R3131N33EA-TR-FB [RICOH]
Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO3, SOT-23, 3 PIN;型号: | R3131N33EA-TR-FB |
厂家: | RICOH ELECTRONICS DEVICES DIVISION |
描述: | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO3, SOT-23, 3 PIN ISM频段 光电二极管 |
文件: | 总29页 (文件大小:335K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Voltage Detector with Built-in
Delay Circuit
NO. EA-073-0311
R3130N/R3131N SERIES
OUTLINE
R3130N/R3131N Series are CMOS-based low voltage detector ICs with built-in delay circuit, high Detector
Threshold accuracy and ultra low supply current which can be operated at low voltage.
These ICs can be used as system reset generator, and each of these ICs consists of a voltage reference, a
comparator, resistors for setting voltage detector threshold, an output driver transistor, and an output delay
generator.
Detector threshold is fixed internally with high accuracy and requires no adjustment. When Supply Voltage
crosses a setting detector threshold voltage from a high value to a lower value, this IC generates reset signal.
R3130N Series output “L” at detection mode, while R3131N Series output “H”.
Further, each of R3130N/R3131N Series embeds an output delay generator, when Supply Voltage crosses a
setting detector threshold voltage from a low value to a higher value, during a setting delay time which is fixed in
the IC, this IC keeps the reset condition.
Output Delay Time can be selected. (Typ. 240ms is standard.)
Two output types, Nch open drain type and CMOS type, are available.
Since the package for these ICs is SOT23-3 (Mini-mold) package, high density mounting of the ICs on board
is possible.
FEATURES
• Pin to Pin compatible with MAX 809/810 (R3130Nxxxx: MAX 809, R3131Nxxxx: MAX 810)
• Ultra-low supply Current ...................................................Typ. 1.25µA (R313xN27xx: VDD=3.0V)
• Operating Voltage Range ..................................................1.0V to 6.0V (Topt=25°C)
• Detector Threshold .............................................................Setting with a step of 0.1V in the range of 1.6V to
4.8V is possible.
• Embedded Power on Reset Delay Time Circuit ................Delay Time can be designated.
Refer to Selection Guide.
• High Accuracy Detector Threshold .....................................±1.5%
• High Accuracy Output Delay Time......................................±10.0%
• Low Temperature-Drift Coefficient of Detector Threshold ..Typ. ±100ppm/°C
• Two Output Types...............................................................Nch Open Drain and CMOS
• Small Package....................................................................SOT-23-3
APPLICATIONS
• CPU & Logic Circuit Reset
• Battery Checker
• Window Comparator
• Wave Shaping Circuit
• Battery Back-Up Circuit
• Power Failure Detector
1
R3130N/R3131N
BLOCK DIAGRAMS
R3130NxxxA
R3130NxxxC
CMOS Output
Nch Open Drain Output
V
DD
VDD
-
-
Delay
Circuit
Delay
Circuit
OUT
OUT
+
+
Vref
Vref
GND
GND
R3131NxxxA
Nch Open Drain Output
R3131NxxxC
CMOS Output
VDD
VDD
-
-
Delay
Circuit
Delay
Circuit
OUT
OUT
+
+
Vref
Vref
GND
GND
2
R3130N/R3131N
TIMING CHART
Detector
Detector
Threshold
Threshold
V
DET
V
DET
Supply
Voltage
Supply
Voltage
(VDD)
Minimum Operating
Voltage
Minimum Operating
Voltage
(VDD
)
VSS
V
SS
Output Voltage
Output Voltage
VSS
V
SS
Tdelay
Tdelay
R3130N Operation Diagram
R3131N Operation Diagram
• Output Delay Operation
Output Delay Time, or Tdelay is specified as follows:
1. In the case of Nch open drain output:
The time interval from rising edge of VDD pulse (1.0V→(VDET)+1.0V) to the time at which the output reaches
2.5V under the condition that the output pin (OUT) is pulled up to 5V through a 470kΩ resistor.
2. In the case of CMOS output
The time interval from rising edge of VDD pulse (1.0V→(VDET)+1.0V) to the time at which the output reaches
VDD/2.
VDET+1.0V
VDET+1.0V
Input Voltage
(VDD
Input Voltage
(VDD)
)
1.0V
GND
1.0V
GND
V
DET+1.0V
5.0V
2.5V
GND
Output Voltage
(VDET+1.0V)/2
Output Voltage
GND
Trst
Tdelay
Trst
Tdelay
Nch Open Drain Output
CMOS Output
3
R3130N/R3131N
SELECTION GUIDE
The detector threshold , the output type, and Output delay time of R3130N/R3131N series can be designated
at the user’s request by specifying the part number as follows:
R3130Nxxxx(x)-TR ←Part Number
R3131Nxxxx(x)-TR ←Part Number
↑ ↑↑ ↑
↑
a b c d
e
Code
Contents
Setting Detector Threshold (VDET)
Stepwise setting with a step of 0.1V in the range of 1.6V to 4.8V is possible.
The following 4 kinds of voltage are also standard.
