOS,
VI < VDD + 0.5 V
VI
Input voltage
-0.5 to+ 4.6
V
TJ
Junction temperature
Storage temperature
-40 to +120
-65 to +150
°C
°C
TSTG
Caution: Product quality may suffer if the absolute maximum rating is exceeded even momen-
tarily for any parameter. That is, the absolute maximum ratings are rated values at
which the product is on the verge of suffering physical damage, and therefore the
product must be used under conditions that ensure that the absolute maximum rat-
ings are not exceeded. The ratings and conditions indicated for DC characteristics
and AC characteristics represent the quality assurance range during normal opera-
tion.
Remark: 3.3 V must be applied to the I/O pins only after applying the power supply voltage.
Data Sheet A17989EE2V0DS00
30
µPD800261
2.2 Operating Conditions
Table 2-2: Recommended Operating Conditions (1/2)
Test
Conditions
Parameter
Power supply for core
Symbol
MIN.
TYP.
MAX.
Unit
VDD Core
VDD IO
1.35
3.0
1.5
3.3
1.5
1.5
3.3
1.5
1.5
3.3
3.3
1.65
3.6
V
V
Power supply for IO
Analog power supply for PLL
Digital power supply for PHYs
Analog central 3.3 V supply for PHYs
Analog central 1.5 V supply for PHYs
Analog Rx/Tx port power supply
PECL buffer power supply
Analog test supply
PLL_AVDD
DVVD
1.35
1.35
3.0
1.65
1.65
3.6
V
V
VDDACB
V
VDDAPLL
P(2:1)VDDARXTX
VDDQ (PECL)
VDD33ESD
TA
1.35
1.35
3.0
1.65
1.65
3.6
V
V
V
3.0
3.6
V
Ambient temperature
-40
+85
°C
VDD IO-
0.1 V
IOH = 0 mA
V
VOH
Output voltage high
3.3 V CMOS
3.3 V CMOS
nominal
output
current
2.4
V
V
V
V
V
V
V
IOL = 0 mA
0.1
0.4
nominal
output
current
VOL
VIH
VIL
Output voltage low
Input voltage high
3.3 V CMOS
3.3 V PECL
3.3 CMOS
2
VDD IO
-1.165
0.8
difference
to VDDQ
level
-0.880
0
difference
to VDDQ
level
Input voltage low
3.3 V PECL
-1.475
-1.880
VP
VN
Positive trigger voltage
1.2
0.6
2.4
1.8
V
V
Negative trigger volt-
age
Schmitt
input
VH
tRI
tFI
tRI
tFI
Hysteresis voltage
Input rise time
Input fall time
0.3
0
1.5
200
200
10
V
ns
ns
ms
ms
3.3 V CMOS
0
Input rise time
Input fall time
0
Schmitt
input
0
10
Data Sheet A17989EE2V0DS00
31
µPD800261
Table 2-2: Recommended Operating Conditions (2/2)
Test
Conditions
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
CPU clock frequencyNote 1
PFC
150
25
MHz
MHz
25
- 50 ppm
25
+ 50 ppm
Oscillator clock frequencyNote 2
PLL_FC
25
- 50 ppm
25
+ 50 ppm
Reference clock frequencyNote 3
Reference clock stability
REF_Clk_FC
25
MHz
REF_Clk_TCS
IDD Core
IDD IO
-0.2
0.2
450
235
535
175
435
85
ns
1.5 V supply
mA
mA
mA
mA
mA
mA
mW
mW
mW
mW
mW
mW
mW
mW
mW
10Base-TX
mode
Supply currentNote 4, 5
Supply currentNote 4, 5
Supply currentNote 4, 5
3.3 V supply
1.5 V supply
3.3 V supply
1.5 V supply
3.3 V supply
1.5 V supply
3.3 V supply
total
IDD Core
IDD IO
400
100
100 Base-
TX mode
IDD Core
IDD IO
100 Base-
FX mode
PDD Core
PDD IO
PDD
670
770
1440
800
570
1370
650
280
930
Power
consumptionNote 4, 5
10Base-TX
mode
1.5 V supply
3.3 V supply
total
PDD Core
PDD IO
PDD
600
330
990
Power
consumptionNote 4, 5
100 Base-
TX mode
1.5 V supply
3.3 V supply
total
PDD Core
PDD IO
PDD
Power
consumptionNote 4, 5
100 Base-
FX mode
Notes: 1. The CPU clock is an internal signal. Different CPU core operation frequencies can be selected via
hardware settings during reset; possible settings are 50/100/150 MHz.
