RN5VD12AA-TR-FA
更新时间:2024-09-18 16:40:32
品牌:RICOH
描述:Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO5, PLASTIC, SOT-23, 5 PIN
RN5VD12AA-TR-FA 概述
Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO5, PLASTIC, SOT-23, 5 PIN 电源管理电路
RN5VD12AA-TR-FA 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Obsolete | 零件包装代码: | SOT-23 |
包装说明: | LSSOP, | 针数: | 5 |
Reach Compliance Code: | unknown | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | 风险等级: | 5.65 |
可调阈值: | NO | 模拟集成电路 - 其他类型: | POWER SUPPLY SUPPORT CIRCUIT |
JESD-30 代码: | R-PDSO-G5 | JESD-609代码: | e2 |
长度: | 2.9 mm | 信道数量: | 1 |
功能数量: | 1 | 端子数量: | 5 |
最高工作温度: | 85 °C | 最低工作温度: | -40 °C |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | LSSOP |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH |
峰值回流温度(摄氏度): | NOT SPECIFIED | 认证状态: | Not Qualified |
座面最大高度: | 1.3 mm | 最大供电电流 (Isup): | 0.0045 mA |
最大供电电压 (Vsup): | 10 V | 最小供电电压 (Vsup): | 0.8 V |
标称供电电压 (Vsup): | 1.5 V | 表面贴装: | YES |
技术: | CMOS | 温度等级: | INDUSTRIAL |
端子面层: | TIN SILVER | 端子形式: | GULL WING |
端子节距: | 0.95 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 宽度: | 1.6 mm |
Base Number Matches: | 1 |
RN5VD12AA-TR-FA 数据手册
通过下载RN5VD12AA-TR-FA数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载VOLTAGE DETECTOR
WITH OUTPUT DELAY
RN5VD SERIES
APPLICATION MANUAL
NO.EA-027-0006
VOLTAGE DETECTOR
WITH OUTPUT DELAY
RN5VD SERIES
OUTLINE
The RN5VD Series are voltage detector ICs with output delay functions and high detector threshold
accuracy and ultra-low supply current by CMOS process, which can be operated at an extremely low volt-
age and is used,for instance, for system reset.
Each of these ICs consists of a voltage reference unit, a comparator, resistors for voltage detection, an
output driver, a hysteresis circuit and an output delay generator. The detector threshold is fixed with high
accuracy in the IC and requires no adjustment.
The RN5VD Series are operable by a lower voltage than that for the R×5VL Series, and can be driven
by a single battery.
Two output types, Nch open drain type and CMOS type, are available. Since the package for these ICs
are SOT-23-5(Mini-mold)package, high density mounting of the ICs on board is possible.
FEATURES
......................................................
• Output Delay
TYP. 100ms with external capacitor : 0.15µF
TYP. 1.0µA (RN5VD15× : VDD=3.5V)
0.7V to 10.0V
...................................
.......................
• Ultra-low supply current
• Broad Operating Voltage Range
............................................
• Detector Threshold
Stepwise setting with a step of 0.1V in the range of 0.9V to 6.0V is
................................................................................possible. (refer to Selection Guide) .
.....................
• High accuracy detector threshold
±2.5%
...........
TYP. ±100ppm/˚C
• Low Temperature-Drift Coefficient of Detector Threshold
..............................................
• Two Output Types
Nch Open Drain and CMOS
SOT-23-5(Mini-mold)
....................................................
• Small Package
APPLICATIONS
•
•
•
•
•
•
CPU & Logic Circuit Reset
Battery Checker
Window Comparator
Wave Shaping Circuit
Battery Back-Up Circuit
Power Failure Detector
1
RN5VD
BLOCK DIAGRAMS
• Nch Open Drain Output (RN5VD××A)
VDD
2
OUT
GND
1
3
RD
+
–
Vref
5
CD
• CMOS Output (RN5VD××C)
VDD
2
RD
+
–
OUT
GND
1
3
Vref
5
CD
2
RN5VD
SELECTION GUIDE
The detector threshold, the output type, the packing type, and the taping type of RN5VD Series can be desig-
nating at the user's request by specifying the part number as follows :
–
RN5VD×××× ×× ← Part Number
↑ ↑ ↑
↑
a b c
d
Code
Contents
Setting Detector Threshold (–VDET) :
Stepwise setting with a step of 0.1V in the range of 0.9V to 6.0V is possible.
a
Designation of Output Type
A: Nch Open Drain
C: CMOS
b
c
Designation of Packing Type
A: Taping
C: Antistatic bag for samples
Designation of Taping Type:
Ex. SOT-23-5: TR, TL
(refer to Taping Specification)
“TR” is prescribed as a standard.
d
For example, the Product with Detector Threshold 3.5V, Output Type Nch Open Drain and Taping Type TR,
is designated by Part Number RN5VD35AA-TR.
3
RN5VD
PIN CONFIGURATION
• SOT-23-5
5
4
(mark side)
1
2
3
PIN DESCRIPTION
Pin No.
