R1160N241B-TR-FE [RICOH]
Fixed Positive LDO Regulator, 2.4V, 0.3V Dropout, CMOS, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN;型号: | R1160N241B-TR-FE |
厂家: | RICOH ELECTRONICS DEVICES DIVISION |
描述: | Fixed Positive LDO Regulator, 2.4V, 0.3V Dropout, CMOS, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN 光电二极管 输出元件 调节器 |
文件: | 总31页 (文件大小:403K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
R1160x SERIES
3-MODE 200mA LDO REGULATOR
OUTLINE
NO.EA-083-130415
The R1160x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy, low
supply current, and low ON-resistance. Each of these voltage regulator ICs consists of a voltage reference unit,
an error amplifier, resistors for setting Output Voltage, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. To prevent the destruction by over
current, current limit circuit is included. The R1160x Series have 3-mode. One is standby mode with CE or
standby control pin. Other two modes are realized with ECO pin™. Fast Transient Mode (FT mode) and Low
Power Mode (LP mode) are alternative with ECO pin™. Consumption current is reduced to 1/10 at Low Power
Mode compared with Fast Transient Mode. Output voltage is maintained between FT mode and LP mode.
The output voltage of these ICs is internally fixed with high accuracy. Since the packages for these ICs are
SOT-23-5 and SON-6 (Non-promotion) packages, high density mounting of the ICs on boards is possible.
FEATURES
• Supply Current (Low Power Mode)............................... Typ. 3.5μA (VOUT ≤ 1.5V)
• Supply Current (Fast Transient Mode).......................... Typ. 40μA
• Supply Current (Standby Mode).................................... Typ. 0.1μA
• Dropout Voltage ............................................................ Typ. 0.14V (IOUT=200mA, VOUT=2.8V)
• Ripple Rejection............................................................ Typ. 70dB (f=1kHz, FT Mode)
• Temperature-Drift Coefficient of Output Voltage........... Typ. ±100ppm/°C
• Line Regulation............................................................. Typ. 0.05%/V
• Output Voltage Accuracy............................................... ±2.0% (±3.0% at LP Mode)
• Output Voltage Range................................................... 0.8V to 3.3V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
• Input Voltage Range ..................................................... 1.4V to 6.0V
• Built-in Fold Back Protection Circuit ............................. Typ. 50mA (Current at short mode)
• Packages ..................................................................... SOT-23-5, SON-6 (Non-promotion)
APPLICATIONS
• Precision Voltage References.
• Power source for electrical appliances such as cameras, VCRs and hand-held communication equipment.
• Power source for battery-powered equipment.
1
R1160x
BLOCK DIAGRAMS
R1160xxx1A
R1160xxx1B
ECO
ECO
VDD
VOUT
VDD
V
OUT
Vref
Current
Vref
Current
Limit
Limit
GND
CE
GND
CE
SELECTION GUIDE
The output voltage, chip enable polarity, and package, etc. for the ICs can be selected at the user’s request.
Product Name
Package
Quantity per Reel
Pb Free
Halogen Free
SOT-23-5
3,000 pcs
Yes
Yes
R1160Nxx1∗-TR-FE
SON-6
(Non-promotion)
3,000 pcs
Yes
Yes
R1160Dxx1∗-TR-FE
xx: The output voltage can be designated in the range from 0.8V(08) to 3.3V(33) in 0.1V steps.
(For other voltages, please refer to MARK INFORMATIONS.)
∗ : CE pin polarity are options as follows.
(A) "L" active type.
(B) "H" active type.
The products scheduled to be discontinued : "Non-promotion"
These products will be discontinued in the future. We advise you to select other products.
2
R1160x
PIN CONFIGURATION
• SOT-23-5
• SON-6
Top View
Bottom View
5
4
6
5
4
4
5
6
∗
(mark side)
1
2
3
1
2
3
3
2
1
PIN DESCRIPTIONS
• SOT-23-5
Pin No
Symbol
Pin Description
1
2
3
4
5
VDD
Input Pin
GND
Ground Pin
Chip Enable Pin
MODE alternative pin
Output Pin
CE
or CE
ECO
VOUT
• SON-6 (Non-promotion)
Pin No
Symbol
Pin Description
1
2
3
4
5
6
VDD
NC
Input Pin
No Connection
Output Pin
VOUT
ECO
GND
MODE alternative pin
Ground Pin
Chip Enable Pin
CE
or CE
∗) Tab suspension leads are GND level. (They are connected to the reverse side of this IC.)
The tab suspension leads should be open and do not connect to other wires or land patterns.
3
R1160x
ABSOLUTE MAXIMUM RATINGS
Symbol
Item
Rating
6.5
Unit
V
VIN
Input Voltage
(
VECO
VCE
V
Input Voltage ECO Pin)
−0.3 to VIN+0.3
−0.3 to VIN+0.3
−0.3 to VIN+0.3
250
(
V
CE
Input Voltage
Output Voltage
Output Current
or CE Pin)
VOUT
IOUT
V
mA
mW
mW
°C
°C
Power Dissipation (SOT-23-5)∗
Power Dissipation (SON-6) (Non-promotion)∗
420
PD
500
Topt
Tstg
Operating Temperature Range
−40 to 85
−55 to 125
Storage Temperature Range
∗) For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field.
The functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
4
R1160x
ELECTRICAL CHARACTERISTICS
• R1160xxx1A
Topt=25°C
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VIN=Set VOUT+1V, VECO=VIN
×0.98
×1.02
Output Voltage (FT Mode)
V
V
1μA ≤ IOUT ≤ 30mA∗1
(-30mV)
(30mV)
VOUT
VIN=Set VOUT+1V, VECO=GND
1μA ≤ IOUT ≤ 30mA∗2
×0.97
(-45mV)
×1.03
(45mV)
Output Voltage (LP Mode)
IOUT
Output Current
200
mA
mV
VIN −VOUT=1V
VIN=Set VOUT+1V, VECO=VIN
1mA ≤ IOUT ≤ 200mA
Load Regulation (FT Mode)
20
10
40
40
ΔVOUT/ΔIOUT
VIN=Set VOUT+1V, VECO=GND
1mA ≤ IOUT ≤ 100mA
Load Regulation (LP Mode)
mV
Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT
VOLTAGE
VDIF
ISS1
Dropout Voltage
Supply Current (FT Mode)
40
70
VIN=Set VOUT+1V, VECO=VIN,
μA
μA
VIN=Set VOUT+1V,
VOUT ≤ 1.5V, VECO=GND
3.5
6.0
ISS2
Supply Current (LP Mode)
VIN=Set VOUT+1V,
4.5
0.1
8.0
1.0
μA
μA
VOUT ≥ 1.6V, VECO=GND
VIN=VCE=Set VOUT+1V
VECO=GND or VIN
Istandby
Supply Current (Standby)
Line Regulation (FT Mode)
Set VOUT+0.5V ≤ VIN ≤ 6V
IOUT=30mA, VECO=VIN
(In case that VOUT ≤ 0.9V,
1.4V ≤ VIN ≤ 6V)
0.05
0.20
0.30
%/V
%/V
ΔVOUT/ΔVIN
Set VOUT+0.5V ≤ VIN ≤ 6V
IOUT=30mA, VECO=GND
(In case that VOUT ≤ 0.9V,
1.4V ≤ VIN ≤ 6V)
Line Regulation (LP Mode)
0.10
70
f=1kHz, Ripple 0.2Vp-p
VIN=Set VOUT+1V
IOUT=30mA, VECO=VIN
RR
Ripple Rejection (FT Mode)
Input Voltage
dB
V
VIN
1.4
6.0
ppm
/°C
ΔVOUT/
ΔTopt
Output Voltage
Temperature Coefficient
IOUT=30mA
−40°C ≤ Topt ≤ 85°C
±100
ISC
Short Current Limit
50
5.0
5.0
mA
MΩ
MΩ
V
VOUT=0V
RPUC
RPDE
VCEH
VCEL
2.0
1.5
1.0
0
14.0
14.0
VIN
CE
Pull-up Resistance
ECO
Pull-down Resistance
CE
CE
,ECO Input Voltage "H"
,ECO Input Voltage "L"
0.3
V
∗1 : ±30mV Tolerance for VOUT ≤ 1.5V
∗2 : ±45mV Tolerance for VOUT ≤ 1.5V
5
R1160x
• R1160xxx1B
Topt=25°C
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VIN=Set VOUT+1V, VECO=VIN
×0.980
×1.020
Output Voltage (FT Mode)
Output Voltage (LP Mode)
V
V
1μA ≤ IOUT ≤ 30mA∗1
(-30mV)
(30mV)
VOUT
VIN=Set VOUT+1V,VECO=GND
1μA ≤ IOUT ≤ 30mA∗2
×0.970
(-45mV)
×1.030
(45mV)
IOUT
Output Current
200
mA
mV
VIN−VOUT=1V
VIN=Set VOUT+1V, VECO=VIN
1mA ≤ IOUT ≤ 200mA
Load Regulation (FT Mode)
20
10
40
40
ΔVOUT/ΔIOUT
VIN=Set VOUT+1V, VECO=GND
1mA ≤ IOUT ≤ 100mA
Load Regulation (LP Mode)
mV
Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT
VOLTAGE
VDIF
ISS1
Dropout Voltage
Supply Current (FT Mode)
40
70
VIN=Set VOUT+1V, VECO=VIN
μA
VIN=Set VOUT+1V,
VOUT ≤ 1.5V, VECO=GND
3.5
6.0
μA
ISS2
Supply Current (LP Mode)
VIN=Set VOUT+1V,
4.5
0.1
8.0
1.0
μA
μA
VOUT ≥ 1.6V, VECO=GND
VIN=Set VOUT+1V
VCE=GND, VECO=GND or VIN
Istandby
Supply Current (Standby)
Line Regulation (FT Mode)
Set VOUT+0.5V ≤ VIN ≤ 6.0V
IOUT=30mA, VECO=VIN