2. The oscillator clock is present at the CLKP_A and CLKP_B pins.
3. The reference clock is available at the REF_CLK pin, if the CONFIG1 pin was pulled low during the
active reset phase.
4. Typical values for supply currents and power consumption have been measured under the following
conditions:
•
Nominal operating voltages and temperature (VDD IO = 3.3 V, VDD Core = 1.5 V, TA = 25°C
•
•
•
Operation of ERTEC 200 on the EB200 evaluation board with 150 MHz core clock frequency
SDRAM test program and Ethernet traffic running; internal PHYs set to 100 Base-TX mode
No activity on LBU interface
5. Maximum values for supply currents and power consumption have been calculated for
VDD IO = 3.6 V and VDD Core = 1.65 V at TA = 85°C.
Data Sheet A17989EE2V0DS00
32
µPD800261
2.3 Thermal Characteristics
Table 2-3: Thermal Characteristics of Package
Airflow (m/s)
Parameter
Symbol
Unit
2
0
0.2
1
Thermal resistance junction to ambientNote 1
30
27
23
21
K/W
K/W
Θ
ja
Thermal resistance junction to top center of
the package surfaceNote 1
Ψ
0.2
0.3
0.6
0.8
jt
Thermal resistance top center of the package
surface to ambientNote 1
Ψ
29.8
5.2
26.7
5.2
22.4
5.2
20.2
5.2
K/W
ta
Thermal resistance junction to caseNote 2
Maximum case temperature
K/W
°C
Θ
jc
Tcmax
105
Notes: 1. The parameters are valid, if no heat sink is used and a PCB with at least 4 layers and massive
ground and power planes.
2. The parameter is valid, if a heat sink is used.
Data Sheet A17989EE2V0DS00
33
µPD800261
2.4 AC Characteristics
2.4.1 Clock timing
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-4: Clock AC Characteristics
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
50/100/
150
Processor clock frequencyNote 1
PFC
PTC
MHz
20/10/
6.66
Processor clock periodNote 1
Oscillator clock frequency
Reference clock frequency
ns
25
- 50 ppm
25
+ 50 ppm
PLL_FC
25
25
MHz
MHz
25
- 50 ppm
25
+ 50 ppm
REF_PLL_FC
JTAGClk frequency
JTAG_FC
10
MHz
ns
JTAGClk period
JTAG_TC
100
0
SPI1_SCLKIN frequency (slave mode)
SPI1_SCLKIN low time (slave mode)
SPI1_SCLKIN high time (slave mode)
SPI1_S_FC
SPI1_S_TCL
SPI1_S_TCH
4.16
MHz
ns
120
120
ns
SPI1_SCLKOUT frequency
(master mode)
769 x 10-6
SPI1_M_FC
SPI1_M_TC
SPI1_M_TCL
25
1.3 x 106
55
MHz
ns
SPI1_SCLKOUT period (master mode)
40
45
SPI1_SCLKOUT low time
(master mode)Note 2
%
SPI1_SCLKOUT high time
(master mode)Note 2
SPI1_M_TCH
45
20
55
50
%
CLK_SDRAM frequency
CLK_SDRAM period
SDRAM_FC
SDRAM_TC
SDRAM_TCS
MHz
ns
CLK_SDRAM clock stability
+/- 0.2
60
ns
CLK_SDRAM input high timeNote 2
CLK_SDRAM input low timeNote 2
SDRAM_TCH
SDRAM_TCL
40
40
%
%
60
Notes: 1. The actually permitted maximum clock frequency respectively minimum clock period is given by the
CONFIG(4:3) pin setting during reset and depends additionally on the accuracy of the oscillator
clock.