Symbol
OUT
VDD
Description
1
2
3
4
5
Output Pin
Input and power source for device itself
Ground Pin
GND
NC
No Connection
CD
Pin for external capacitor (for setting output delay)
4
RN5VD
ABSOLUTE MAXIMUM RATINGS
Symbol
Item
Rating
Unit
VDD
12
V
Supply Voltage
Output Voltage
CNOS
Nch
VSS–0.3 to VDD+0.3
VSS–0.3 to 12
VOUT
V
IOUT
PD
Output Current
70
mA
mW
˚C
Power Dissipation
150
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering)
–40 to +85
–55 to +125
260˚C, 10s
Topt
Tstg
˚C
Tsolder
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum ratings are threshold limit values that must not be exceeded even for an instant under any
conditions. Moreover, such values for any two items must not be reached simultaneously. Operation above
these absolute maximum ratings may cause degradation or permanent damage to the device. These are stress
ratings only and do not necessarily imply functional operation below these limits.
5
RN5VD
ELECTRICAL CHARACTERISTICS
• RN5VD09A/C
Topt=25˚C
Symbol
Item
Conditions
MIN.
0.878
0.027
TYP.
MAX.
Unit.
–VDET
VHYS
Detector Threshold
0.900
0.045
1.5
0.922
0.063
3.7
V
V
Detector Threshold Hysteresis
VDD=0.8V
VDD=2.9V
µA
V
ISS
Supply Current
0.9
2.7
VDDH
VDDL
Maximum Operating Voltage
10
Topt=25˚C
0.55
0.65
0.05
0.50
2.0
0.70
0.80
Minimum Operating Voltage
(Note 1)
V
–30˚C≤Topt≤85˚C
VDS=0.05V, VDD=0.7V
VDS=0.5V, VDD=0.85V
VDS=–2.1V, VDD=4.5V
VDD=0.99V
0.01
0.05
1.0
Nch
Pch
mA
IOUT
Output Current
mA
V
VTCD
ICD
CD pin Threshold Voltage
CD pin Sink Current
Delay Resistance
0.297
0.495
0.693
2.0
VDS=0.1V, VDD=0.7V
VDS=0.5V, VDD=0.85V
2.0
30
µA
MΩ
10.0
100.0
RD
0.5
1.0
∆–VDET
∆Topt
Detector Threshold
Temperature Coefficient
–30˚C≤Topt≤85˚C
±100
ppm/˚C
(Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch
Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V.
6
RN5VD
• RN5VD18A/C
Symbol
Topt=25˚C
Item
Conditions
MIN.
1.755
0.054
TYP.
1.800
0.090
MAX.
1.845
0.126
Unit.
–VDET
VHYS
Detector Threshold
V
V
Detector Threshold Hysteresis
VDD=1.7V
VDD=3.8V
2.5
1.0
5.0
3.0
µA
V
ISS
Supply Current
VDDH
VDDL
Maximum Operating Voltage
10
Minimum Operating Voltage
(Note 1)
Topt=25˚C
–30˚C≤Topt≤85˚C
0.55
0.65
0.70
0.80
V
VDS=0.05V, VDD=0.7V
VDS=0.5V, VDD=1.5V
VDS=–2.1V, VDD=4.5V
VDD=1.98V
0.01
1.0
0.05
2.0
Nch
Pch
mA
IOUT
Output Current
1.0
2.0
mA
V
VTCD
ICD
CD pin Threshold Voltage
CD pin Sink Current
Delay Resistance
0.693
0.990
1.287
2.0
VDS=0.1V, VDD=0.7V
VDS=0.5V, VDD=1.5V
2.0
30
µA
MΩ
200.0
800.0
RD
0.5
1.0
DET
∆–V
Detector Threshold
Temperature Coefficient
–30˚C≤Topt≤85˚C
±100
ppm/˚C
∆Topt
(Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch
Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V.
7
RN5VD
• RN5VD27A/C
Symbol
Topt=25˚C
Item
Conditions
MIN.
2.633
0.081
TYP.
2.700
0.135
MAX.
2.767
0.189
Unit.
–VDET
VHYS
Detector Threshold
V
V
Detector Threshold Hysteresis
VDD=2.6V
VDD=4.7V
3.5
1.1
7.0
3.3
µA
V
ISS
Supply Current
VDDH
VDDL
Maximum Operating Voltage
10
Minimum Operating Voltage
(Note 1)
Topt=25˚C
–30˚C≤Topt≤85˚C
0.55
0.65
0.70
0.80
V
VDS=0.05V, VDD=0.7V
VDS=0.5V, VDD=1.5V
VDS=–2.1V, VDD=4.5V
VDD=2.97V
0.01
1.0
0.05
2.0
Nch
Pch
mA
IOUT
Output Current
1.0
2.0
mA
V
VTCD
ICD
CD pin Threshold Voltage
CD pin Sink Current
Delay Resistance
1.188
1.485
1.782
2.0
VDS=0.1V, VDD=0.7V
VDS=0.5V, VDD=1.5V
2.0
30
µA
MΩ
200.0
800.0
RD
0.5
1.0
∆–VDET
∆Topt
Detector Threshold
Temperature Coefficient
–30˚C≤Topt≤85˚C
±100
ppm/˚C
( Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch
Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V.
