RFFM8850PSQ [RFMD]
Dualband 2.4GHz and 5.0GHz 802.11b/g/n/a/ac Wi-Fi® Switch LNA Front End Module;型号: | RFFM8850PSQ |
厂家: | RF MICRO DEVICES |
描述: | Dualband 2.4GHz and 5.0GHz 802.11b/g/n/a/ac Wi-Fi® Switch LNA Front End Module |
文件: | 总10页 (文件大小:300K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RFFM8850P
RFFM8850P
Dualband 2.4GHz and 5.0GHz 802.11b/g/n/a/ac
Wi-Fi® Switch + LNA Front End Module
Package: QFN, 16-pin,
2.3mm x 2.3mm x 0.33mm
The RFFM8850P provides a complete dualband integrated Switch +
LNA solution in a single Front End Module (FEM) for Wi-Fi®
802.11b/g/n/a/ac and Bluetooth® systems. The ultra-small form factor
and integrated matching greatly reduces the number of external
components and layout area. The RFFM8850P integrates a 2.4GHz
SP3T Transmit/Receive Switch, a 5.0GHz SP2T Transmit/Receive
Switch, a 2.4GHz Low Noise Amplifier with bypass mode, and a 5.0GHz
Low Noise Amplifier with bypass mode.
Features
■
Dualband 2.4GHz & 5.0GHz
Wi-Fi® SW+LNA FEM
■
2.4GHz SP3T T/R Switch with
Bluetooth® Support
■
■
■
■
2.4GHz LNA with Bypass Mode
5.0GHz SP2T T/R Switch
5.0GHz LNA with Bypass Mode
16
15
14
13
All Input and Output Ports Matched
to 50Ω
12
11
10
9
1
2
3
4
VTX5
VRX5
VBT
■
■
Wide Voltage Supply Range
Supports Wi-Fi® chipsets with
Integrated Power Amplifier (iPA)
BT
■
■
Small Package for Chip on Board
Designs
RX5
VDD2
LNA_EN2
Low Profile Package for Module
Designs
LNA_EN5
Applications
5
6
7
8
■
■
■
■
■
■
■
■
Mobile Devices
Smartphones
Cellular Handsets
Tablets
Functional Block Diagram
Ordering Information
Consumer Electronics
Gaming
RFFM8850PSB
RFFM8850PSQ
RFFM8850PSR
RFFM8850PTR7
Standard 5-piece sample bag
Standard 25-piece sample bag
Standard 100-piece reel
Netbooks/Notebooks
TV/Monitors/Video
Standard 2500-piece reel
RFFM8850PPCK-410 Fully assembled evaluation board w/ 5-piece bag
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150107
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 10
Absolute Maximum Ratings
Caution! ESD sensitive device.
Parameter
Rating
Unit
DC Supply Voltage (No RF Applied)
DC Supply Current
6
V
100
mA
°C
°C
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
Operating Case Temperature
Storage Temperature
-40 to +85
-40 to +150
Maximum TX Input Power into 50Ω Load for
+30
dBm
11b/g/n/ac (No Damage) 2.4GHz and 5.0GHz
Maximum RX Input Power (No Damage)
+12
+25
dBm
dBm
Bypass Mode Maximum RX input power (No damage)
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Moisture Sensitivity
MSL2
Nominal Operating Parameters
Specification
Parameter
Unit Condition
Min
Typ
Max
General Specifications
Operating Frequency
2.412
5.18
4.9
2.484
5.825
5.925
85
GHz
GHz
GHz
°C
2.4GHz Band
5.0GHz Band
5.0GHz Band
Operating Frequency
Extended Frequency
Operating Temperature
Power Supply - VDD2,VDD5
2G Control Voltage-High
2G Control Voltage-Low
5G Control Voltage-High
-40
25
3.6
3.1
0
3.0
5.0
V
2.8
VDD2
0.2
V
VTX2, LNA-EN2, and VBT should not exceed VDD2
VTX5, LNA-EN5, and VRX5 should not exceed VDD5
V
2.8
3.1
VDD5
V
5G Control Voltage-Low
0
0.2
V
V
V
ESD – Human Body Model
ESD – Charge Device Model
1000
1000
Transmit (TX2-ANT2)
2.4GHz Band, VDD2 = 3.6V, unless otherwise noted
Insertion Loss
0.6
20
20
30
35
1.2
dB
dB
T = 25°C, VDD2 = 3.6V
TX Port Return Loss
ANT Port Return Loss
Nominal Input P0.1dB
ANT-RX Isolation
12
12
27
28
dB
dBm
dB
T = 25°C, VDD2 = 3.6V
TX Mode enabled and at maximum power
Receive (ANT2-RX2)-LNA On
2.4GHz Band, VDD2 = 3.6V, unless otherwise noted
Gain (S21)
12
11
-1
14
14
17
18