2. High time and low time are specified in per cent of the nominal clock period.
Data Sheet A17989EE2V0DS00
34
µPD800261
Figure 2-1: Clock Waveforms
2.0 V
1.5 V
0.8 V
TCH
TCL
TC
Data Sheet A17989EE2V0DS00
35
µPD800261
2.4.2 I/O timing specifications
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-5: I/O Timing Specifications
Input
Output
Signal
Unit
Clock
Notes
Setup time Hold time Valid delay Hold time
TIS min.
TIH min.
TOV max.
TOH min.
D(31:0)
A(23:0)
10
0
12.5
11
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
CLK_SDRAM
CLK_SDRAM
CLK_SDRAM
CLK_SDRAM
CLK_SDRAM
CLK_SDRAM
CLK_SDRAM
CLK_SDRAM
CLK_SDRAM
50 MHz
4
4
BE(3:0)_DQM_N(3:0)
CAS_SDRAM_N
RAS_SDRAM_N
WE_SDRAM_N
CS_SDRAM_N
WR_N
11
4
11
5
11
5
11
5
11
5
11
4
RD_N
11
4
LBU_D(15:0)
LBU_A(20:16)
LBU_A(15:0)
LBU_RDY_N
LBU_IRQ(1:0)_N
LBU_SEG(1:0)_N
LBU_CS_M_N
LBU_CS_R_N
LBU_WR_N
LBU_RD_N
LBU_BE(1:0)_N
TDI
10.4
10.4
10.4
10.4
10.4
10.4
10.4
10.4
10.4
10.4
10.4
8
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
4
50 MHz
2
50 MHz
3
50 MHz
5
50 MHz
5
50 MHz
2
50 MHz
2
50 MHz
2
50 MHz
3
50 MHz
3
50 MHz
3
TCK
-
TMS
8
0
TCK
-
TDI
8
0
TCK
-
TMS
8
0
TCK
-
TDO
10
2
2
2
2
TCK
5
TRACESYNC
PIPESTA(2:0)
TRACEPKT
Tc - 3
Tc - 3
Tc - 3
TRACECLK
TRACECLK
TRACECLK
1, 3
1, 3
1, 3
Notes: 1. If the trace interface is operated in half rate mode, Tc corresponds to the distance between a rising
and the subsequent falling edge of TRACECLK; if the trace interface is operated in full rate mode, Tc
corresponds to a full period of the trace clock TRACECLK.
2. Minimum hold time is measured with 10 pF load and maximum valid delay is measured with 25 pF
load.
3. Minimum hold time is measured with 10 pF load and maximum valid delay is measured with 10 pF
load.
4. Minimum hold time is measured with 10 pF load and maximum valid delay is measured with 50 pF
load.
5. Minimum hold time is measured with 10 pF load and maximum valid delay is measured with 30 pF
load
Data Sheet A17989EE2V0DS00
36
µPD800261
Figure 2-2: Input Setup and Hold Waveforms
Clock
Inputs
TIH min.
TIS min.
Valid
Figure 2-3: Output Delay Waveforms
Clock
TOV max.
TOV max.
TOH min.
TOH min.
Outputs
High (Drive)
Float (High-Z)
Low (Drive)
Valid
Valid
Data Sheet A17989EE2V0DS00
37
µPD800261
2.4.3 LBU timing specifications
Remarks: 1. The polarity of the LBU_RDY_N signal can be configured using the CONFIG6 pin.
LBU_POL_RDY signal. LBU_RDY_N must be pulled to its "ready" level by an external
pull-down or the internal pull-up resistor.
CONFIG6 = 0b
CONFIG6 = 1b
LBU_RDY_N active low use external pull-down resistor
LBU_RDY_N active high use internal pull-up resistor (default
setting)
2. The CONFIG5 signal is used to select access control through separate read/write lines
or a common read/write line.
CONFIG5 = 0b
CONFIG5 = 1b
use separate read/write lines LBU_RD_N and LBU_WR_N (default
setting)
use common read/write line LBU_WR_N
In case of a common read/write line, LBU_WR_N must be high for a read access and
low for a write access. The unused LBU_RD_N input can then be left open because it is
pulled to inactive (high) level by an internal pull-up resistor.
3. ERTEC 200 responds to a read or write access by first driving LBU_RDY_N to "not
ready" level. Then LBU_RDY_N is driven to "ready" level for tRAP.. The length of the "not
ready" phase of LBU_RDY_N varies strongly on the internal states of ERTEC 200 and
the currently ongoing internal communication processes. Therefore no upper limit for
the length of the "not ready" period is specified.