8
RN5VD
• RN5VD36A/C
Symbol
Topt=25˚C
Item
Conditions
MIN.
3.510
0.108
TYP.
3.600
0.180
MAX.
3.690
0.252
Unit.
–VDET
VHYS
Detector Threshold
V
V
Detector Threshold Hysteresis
VDD=3.47V
VDD=5.6V
4.5
1.2
9.0
3.6
µA
V
ISS
Supply Current
VDDH
VDDL
Maximum Operating Voltage
10
Minimum Operating Voltage
(Note 1)
Topt=25˚C
–30˚C≤Topt≤85˚C
0.55
0.65
0.70
0.80
V
VDS=0.05V, VDD=0.7V
VDS=0.5V, VDD=1.5V
VDS=–2.1V, VDD=4.5V
VDD=3.96V
0.01
1.0
0.05
2.0
Nch
Pch
mA
IOUT
Output Current
1.0
2.0
mA
V
VTCD
ICD
CD pin Threshold Voltage
CD pin Sink Current
Delay Resistance
1.584
1.980
2.376
2.0
VDS=0.1V, VDD=0.7V
VDS=0.5V, VDD=1.5V
2.0
30
µA
MΩ
200.0
800.0
RD
0.5
1.0
∆–VDET
∆Topt
Detector Threshold
Temperature Coefficient
–30˚C≤Topt≤85˚C
±100
ppm/˚C
(Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch
Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V.
9
RN5VD
• RN5VD45A/C
Symbol
Topt=25˚C
Item
Conditions
MIN.
4.388
0.135
TYP.
4.500
0.225
MAX.
4.612
0.315
Unit.
–VDET
VHYS
Detector Threshold
V
V
Detector Threshold Hysteresis
DD
V
=4.34V
5.5
1.3
11.0
3.9
µA
V
ISS
Supply Current
DD
V
=6.5V
VDDH
VDDL
Maximum Operating Voltage
10
Minimum Operating Voltage
(Note 1)
Topt=25˚C
–30˚C≤Topt≤85˚C
0.55
0.65
0.70
0.80
V
VDS=0.05V, VDD=0.7V
VDS=0.5V, VDD=1.5V
VDS=–2.1V, VDD=8.0V
VDD=4.95V
0.01
1.0
0.05
2.0
Nch
Pch
mA
IOUT
Output Current
1.5
3.0
mA
V
VTCD
ICD
CD pin Threshold Voltage
CD pin Sink Current
Delay Resistance
1.980
2.475
2.970
2.0
VDS=0.1V, VDD=0.7V
VDS=0.5V, VDD=1.5V
2.0
30
µA
MΩ
200.0
800.0
RD
0.5
1.0
∆–VDET
∆Topt
Detector Threshold
Temperature Coefficient
–30˚C≤Topt≤85˚C
±100
ppm/˚C
(Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch
Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V.
10
RN5VD
• RN5VD54A/C
Symbol
Topt=25˚C
Item
Conditions
MIN.
5.265
0.162
TYP.
5.400
0.270
MAX.
5.535
0.378
Unit.
–VDET
VHYS
Detector Threshold
V
V
Detector Threshold Hysteresis
VDD=5.2V
VDD=7.4V
6.0
1.4
12.0
4.2
µA
V
ISS
Supply Current
VDDH
VDDL
Maximum Operating Voltage
10
Minimum Operating Voltage
(Note 1)
Topt=25˚C
–30˚C≤Topt≤85˚C
0.55
0.65
0.70
0.80
V
VDS=0.05V, VDD=0.7V
VDS=0.5V, VDD=1.5V
VDS=–2.1V, VDD=8.0V
VDD=5.94V
0.01
1.0
0.05
2.0
Nch
Pch
mA
IOUT
Output Current
1.5
3.0
mA
V
VTCD
ICD
CD pin Threshold Voltage
CD pin Sink Current
Delay Resistance
2.376
2.970
3.564
2.0
VDS=0.1V, VDD=0.7V
VDS=0.5V, VDD=1.5V
2.0
30
µA
MΩ
200.0
800.0
RD
0.5
1.0
∆–VDET
∆Topt
Detector Threshold
Temperature Coefficient
–30˚C≤Topt≤85˚C
±100
ppm/˚C
(Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch
Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V.
11
RN5VD
ELECTRICAL CHARACTERISTICS BY DETECTOR THRESHOLD
• RN5VD09A/C to RN5VD39A/C
Detector Threshold
–VDET (V)
Hysteresis
VHYS (V)
Supply Current 1 Supply Current 2 Output Current 1
Output Current 2
IOUT2 (mA)
Part Number.