(In case that VOUT ≤ 0.9V,
1.4V ≤ VIN ≤ 6V)
0.05
0.20
0.30
%/V
%/V
ΔVOUT/ΔVIN
Set VOUT+0.5V ≤ VIN ≤ 6.0V
IOUT=30mA, VECO=GND
(In case that VOUT ≤ 0.9V,
1.4V ≤ VIN ≤ 6V)
Line Regulation (LP Mode)
0.10
70
f=1kHz, Ripple 0.2Vp-p
VIN=Set VOUT+1V
IOUT=30mA, VECO=VIN
RR
Ripple Rejection (FT Mode)
Input Voltage
dB
V
VIN
1.4
6.0
ppm
/°C
ΔVOUT/
ΔTopt
Output Voltage
Temperature Coefficient
IOUT=30mA
−40°C ≤ Topt ≤ 85°C
±100
ISC
Short Current Limit
50
5.0
5.0
mA
MΩ
MΩ
V
VOUT=0V
CE
RPDC
RPDE
VCEH
VCEL
2.0
1.5
1.0
0
14.0
14.0
VIN
Pull-down Resistance
ECO
Pull-down Resistance
CE, ECO Input Voltage "H"
CE, ECO Input Voltage "L"
0.3
V
∗1 : ±30mV Tolerance for VOUT ≤ 1.5V
∗2 : ±45mV Tolerance for VOUT ≤ 1.5V
6
R1160x
• ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE
Topt=25°C
Dropout Voltage VDIF (V)
Output Voltage
VOUT (V)
Condition
Typ.
0.40
0.30
0.20
Max.
0.8 ≤ VOUT ≤ 0.9
1.0 ≤ VOUT ≤ 1.4
1.5 ≤ VOUT ≤ 2.5
0.70
0.50
0.30
IOUT=200mA
0.20 (ECO="H")
0.25 (ECO="L")
2.6 ≤ VOUT
0.14
TEST CIRCUITS
C1=Tantal 1.0μF
C2=Tantal 2.2μF
OUT
V
DD
IOUT
VIN
R1160xxx1x
SERIES
A
C1
C2
GND
ECO
CE
Fig.1 Output Voltage vs. Output Current Test Circuit
OUT
V
DD
C1=Tantal 1.0μF
C2=Tantal 2.2μF
V
IN
R1160xxx1x
SERIES
I
OUT
C1
C2
GND
V
OUT
ECO
CE
V
Fig.2 Output Voltage vs. Input Voltage Test Circuit
7
R1160x
C1=Tantal 1.0μF
C2=Tantal 2.2μF
A
OUT
V
DD
R1160xxx1x
SERIES
VIN
C1
C2
GND
ECO
CE
Fig.3 Supply Current vs. Input Voltage Test Circuit
OUT
V
DD
VIN
I
OUT
R1160xxx1x
SERIES
=30mA
C1
C2
GND
C1=Tantal 1.0μF
C2=Tantal 2.2μF
V
OUT
ECO
CE
V
Fig.4 Output Voltage vs. Temperature Test Circuit
A
OUT
V
DD
I
SO
C1=Tantal 1.0μF
C2=Tantal 2.2μF
V
IN
R1160xxx1x
SERIES
A
C1
C2
GND
V
OUT
ECO
CE
Fig.5 Supply Current vs. Temperature Test Circuit
8
R1160x
V
V
DIF
OUT
V
DD
C1=Tantal 1.0μF
C2=Tantal 2.2μF
R1160xxx1x
SERIES
C1
C2
GND
ECO
CE
V
V
OUT
Fig. 6 Dropout Voltage vs. Output Current/ Set Output Voltage Test Circuit
VIN
VOUT
OUT
VDD
Pulse
Generator
R1160xxx1x
SERIES
IOUT
C2
GND
C2=Tantalum Capacitor
ECO
CE
Fig. 7 Ripple Rejection Test Circuit
VIN
VOUT
OUT
VDD
Pulse
Generator
R1160xxx1x
SERIES
IOUT
C2
C2=Tantalum Capacitor
GND
ECO
CE
Fig.8 Input Transient Response Test Circuit
9
R1160x
VOUT
OUT
V
DD
C1=Tantal 1.0μF
C2=Tantalum Capacitor
R1160xxx1x
SERIES
VIN
C1
C2
GND
I1
I2
ECO
CE
Fig.9 Load Transient Response Test Circuit
OUT
VDD
C1=Tantal 1.0μF
C2=Tantal 2.2μF
R1160xxx1x
SERIES
VIN
C1
C2
GND
ECO
CE
Function
Generator
Fig.10 Turn on Speed with CE pin Test Circuit
V
OUT
OUT
V
DD
V
IN
R1160xxx1x
SERIES
C1
C2
I
OUT
GND
Pulse
Generator
ECO
CE
C1=Tantalum 1.0μF
C2=Tantalum 2.2μF
Fig.11 MODE Transient Response Test Circuit
10
R1160x
Spectrum
Analyzer
OUT
VDD
C2
SR
S.A.
