RP1032 [RFM]

674.03 MHz SAW Resonator; 674.03 MHz的SAW谐振器
RP1032
型号: RP1032
厂家: RF MONOLITHICS, INC    RF MONOLITHICS, INC
描述:

674.03 MHz SAW Resonator
674.03 MHz的SAW谐振器

谐振器
文件: 总2页 (文件大小:91K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
®
RP1032  
Designed for 674 MHz CATV Local Oscillators  
Nominal Insertion Phase Shift of 180° at Resonance  
Quartz Stability  
674.03 MHz  
SAW  
Rugged, Hermetic, Low-Profile TO39 Case  
Complies with Directive 2002/95/EC (RoHS)  
Pb  
Resonator  
The RP1032 is a two-port, 180° surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It pro-  
vides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency oscillators operating at or  
near 674 MHz. Typical applications include the second LO in CATV set-top convertors with channel 3 output.  
Absolute Maximum Ratings  
Rating  
Value  
+5  
Units  
dBm  
VDC  
°C  
CW RF Power Dissipation (See: Typical Test Circuit.)  
DC Voltage Between Any Two Pins (Observe ESD Precautions)  
Case Temperature  
±30  
TO39-3 Case  
-40 to +85  
Electrical Characteristics  
Characteristic  
Sym  
Notes  
Minimum  
Typical  
Maximum  
Units  
f
Frequency (+25°C)  
Nominal Frequency  
673.930  
674.130  
MHz  
C
2, 3, 4, 5,  
Df  
Tolerance from 674.030 MHz  
±100  
12.5  
kHz  
dB  
C
Insertion Loss  
Quality Factor  
IL  
2, 5, 6  
5, 6, 7  
8.9  
8,400  
5,400  
73  
Q
Unloaded Q  
U
Q
50 W Loaded Q  
L
T
°C  
Temperature Stability  
Turnover Temperature  
Turnover Frequency  
Frequency Temp. Coefficient  
Absolute Value during First Year  
58  
1.0  
1.3  
88  
O
f
f +58  
kHz  
6, 7, 8  
O
C
2
FTC  
0.037  
10  
ppm/°C  
|f |  
1, 6  
5
Frequency Aging  
ppm/yr  
MW  
W
A
DC Insulation Resistance between Any Two Pins  
RF Equivalent RLC  
R
Motional Resistance  
Motional Inductance  
Motional Capacitance  
Shunt Capacitance  
180  
358.641  
0.155461  
1.6  
322  
1.9  
M
L
5, 6, 7, 9  
5, 6, 9  
µH  
M
C
fF  
M
C
pF  
O
Lid Symbolization (in addition to Lot and/or Date Codes)  
RFM 1032-3  
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.  
Notes:  
1. Frequency aging is the change in f with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above  
C
+65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.  
2. The frequency f is the frequency of minimum IL with the resonator in the specified test fixture in a 50 W test system with VSWR £ 1.2:1. Typically, f  
C
OS-  
or f  
is less than the resonator f .  
C
CILLATOR  
TRANSMITTER  
3. One or more of the following United States patents apply: 4,454,488; 4,616,197.  
4. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer.  
5. Unless noted otherwise, case temperature T = +25°C± 5°C  
C
6. The design, manufacturing process, and specifications of this device are subject to change without notice.  
7. Derived mathematically from one or more of the following directly measured parameters: f , IL, 3 dB bandwidth, f versus T , and C .  
C
C
C
O
8. Turnover temperature, T , is the temperature of maximum (or turnover) frequency, f . The nominal frequency at any case temperature, T , may be cal-  
O
O
C
2
culated from: f = f [1 - FTC (T - T ) ]. Typically, oscillator T is 20° less than the specified resonator T .  
O
O
C
O
O
9. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance C is  
O
the measured static (nonmotional) capacitance between either pin 1 and ground or pin 2 and ground. The measurement includes case parasitic capaci-  
tance.  
RF Monolithics, Inc.  
RFM Europe  
Phone: (972) 233-2903  
Phone: 44 1963 251383  
Fax: (972) 387-9148  
Fax: 44 1963 251510  