2.63V, 2.93V, 3.08V, 4.65V
a
Selection of Output Delay Time
E: 240ms (Standard) A: 50ms B: 100ms D: 200ms H: 400ms
∗A, B, D, H versions can be produced only for 6 kinds of standard voltage items.
b
c
Designation Output type
A: Nch Open Drain
C: CMOS
d
e
Description of last one digit of 4 kinds of standard voltage items.
Designation of Taping Direction (Refer to Taping Specification)
PIN CONFIGURATION
ꢀSOT-23-3
3
MARK SIDE
1
2
PIN DESCRIPTION
Pin No
Symbol
Description
1
GND
Ground Pin
Output Pin
2
3
OUT
R3130N: Output “L” at detection mode, Output “H” at release mode
R3131N: Output “H” at detection mode, Output “L” at release mode
Input Pin
VDD
4
R3130N/R3131N
ABSOLUTE MAXIMUM RATINGS
Symbol
Item
Rating
6.5
Unit
V
VDD
Supply Voltage
Output Voltage
CMOS
Nch
V
V
VSS−0.3 to VDD+0.3
VSS−0.3 to 6.5
20
VOUT
IOUT
PD
Output Current
mA
mW
°C
Power Dissipation
150
Topt
Tstg
Operating Temperature Range
Storage Temperature Range
Soldering Temperature
−40 to +85
−55 to +125
260°C, 10s
°C
Tsolder
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are threshold limit values that must not be exceeded even for a moment under
any conditions.
Moreover, such values for any items must not be reached simultaneously. Operation above these absolute
maximum ratings may cause degradation or permanent damage to the device. These are just stress ratings
and do not necessarily imply to guarantee operation below these limits.
ELECTRICAL CHARACTERISTICS
• R3130N26xx3-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
1
∗
Minimum Operating Voltage
Detector Threshold
Supply Current1
0.75
2.630
1.40
1.25
1.10
1.00
2.669
5.00
4.00
3.50
V
V
VDDL
VDET
ISS1
IOL=50µA
2.591
VDD=6.00V
µA
µA
µA
V
ISS2
Supply Current2
VDD=2.73V
ISS3
Supply Current3
VDD=2.53V
VOH
VOL
“H” Output Voltage
“L” Output Voltage
VDD=2.73V, IOUT=−500µA
VDD=2.53V, IOUT=1.2Ma
0.8×VDD 0.93×VDD
0.16
0.30
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
∆VDET/ Detector Threshold
Temperature Coefficient
Tdelay
−40°C Topt 85°C
±100
ppm/°C
=
=
∆Topt
5
R3130N/R3131N
• R3130N29xx3-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
1
∗
Minimum Operating Voltage
Detector Threshold
Supply Current1
0.75
2.930
1.40
1.25
1.10
1.00
2.973
5.00
4.00
3.50
V
V
VDDL
IOL=50µA
VDET
ISS1
2.887
VDD=6.00V
µA
µA
µA
V
ISS2
Supply Current2
VDD=3.03V
ISS3
Supply Current3
VDD=2.83V
VOH
“H” Output Voltage
“L” Output Voltage
VDD=3.03V, IOUT=−500µA
VDD=2.83V, IOUT=1.2mA
0.8×VDD 0.93×VDD
VOL
0.16
0.30
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
• R3130N30xx8-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
6.0
Unit
V
V
VDDH
Maximum Operating Voltage
Minimum Operating Voltage
Detector Threshold
Supply Current1
1
∗
0.75
3.080
1.40
1.25
1.10
1.00
3.126
5.00
4.00
3.50
VDDL
IOL=50µA
VDET
ISS1
3.034
V
VDD=6.00V
µA
µA
µA
V
ISS2
Supply Current2
VDD=3.18V
ISS3
Supply Current3
VDD=2.98V
VOH
“H” Output Voltage
“L” Output Voltage
VDD=3.18V, IOUT=−500µA
VDD=2.98V, IOUT=1.2mA
0.8×VDD 0.93×VDD
VOL
0.16
0.30
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
ppm/°C
−40°C Topt 85°C
±100
=
=
Temperature Coefficient
∆Topt
6
R3130N/R3131N
• R3130N40xx-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
1
∗
Minimum Operating Voltage
Detector Threshold
Supply Current1
0.75
4.000
1.40
1.30
1.15
1.00
4.060
5.00
4.00
3.50
V
V
VDDL
IOL=50µA
VDET
ISS1
3.940
VDD=6.00V
µA
µA
µA
V
ISS2
Supply Current2
VDD=4.10V
ISS3
Supply Current3
VDD=3.90V
VOH
“H” Output Voltage
“L” Output Voltage
VDD=4.10V, IOUT=−800µA
VDD=3.90V, IOUT=3.2mA
0.8×VDD 0.95×VDD
VOL
0.18
0.40
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
• R3130N44xx-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
6.0
Unit
V
V
VDDH
Maximum Operating Voltage
Minimum Operating Voltage
Detector Threshold
Supply Current1
1
∗
0.75
4.400
1.40
1.30
1.15
1.00
4.466
5.00
4.00
3.50
VDDL
IOL=50µA
VDET
ISS1
4.334
V
VDD=6.00V
µA
µA
µA
V
ISS2
Supply Current2
VDD=4.50V
ISS3
Supply Current3
VDD=4.30V
VOH
“H” Output Voltage
“L” Output Voltage
VDD=4.50V, IOUT=−800µA
VDD=4.30V, IOUT=3.2mA
0.8×VDD 0.95×VDD
VOL
0.18
0.40
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
7
R3130N/R3131N