Iss1 (µA)
Iss2 (µA)
IOUT1 (mA)
condi-
tions
condi-
tions
condi-
tions
TYP. MAX.
TYP. MAX.
TYP. MAX.
TYP. MAX.
MIN. TYP.
MIN. TYP.
MIN
.
MIN
.
conditions
RN5VD09A/C
RN5VD10A/C
RN5VD11A/C
RN5VD12A/C
RN5VD13A/C
RN5VD14A/C
RN5VD15A/C
RN5VD16A/C
RN5VD17A/C
RN5VD18A/C
RN5VD19A/C
RN5VD20A/C
RN5VD21A/C
RN5VD22A/C
RN5VD23A/C
RN5VD24A/C
RN5VD25A/C
RN5VD26A/C
RN5VD27A/C
RN5VD28A/C
RN5VD29A/C
RN5VD30A/C
RN5VD31A/C
RN5VD32A/C
RN5VD33A/C
RN5VD34A/C
RN5VD35A/C
RN5VD36A/C
RN5VD37A/C
RN5VD38A/C
RN5VD39A/C
0.878 0.900 0.922 0.027 0.045 0.063
0.975 1.000 1.025 0.030 0.050 0.070
1.073 1.100 1.127 0.033 0.055 0.077
1.170 1.200 1.230 0.036 0.060 0.084
1.268 1.300 1.332 0.039 0.065 0.091
1.365 1.400 1.435 0.042 0.070 0.098
1.463 1.500 1.537 0.045 0.075 0.105
1.560 1.600 1.640 0.048 0.080 0.112
1.658 1.700 1.742 0.051 0.085 0.119
1.755 1.800 1.845 0.054 0.090 0.126
1.853 1.900 1.947 0.057 0.095 0.133
1.950 2.000 2.050 0.060 0.100 0.140
2.048 2.100 2.152 0.063 0.105 0.147
2.145 2.200 2.255 0.066 0.110 0.154
2.243 2.300 2.357 0.069 0.115 0.161
2.340 2.400 2.460 0.072 0.120 0.168
2.438 2.500 2.562 0.075 0.125 0.175
2.535 2.600 2.665 0.078 0.130 0.182
2.633 2.700 2.767 0.081 0.135 0.189
2.730 2.800 2.870 0.084 0.140 0.196
2.828 2.900 2.972 0.087 0.145 0.203
2.925 3.000 3.075 0.090 0.150 0.210
3.023 3.100 3.177 0.093 0.155 0.217
3.120 3.200 3.280 0.096 0.160 0.224
3.218 3.300 3.382 0.099 0.165 0.231
3.315 3.400 3.485 0.102 0.170 0.238
3.413 3.500 3.587 0.105 0.175 0.245
3.510 3.600 3.690 0.108 0.180 0.252
3.608 3.700 3.792 0.111 0.185 0.259
3.705 3.800 3.895 0.114 0.190 0.266
3.803 3.900 3.997 0.117 0.195 0.273
0.9
2.7
DD
V
=
1.5
1.8
2.0
3.7
4.5
5.0
0.05 0.5
0.85V
DD
V
=
0.2
1.0
1.0V
1.0
3.0
2.5
3.0
3.5
4.0
4.5
5.0
6.0
7.0
8.0
9.0
DD
V
=
DET
(–V
)
–
0.10V
Nch
Nch
DD
V
=
VDS=
0.05V 0.01 0.05
DET
–V
(
)
VDS=
1.1
3.3
+
2.0V
0.5V
V
DD=
0.7V
V
DD=
1.5V 1.0
2.0
DD
V
=
DET
(–V
)
1.2
3.6
–0.13V
(Note) Refer to the previously defined “Minimum Operating Voltage”.
Condition 1 : Topt=25˚C
Condition 2 : –30˚C≤Topt≤85˚C
12
RN5VD
Topt=25˚C
Detector
Threshold
Tempco.
Minimum Oper-
ating Voltage
C
D
Pin Output
Delay
Output Current 3
IOUT3 (mA)
CD
Pin Threshold Voltage
VTCD (V)
CD
Pin Output Current 2
ICD2 (µA)
Current 1
Resistance
DET (ppm/˚C)
∆–V
VDDL (V)
ICD1 (µA)
RD (MΩ)
∆Topt
condi-
tions
condi-
tions
condi-
tions
condi-
TYP.
tions
MIN. TYP. TYP. MAX.
MIN. TYP. MAX.
MIN. TYP.