VIN
R1160xxx1x
SERIES
C1
GND
IOUT
C1=Ceramic 1.0μF
C2=Ceramic Capacitor
ECO
CE
Fig.12 Output Noise Test Circuit ( IOUT vs. ESR )
TYPICAL APPLICATION
OUT
V
DD
R1160xxx1x
SERIES
C1
C2
GND
C1=1.0μF
C2=2.2μF
ECO
CE
(External Components)
C1: Ceramic Capacitor 1μF
C2: Tantalum Capacitor 2.2μF
11
R1160x
TYPICAL CHARACTERISTICS
1) Output Voltage vs. Output Current
R1160x081x
R1160x081x
ECO=L
ECO=H
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.9
V
IN=2.8V
V
IN=2.8V
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
1.4V
1.4V
0
100
200
300
400
0
0
0
100
200
300
400
Output Current IOUT(mA)
Output Current IOUT(mA)
R1160x151x
R1160x151x
ECO=H
ECO=L
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
V
IN=3.5V
V
IN=3.5V
1.8V
1.8V
0
100
200
300
400
100
200
300
400
Output Current IOUT(mA)
Output Current IOUT(mA)
R1160x261x
R1160x261x
ECO=H
ECO=L
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
V
IN=4.6V
V
IN=4.6V
2.9V
2.9V
0
100
200
300
400
100
200
300
400
Output Current IOUT(mA)
Output Current IOUT(mA)
12
R1160x
R1160x331x
R1160x331x
ECO=H
ECO=L
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
V
IN=5.3V
V
IN=5.3V
3.6V
3.6V
0
100
200
300
400
0
100
200
300
400
Output Current IOUT(mA)
Output Current IOUT(mA)
2) Output Voltage vs. Input Voltage
R1160x081x
R1160x081x
ECO=H
ECO=L
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
R1160x151x
R1160x151x
ECO=H
ECO=L
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
13
R1160x
R1160x261x
R1160x261x
ECO=H
ECO=L
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
R1160x331x
R1160x331x
ECO=H
ECO=L
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
I
I
I
OUT= 1mA
OUT=30mA
OUT=50mA
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
3) Supply Current vs. Input Voltage
R1160x081x
R1160x081x
ECO=H
ECO=L
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
14
R1160x
R1160x151x
R1160x151x
ECO=L
ECO=H
8
7
6
5
4
3
2
1
0
70
60
50
40
30
20
10
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
R1160x261x
R1160x261x
ECO=H
ECO=L
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
R1160x331x
R1160x331x
ECO=H
ECO=L
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
15
R1160x
4) Output Voltage vs. Temperature
R1160x081x
R1160x081x
ECO=H
ECO=L
0.83
0.82
0.81
0.80
0.79
0.78
0.77
0.83
0.82
0.81
0.80
0.79
0.78
0.77
-50
-25
-25
-25
0
25
50
75
100
-50
-25
-25
-25
0
25
50
75
100
Temperature Topt(
°
°
°
C)
C)
C)
Temperature Topt(
°
°
°
C)
C)
C)
R1160x151x
R1160x151x
ECO=H
ECO=L
1.53
1.53
1.52
1.51
1.50
1.49
1.48
1.47
1.46
1.52
1.51
1.50
1.49
1.48
1.47
1.46
-50
0
25
50
75
100
-50
0
25
50
75
100
Temperature Topt(
Temperature Topt(
R1160x261x
R1160x261x
ECO=H
ECO=L
2.65
2.64
2.63
2.62
2.61
2.60
2.59
2.58
2.57
2.65
2.64
2.63
2.62
2.61
2.60
2.59
2.58
2.57
-50
0
25
50
75
100
-50
0
25
50
75
100
Temperature Topt(
Temperature Topt(
16
R1160x
R1160x331x
R1160x331x
ECO=H
ECO=L
3.37
3.35
3.33
3.31
3.29
3.27
3.25
3.23
3.37
3.35
3.33
3.31
3.29
3.27
3.25
3.23
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature Topt(
°C)
Temperature Topt(
°C)
5) Supply Current vs. Input Voltage
R1160x081x
R1160x081x
ECO=H
ECO=L
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature Topt(
°C)
Temperature Topt(°C)
R1160x151x
R1160x151x
ECO=H
ECO=L
70
8
7
6
5
4
3
2
1
0
60
50
40
30
20
10
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature Topt(
°C)
Temperature Topt(°C)
17
R1160x
R1160x261x
R1160x261x
ECO=H
ECO=L
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature Topt(
°
C)
Temperature Topt(°C)
R1160x331x
R1160x331x
ECO=H
ECO=L
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature Topt(
°
C)
Temperature Topt(°C)
6) Dropout Voltage vs. Output Current
R1160x081x
R1160x081x
ECO=H