• R3130N46xx5-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
6.0
Unit
V
V
VDDH
Maximum Operating Voltage
Minimum Operating Voltage
Detector Threshold
Supply Current1
1
∗
0.75
4.650
1.40
1.30
1.15
1.00
4.719
5.00
4.00
3.50
VDDL
IOL=50µA
VDET
ISS1
4.581
V
VDD=6.00V
µA
µA
µA
V
ISS2
Supply Current2
VDD=4.75V
ISS3
Supply Current3
VDD=4.55V
VOH
“H” Output Voltage
“L” Output Voltage
VDD=4.75V, IOUT=−800µA
VDD=4.55V, IOUT=3.2mA
0.8×VDD 0.95×VDD
VOL
0.18
0.40
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
• R3131N26xx3-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
CMOS
Output
IOH=−10µA
VDS=6.5V
3
∗
Minimum Operating Voltage
0.90
1.00
V
VDDL
Nch Open
Drain Output
VDET
ISS1
Detector Threshold
Supply Current1
Supply Current2
Supply Current3
“H” Output Voltage
“L” Output Voltage
2.591
2.630
1.40
1.25
1.10
2.669
5.00
4.00
3.50
V
µA
µA
µA
V
VDD=6.00V
VDD=2.73V
VDD=2.53V
ISS2
ISS3
VOH
VDD=2.73V, IOUT=−500µA
VDD=2.53V, IOUT=1.2mA
0.8×VDD 0.93×VDD
VOL
0.16
0.30
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
8
R3130N/R3131N
• R3131N29xx3-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
CMOS
Output
IOH=−10µA
VDS=6.5V
3
∗
Minimum Operating Voltage
0.90
1.00
V
VDDL
Nch Open
Drain Output
VDET
ISS1
Detector Threshold
Supply Current1
Supply Current2
Supply Current3
“H” Output Voltage
“L” Output Voltage
2.887
2.930
1.40
1.25
1.10
2.973
5.00
4.00
3.50
V
µA
µA
µA
V
VDD=6.00V
VDD=3.03V
VDD=2.83V
ISS2
ISS3
VOH
VDD=2.83V, IOUT=−500µA
VDD=3.03V, IOUT=1.2mA
0.8×VDD 0.93×VDD
VOL
0.16
0.30
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
• R3131N30xx8-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
CMOS
Output
IOH=−10µA
VDS=6.5V
3
∗
Minimum Operating Voltage
0.90
1.00
V
VDDL
Nch Open
Drain Output
VDET
ISS1
Detector Threshold
Supply Current1
Supply Current2
Supply Current3
“H” Output Voltage
“L” Output Voltage
3.034
3.080
1.40
1.25
1.10
3.126
5.00
4.00
3.50
V
µA
µA
µA
V
VDD=6.00V
VDD=3.18V
VDD=2.98V
ISS2
ISS3
VOH
VDD=2.98V, IOUT=−500µA
VDD=3.18V, IOUT=1.2mA
0.8×VDD 0.93×VDD
VOL
0.16
0.30
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
9
R3130N/R3131N
• R3131N40xx-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
CMOS
Output
IOH=−10µA
VDS=6.5V
3
∗
Minimum Operating Voltage
0.90
1.00
V
VDDL
Nch Open
Drain Output
VDET
ISS1
Detector Threshold
Supply Current1
Supply Current2
Supply Current3
“H” Output Voltag
“L” Output Voltage
3.940
4.000
1.40
1.30
1.15
4.060
5.00
4.00
3.50
V
µA
µA
µA
V
VDD=6.00V
VDD=3.90V
VDD=4.10V
ISS2
ISS3
VOH
VDD=3.90V, IOUT=−800µA
VDD=4.10V, IOUT=3.2mA
0.8×VDD 0.95×VDD
VOL
0.18
0.40
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Tdelay
∆VDET/
Detector Threshold
Temperature Coefficient
−40°C Topt 85°C
±100
ppm/°C
=
=
∆Topt
• R3131N44xx-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
CMOS
Output
IOH=−10µA
VDS=6.5V
3
∗
Minimum Operating Voltage
0.90
1.00
V
VDDL
Nch Open
Drain Output
VDET
ISS1
Detector Threshold
Supply Current1
Supply Current2
Supply Current3
“H” Output Voltage
“L” Output Voltage
4.334
4.400
1.40
1.30
1.15
4.466
5.00
4.00
3.50
V
µA
µA
µA
V
VDD=6.00V
VDD=4.50V
VDD=4.30V
ISS2
ISS3
VOH
VDD=4.30V, IOUT=−800µA
VDD=4.50V, IOUT=3.2mA
0.8×VDD 0.95×VDD
VOL
0.18
0.40
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
10
R3130N/R3131N
• R3131N46xx5-TR
[Topt=25°C]
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VDDH
Maximum Operating Voltage
6.0
V
CMOS
Output
IOH=−10µA
VDS=6.5V
3
∗
Minimum Operating Voltag
0.90
1.00
V
VDDL
Nch Open
Drain Output
VDET
ISS1
Detector Threshold
Supply Current1
Supply Current2
Supply Current3
“H” Output Voltage
“L” Output Voltage
4.581
4.650
1.40
1.30
1.15
4.719
5.00
4.00
3.50
V
µA
µA
µA
V
VDD=6.00V
VDD=4.75V
VDD=4.55V
ISS2
ISS3
VOH
VDD=4.55V, IOUT=−800µA
VDD=4.75V, IOUT=3.2mA
0.8×VDD 0.95×VDD
VOL
0.18
0.40
V
2
∗
Output Delay Time for release Refer to electrical characteristics by Output Delay Time for release
Detector Threshold
Tdelay
∆VDET/
−40°C Topt 85°C
±100
ppm/°C
=
=
Temperature Coefficient
∆Topt
∗1) Supply Voltage when Output Voltage becomes equal or less than 0.3V. (As for Nch Open Drain Output
type, pull-up resistor is 470kΩ, pull-up voltage is 5.0V.
