TRAP-S1 [RFSOLUTIONS]
TRAP Remote Control Systems;型号: | TRAP-S1 |
厂家: | RFSOLUTIONS.LTD |
描述: | TRAP Remote Control Systems |
文件: | 总8页 (文件大小:3180K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DS-TRAP-7
Page 2
RelayConnectionswhen
Transmitter NOTOperating
RelayConnectionswhen
Transmitter OPERATING
1.
2.
3.
4.
Open the enclosure by removing fixing screws from the enclosure
Remove the antenna and slide out the circuit board.
Connect the power supply screw terminals 12-32V ac or dc to the supply terminals.
Wire your desired connections to the relay switches
5.
Once all required wiring is complete, use the handheld QUANTA transmitter to switch the outputs on and
off.
6.
7.
As supplied, the handheld will operate the outputs - button 1 to output 1, button 2 to output 2 etc.
Change the output functions to latching, / Momentary Operation.
NO
COM
NC
Relay
TRAP-RX
Relay
Relay
12V
0V
Supply
Terminals
DS-TRAP-7
Page 3
DS-TRAP-7
Page 4
Link Pins
LK1
LK2
DS-TRAP-7
Page 5
DS-TRAP-7
Page 6
Range Test Notes
Our Range Testing was conducted on Ditchling Beacon providing an open Line of Sight Test.
1.
2.
Receiver was mounted on the Bonnet of our vehicle in the Beacon Car park
The transmitter was carried along the beacon whilst being repeatedly operated. At full distance the Trans-
mitter was also tested while placed on the ground. The transmitter was operated for long and short bursts.
3.
4.
5.
2KM range was achieved, the system was working 100% however testing ceased as we ran out of land.
Weather Conditions
Warm, Dry, Sunny, Broken Cloud, 20degC
Ditchling
Beacon
DS-TRAP-7
Page 7
50.00
All Dimensions in mm
82.00
相关型号:
TRAPC3M1T15X
Circular Connector, 3 Contact(s), Polyethylene, Male, Solder Terminal, ROHS COMPLIANT
SWITCH
TRAPC3MS1T15X
Circular Connector, 3 Contact(s), Polyethylene, Male, Solder Terminal, ROHS COMPLIANT
SWITCH
©2020 ICPDF网 联系我们和版权申明