4. ERTEC 200 has two LBU chip select inputs; one for access to the page configuration
registers (LBU_CS_R_N) and one to access to the ERTEC 200 memory addess space
(LBU_CS_M_N). Only one of these chip select signals may be active at a time and it is
not allowed to change the chip select during the complete access.
Data Sheet A17989EE2V0DS00
38
µPD800261
(1) LBU Read from ERTEC 200 with Separate Read/Write line (LBU_RDY_N active low)
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-6: LBU Read from ERTEC 200 with Separate Read/Write line
Parameter
Symbol
Condition
MIN.
MAX.
Unit
Chip select asserted to read pulse
asserted delay
tCSRS
-
0
-
ns
Address valid to read pulse asserted
setup time
tARS
tRRE
tRDE
-
-
-
0
5
5
-
ns
ns
ns
Read pulse asserted to ready enabled
delay
12
12
Read pulse asserted to data enable
delay
tRAP
tRTD
Ready active pulse width
-
-
17
-
23
5
ns
ns
Ready asserted to data valid delay
Read pulse deasserted to chip select
deasserted delay
tRCSH
tRAH
tRDH
tRR
-
-
0
0
-
-
ns
ns
Address valid to read pulse deasserted
hold time
Data valid/enabled to read pulse deas-
serted hold time
-
-
0
12
-
ns
ns
Read recovery time
25
Figure 2-4: LBU Read from ERTEC 200 with Separate Read/Write line
LBU_CS_R_N/
LBU_CS_M_N
tRCSH
tCSRS
LBU_RD_N
tRR
tARS
LBU_A(20:0)/
LBU_SEG(1:0)/
LBU_BE(1:0)_N
tRAH
tRRE
tRAP
LBU_RDY_N
LBU_D(15:0)
tRDH
tRDE
tRTD
Data Sheet A17989EE2V0DS00
39
µPD800261
(2) LBU Write to ERTEC 200 with separate Read/Write line (LBU_RDY_N active low)
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-7: LBU Write to ERTEC 200 with Separate Read/Write line
Parameter
Symbol
Condition
MIN.
MAX.
Unit
Chip select asserted to write pulse
asserted delay
tCSWS
-
0
-
ns
Address valid to write pulse asserted
setup time
tAWS
tWRE
-
-
0
5
-
ns
ns
Write pulse asserted to ready enabled
delay
12
tWDV
tRAP
Write pulse asserted to data valid delay
Ready active pulse width
-
-
-
40
23
ns
ns
17
Write pulse deasserted to chip select
deasserted delay
tWCSH
tWAH
tRTW
-
-
-
0
0
0
-
-
-
ns
ns
ns
Address hold time after write strobe
deasserted
Ready asserted to write pulse deas-
serted delay
Data hold time after write pulse deas-
serted
tWDH
tWR
-
-
0
-
-
ns
ns
Write recovery time
25
Figure 2-5: LBU Write to ERTEC 200 with Separate Read/Write line
LBU_CS_R_N/
LBU_CD_M_N
tCSWS
tWCSH
LBU_WR_N
tWR
tAWS
LBU_A(20:0)/
LBU_SEG(1:0)
LBU_BE(1:0)_N
tRTW
tWAH
tWRE
LBU_RDY_N
LBU_D(15:0)
tRAP
tWDH
tWDV
Data Sheet A17989EE2V0DS00
40
µPD800261
(3) LBU Read from ERTEC 200 with Common Read/Write line (LBU_RDY_N active low)
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-8: LBU Read from ERTEC 200 with Common Read/Write line
Parameter
Symbol
Condition
MIN.
MAX.