∗2) Time interval of rising edge of VDD which is set from 1.0V to VDET+1.0V, and the point of which Output
voltage reaches to 50% of final voltage.
∗3) CMOS Output type; Supply Voltage when Output Voltage becomes equal or more than 0.8×VDD.
Nch Open Drain type; Supply Voltage when off leakage current becomes equal or less than 0.1µA.
ELECTRICAL CHARACTERISTICS BY OUTPUT DELAY TIME
[Topt=25°C]
Output Delay Time (Tdelay)
Part Number
Test Condition
Unit
Min.
Typ.
Max.
R313xNxxAx
R313xNxxBx
R313xNxxDx
R313xNxxEx
R313xNxxHx
45
50
55
90
100
200
240
400
110
220
264
440
ms
VDD=1.0V to VDET+1.0V
180
216
360
11
R3130N/R3131N
ELECTRICAL CHARACTERISTICS BY DETECTOR THRESHOLD
• R3130N16EA/C to R3130N48EA/C
Detector Threshold
VDET (V)
Supply Current 1
Supply Current 2
Supply Current 3
Part Number
ISS1 (µA)
ISS2 (µA)
ISS3 (µA)
Min.
Typ.
Max. Condition Typ.
Max.
Condition
Typ.
Max.
Condition
Typ.
Max.
R3130N16EA/C
R3130N17EA/C
R3130N18EA/C
R3130N19EA/C
R3130N20EA/C
R3130N21EA/C
R3130N22EA/C
R3130N23EA/C
R3130N24EA/C
R3130N25EA/C
R3130N26EA/C
R3130N27EA/C
R3130N28EA/C
R3130N29EA/C
R3130N30EA/C
R3130N31EA/C
R3130N32EA/C
R3130N33EA/C
R3130N34EA/C
R3130N35EA/C
R3130N36EA/C
R3130N37EA/C
R3130N38EA/C
R3130N39EA/C
R3130N40EA/C
R3130N41EA/C
R3130N42EA/C
R3130N43EA/C
R3130N44EA/C
R3130N45EA/C
R3130N46EA/C
R3130N47EA/C
R3130N48EA/C
1.576 1.600 1.624
1.675 1.700 1.725
1.773 1.800 1.827
1.872 1.900 1.928
1.970 2.000 2.030
2.069 2.100 2.131
2.167 2.200 2.233
2.266 2.300 2.334
2.364 2.400 2.436
2.463 2.500 2.537
2.561 2.600 2.639
2.660 2.700 2.740
2.758 2.800 2.842
2.857 2.900 2.943
2.955 3.000 3.045
3.054 3.100 3.146
3.152 3.200 3.248
3.251 3.300 3.349
3.349 3.400 3.451
3.448 3.500 3.552
3.546 3.600 3.654
3.645 3.700 3.755
3.743 3.800 3.857
3.842 3.900 3.958
3.940 4.000 4.060
4.039 4.100 4.161
4.137 4.200 4.263
4.236 4.300 4.364
4.334 4.400 4.466
4.433 4.500 4.567
4.531 4.600 4.669
4.630 4.700 4.770
4.728 4.800 4.872
1.20
1.00
1.25
1.10
VDD=VDET
+0.1V
VDD=VDET
−0.1V
3.50
VDD=6.0V
1.40
5.00
4.00
1.30
1.15
12
R3130N/R3131N
Topt=25°C
Minimum
Operating
Voltage
Detector Threshold
“H” Output Voltage
VOH (V)
“L” Output Voltage
VOL (V)
Output Delay Time
Tdelay (ms)
Temperature Coefficient
∆VDET/∆Topt
(ppm/°C)
VDDL (V)
Condition
Min.
Typ.
Condition
Typ.
Max.
Typ.
Max.
Min.
Typ.
Max.
Condition
Typ.