ECO=L
0.6
0.6
0.5
0.4
0.3
0.2
0.1
0.0
85°C
85°C
25°C
-40°C
0.5
25°C
-40°C
0.4
0.3
0.2
0.1
0.0
0
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
0
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
18
R1160x
R1160x101x
R1160x101x
ECO=H
ECO=L
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
85°C
25°C
-40°C
85°C
25°C
-40°C
0
0
0
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
0
0
0
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
R1160x151x
R1160x151x
ECO=H
ECO=L
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.30
0.25
0.20
0.15
0.10
0.05
0.00
85°C
25°C
-40°C
85°C
25°C
-40°C
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
R1160x261x
R1160x261x
ECO=H
ECO=L
0.20
0.15
0.10
0.05
0.00
0.20
0.15
0.10
0.05
0.00
85°C
25°C
-40°C
85°C
25°C
-40°C
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
19
R1160x
R1160x331x
R1160x331x
ECO=H
ECO=L
0.20
0.20
0.15
0.10
0.05
0.00
85°C
25°C
-40°C
85°C
25°C
-40°C
0.15
0.10
0.05
0.00
0
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
0
25 50 75 100 125 150 175 200
Output Current IOUT(mA)
7) Dropout Voltage vs. Set Output Voltage (Topt=25°C)
R1160xxx1x
R1160xxx1x
ECO=H
ECO=L
0.45
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
I
OUT=10mA
30mA
50mA
120mA
200mA
IOUT=10mA
30mA
50mA
120mA
200mA
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Set Output Voltage VREG(V)
Set Output Voltage VREG(V)
8) Ripple Rejection vs. Input Bias (Topt=25°C)
R1160x261x
R1160x261x
Ripple 0.2Vp-p, IOUT=1mA,
Ripple 0.5Vp-p, IOUT=1mA,
C
IN; none, COUT=Tantal 2.2μF
C
IN; none, COUT=Tantal 2.2μF
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
f=400Hz
f=1kHz
f=10kHz
f=100kHz
f=400Hz
f=1kHz
f=10kHz
f=100kHz
2.60
2.70
2.80
2.90
3.00
3.10
2.60
2.70
2.80
2.90
3.00
3.10
Input Voltage VIN(V)
Input Voltage VIN(V)
20
R1160x
R1160x261x
R1160x261x
Ripple 0.2Vp-p, IOUT=30mA,
Ripple 0.5Vp-p, IOUT=30mA,
C
IN; none, COUT=Tantal 2.2μF
C
IN; none, COUT=Tantal 2.2μF
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
f=400Hz
f=1kHz
f=10kHz
f=100kHz
f=400Hz
f=1kHz
f=10kHz
f=100kHz
2.60
2.70
2.80
2.90
3.00
3.10
2.60
2.70
2.80
2.90
3.00
3.10
Input Voltage VIN(V)
Input Voltage VIN(V)
R1160x261x
R1160x261x
Ripple 0.5Vp-p, IOUT=50mA,
CIN; none, COUT=Tantal 2.2μF
Ripple 0.2Vp-p, IOUT=50mA,
CIN; none, COUT=Tantal 2.2μF
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
f=400Hz
f=1kHz
f=10kHz
f=100kHz
f=400Hz
f=1kHz
f=10kHz
f=100kHz
2.60
2.70
2.80
2.90
3.00
3.10
2.60
2.70
2.80
2.90
3.00
3.10
Input Voltage VIN(V)
Input Voltage VIN(V)
9) Ripple Rejection vs. Frequency
R1160x081x
R1160x081x
ECO=L, VIN1.8VDC+0.2Vp-p,
CIN; none, COUT=Tantal 2.2μF
ECO=H, VIN1.8VDC+0.2Vp-p,
IN; none, COUT=Tantal 2.2μF
C
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
21
R1160x
R1160x151x
R1160x151x
ECO=H, VIN2.5VDC+0.2Vp-p,
ECO=L, VIN2.5VDC+0.2Vp-p,
C
IN; none, COUT=Tantal 2.2μF
CIN; none, COUT=Tantal 2.2μF
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
R1160x261x
R1160x261x
ECO=L, VIN3.6VDC+0.2Vp-p,
CIN; none, COUT=Tantal 1.0μF
ECO=H, VIN3.6VDC+0.2Vp-p,
IN; none, COUT=Tantal 1.0μF
C
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
R1160x261x
R1160x261x
ECO=L, VIN3.6VDC+0.2Vp-p,
CIN; none, COUT=Tantal 2.2μF
ECO=H, VIN3.6VDC+0.2Vp-p,
IN; none, COUT=Tantal 2.2μF
C
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
22
R1160x
R1160x331x
R1160x331x
ECO=L, VIN4.3VDC+0.2Vp-p,
CIN; none, COUT=Tantal 1.0μF
ECO=H, VIN4.3VDC+0.2Vp-p,
CIN; none, COUT=Tantal 1.0μF
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
R1160x331x
R1160x331x
ECO=L, VIN4.3VDC+0.2Vp-p,
CIN; none, COUT=Tantal 2.2μF
ECO=H, VIN4.3VDC+0.2Vp-p,
IN; none, COUT=Tantal 2.2μF
C
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