MIN. TYP. MIN. TYP. MAX.
conditions
V
0.3
DD
×
V
0.5
DD
×
V
0.7
DD
×
V
DD=
10
100
0.85V
V
DD=
50
200
1.0V
V
DD
×
V
DD
×
V
DD
×
0.35
0.5
0.65
ch
P
(Note1) (Note1)
V
DS=
Condition1 Condition1
0.1V
–
30˚C≤
DD
V
=
DS
=
V
0.55
0.70
VDS=
0.5V
Topt
DET
–V
(
)
–
2.1V 1.0
2.0
2.0
30
0.5
1.0
2.0
±100
≤85˚C
VDD
=
1.1V
×
Condition2 Condition2
0.7V
DD
=
V
0.65
0.80
4.5V
=
DD
1.5V
V
200 800
V
DD
×
V
DD
×
V
DD
×
0.4
0.5
0.6
13
RN5VD
• RN5VD40A/C to RN5VD60A/C
Detector Threshold
Hysteresis
VHYS (V)
Supply Current 1 Supply Current 2 Output Current 1
Output Current 2
IOUT2 (mA)
Part Number.
–VDET (V)
Iss1 (µA)
Iss2 (µA)
IOUT1 (mA)
condi-
tions
condi-
tions
condi-
tions
MIN. TYP. MAX. MIN. TYP. MAX.
TYP. MAX.
TYP. MAX.
MIN. TYP.
MIN. TYP.
conditions
RN5VD40A/C
RN5VD41A/C
RN5VD42A/C
RN5VD43A/C
RN5VD44A/C
RN5VD45A/C
RN5VD46A/C
RN5VD47A/C
RN5VD48A/C
RN5VD49A/C
RN5VD50A/C
RN5VD51A/C
RN5VD52A/C
RN5VD53A/C
RN5VD54A/C
RN5VD55A/C
RN5VD56A/C
RN5VD57A/C
RN5VD58A/C
RN5VD59A/C
RN5VD60A/C
3.900 4.000 4.100 0.120 0.200 0.280
3.998 4.100 4.202 0.123 0.205 0.287
4.095 4.200 4.305 0.126 0.210 0.294
4.193 4.300 4.407 0.129 0.215 0.301
4.290 4.400 4.510 0.132 0.220 0.308
4.388 4.500 4.612 0.135 0.225 0.315
4.485 4.600 4.715 0.138 0.230 0.322
4.583 4.700 4.817 0.141 0.235 0.329
4.680 4.800 4.920 0.144 0.240 0.336
4.778 4.900 5.022 0.147 0.245 0.343
4.875 5.000 5.125 0.150 0.250 0.350
4.973 5.100 5.227 0.153 0.255 0.357
5.070 5.200 5.330 0.156 0.260 0.364
5.168 5.300 5.432 0.159 0.265 0.371
5.265 5.400 5.535 0.162 0.270 0.378
5.0 10.0
V
DD
=
(–VDET
)
1.3
3.9
–0.16V
5.5 11.0
ch
N
ch
N
DD
DS
V =
0.05V 0.01 0.05
V
=
DD
V
=
DET
(–V
)
1.0
2.0
DS
= 1.5V
V
+
2.0V
0.5V
DD
=
V
6.0 12.0
0.7V
VDD
=
5.363 5.500 5.637 0.165 0.275 0.385 (–VDET
)
1.4
4.2
–0.20V
5.460 5.600 5.740 0.168 0.280 0.392
5.558 5.700 5.842 0.171 0.285 0.399
5.655 5.800 5.945 0.174 0.290 0.406
5.753 5.900 6.047 0.177 0.295 0.413
5.850 6.000 6.150 0.180 0.300 0.420
6.5 13.0
(Note) Refer to the previously defined “Minimum Operating Voltage”.
Condition 1 : Topt=25˚C
Condition 2 : –30˚C≤Topt≤85˚C
14
RN5VD
Topt=25˚C
Detector
Threshold
Tempco.
C
D
Pin Output
Delay
Minimum Oper-
ating Voltage
Output Current 3
C
D
Pin Threshold Voltage
VTCD (V)
C
D
Pin Output Current 2
IOUT1 (mA)
Current 1
Resistance
∆–VDET
(ppm/˚C)
∆Topt
IOUT3 (mA)
condi-
VDDL (V)
ICD1 (µA)
IOUT2 (mA)
condi-
tions
condi-
tions
condi-
tions
condi-
TYP.
tions
MIN. TYP. TYP. MAX.
MIN. TYP. MAX.
MIN. TYP.
MIN. TYP.
TYP. MAX.
conditions
tions
ch
P
(Note1) (Note1)
V
DS
=
Condition1 Condition1
–30˚C≤
0.1V
=
DD
V
DD
=
V
V
DS=
0.55
0.70
V
DS
=
Topt
V
DD
×
V
DD
×
V
DD
×
(–VDET
)
1.5V
–
2.1V 1.5
3.0
2.0
30
0.5V
200 800
0.5
1.0
2.0
±100
≤85˚C
VDD=
0.4
0.5
0.6V
1.1V
×
Condition2 Condition2
0.7V
V
DD=
0.65
0.80
8.0V
15
RN5VD
OPERATION
VDD
Current Source
RD
Ra Comparator
–
Pch
Nch
Schmitt Trigger
+
OUT
GND
Rb
Tr.2
Tr.1
Rc
CD
Output Capacitor
FIG. 1 Block Diagram
1
2
3
4
5
Step
Step 1 Step 2
Step 3
Step 4 Step 5
Comparator (–) Pin
Input Voltage
I
II
H
II
II
H
I
B
Released Voltage +VDET
Detector Threshold Hysteresis
A
Detected Voltage –VDET
Supply Voltage
(VDD)
Comparator Output
L
Indefinite
Indefinite
Indefinite
L
Tr. 1, 2
OFF ON
OFF ON
ON OFF
ON OFF
Minimum Operaing Voltage
GND
Nch
Output Tr.