VDD=VDET
+0.1V
0.80×
VDD
0.95×
VDD
IOH=
−150µA
VDD=VDET
−0.1V,
IOL=1.2mA
0.16
0.30
VDD=VDET
+0.1V
0.80×
VDD
0.93×
VDD
IOH=
−500µA
−40°C
∗1
0.75
∗1
1.00
<
<
216
240
264
Topt
±100
=
=
85°C
VDD=VDET
+0.1V
VDD=VDET
−0.1V,
IOL=3.2mA
0.80×
VDD
0.95×
VDD
0.18
0.40
IOH=
−800µA
∗1describes VDD Voltage when Output Voltage becomes equal or less than 0.3V.
13
R3130N/R3131N
• R3131N16EA/C to R3131N48EA/C
Detector Threshold
Supply Current 1
Supply Current 2
Supply Current 3
Part Number
VDET (V)
ISS1 (µA)
ISS2 (µA)
ISS3 (µA)
Min.
Typ.
Max. Condition Typ.
Max.
Condition
Typ.
Max.
Condition
Typ.
Max.
R3131N16EA/C
R3131N17EA/C
R3131N18EA/C
R3131N19EA/C
R3131N20EA/C
R3131N21EA/C
R3131N22EA/C
R3131N23EA/C
R3131N24EA/C
R3131N25EA/C
R3131N26EA/C
R3131N27EA/C
R3131N28EA/C
R3131N29EA/C
R3131N30EA/C
R3131N31EA/C
R3131N32EA/C
R3131N33EA/C
R3131N34EA/C
R3131N35EA/C
R3131N36EA/C
R3131N37EA/C
R3131N38EA/C
R3131N39EA/C
R3131N40EA/C
R3131N41EA/C
R3131N42EA/C
R3131N43EA/C
R3131N44EA/C
R3131N45EA/C
R3131N46EA/C
R3131N47EA/C
R3131N48EA/C
1.576 1.600 1.624
1.675 1.700 1.725
1.773 1.800 1.827
1.872 1.900 1.928
1.970 2.000 2.030
2.069 2.100 2.131
2.167 2.200 2.233
2.266 2.300 2.334
2.364 2.400 2.436
2.463 2.500 2.537
2.561 2.600 2.639
2.660 2.700 2.740
2.758 2.800 2.842
2.857 2.900 2.943
2.955 3.000 3.045
3.054 3.100 3.146
3.152 3.200 3.248
3.251 3.300 3.349
3.349 3.400 3.451
3.448 3.500 3.552
3.546 3.600 3.654
3.645 3.700 3.755
3.743 3.800 3.857
3.842 3.900 3.958
3.940 4.000 4.060
4.039 4.100 4.161
4.137 4.200 4.263
4.236 4.300 4.364
4.334 4.400 4.466
4.433 4.500 4.567
4.531 4.600 4.669
4.630 4.700 4.770
4.728 4.800 4.872
1.20
1.00
1.25
1.10
VDD=VDET
+0.1V
VDD=VDET
−0.1V
VDD=6.0V
1.40
5.00
4.00
3.50
1.30
1.15
14
R3130N/R3131N
Topt=25°C
Minimum
Operating
Voltage
Detector Threshold
“H” Output Voltage
VOH (V)
“L” Output Voltage
VOL (V)
Output Delay Time
Tdelay (ms)
Temperature Coefficient
∆VDET/∆Topt
(ppm/°C)
VDDL (V)
Condition
Min.
Typ.
Condition
Typ.
Max.
Typ.
Max.
Min.
Typ.
Max.
Condition
Typ
VDD=VDET
−0.1V
0.80×
VDD
0.95×
VDD
IOH=
−150µA
VDD=VDET
+0.1V,
IOL=1.2mA
0.16
0.30
VDD=VDET
−0.1V
0.80×
VDD
0.93×
VDD
IOH=
−500µA
−40°C
∗2
0.90
∗2
1.00
<
<
216
240
264
Topt
±100
=
=
85°C
VDD=VDET
−0.1V
VDD=VDET
+0.1V,
IOL=3.2mA
0.80×
VDD
0.95×
VDD
0.18
0.40
IOH=
−800µA
∗2 CMOS Output Type; describes VDD voltage when Output Voltage becomes equal or more than VDD×0.8V
Nch Open Drain Output Type; describes VDD voltage when Off-leakage Current becomes equal or less than 0.1µA.
15
R3130N/R3131N
OPERATION
• Operation of R3130N Series
⋅ CMOS output type
VDD
OUT pin is connected to the drain of
Nch Tr. and Pch Tr. in this IC.
⋅ Nch open drain output type
OUT pin is connected to the drain of
Nch Tr. in this IC. (OUT pin should be
pulled up to VDD or an external voltage
level.)
Ra
Pch
Nch
+
Delay
Circuit
OUT
GND
-
Comparator
Vref
Rb
Block Diagram
1
2
3
4
5
B
Detector Threshold(VDET)
=Released Voltage
Supply
Voltage
(VDD
A
)
Minimum Operating
Voltage(VDDL
)
GND
Output
Voltage
(OUT)
Tdelay
GND
Operating Diagram
In the above diagram,
1 Output voltage becomes equal to supply voltage (Nch open drain output Type; equal to pull-up Voltage).
>
2When supply voltage is down to the detector threshold level (Point A), Vref VDD× Rb/(Ra+Rb) is true. Then,
=
Output of the comparator is reversed, thus output voltage becomes equal to GND level.