E-mail: info@rfm.com  
http://www.rfm.com  
RP1032-102699  
Page 1 of 2  
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.  
674.03 MHz  
SAW Resonator  
Electrical Connections  
Equivalent LC Model  
This two-port, three-terminal SAW resonator is bidirectional. However, im-  
pedances and circuit board parasitics may not be symmetrical, requiring  
slightly different oscillator component-matching values.  
The following equivalent LC model is valid near resonance:  
2
1
L
M
C
R
o
M
M
C
C
o
Bottom View  
Pin  
Connection  
3
Pin 1  
Pin 2  
Pin 3  
1
2
3
Input or Output  
Output or Input  
Case Ground  
Temperature Characteristics  
fC = fO , T C = TO  
0
The curve shown on the right  
accounts for resonator con-  
tribution only and does not  
include LC component tem-  
0
-50  
-50  
Typical Test Circuit  
-100  
-100  
-150  
perature contributions.  
-150  
Power Test  
Electrical Test  
-200  
-200  
-80 -60 -40 -20  
0
+20 +40 +60 +80  
To 50W  
Network  
Analyzer  
From 50W  
Network  
Analyzer  
2
P
1
INCIDENT  
T = TC - TO ( °C )  
D
Low-Loss  
Matching  
Network  
1
2
3
50W  
Source at  
P
REFLECTED  
F
C
to50  
W
3
-
CW RF Power Dissipation =  
P
P
Typical Frequency Response  
REFLECTED  
INCIDENT  
The plot shown below is a typical frequency response for the RP series of  
two-port resonators. The plot is for RP1094.  
-10.0  
-20.0  
-30.0  
-40.0  
-50.0  
-60.0  
200.0  
100.0  
0.0  
Typical Application Circuits  
This SAW resonator can be used in oscillator or transmitter designs that  
require 180° phase shift at resonance in a two-port configuration. One-  
port resonators can be simulated, as shown, by connecting pins 1 and 2  
-100.0  
-200.0  
-300.0  
-400.0  
-500.0  
-600.0  
-700.0  
-800.0  
together. However, for most low-cost consumer products, this is only  
recommended for retrofit applications and not for new designs.  
Conventional Two-Port Design:  
Simulated One-Port Design:  
1
2
901.2  
905.2  
909.2  
913.2  
917.2  
921.2  
925.2  
929.2  
Frequency (MHz)  
Phasing  
& Match  
Phasing  
& Match  
3
Millimeters  
Inches  
Dimensions  
Case Design  
Min  
Max  
Min  
Max  
A
B
C
D
E
F
9.40  
3.18  
3.50  
0.370  
0.125  
0.138  
C
G
B
2.50  
0.098  
H
0.46 Nominal  
0.018 Nominal  
0.200 Nominal  
0.100 Nominal  
0.100 Nominal  
F
E
A
5.08 Nominal  
2.54 Nominal  
2.54 Nominal  
D
(3 places)  
G
H
J
1.02  
0.040  
J
(2 places)  
45°  
1.40  
0.055  
RF Monolithics, Inc.  
RFM Europe  
Phone: (972) 233-2903  
Phone: 44 1963 251383  
Fax: (972) 387-9148  
Fax: 44 1963 251510  
E-mail: info@rfm.com  
http://www.rfm.com  
RP1032-102699  
Page 2 of 2  
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.  

相关型号:

RP1033

2-Port Saw Resonator, 668.03MHz Nom, RUGGED, HERMETIC, LOW-PROFILE, TO-39, 3 PIN
MURATA

RP103K

MARK INFORMATIONS SERIES MARK SPECIFICATION
RICOH

RP103K121B

LOW NOISE 150mA LDO REGULATOR
RICOH

RP103K121B-TR

Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, CMOS, DFN-4
RICOH

RP103K121D

LOW NOISE 150mA LDO REGULATOR
RICOH

RP103K121D-TR

Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, CMOS, DFN-4
RICOH

RP103K122B-TR

Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, DFN-4
RICOH

RP103K122D-TR

Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, DFN-4
RICOH

RP103K131B

LOW NOISE 150mA LDO REGULATOR
RICOH

RP103K131B-TR

Fixed Positive LDO Regulator, 1.3V, 0.5V Dropout, CMOS, DFN-4
RICOH

RP103K131D

LOW NOISE 150mA LDO REGULATOR
RICOH

RP103K131D-TR

Fixed Positive LDO Regulator, 1.3V, 0.5V Dropout, CMOS, DFN-4
RICOH