10) Input Transient Response
R1160x261x
R1160x261x
ECO=H, IOUT=30mA,
ECO=L, IOUT=10mA,
tr=tf=5μs, COUT=Tantal 1.0μF
tr=tf=5μs, COUT=Tantal 1.0μF
2.68
2.66
2.64
2.62
2.60
2.58
2.56
5
4
3
2
1
0
5.00
4.50
4.00
3.50
3.00
2.50
2.00
5
4
3
2
1
0
Input Voltage
Input Voltage
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80 90 100
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
Time T(μs)
Time T(ms)
23
R1160x
11) Load Transient Response
R1160x261x
ECO=H, VIN=3.6V,
IN=Tantal 1.0μF, COUT=Tantal 1.0μF
R1160x261x
ECO=L, VIN=3.6V,
IN=Tantal 1.0μF, COUT=Tantal 1.0μF
C
C
C
C
3
2.9
2.8
2.7
2.6
2.5
2.4
150
100
50
4.5
4
20
10
0
Load Current
3.5
3
Load Current
0
2.5
2
Output Voltage
Output Voltage
1.5
-2
0
0
0
2
4
6
8
10 12 14 16 18
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Time T(μs)
Time T(ms)
R1160x261x
ECO=H, VIN=3.6V,
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
R1160x261x
ECO=L, VIN=3.6V,
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
C
3
2.9
2.8
2.7
2.6
2.5
2.4
150
100
50
4.5
4
20
10
0
Load Current
3.5
3
Load Current
0
2.5
2
Output Voltage
Output Voltage
1.5
2
4
6
8
10 12 14 16 18
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Time T(μs)
Time T(ms)
R1160x261x
ECO=H, VIN=3.6V,
IN=Tantal 1.0μF, COUT=Tantal 4.7μF
R1160x261x
ECO=L, VIN=3.6V,
IN=Tantal 1.0μF, COUT=Tantal 4.7μF
C
3
2.9
2.8
2.7
2.6
2.5
2.4
150
100
50
4.5
4
20
10
0
Load Current
3.5
3
Load Current
0
2.5
2
Output Voltage
Output Voltage
1.5
2
4
6
8
10 12 14 16 18
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Time T(μs)
Time T(ms)
24
R1160x
12) Turn on speed with CE pin
R1160x081B
R1160x081B
ECO=L, VIN=1.8V,
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
ECO=H, VIN=1.8V,
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
C
C
2.4
1.8
1.2
0.6
0.0
2.5
2.0
1.5
1.0
0.5
0.0
2.4
1.8
1.2
0.6
0.0
2.5
2.0
1.5
1.0
0.5
0.0
V
CE=0V→1.8V
VCE=0V→1.8V
I
OUT=200mA
IOUT=200mA
0
10 20 30 40 50 60 70
0 100 200 300 400 500 600 700
Time T(μs)
Time T(μs)
R1160x151B
R1160x151B
ECO=H, VIN=2.5V,
ECO=L, VIN=2.5V,
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
3.2
2.4
1.6
0.8
0.0
2.5
2.0
1.5
1.0
0.5
0.0
3.2
2.4
1.6
0.8
0.0
2.5
2.0
1.5
1.0
0.5
0.0
V
CE=0V→2.5V
VCE=0V→2.5V
I
OUT=200mA
IOUT=200mA
0
10 20 30 40 50 60 70
0 100 200 300 400 500 600 700
Time T(μs)
Time T(μs)
R1160x261B
R1160x261B
ECO=H, VIN=3.6V,
ECO=L, VIN=3.6V,
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
4.0
3.0
2.0
1.0
0.0
5.0
4.0
3.0
2.0
1.0
0.0
4.0
3.0
2.0
1.0
0.0
5.0
4.0
3.0
2.0
1.0
0.0
V
CE=0V→3.6V
VCE=0V→3.6V
I
OUT=200mA
IOUT=200mA
0
10 20 30 40 50 60 70
0 100 200 300 400 500 600 700
Time T(μs)
Time T(μs)
25
R1160x
R1160x331B
ECO=H, VIN=4.3V,
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
R1160x331B
ECO=L, VIN=4.3V,
CIN=Tantal 1.0μF, COUT=Tantal 2.2μF
C
5.0
4.0
3.0
2.0
1.0
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
5.0
4.0
3.0
2.0
1.0
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
V
CE=0V→4.3V
VCE=0V→4.3V
I
OUT=200mA
IOUT=200mA
0
10 20 30 40 50 60 70
0 100 200 300 400 500 600 700
Time T(μs)
Time T(μs)
13) Output Voltage at Mode alternative point
R1160x101x
R1160x101x
V
IN=1.3V,
VIN=2.0V,
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
1.05
1.04
1.03
1.02
1.01
1.00
0.99
3.0
2.0
1.0
0.0
1.05
1.04
1.03
1.02
1.01
1.00
0.99
3.0
2.0
1.0
0.0
V
ECO-0V←→1.3V
V
ECO-0V←→2.0V
I
OUT=0mA
OUT=1mA
OUT=10mA
I
I
I
OUT=0mA
OUT=1mA
OUT=10mA
I
I
1.01
1.00
0.99
-
1.01
1.00
0.99
1.01
1.00
0.99
-
1.01
1.00
0.99
-
1.00
0.99
0.98
-
1.00
0.99
0.98
-
1.01
1.00
0.99
0.98
-
I
I
I
OUT=50mA
OUT=100mA
OUT=200mA
I
I
I
OUT=50mA
OUT=100mA
OUT=200mA
1.00
0.99
0.98
-
1.00
0.99
0.98
-
1.01
1.00
0.99
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Time T(ms)