3 When supply voltage is lower than minimum operating voltage, output of transistor is indefinite, therefore
output is also indefinite.
4 Output voltage is equal to GND level.
5 When supply voltage is higher than released voltage (Point B), Vref VDD× Rb/(Ra+Rb) is true. Then output
=
of the comparator is reversed, thus output voltage becomes equal to supply voltage (Nch open drain output
type; equal to pull-up voltage).
∗ There is no hysteresis range between detector threshold and released voltage.
16
R3130N/R3131N
• Operation of R3131N Series
⋅ CMOS output type
VDD
OUT pin is connected to the drain of
Nch Tr. and Pch Tr. in this IC.
⋅ Nch open drain output type: I
OUT pin is connected to the drain of
Nch Tr. in this IC. (OUT pin should be
pulled up to VDD or an external voltage
level.)
Ra
Pch
Nch
+
Delay
Circuit
OUT
GND
-
Comparator
Vref
Rb
Block Diagram
1
2
3
4
5
B
Detector Threshold(VDET)
=Released Voltage
Supply
Voltage
(VDD
A
)
Minimum Operating
Voltage(VDDL
)
GND
Output
Voltage
(OUT)
Tdelay
GND
Operation Diagram
In the above diagram,
1 Output voltage becomes equal to GND level.
>
2When supply voltage is down to the detector threshold level (Point A), Vref VDD× Rb/(Ra+Rb) is true. Then,
=
output of the comparator is reversed, thus output voltage becomes equal to supply voltage (Nch open drain
output type; equal to pull-up Voltage).
3 When supply voltage is lower than minimum operating voltage, Output of transistor is indefinite, therefore
output is also indefinite.(Nch open drain output type; Output voltage level is equal to pull-up voltage.)
4 Output voltage is equal to supply voltage. (Nch open drain output type; equal to pull-up voltage.)
5 When supply voltage is higher than released voltage (Point B), Vref VDD× Rb/(Ra+Rb) is true. Then output
=
of the comparator is reversed, thus output voltage becomes equal to GND level after the output delay time.
∗ There is no hysteresis range between detector threshold and released voltage.
17
R3130N/R3131N
TEST CIRCUITS
I
SS
5V
470kΩ
VDD
V
DD
R313xN
Series
R313xN
Series
V
OUT
V
IN
VIN
OUT
OUT
GND
GND
Test Circuit for Supply Current
Test Circuit for Detector Threshold
(CMOS Output type; pull-up part is not necessary.)
VDD
V
DD
OUT
OUT
R313xN
Series
R313xN
Series
VIN
V
IN
V
OH
V
OL
V
V
GND
GND
I
OUT
I
OUT
Test Circuit for “H” Output Voltage
(CMOS Output Type only)
Test Circuit for “L” Output Voltage
(VDET)+1.0V
Input
Voltage
V
DD
1.0V
GND
V
DD
VOUT
R313xN
Series
V
IN
Ioz
OUT
100%
50%
R3130N Series
R313xN
Series
Output
Voltage
VIN
OUT
GND
VDS
R3131N Series
Tdelay
GND
GND
Test Circuit for Off Leakage Current
Test Circuit for Output Delay Time
(CMOS Output type; pull-up is not necessary.)
18
R3130N/R3131N
TYPICAL CHARACTERISTICS
1) Supply Current vs. Input Voltage
R3131N26xx3
R3131N29xx3
2.0
2.0
1.6
1.2
0.8
0.4
0.0
Topt=85°C
Topt=85°C
-40°C
1.6
1.2
0.8
0.4
0.0
25°C
25°C
-40°C
0
0
0
1
1
1
2
3
4
5
6
6
6
0
0
0
1
1
1
2
3
4
5
6
6
6
Input Voltage VIN[V]
Input Voltage VIN[V]
R3131N40xx
25°C
R3131N30xx8
2.0
1.6
1.2
0.8
0.4
0.0
2.0
1.6
1.2
0.8
0.4