Pch
ON OFF Indefinite OFF ON
Output Voltage
(OUT)
Delay Time
Rb + Rc
· VDD
I.
Ra + Rb + Rc
Rb
GND
· VDD
II.
Ra + Rb
FIG. 2 Operation Diagram
Step 1. Output Voltage is equal to Pull-up Voltage.
Step 2. When Input Voltage(VDD) reaches the state of Vref≥VDD · (Rb+Rc) /(Ra+Rb+Rc) at Point A (Detected Voltage –VDET) , the output of Comparator is
reversed, so that Output Voltage becomes GND. Discharging is performed from CD pin connected to External Capacitor. No delay time is generated.
Step 3. Output Voltage becomes indefinite when Power Source Voltage(VDD) is smaller than Minimum Operating Voltage. When the output is pulled up, VDD is
output.
Step 4. Output Voltage becomes equal to GND.
Step 5. When Input Voltage(VDD) reaches the state of Vref≤VDD · Rb/(Ra+Rb) at Point B (Released Voltage +VDET) , the output of Comparator is reversed,
6
and the External Capacitor is charged through CD pin, so that Output Voltage becomes equal to Pulled-up Voltage after a delay time tD (=0.69×10 ×CD) .
16
RN5VD
•
Output Delay Operation
Supply Voltage
(VDD)
Released Voltage (+VDET)
CD pin Voltage
CD pin Threshold Voltage (VTCD)
GND
Output Voltage
(OUT)
GND
Output Delay Time (tD)
When the Supply Voltage crosses the Released Voltage (+VDET) from a low value to a value higher
than the Released Voltage (+VDET) , the CD pin Voltage starts to increase (starts to charge the external
capacitor).
The Output Voltage is maintained at
“
L
”
level until the CD pin Voltage reaches to VTCD (CD pin Threshold
state.
Voltage) after that the Output Voltage is reversed to
“H”
The time period from beginning of charging capacitor to Output Voltage reversing represents the
Output Delay (tD) .
•
Output Delay Time
Delay time (tD) can be set accordance with the capacitance CD of external capacitor as below
6
tD=0.69×10 ×CD (s)
17
RN5VD
TEST CIRCUITS
ISS
+5V or VDD
470kΩ
VDD
VDD
VIN
VIN
RN5VD
SERIES
RN5VD
SERIES
OUT
GND
GND
FIG. 3 Supply Current test Circuit
FIG. 4 Detector Threshold Test Circuit
VDD
VDD
IOUT
VIN
IOUT
VIN
RN5VD××
C
RN5VD
SERIES
SERIES
OUT
OUT
VDD+VDS
VDS
GND
GND
FIG. 5 Nch Driver Output Current Test Circuit
FIG. 6 Pch Driver Output Current Test Circuit
+5V or VDD
VDD
VDD
VIN
470kΩ
OUT
ICD
VIN
RN5VD
SERIES
CD
RN5VD
SERIES
CD
OUT
VDS
VDS
GND
GND
FIG. 7 CD pin Threshold Voltage Test Circuit
FIG. 8 CD pin Sink Current Test Circuit
+VDET+2.0V
+5V
VDD
470kΩ
Input Voltage
CD
RN5VD
SERIES
VIN
OUT
0.7V
GND
GND
CD
100%
50%
Output Voltage
FIG. 9 Output Delay Time Test Circuit
GND
tPHL
tD
) at FIG.4,7,9. CMOS Output Type does not
need a pull-up resistor.