+1
+1
2.7
dB
dB
dB
dB
dB
T =25°C, VDD2 = 3.6V
T =-40 to +85C°, VDD2 = 3.0V to 5V
Gain Flatness over any 20MHz BW
Gain Flatness across band
Noise Figure - Nominal
-1
1.8
2.2
T = 25°C, VDD2 = 3.6V
Noise Figure
1.3
10
5
2.5
15
8
3.1
25
10
12
dB
dB
dB
T = -40 to +85°C, VDD2 = 3.0 to 5.0V, F = 2400 - 2500MHZ
RX2 Port Return Loss
ANT2 Port Return Loss - Nominal
T = 25°C, VDD2 = 3.6V
4
7.5
ANT2 Port Return Loss
Input P1dB - Nominal
dB
dBm
mA
All Conditions
-8
6
-6.5
9
T = 25°C, VDD2 = 3.6V
T = 25°C, VDD2 = 3.6V
Current Consumption -Nominal
13
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150107
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
2 of 10
RFFM8850P
Specification
Typ
Parameter
Unit Condition
Min
Max
Receive (ANT2-RX2)-LNA On
LNA_EN2 Control Current
LNA Turn On Time
2.4GHz Band, VDD2 = 3.6V, unless otherwise noted
50
100
500
µA
nS
200
Receive (ANT2-RX2)-LNA
Bypass Mode
2.4GHz Band, VDD2 = 3.6V, unless otherwise noted
Insertion Loss - Nominal
RX Port Return Loss - Nominal
ANT Port Return Loss - Nominal
Input P1dB
4
5
7
dB
dB
T= 25°C, VDD2 = 3.6V
10
12
20
20
10
15
dB
+17
+21
dBm
Bluetooth TX/RX Mode
2.4GHz Band, VDD2 = 3.6, unless otherwise noted
Input P0.1dB
+24
0.3
12
+28
0.6
18
+32
1.3
dBm
dB
T = 25°C, VDD2 = 3.6V
Insertion Loss
BT Port Return Loss
ANT2 Port Return Loss
dB
12
18
dB
Control Line Specifications
2.4GHz Band, VDD2 = 3.6, unless otherwise noted
Control Line Impedance – VTX2
Control Line Impedance – LNAEN2
Control Line Impedance - VBT
Leakage Current – VDD2
40
66
40
0.2
5
MΩ
KΩ
MΩ
µA
10
2G Switch Control Current-High-Each
Line
100
µA
2G Switch Control Current-Low-Each
Line
0.5
1
µA
ns
Switching Speed
100
500
Transmit (TX5-ANT5)
5.0GHz Band, VDD5 = 3.6V, unless otherwise noted
Insertion Loss - Nominal
0.2
12
12
28
0.8
25
25
30
1.8
dB
dB
T = 25C°, VDD5 = 3.6V
TX5 Port Return Loss - Nominal
ANT5 Port Return Loss - Nominal
Input P0.1dB - Nominal
dB
31.5
25
dBm
T = 25°C, VDD5 = 3.6V
T = 25°C, VDD5 = 3.6V
Max Linear Input power (<1% EVM) -
Nominal
20
23
dBm
Max Linear Input power (<1% EVM) -
Over VT
19
28
21
35
25
dBm
dB
All Conditions
ANT5-RX5 Isolation
TX Mode enabled and at maximum power
Receive (ANT5-RX5)-LNA On
Gain - Nominal
5.0GHz Band, VDD5 = 3.6V, unless otherwise noted
10
14
13
15
dB
T = 25°C, VDD5 = 3.6V
All conditions
Gain
9
-0.5
-1
18
+0.5
+1
dB
dB
dB
dB
Gain flatness over any 80MHz BW
Gain flatness across band
Noise Figure-Nominal
T = 25°C, VDD5 = 3.6V
2.3
3
Noise Figure
2.5
12
8
3.5
T = -40 to +85°C, VDD5 = 3.0 to 5.0V
Rx5 Port Return Loss - Nominal
ANT5 Port Return Loss - Nominal
Nominal Input P1dB
8
5
dB
dB
-7.5
6
-5
dBm
mA
µA
T= 25°C, VDD5 = 3.6V
Current Consumption
10
140
13
LNA_EN5 Control Current
50
200
LNA Turn On Time
400
600
nS
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 10
RFFM8850P
Specification
Typ
Parameter
Unit Condition
Min
Max
Receive (ANT5-RX5)-Bypass
Mode
5.0GHz Band, VDD5 = 3.6V, unless otherwise noted
Insertion Loss - Nominal
RX5 Port Return Loss
5
7
12
dB
dB
T = 25°C, VDD5 = 3.6V
10
15
ANT5 Port Return Loss
Input P1dB
12
20
dB
+18
+21
dBm
T = 25°C, VDD5 = 3.6V
Control Line Specifications
5.0GHz Band, VDD5 = 3.6V, unless otherwise noted
VDD5 Leakage Current - Nominal
Control Line Impedance – VTX5
Control Line Impedance – LNA_EN5
Control Line Impedance – VRX5
Leakage Current – VDD5
0
0.2
40
66
40
0.2
5
10
uA
MΩ
kΩ
MΩ
µA
10
5G Switch Control Current – High -
Each Line
100
µA
5G Switch Control Current – Low -
Each Line
0.5
1
µA
ns
T = 25°C, VDD5 = 3.6V
Switching Speed
100
500