Unit
Write signal deasserted to chip select
asserted setup time
tWCS
-
2
-
ns
Address valid to chip select asserted
setup time
tACS
tCRE
tCDE
-
-
-
0
5
5
-
ns
ns
ns
Chip select asserted to ready enabled
delay
12
12
Chip select asserted to data enable
delay
tRAP
tRTD
Ready active pulse width
-
-
17
-
23
5
ns
ns
Ready asserted to data valid delay
Write signal inactive to chip select deas-
serted hold time
tCWH
tCAH
tCDH
tRR
-
-
0
0
-
-
ns
ns
Address valid to chip select deasserted
hold time
Data valid/enabled to chip select deas-
serted hold time
-
-
0
12
-
ns
ns
Read recovery time
25
Figure 2-6: LBU Read from ERTEC 200 with Common Read/Write line
LBU_CS_R_N/
LBU_CS_M_N
tRR
tWCS
LBU_WR_N
tCWH
tACS
LBU_A(20:0)/
LBU_SEG(1:0)/
LBU_BE(1:0)_N
tCRE
tCAH
tRAP
LBU_RDY_N
LBU_D(15:0)
tCDH
tCDE
tRTD
Data Sheet A17989EE2V0DS00
41
µPD800261
(4) LBU Write to ERTEC 200 with Common Read/Write line (LBU_RDY_N active low)
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-9: LBU Write to ERTEC 200 with Common Read/Write line
Parameter
Symbol
Condition
MIN.
MAX.
Unit
Write signal asserted to chip select
setup time
tWCS
-
2
-
ns
Address valid to chip select asserted
setup time
tACS
tCRE
-
-
0
5
-
ns
ns
Chip select asserted to ready enabled
delay
12
tCDV
tRAP
Chip select asserted to data valid delay
Ready active pulse width
-
-
-
40
23
ns
ns
17
Write signal deasserted to chip select
deasserted hold time
tCWH
tCAH
tRTC
-
-
-
0
0
0
-
-
-
ns
ns
ns
Address hold time after chip select deas-
serted
Ready asserted to chip select deas-
serted delay
Data valid/enabled to chip select deas-
serted hold time
tCDH
tWR
-
-
0
-
-
ns
ns
Write recovery time
25
Figure 2-7: LBU Write to ERTEC 200 with Common Read/Write line
LBU_CS_R_N/
LBU_CS_M_N
tWR
tWCS
LBU_WR_N
tCWH
tACS
LBU_A(20:0)/
LBU_SEG(1:0)/
LBU_BE(1:0)_N
tRTC
tCRE
tCAH
LBU_RDY_N
LBU_D(15:0)
tCDH
tCDV
tRAP
Data Sheet A17989EE2V0DS00
42
µPD800261
2.4.4 SPI timing specifications
Remarks: 1. Please note, that different serial clock frequency ranges for SPI slave and master
modes are given in Table 2-4.
2. Timing diagrams are shown for TI-format only. Other transfer formats can be configured,
however the AC-timing parameters (setup/hold times, delays) remain in principle
unchanged.
3. Not every external SPI device, that is connected to ERTEC 200, requires usage of all
available SPI signals.
(1) SPI interface configured to slave mode
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-10: SPI Timing Specifications (slave mode)
Parameter
SPI1_SSPRXD setup time
SPI1_SSPRXD hold time
SPI1_SFRMIN setup time
SPI1_SFRMIN hold time
SPI1_SSPTXD delay
Symbol
Condition
MIN.
20
60
40
20
-
MAX.
Unit
ns
tSSPRXDS
-
-
-
-
-
-
-
-
tSSPRXDH
tSFRMINS
tSFRMINH
tSSPTXDD
tSSPOED
ns
-
ns
-
ns
40
40
ns
SPI1_SSPOE delay
-
ns
Figure 2-8: SPI Timing in Slave Mode (TI-format Example)
Data Sheet A17989EE2V0DS00
43
µPD800261
(2) SPI interface configured to master mode
TA = -40 to +85°C, VDDCore = 1.35 V ~ 1.65 V, VDDIO = 3.0 V ~ 3.6 V
Table 2-11: SPI Timing Specifications (master mode)
Parameter
SPI1_SSPRXD setup time
SPI1_SSPRXD hold time
SPI1_SFRMOUT delay time
SPI1_SSPTXD delay
Symbol
Condition
MIN.
14
MAX.