*
18
RN5VD
TYPICAL CHARACTERISTICS
1) Supply Current vs. Input Voltage
RN5VD09×
RN5VD27×
3.0
5
4
2.5
Topt=80˚C
2.0
25˚C
3
2
1.5
–30˚C
Topt=80˚C
25˚C
1.0
0.5
0
1
0
–30˚C
0
2
4
6
8
10
0
2
4
6
8
10
Input Voltage VIN(V)
Input Voltage VIN(V)
RN5VD45×
8
7
6
Topt=80˚C
25˚C
5
4
3
2
1
–30˚C
0
0
2
4
6
8
10
Input Voltage VIN(V)
2) Detector Threshold vs. Temperature
RN5VD09×
RN5VD27×
0.98
2.90
2.85
2.80
2.75
2.70
2.65
2.60
0.96
+VDET
+VDET
0.94
0.92
–VDET
–VDET
0.90
0.88
0.86
–40
–20
0
20
40
60
80
–40
–20
0
20
40
60
80
Temperature Topt(˚C)
Temperature Topt(˚C)
19
RN5VD
RN5VD45×
+VDET
4.9
4.8
4.7
4.6
4.5
4.4
–VDET
–40 –20
0
20
40
60
80
Temperature Topt(˚C)
3) Output Voltage vs. Input Voltage
5V Pull-up
VDD Pull-up
RN5VD09A
RN5VD09A
470kΩ
470kΩ
6
1.0
0.8
0.6
0.4
0.2
0
5
4
–30˚C
Topt=80˚C
25˚C
3
2
Topt=80˚C
25˚C
–30˚C
1
0
0
0.2
0.4
0.6
0.8
1.0
0
0.2
0.4
0.6
0.8
1
Input Voltage VIN(V)
Input Voltage VIN(V)
VDD Pull-up
5V Pull-up
RN5VD27A
RN5VD27A
470kΩ
470kΩ
3.0
2.5
2.0
1.5
1.0
0.5
0
6
5
4
3
2
1
0
Topt=–30˚C
25˚C
80˚C
Topt= –30˚C
25˚C
80˚C
1.0
Input Voltage VIN(V)
0
0.5
1.5
2.0
2.5
3.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Input Voltage VIN(V)
20
RN5VD
VDD Pull-up
5V Pull-up
RN5VD45A
RN5VD45A
470kΩ
470kΩ
6
5
5
4
3
2
1
0
Topt= –30˚C
4
3
2
1
0
25˚C
80˚C
Topt= –30˚C
25˚C
80˚C
0
1
2
3
4
5
0
1
2
3
4
5
Input Voltage VIN(V)
Input Voltage VIN(V)
4) Nch Driver Output Current vs. VDS
RN5VD09×
RN5VD27×
0.45
16
0.40
14
12
10
8
VDD=0.85V
VDD=2.5V
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
2.0V
6
4
1.5V
0.7V
2
0
0
0.2
0.4
0.6
0.8
1.0
0
0.5
1.0
1.5
2.0
2.5
VDS(V)
VDS(V)
RN5VD45×
40
35
30
25
20
15
10
5
VDD=4.0V
3.5V
3.0V
2.5V
2.0V
1.5V
0
0
1
2
3
4
VDS(V)
21
RN5VD
5) Nch Driver Output Current vs. Input Voltage
RN5VD09×
RN5VD27×
VDS=0.5V
VDS=0.5V
25˚C
12
10
8
0.7
0.6
0.5
Topt = –30˚C
0.4
6
Topt = 80˚C
0.3
80˚C
4
25˚C
0.2
0.1
0
2
–30˚C
0.8
0
0
0.2
0.4
0.6
1.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Input Voltage VIN(V)
Input Voltage VIN(V)
RN5VD45×
VDS=0.5V
18
16
14
12
10
8
Topt = – 30˚C
25˚C
80˚C
6
4
2
0
0
1
2
3
4
5
Input Voltage VIN(V)
6) Pch Driver Output Current vs. Input Voltage
RN5VD09C
RN5VD27C
4.0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
VDS = –2.1V
VDS = –2.1V
3.5
3.0
–1.5V
–1.5V
–1.0V
2.5
–1.0V
–0.5V
2.0
1.5
1.0
0.5
0
–0.5V
0
2
4
6
8
10
0
2
4
6
8
10
Input Voltage VIN(V)
Input Voltage VIN(V)
22
RN5VD
RN5VD45C
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
VDS =–2.1V
–1.5V
–1.0V
–0.5V
0
0
2
4
6
8
10
Input Voltage VIN(V)
7) CD pin Threshold Voltage vs. Temperature
RN5VD09×
RN5VD27×
VDD=0.99V
VDD=2.97V
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.8
1.7
1.6
1.5
1.4
1.3
1.2
–40
–20
0
20
40
60
80
–40
–20
0
20
40
60
80
Temperature Topt(˚C)
Temperature Topt(˚C)
RN5VD45×
VDD=4.95V
2.8
2.7
2.6
2.5
2.4
2.3
2.2
–40
–20
0
20
40
60
80
Temperature Topt(˚C)
23
RN5VD
8) Cd pin Sink Current vs. Input Voltage
RN5VD09×
RN5VD27×
VDS=0.5V
VDS=0.5V
3.0
2.5
2.0
1.5
1.0
0.5
0
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
Topt = –30˚C
25˚C
80˚C
Topt = 80˚C
25˚C
–30˚C
0.8
0
0.2
0.4
0.6
1.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Input Voltage VIN(V)
Input Voltage VIN(V)
RN5VD45×
VDS=0.5V
5
4
3
2
1
0
Topt = –30˚C
25˚C
80˚C
2
3
4
5
0
1
Input Voltage VIN(V)