Isolation
VDD2 = 3.6V and VDD5 = 3.6V, unless otherwise noted
ANT5 to RX5
25
dB
ANT2 to RX2
25
40
dB
dB
ANT5 to ANT2
Switch Control Logic Truth Table
Operating Mode
VTX2
LNAEN2
VBT
VTX5
LNAEN5
VRX5
Low
Low
Low
802.11b/g/n Rx Bypass - Standby
High
Low
Low
Low
High
Low
Low
Low
High
802.11b/g/n TX2 Mode
802.11b/g/n RX2 Gain Mode
BT TX
Low
High
Low
Low
Low
Low
High
Low
Low
Low
High
High
5.0 GHz Standby Mode
802.11a/n/ac TX5 Mode
802.11a/n/ac RX5 Gain Mode
802.11a/n/ac RX5 Bypass Mode
Note: 2G: High = 2.8 to VDD2, Low = 0V to 0.2V, and 5G: High = 2.8 to VDD5, Low = 0V to 0.2V.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 10
RFFM8850P
Timing Diagram 2.4GHz Control
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 10
RFFM8850P
Timing Diagram 5.0GHz Control
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
6 of 10
RFFM8850P
Applications Schematic
RFFM8850P
*Note If PIN 11 (BT) is not used then that port should be left open.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
7 of 10
RFFM8850P
Pin Out
16
15
14
13
12
11
10
9
1
2
3
4
VTX5
VRX5
VBT
BT
RX5
VDD2
LNA_EN2
LNA_EN5
5
6
7
8
Package Drawing
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
8 of 10
RFFM8850P
PCB Patterns
Note:
Thermal vias for center slug “C” should be incorporated into the PCB design. The number and size of thermal vias will depend on the application,
power, dissipation and electrical requirements. Example of the number and size of vias can be found on the RFMD evaluation board layout (gerber
files are available upon request)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
9 of 10
RFFM8850P
Pin Names and Descriptions
Pin
1
Name
VTX5
VRX5
RX5
Description
5 GHz TX switch control voltage. Refer to logic table for proper settings
2
5 GHz RX switch control voltage. Refer to logic table for proper settings
RF output port for the 5 GHz LNA. This port is matched to 50Ω and DC blocked internally
5 GHz LNA enable voltage. Refer to logic table for proper settings
3
4
LNA_EN5
VDD5
TX5
5
Supply voltage for the 5 GHz LNA. See applications schematic for biasing and bypassing components.
RF input port for the TX throw of the 5 GHz T/R switch. An external DC block is required
RF input port for the TX throw of the 2.4 GHz T/R switch. An external DC block is required
RF output port for the 2.4 GHz LNA. This port is matched to 50Ω and DC blocked internally
2.4 GHz LNA enable voltage. Refer to logic table for proper settings
6
7
TX2
8
RX2
9
LNA_EN2
VDD2
BT
10
11
12
13
14
15
16
Supply voltage for the 2.4 GHz LNA. See applications schematic for biasing and bypassing components.
RF bidirectional port for Bluetooth®. Input is matched to 50Ω. An external DC block is required
Bluetooth® switch control pin. See truth table for proper level.
VBT
ANT2
VTX2
NC
2.4 GHz RF bidirectional antenna port matched to 50Ω. An external DC block is required.
2.4 GHz TX switch control voltage. Refer to logic table for proper settings
This pin is not connected internally and can be left floating or connected to ground.
5 GHz RF bidirectional antenna port matched to 50Ω. An external DC block is required.
ANT5
Ground connection. The backside of the package should be connected to the ground plane through a short path,
i.e., PCB vias under the device are recommended.
Pkg Base
GND
*Note If PIN 11 (BT) is not used then that port should be left open.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150107
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
10 of 10
相关型号:
©2020 ICPDF网 联系我们和版权申明