-
Unit
ns
tSSPRXDS
-
-
-
-
-
-
tSSPRXDH
tSFRMOUTD
tSSPTXDD
tSSPOED
0
-
ns
-0.3
-0.6
-0.6
-0.7
0.3
0.1
0.1
0
ns
ns
SPI1_SSPOE delay
ns
tSSPCTLOED
SPI1_SSPCTLOE delay
ns
Figure 2-9: SPI Timing in Master Mode (TI-format Example)
Data Sheet A17989EE2V0DS00
44
µPD800261
2.4.5 Power-up sequence
Figure 2-10: Power-Up Sequence Timing Diagram
VDD
RESET_N
min. 35 µs
CLKP_A
Unstable
min. 2 µs
Data Sheet A17989EE2V0DS00
45
µPD800261
2.4.6 Reset timing
Figure 2-11: Reset Timing Diagram
CLKP_A
(25 MHz)
~16384 TCLKP_A
~16 TCLK_50
CLK_50
(internal clock)
CLK_100
(internal clock for IRT)
CLK_ARM
(internal clock for CPU)
RESET_N
XRES_ERTEC/
XRES_CNTRL
(internal signal)
Data Sheet A17989EE2V0DS00
46
µPD800261
3. Package Drawing
Figure 3-1: Package Drawing
304-PIN PLASTIC FBGA (19x19)
ZE
A
D
w
S
A
ZD
22
21
20
19
18
17
16
15
14
13
12
11
10
9
B
E
8
7
5
3
6
4
2
1
AA W U R N L J G E C A
AB Y V T P M K H F D B
w
S B
INDEX MARK
A
A2
A1
y1
S
(UNIT:mm)
ITEM DIMENSIONS
S
D
E
19.00 0.10
19.00 0.10
0.20
y
w
e
S
e
0.80
A
1.48 0.10
0.35 0.06
1.13
M
b
x
S A B
A1
A2
0.05
0.50
b
0.10
x
0.08
0.10
0.20
1.10
y
y1
ZD
ZE
1.10
P304F1-80-HN2
Data Sheet A17989EE2V0DS00
47
µPD800261
4. Recommended Soldering Conditions
Solder this product under the following recommended conditions.
For details of the recommended soldering conditions, refer to the information document
Semiconductor Device Mounting Technology Manual (C10535E).
For soldering methods and conditions other than those recommended please consult NEC.
•
for µPD800261F1-816-HN2-A (lead free device)
Table 4-1: Soldering Conditions for Lead-free Device
Symbol of Recommended Soldering
Soldering Method
Soldering Condition
Condition
Package peak temperature: 260°C,
Time: 60 seconds max. (220°C min.),
Number of times: 3 max.,
Infrared reflow
IR60-107-3
Number of days: 7 Note
Note: The number of days refers to storage at 25°C, 65% RH MAX after the dry pack has been
opened.
After that, prebaking is necessary at 125 °C for 10 to 72 hours.
Data Sheet A17989EE2V0DS00
48
µPD800261
./4%3 &/2 #-/3 $%6)#%3
6/,4!'% !00,)#!4)/. 7!6%&/2- !4 ).054 0).
7AVEFORM DISTORTION DUE TO INPUT NOISE OR A REFLECTED WAVE MAY CAUSE MALFUNCTIONꢎ )F THE INPUT OF THE
#-/3 DEVICE STAYS IN THE AREA BETWEEN 6), ꢄ-!8ꢆ AND 6)( ꢄ-).ꢆ DUE TO NOISEꢍ ETCꢎꢍ THE DEVICE MAY
MALFUNCTIONꢎ 4AKE CARE TO PREVENT CHATTERING NOISE FROM ENTERING THE DEVICE WHEN THE INPUT LEVEL IS
FIXEDꢍ AND ALSO IN THE TRANSITION PERIOD WHEN THE INPUT LEVEL PASSES THROUGH THE AREA BETWEEN 6), ꢄ-!8ꢆ
AND 6)( ꢄ-).ꢆꢎ
ꢀ
ꢁ
(!.$,).' /& 5.53%$ ).054 0).3