9) Cd pin Sink Current vs. Cd pin Voltage
RN5VD27×
4.0
RN5VD09×
0.12
3.5
3.0
2.5
2.0
1.5
VDD = 2.5V
0.10
VDD = 0.85V
0.08
0.06
0.04
2.0V
1.0
0.5
0
1.5V
0.7V
0.02
0
0.5
1.0
1.5
2.0
2.5
0
CD pin Voltage VDS(V)
0
0.2
0.4
0.6
0.8
1.0
CD pin Voltage VCD(V)
24
RN5VD
RN5VD45×
10
VDD = 4.0V
3.5V
8
6
4
2
0
3.0V
2.5V
2.0V
1.5V
0
1
2
3
4
CD pin Voltage VDS(V)
10) Output delay Time vs. External Capacitance
RN5VD09A
RN5VD27A
1000
1000
100
10
100
10
tD
tD
1
1
tPHL
tPHL
0.1
0.1
0.01
0.01
0.0001
0.001
0.01
0.1
1
0.0001
0.001
0.01
0.1
1
External Capacitance CD(µF)
External Capacitance CD(µF)
11) Delay Resistance vs. Temperature
RN5VD45A
1000
RN5VD×××
1.6
100
10
1.4
1.2
1.0
0.8
0.6
0.4
tD
1
tPHL
0.1
0.01
0.0001
0.001
0.01
0.1
1
–40
–20
0
20
40
60
80
External Capacitance CD(µF)
Temperature Topt(˚C)
25
RN5VD
TYPICAL APPLICATIONS
• RN5VD××A CPU Reset Circuit (Nch Open Drain Output)
(1) Input Voltage to RN5VD××A is
(2) Input Voltage to RN5VD××A is
the same as the input voltage to CPU.
different from the input voltage to CPU.
VDD1
VDD
VDD2
VDD
VDD
VDD
VDD
R
R
CD
CD
CPU
CPU
RN5VD××
SERIES
A
RN5VD××
SERIES
A
RESET
GND
RESET
OUT
OUT
GND
CD
CD
GND
GND
• RN5VD××C CPU Reset Circuit (CMOS Output)
VDD
VDD
VDD
CD
CPU
RN5VD××
SERIES
C
RESET
GND
OUT
CD
GND
•
Memory Back-up Circuit
VDD
VCC
Y1
Y2
Y3
Y4
D1
VCC
VCC
VCC
VCC
D2
A
B
RAM1
RAM2
RAM3
RAM4
G
GND CS
GND CS
GND CS
GND CS
GND
VDD
RN5VD××
OUT
CD
C
SERIES
CD
GND
26
RN5VD
•
Manual Reset Circuit
VDD
VDD
VDD
VDD
R
CD
CD
CD
CD
RN5VD××
SERIES
A
RN5VD××C
SERIES
OUT
OUT
GND
GND
APPLICATION HINTS
VDD
VDD
VDD
R1
VDD
R2
RN5VD
SERIES
CD
OUT
CD
RN5VD
SERIES
OUT
GND
GND
FIG.11
FIG.10
1. When RN5VD××C (CMOS Output) is used in FIG.10,this IC may oscillate by the through-type current at the detec-
tion when impedance is connected between Power Source VDD and RN5VD VDD Pin.When RN5VD××A (Nch Open
Drain Output) is used in FIG.10, and R becomes excessively large, Detector Threshold may be varied because of the
voltage drop of the supply current in the IC itself.
2. The connection as shown in FIG. 11 may cause the oscillation in both RN5VD××C (CMOS Output) and RN5VD××A
(Nch Open Drain Output)
27
RN5VD12AA-TR-FA 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
RN5VD12AA-TR-FB | RICOH | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO5, PLASTIC, SOT-23, 5 PIN | 获取价格 | |
RN5VD12AA-TR-FE | RICOH | Power Supply Support Circuit, Fixed, 1 Channel, +1.2VV, CMOS, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN | 获取价格 | |
RN5VD12AC | RICOH | VOLTAGE DETECTOR WITH OUTPUT DELAY | 获取价格 | |
RN5VD12AC-TL | RICOH | VOLTAGE DETECTOR WITH OUTPUT DELAY | 获取价格 | |
RN5VD12AC-TL-FA | RICOH | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO5, SOT-23, 5 PIN | 获取价格 | |
RN5VD12AC-TL-FB | RICOH | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO5, SOT-23, 5 PIN | 获取价格 | |
RN5VD12AC-TR | RICOH | VOLTAGE DETECTOR WITH OUTPUT DELAY | 获取价格 | |
RN5VD12AC-TR-FA | RICOH | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO5, SOT-23, 5 PIN | 获取价格 | |
RN5VD12AC-TR-FB | RICOH | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO5, SOT-23, 5 PIN | 获取价格 | |
RN5VD12C | RICOH | Power Management Circuit, Fixed, +1.2VV, CMOS, PDSO5 | 获取价格 |
RN5VD12AA-TR-FA 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6