RF1171 [RFM]
418.0 MHz SAW Filter; 418.0 MHz的SAW滤波器型号: | RF1171 |
厂家: | RF MONOLITHICS, INC |
描述: | 418.0 MHz SAW Filter |
文件: | 总2页 (文件大小:155K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
RF1171
•
•
•
•
•
Ideal Front-End Filter for Wireless Receiver in the UK and USA
Low-Loss, Coupled-Resonator Quartz Design
Simple External Impedance Matching
418.0 MHz
SAW Filter
Rugged TO39 Hermetic Package
Complies with Directive 2002/95/EC (RoHS)
Pb
The RF1171 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 418.0 MHz receivers. Receiver designs using this filter include superhet with
10.7 MHz direct conversion and superregen. Typical applications of these receivers are wireless remote-
control and security devices operating in the USA under FCC Part 15.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater
than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM’s ad-
vanced SAW design and fabrication technology is utilized to achieve high performance and very low loss with
simple external impedance matching (not included). Quartz construction provides excellent frequency stabil-
ity over a wide temperature range.
TO39-3 Case
Electrical Characteristics
Characteristic
Sym
Notes
Minimum
Typical
Maximum
Units
Nominal Frequency
f
417.920
418.080
MHz
c
1, 2
Tolerance from 418.0 MHz
Dfc
IL
±80
5.5
dB
dB
Insertion Loss
1
3.0
3 dB Bandwidth
BW
500
40
600
800
1, 2
kHz
3
Rejection
at f - 21.4 MHz (Image)
50
30
80
C
at f - 10.7 MHz (LO)
1
15
dB
C
Ultimate
Temperature
Operating Case Temp.
T
T
-35
15
+85
35
°C
°C
C
Turnover Temperature
Turnover Frequency
Freq. Temp. Coefficient
25
O
3, 4
f
f
MHz
O
C
2
FTC
0.032
ppm/°C
Frequency Aging
Absolute Value during the First Year
Series Inductance
|fA|
L
5
1
£10
ppm/yr
nH
External Impedance
6 Turns of 0.3 mm Insulated Copper, 1.9 mm ID
Shunt Capacitance
C
12
pF
Lid Symbolization (in addition to Lot and/or Date Codes)
RFM RF1171
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 W test system with
VSWR £ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f . Note that insertion loss, bandwidth,
c
and passband shape are dependent on the impedance matching component values and quality.
2. The frequency f is defined as the midpoint between the 3dB frequencies.
c
3. Unless noted otherwise, specifications apply over the entire specified operating temperature range.
4. The turnover temperature, T , is the temperature of maximum (or turnover) frequency, f . The nominal frequency at any case temperature, T , may
O
o
c
2
be calculated from: f = f [1 - FTC (T - T ) ].
o
o
c
5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change without notice.
7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
RF Monolithics, Inc.
RFM Europe
Phone: (972) 233-2903
Phone: 44 1963 251383
Fax: (972) 387-9148
Fax: 44 1963 251510
E-mail: info@rfm.com
http://www.rfm.com
RF1171-082201
Page 1 of 2
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
418.0 MHz
Absolute Maximum Ratings
Incident RF Power
SAW Filter
Rating
Value
Units
+13
±30
dBm
VDC
DC Voltage Between Any Two Pins (Observe ESD Precautions)
5
-45 to +85
°C
Case Temperature
Typical Filter Response
Typical filter responses are shown below. The actual response is depen-
dent on external impedance matching and circuit layout. Illustrated fre-
quencies and minimum rejection for LO and IMAGE are shown only for
superhet receivers with 10.7 MHz IF.
0
dB
-1
0
-10
-2
-3
-4
-5
-6
-7
-8
LO
-20
-30
Min 3dB
Passband
at 25oC
-40
Image
-50
-60
-70
-80
150 KHz/div
Frequency
5 MHz/div
Frequency
Case Design
Electrical Connections
C
G
Bottom View
B
Pin
Connection
Pin 1
Pin 2
Pin 3
H
1
2
3
Input or Output
Output or Input
Case Ground
F
E
A
D
(3 places)
J
(2 places)
45°
Typical Demonstration Circuit
L
L
Millimeters
Inches
Dimensions
1
2
3
From 50
W
Network
Analyzer
W
To 50
Min
Max
Min
Max
C
C
Network
Analyzer
A
B
C
D
E
F
9.40
3.18
3.50
0.370
0.125
0.138
2.50
0.098
0.46 Nominal
0.018 Nominal
0.200 Nominal
0.100 Nominal
0.100 Nominal
5.08 Nominal
2.54 Nominal
2.54 Nominal
G
H
J
1.02
0.040
1.40
0.055
RF Monolithics, Inc.
RFM Europe
Phone: (972) 233-2903
Phone: 44 1963 251383
Fax: (972) 387-9148
Fax: 44 1963 251510
E-mail: info@rfm.com
http://www.rfm.com
RF1171-082201
Page 2 of 2
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明