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Time T(ms)
26
R1160x
R1160x261x
R1160x261x
V
IN=3.6V,
V
IN=2.9V,
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
C
IN=Tantal 1.0μF, COUT=Tantal 2.2μF
2.67
2.66
2.65
2.64
2.63
2.62
2.61
2.60
4.0
3.0
2.0
1.0
0.0
2.67
2.66
2.65
2.64
2.63
2.62
2.61
2.60
4.0
3.0
2.0
1.0
0.0
V
ECO-0V←→3.6V
V
ECO-0V←→2.9V
I
I
I
I
OUT=0mA
I
OUT=0mA
OUT=1mA
OUT=10mA
OUT=50mA
I
I
OUT=1mA
2.62
2.61
2.60
-
2.62
2.61
2.60
-
OUT=10mA
2.61
2.61
2.60
2.60
2.59
2.59
-
-
I
I
OUT=50mA
2.61
2.60
2.59
-
2.61
2.60
2.59
-
I
I
OUT=100mA
OUT=200mA
OUT=100mA
2.61
2.60
2.59
-
2.61
2.60
2.59
-
I
OUT=200mA
2.60
2.59
2.58
2.60
2.59
2.58
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Time T(ms)
Time T(ms)
27
R1160x
TECHNICAL NOTES
VDD
VOUT
R1160x
Series
C1
C2
CE
ECO GND
(External Components)
C1: Ceramic Capacitor 1μF
C2: Tantalum Capacitor 2.2μF
When using these ICs, consider the following points:
1. PCB Layout
Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.
Connect a capacitor C1 with a capacitance value as much as 1.0μF or more between VDD and GND pin, and as
close as possible to the pins.
Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring
as short as possible.
2. Phase Compensation
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, use a capacitor C2 with 2.2μF or more and good ESR (Equivalent Series Resistance).
(Note: If additional ceramic capacitors are connected with parallel to the output pin with an output capacitor for
phase compensation, the operation might be unstable. Because of this, test these ICs with as same external
components as ones to be used on the PCB.)
If you use a tantalum type capacitor and ESR value of the capacitor is large, output might be unstable.
Evaluate your circuit with considering frequency characteristics.
If you use a ceramic type output capacitor, please connect about 1Ω resistor in series for the stability of output
voltage.
Depending on the capacitor size, manufacturer, and part number, the bias characteristics and temperature
characteristics are different. Evaluate the circuit with actual using capacitors.
28
R1160x
ESR vs. Output Current
When using these ICs, consider the following points:
The relations between IOUT (Output Current) and ESR of an output capacitor are shown below.
The conditions when the white noise level is under 40μV (Avg.) are marked as the hatched area in the graph.
Measurement conditions
Frequency Band : 10Hz to 2MHz
Temperature
: 25°C
R1160x261x
R1160x261x
ECO=H, VIN=3.6V,
ECO=L, VIN=3.6V,
CIN=Ceramic 1.0μF, COUT=Ceramic 1.0μF
CIN=Ceramic 1.0μF, COUT=Ceramic 1.0μF
100
100
10
10
1
1
0.1
0.1
0.01
0.01
0
20 40 60 80 100 120 140 160 180 200
Output Current IOUT(mA)
0
20 40 60 80 100 120 140 160 180 200
Output Current IOUT(mA)
R1160x261x
R1160x261x
ECO=H, VIN=3.6V,
ECO=L, VIN=3.6V,
CIN=Ceramic 1.0μF, COUT=Ceramic 2.2μF
CIN=Ceramic 1.0μF, COUT=Ceramic 2.2μF
100
100
10
10
1
1
0.1
0.1
0.01
0.01
0
20 40 60 80 100 120 140 160 180 200
Output Current IOUT(mA)
0
20 40 60 80 100 120 140 160 180 200
Output Current IOUT(mA)
29
R1160x
R1160x081x
R1160x081x
ECO=H, VIN=1.8V,
ECO=L, VIN=1.8V,
CIN=Ceramic 1.0μF, COUT=Ceramic 2.2μF
CIN=Ceramic 1.0μF, COUT=Ceramic 2.2μF
100
100
10
10
1
1
0.1
0.01
0.1
0.01
0
20 40 60 80 100 120 140 160 180 200
Output Current IOUT(mA)
0
20 40 60 80 100 120 140 160 180 200
Output Current IOUT(mA)
30
1.The products and the product specifications described in this document are subject to change or
discontinuation of production without notice for reasons such as improvement. Therefore, before
deciding to use the products, please refer to Ricoh sales representatives for the latest
information thereon.