5NCONNECTED #-/3 DEVICE INPUTS CAN BE CAUSE OF MALFUNCTIONꢎ )F AN INPUT PIN IS UNCONNECTEDꢍ IT IS
POSSIBLE THAT AN INTERNAL INPUT LEVEL MAY BE GENERATED DUE TO NOISEꢍ ETCꢎꢍ CAUSING MALFUNCTIONꢎ #-/3
DEVICES BEHAVE DIFFERENTLY THAN "IPOLAR OR .-/3 DEVICESꢎ )NPUT LEVELS OF #-/3 DEVICES MUST BE FIXED
HIGH OR LOW BY USING PULLꢃUP OR PULLꢃDOWN CIRCUITRYꢎ %ACH UNUSED PIN SHOULD BE CONNECTED TO 6$$ OR '.$
VIA A RESISTOR IF THERE IS A POSSIBILITY THAT IT WILL BE AN OUTPUT PINꢎ !LL HANDLING RELATED TO UNUSED PINS MUST
BE JUDGED SEPARATELY FOR EACH DEVICE AND ACCORDING TO RELATED SPECIFICATIONS GOVERNING THE DEVICEꢎ
02%#!54)/. !'!).34 %3$
ꢂ
! STRONG ELECTRIC FIELDꢍ WHEN EXPOSED TO A -/3 DEVICEꢍ CAN CAUSE DESTRUCTION OF THE GATE OXIDE AND
ULTIMATELY DEGRADE THE DEVICE OPERATIONꢎ 3TEPS MUST BE TAKEN TO STOP GENERATION OF STATIC ELECTRICITY AS
MUCH AS POSSIBLEꢍ AND QUICKLY DISSIPATE IT WHEN IT HAS OCCURREDꢎ %NVIRONMENTAL CONTROL MUST BE
ADEQUATEꢎ 7HEN IT IS DRYꢍ A HUMIDIFIER SHOULD BE USEDꢎ )T IS RECOMMENDED TO AVOID USING INSULATORS THAT
EASILY BUILD UP STATIC ELECTRICITYꢎ 3EMICONDUCTOR DEVICES MUST BE STORED AND TRANSPORTED IN AN ANTIꢃSTATIC
CONTAINERꢍ STATIC SHIELDING BAG OR CONDUCTIVE MATERIALꢎ !LL TEST AND MEASUREMENT TOOLS INCLUDING WORK
BENCHES AND FLOORS SHOULD BE GROUNDEDꢎ 4HE OPERATOR SHOULD BE GROUNDED USING A WRIST STRAPꢎ
3EMICONDUCTOR DEVICES MUST NOT BE TOUCHED WITH BARE HANDSꢎ 3IMILAR PRECAUTIONS NEED TO BE TAKEN FOR
07 BOARDS WITH MOUNTED SEMICONDUCTOR DEVICESꢎ
34!453 "%&/2% ).)4)!,):!4)/.
ꢃ
ꢄ
0OWERꢃON DOES NOT NECESSARILY DEFINE THE INITIAL STATUS OF A -/3 DEVICEꢎ )MMEDIATELY AFTER THE POWER
SOURCE IS TURNED /.ꢍ DEVICES WITH RESET FUNCTIONS HAVE NOT YET BEEN INITIALIZEDꢎ (ENCEꢍ POWERꢃON DOES
NOT GUARANTEE OUTPUT PIN LEVELSꢍ )ꢉ/ SETTINGS OR CONTENTS OF REGISTERSꢎ ! DEVICE IS NOT INITIALIZED UNTIL THE
RESET SIGNAL IS RECEIVEDꢎ ! RESET OPERATION MUST BE EXECUTED IMMEDIATELY AFTER POWERꢃON FOR DEVICES
WITH RESET FUNCTIONSꢎ
).054 /& 3)'.!, $52).' 0/7%2 /&& 34!4%
$O NOT INPUT SIGNALS OR AN )ꢉ/ PULLꢃUP POWER SUPPLY WHILE THE DEVICE IS NOT POWEREDꢎ 4HE CURRENT
INJECTION THAT RESULTS FROM INPUT OF SUCH A SIGNAL OR )ꢉ/ PULLꢃUP POWER SUPPLY MAY CAUSE MALFUNCTION AND
THE ABNORMAL CURRENT THAT PASSES IN THE DEVICE AT THIS TIME MAY CAUSE DEGRADATION OF INTERNAL ELEMENTSꢎ
)NPUT OF SIGNALS DURING THE POWER OFF STATE MUST BE JUDGED SEPARATELY FOR EACH DEVICE AND ACCORDING TO
RELATED SPECIFICATIONS GOVERNING THE DEVICEꢎ
All other product, brand, or trade names used in this publication are the trademarks
or registered trademarks of their respective trademark owners.