0.0
Topt=85°C
Topt=85°C
25°C
-40°C
-40°C
2
3
4
5
2
3
4
5
Input Voltage VIN[V]
Input Voltage VIN[V]
R3131N44xx
R3131N46xx5
2.0
1.6
1.2
0.8
0.4
0.0
2.0
1.6
1.2
0.8
0.4
0.0
Topt=85°C
-40°C
Topt=85°C
25°C
25°C
-40°C
2
3
4
5
2
3
4
5
Input Voltage VIN[V]
Input Voltage VIN[V]
19
R3130N/R3131N
2) Detector Threshold vs. Temperature
R3130N26xx3
R3130N29xx3
2.67
2.99
2.97
2.95
2.93
2.91
2.65
2.63
2.61
2.59
2.57
2.89
2.87
-50
-25
0
25
50
75
75
75
100
100
100
-50
-25
0
25
50
75
75
75
100
100
100
Temperature Topt[°C]
Temperature Topt[°C]
R3130N30xx8
R3130N40xx
4.08
4.06
4.04
4.02
4.00
3.98
3.96
3.94
3.92
3.13
3.11
3.09
3.07
3.05
3.03
3.01
-50
-25
0
25
50
-50
-25
0
25
50
Temperature Topt[°C]
Temperature Topt[°C]
R3130N44xx
R3130N46xx5
4.45
4.43
4.41
4.39
4.37
4.35
4.33
4.31
4.29
4.69
4.67
4.65
4.63
4.61
4.59
4.57
4.55
4.53
-50
-25
0
25
50
-50
-25
0
25
50
Temperature Topt[°C]
Temperature Topt[°C]
20
R3130N/R3131N
3) Nch Driver Output Current vs. VDS
R3130N26xx3
R3130N29xx3
10
10
8
V
DD=2.0V
VDD=2.0V
8
6
4
6
4
2
0
2
1.0V
1.0V
0
0.0
0.5
1.0
1.5
2.0
2.0
3.0
0.0
0.5
1.0
1.5
2.0
3.0
3.0
V
DS[V]
V
DS[V]
R3130N30xx8
R3130N40xx
10
20
15
10
5
VDD=3.0V
V
DD=2.0V
8
6
4
2
0
2.0V
1.0V
1.0V
0.5
0
0.0
1.0
1.5
2.0
2.5
0.0
0.5
1.0
1.5
V
DS[V]
V
DS[V]
R3130N44xx
R3130N46xx5
20
15
10
5
20
15
10
5
3.0V
V
DD=4.0V
3.0V
V
DD=4.0V
2.0V
2.0V
1.0V
0.5
1.0V
0.5
0
0
0.0
1.0
1.5
2.0
2.5
0.0
1.0
1.5
2.0
2.5
VDS[V]
VDS[V]
21
R3130N/R3131N
R3131N26xx3
R3131N29xx3
20
20
15
10
5
4.0V
4.0V
6.0V
6.0V
VDD=3.0V
VDD=3.0V
15
10
5
5.0V
5.0V
0
0
0.0
0.5
1.0
1.5
2.0
2.5
2.5
2.5
3.0
3.0
3.0
0.0
0.5
1.0
1.5
2.0
2.0
2.0
2.5
2.5
2.5
3.0
3.0
3.0
V
DS[V]
V
DS[V]
R3131N30xx8
R3131N40xx
20
15
10
5
20
15
10
5
6.0V
6.0V
VDD=4.0V
VDD=5.0V
5.0V
0
0
0.0
0.5
1.0
1.5
2.0
0.0
0.5
1.0
1.5
V
DS[V]
VDS[V]
R3131N44xx
R3131N46xx5
20
15
10
5
20
15
10
5
6.0V
6.0V
V
DD=5.0V
VDD=5.0V
0
0
0.0
0.5
1.0
1.5
2.0
0.0
0.5
1.0
1.5
VDS[V]
VDS[V]
22
R3130N/R3131N
4) Nch Driver Output Current vs. Input Voltage
R3130N26xx3
R3130N29xx3
V
DS=0.5V
V
DS=0.5V
10
10
Topt=-40°C
Topt=-40°C
9
8
7
6
9
8
7
6
25°C
25°C
5
4
3
2
1
5
4
3
2
1
85°C
85°C
0
0
0
0.5
1
1.5
2
2.5
3
0
0
0
0.5
1
1.5
2
2.5
3
Input Voltage VIN[V]
Input Voltage VIN[V]
R3130N30xx8
R3130N40xx
V
DS=0.5V
V
DS=0.5V
Topt=-40°C
25°C
12
10
12
10
Topt=-40°C
25°C
8
6
8
6
85°C
4
2
0
4
2
0
85°C
0
0.5
1
1.5
2
2.5
3
3.5
1
2
3
4
5
Input Voltage VIN[V]
Input Voltage VIN[V]
R3130N44xx
R3130N46xx5
V
DS=0.5V
V
DS=0.5V
14
12
10
8
14
12
10
8
Topt=-40°C
25°C
Topt=-40°C
25°C
6
6
85°C
85°C
4
2
0
4
2
0
1
2
3
4
5
0
1
2
3
4
5
Input Voltage VIN[V]
Input Voltage VIN[V]
23
R3130N/R3131N
R3131N26xx3
R3131N29xx3
V
DS=0.5V
V
DS=0.5V
Topt=-40°C
25°C
16
14
12
10
8
16
14
12
10
8
Topt=-40°C
25°C
85°C
85°C
6
6
4
4
2
2
0
0
0
1
2
3
4
5
6
0
0
0
1
2
3
4
5
6
Input Voltage VIN[V]
Input Voltage VIN[V]
R3131N30xx8
R3131N40xx
V
DS=0.5V
Topt=-40°C
25°C
V
DS=0.5V
Topt=-40°C
25°C
16
14
12
10
8
16
14
12
10
8
85°C
85°C
6
6
4
4
2
2
0
0
0
1
2
3
4
5
6
1
2
3
4
5
6
Input Voltage VIN[V]
Input Voltage VIN[V]
R3131N44xx
R3131N46xx5
V
DS=0.5V
V
DS=0.5V
16
14
12
10
8
16
14
12
10
8