2.The materials in this document may not be copied or otherwise reproduced in whole or in part
without prior written consent of Ricoh.
3.Please be sure to take any necessary formalities under relevant laws or regulations before
exporting or otherwise taking out of your country the products or the technical information
described herein.
4.The technical information described in this document shows typical characteristics of and
example application circuits for the products. The release of such information is not to be
construed as a warranty of or a grant of license under Ricoh's or any third party's intellectual
property rights or any other rights.
5.The products listed in this document are intended and designed for use as general electronic
components in standard applications (office equipment, telecommunication equipment,
measuring instruments, consumer electronic products, amusement equipment etc.). Those
customers intending to use a product in an application requiring extreme quality and reliability,
for example, in a highly specific application where the failure or misoperation of the product
could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system,
traffic control system, automotive and transportation equipment, combustion equipment, safety
devices, life support system etc.) should first contact us.
6.We are making our continuous effort to improve the quality and reliability of our products, but
semiconductor products are likely to fail with certain probability. In order to prevent any injury to
persons or damages to property resulting from such failure, customers should be careful enough
to incorporate safety measures in their design, such as redundancy feature, firecontainment
feature and fail-safe feature. We do not assume any liability or responsibility for any loss or
damage arising from misuse or inappropriate use of the products.
7.Anti-radiation design is not implemented in the products described in this document.
8.Please contact Ricoh sales representatives should you have any questions or comments
concerning the products or the technical information.
For the conservation of the global environment, Ricoh is advancing the decrease of the negative environmental impact material.
After Apr. 1, 2006, we will ship out the lead free products only. Thus, all products that will be shipped from now on comply with RoHS Directive.
Basically after Apr. 1, 2012, we will ship out the Power Management ICs of the Halogen Free products only. (Ricoh Halogen Free products are
also Antimony Free.)
Halogen Free
RICOH COMPANY, LTD.
Electronic Devices Company
http://www.ricoh.com/LSI/
RICOH COMPANY, LTD.
Electronic Devices Company
● Higashi-Shinagawa Office (International Sales)
3-32-3, Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-8655, Japan
Phone: +81-3-5479-2857 Fax: +81-3-5479-0502
RICOH EUROPE (NETHERLANDS) B.V.
● Semiconductor Support Centre
“Nieuw Kronenburg”Prof. W.H. Keesomlaan 1, 1183 DJ, Amstelveen, The Netherlands
P.O.Box 114, 1180 AC Amstelveen
Phone: +31-20-5474-309 Fax: +31-20-5474-791
RICOH ELECTRONIC DEVICES KOREA Co., Ltd.
11 floor, Haesung 1 building, 942, Daechidong, Gangnamgu, Seoul, Korea
Phone: +82-2-2135-5700 Fax: +82-2-2135-5705
RICOH ELECTRONIC DEVICES SHANGHAI Co., Ltd.
Room403, No.2 Building, 690#Bi Bo Road, Pu Dong New district, Shanghai 201203,
People's Republic of China
Phone: +86-21-5027-3200 Fax: +86-21-5027-3299
RICOH COMPANY, LTD.
Electronic Devices Company
● Taipei office
Room109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)
Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623
相关型号:
R1160N251A-TR
Fixed Positive LDO Regulator, 2.5V, 0.3V Dropout, CMOS, PDSO5, SC-74A, MINI, SOT-23, 5 PIN
RICOH
R1160N251A-TR-F
Fixed Positive LDO Regulator, 2.5V, 0.25V Dropout, CMOS, PDSO5, LEAD FREE, SC-74A, SOT-23, 5 PIN
RICOH
R1160N251A-TR-FA
Fixed Positive LDO Regulator, 2.5V, 0.3V Dropout, CMOS, PDSO5, SC-74A, MINI, SOT-23, 5 PIN
RICOH
R1160N251A-TR-FB
Fixed Positive LDO Regulator, 2.5V, 0.3V Dropout, CMOS, PDSO5, SC-74A, MINI, SOT-23, 5 PIN
RICOH
R1160N251A-TR-FE
Fixed Positive LDO Regulator, 2.5V, 0.3V Dropout, CMOS, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN
RICOH
R1160N251B-TR
Fixed Positive LDO Regulator, 2.5V, 0.3V Dropout, CMOS, PDSO5, SC-74A, MINI, SOT-23, 5 PIN
RICOH
R1160N251B-TR-F
Fixed Positive LDO Regulator, 2.5V, 0.2V Dropout, CMOS, PDSO5, LEAD FREE, SC-74A, SOT-23, 5 PIN
RICOH
R1160N251B-TR-FA
Fixed Positive LDO Regulator, 2.5V, 0.3V Dropout, CMOS, PDSO5, SC-74A, MINI, SOT-23, 5 PIN
RICOH
©2020 ICPDF网 联系我们和版权申明