Product specifications are subject to change without notice. To ensure that you have the latest
product data, please contact your local NEC Electronics sales office.
Data Sheet A17989EE2V0DS00
49
µPD800261
The information in this document is current as of November, 2009.The information is subject
to change without notice. For actual design-in, refer to the latest publications of NEC Electronics
data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics
products. Not all products and/or types are available in every country. Please check with an
NEC Electronics sales representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the
prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any
errors that may appear in this document.
•
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or
other intellectual property rights of third parties by or arising from the use of NEC Electronics
products listed in this document or any other liability arising from the use of such products.
No license, express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided
for illustrative purposes in semiconductor product operation and application examples. The
incorporation of these circuits, software and information in the design of a customer's
equipment shall be done under the full responsibility of the customer. NEC Electronics
assumes no responsibility for any losses incurred by customers or third parties arising from
the use of these circuits, software and information.
•
•
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC
Electronics products, customers agree and acknowledge that the possibility of defects
thereof cannot be eliminated entirely. To minimize risks of damage to property or injury
(including death) to persons arising from defects in NEC Electronics products, customers
must incorporate sufficient safety measures in their design, such as redundancy, fire-
containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard",
"Special" and "Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a
customer-designated "quality assurance program" for a specific application. The recommended
applications of an NEC Electronics product depend on its quality grade, as indicated below.
Customers must check the quality grade of each NEC Electronics product before using it in
a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement
equipment, audio and visual equipment, home electronic appliances, machine tools, personal
electronic equipment and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems,
anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not
specifically designed for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control
systems, life support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified
in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products
in applications not intended by NEC Electronics, they must contact an NEC Electronics sales
representative in advance to determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also
includes its majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for
NEC Electronics (as defined above).
Data Sheet A17989EE2V0DS00
50
µPD800261
Regional Information
Some information contained in this document may vary from country to country. Before using any
NEC product in your application, please contact the NEC office in your country to obtain a list of
authorized representatives and distributors. They will verify:
•
•
•
•
•
Device availability
Ordering information
Product release schedule
Availability of related technical literature
Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
•
Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also
vary from country to country.
NEC Electronics (China) Co., Ltd
Beijing, P.R. China
NEC Electronics Corporation
Kawasaki, Japan
NEC Electronics (Europe) GmbH
Duesseldorf, Germany
Tel: 010-8235 1155
Fax: 010-8235 7679
Tel: 044-435 5111
Fax: 044-435 1667
Tel: 0211-65 030
Fax: 0211-65 03 1327
NEC Electronics Shanghai Ltd.
Shanghai, P.R. China
Tel: 021-5888 5400
NEC Electronics America Inc.
Santa Clara, California
Tel: 408-588 6000
Succursale Française
Vélizy-Villacoublay, France
Tel: 01-30 67 58 00
Fax: 01-30 67 58 99
Fax: 021-5888 5230
Fax: 408-588 6130
NEC Electronics Hong Kong Ltd.
Hong Kong
Filiale Italiana
Milano, Italy
Tel: 2886-9318
Fax: 2886-9022/9044
Tel: 02-66 75 41
Fax: 02-66 75 42 99
NEC Electronics Korea Ltd.
Seoul, Korea
Tel: 02-558 3737
Fax: 02-558 5141
Branch The Netherlands
Eindhoven, The Netherlands
Tel: 040-265 40 10
Fax: 040-244 45 80
NEC Electronics Singapore Pte.
Ltd.
Tyskland Filial
Taeby, Sweden
Singapore
Tel: 65-6253 8311
Fax: 65-6250 3583
Tel: 08-638 7200
Fax: 08-638 7222
United Kingdom Branch
Milton Keynes, UK
Tel: 01908-691 133
Fax: 01908-670 290
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-8175 9600
Fax: 02-8175 9670
Data Sheet A17989EE2V0DS00
51
相关型号：
©2020 ICPDF网 联系我们和版权申明