Topt=-40°C
25°C
Topt=-40°C
25°C
85°C
85°C
6
6
4
4
2
2
0
0
0
1
2
3
4
5
6
1
2
3
4
5
6
Input Voltage VIN[V]
Input Voltage VIN[V]
24
R3130N/R3131N
5) Pch Driver Output Current vs. Input Voltage
R3130N26xx3
R3130N29xx3
12
12
V
DS=-2.1V
V
DS=-2.1V
10
8
10
8
-1.5V
-1.5V
-1.0V
-0.5V
-1.0V
-0.5V
6
6
4
4
2
2
0
0
0
0
0
1
2
3
4
5
6
6
6
0
0
0
1
2
3
4
5
6
6
6
Input Voltage VIN[V]
Input Voltage VIN[V]
R3130N30xx8
R3130N40xx
12
12
V
DS=-2.1V
V
DS=-2.1V
10
8
10
8
-1.5V
-1.5V
6
6
-1.0V
-0.5V
-1.0V
-0.5V
4
4
2
2
0
0
1
2
3
4
5
1
2
3
4
5
Input Voltage VIN[V]
Input Voltage VIN[V]
R3130N44xx
R3130N46xx5
12
12
V
DS=-2.1V
V
DS=-2.1V
10
8
10
8
-1.5V
-1.5V
6
6
-1.0V
-0.5V
-1.0V
-0.5V
4
4
2
2
0
0
1
2
3
4
5
1
2
3
4
5
Input Voltage VIN[V]
Input Voltage VIN[V]
25
R3130N/R3131N
R3131N26xx3
R3131N29xx3
4
3
2
1
0
5
4
V
DS=-2.1V
V
DS=-2.1V
-1.5V
-1.0V
-1.5V
-1.0V
3
2
1
0
-0.5V
3
-0.5V
0
0.5
1
1.5
2
2.5
0
1
2
3
4
Input Voltage VIN[V]
Input Voltage VIN[V]
R3131N30xx8
R3131N40xx
5
4
8
7
6
5
4
3
2
1
0
VDS=-2.1V
V
DS=-2.1V
-1.5V
-1.5V
-1.0V
3
2
1
0
-1.0V
-0.5V
-0.5V
0
1
2
3
4
0
1
2
3
4
5
Input Voltage VIN[V]
Input Voltage VIN[V]
R3131N44xx
R3131N46xx5
10
8
10
8
VDS=-2.1V
VDS=-2.1V
-1.5V
-1.0V
-1.5V
-1.0V
6
6
4
4
-0.5V
5
-0.5V
5
2
2
0
0
0
1
2
3
4
0
1
2
3
4
Input Voltage VIN[V]
Input Voltage VIN[V]
26
R3130N/R3131N
6) Output Delay Time at Detection Mode vs. Temperature
R3131N26xx3
R3131N29xx3
50
50
40
30
20
10
0
40
30
20
10
0
-50
-25
0
25
50
75
75
75
100
100
100
-50
-25
0
25
50
75
75
75
100
100
100
Temperature Topt[°C]
Temperature Topt[°C]
R3131N30xx8
R3131N40xx
50
50
40
30
20
10
0
40
30
20
10
0
-50
-25
0
25
50
-50
-25
0
25
50
Temperature Topt[°C]
Temperature Topt[°C]
R3131N44xx
R3131N46xx5
50
40
30
20
10
0
50
40
30
20
10
0
-50
-25
0
25
50
-50
-25
0
25
50
Temperature Topt[°C]
Temperature Topt[°C]
27
R3130N/R3131N
7) Power-on Reset Delay Time vs. Temperature
R3131NxxAx
R3131NxxBx
75
140
120
65
55
45
35
100
80
60
-50
-25
0
25
50
75
75
75
100
100
100
-50
-25
0
25
50
75
100
Temperature Topt[°C]
Temperature Topt[°C]
R3131NxxDx
R3131NxxEx
250
360
320
225
200
175
150
280
240
200
-50
-25
0
25
50
-50
-25
0
25
50
75
100
Temperature Topt[°C]
Temperature Topt[°C]
R3131NxxHx
500
450
400
350
300
-50
-25
0
25
50
Temperature Topt[°C]
28
R3130N/R3131N
TECHNICAL NOTES
V
V
DD
DD
V
V
DD
DD
R1
R
R2
R313xN
Series
R313xN
Series
OUT
OUT
GND
GND
Figure A
Figure B
As shown wiring in Figure A and Figure B may cause unstable operation by cross conduction current at
detection of all types of R313xN Series. The detector threshold may shift because of voltage drop by
consumption current of this IC itself.
At the power-on state, if VDD starts up from minimum input voltage (1V) or less very rapidly, the internal
initialization may not be finished, and output may be unstable. If the transient time from the minimum input
voltage to the detector threshold level at the power-on state is 30µs or less, fully evaluation is necessary.
29
相关型号:
R3131N34EA-TR
Power Supply Support Circuit, Fixed, 1 Channel, +3.4VV, CMOS, PDSO3, SOT-23, 3 PIN
RICOH
©2020 ICPDF网 联系我们和版权申明