RP101K121B-TR [RICOH]
Supply Current Typ. 18uA;型号: | RP101K121B-TR |
厂家: | RICOH ELECTRONICS DEVICES DIVISION |
描述: | Supply Current Typ. 18uA |
文件: | 总33页 (文件大小:394K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RP101x SERIES
0.6% ACCURACY LOW NOISE 300mA LDO REGULATOR
NO.EA-167-160425
OUTLINE
The RP101x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference
unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the RP101x Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5 and
DFN(PLP)1612-4 (t0.6mm type) or DFN(PLP)1612-4B (t0.4mm type), therefore high density mounting of the
ICs on boards is possible.
FEATURES
Supply Current .............................................................Typ. 18A
Standby Current ...........................................................Typ. 0.1A
Dropout Voltage............................................................Typ. 0.13V (IOUT150mA, VOUT2.8V)
Ripple Rejection ...........................................................Typ. 75dB (f1kHz)
Temperature-Drift Coefficient of Output Voltage ..........Typ. 30ppm/C
Line Regulation ............................................................Typ. 0.02%/V
Output Voltage Accuracy..............................................0.6%
Packages......................................................................DFN(PLP)1612-4, DFN(PLP)1612-4B, SOT-23-5
Input Voltage Range.....................................................1.7V to 5.25V
Output Voltage Range..................................................1.2V to 3.3V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
Built-in Fold Back Protection Circuit.............................Typ. 40mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC .... 1.0F or more
APPLICATIONS
Power source for portable communication equipment.
Power source for electrical appliances such as cameras, VCRs and camcorders.
Power source for battery-powered equipment.
Power source for home appliances.
1
RP101x
NO.EA-167-160425
BLOCK DIAGRAMS
RP101xxxxB
RP101xxxxD
VDD
VDD
VOUT
VOUT
Vref
Current Limit
Vref
Current Limit
CE
CE
GND
GND
SELECTION GUIDE
The output voltage, auto discharge function, package, and the taping type, etc. for the ICs can be selected at
the user’s request.
Product Name
RP101Kxx1-TR
RP101Kxx2-TR
RP101Nxx1-TR-FE
Package
Quantity per Reel
5,000 pcs
Pb Free
Yes
Halogen Free
Yes
Yes
Yes
DFN(PLP)1612-4 (t0.6mm)
DFN(PLP)1612-4B (t0.4mm)
SOT-23-5
5,000 pcs
Yes
3,000 pcs
Yes
xx: The output voltage can be designated in the range from 1.2V(12) to 3.3V(33) in 0.1V steps.
(For other voltages, please refer to MARK INFORMATIONS.)
: CE pin polarity and auto discharge function at off state are options as follows.
(B) "H" active, without auto discharge function at off state
(D) "H" active, with auto discharge function at off state
2
RP101x
NO.EA-167-160425
PIN CONFIGURATIONS
DFN(PLP)1612-4, DFN(PLP)1612-4B
Top View Bottom View
SOT-23-5
5
4
4
3
3
4
(mark side)
1
2
3
1
2
2
1
PIN DESCRIPTIONS
DFN(PLP)1612-4, DFN(PLP)1612-4B
Pin No
Symbol
Pin Description
1
2
3
4
VOUT
Output Pin
Ground Pin
GND
CE
Chip Enable Pin ("H" Active)
Input Pin
VDD
) Tab is GND level. (They are connected to the reverse side of this IC.)
The tab is better to be connected to the GND, but leaving it open is also acceptable.
SOT-23-5
Pin No
Symbol
VDD
Pin Description
1
2
3
4
5
Input Pin
GND
CE
Ground Pin
Chip Enable Pin ("H" Active)
No Connection
NC
VOUT
Output Pin
3
RP101x
NO.EA-167-160425
ABSOLUTE MAXIMUM RATINGS
Symbol
Item
Rating
6.0
Unit
V
VIN
Input Voltage
VCE
Input Voltage (CE Pin)
Output Voltage
Output Current
6.0
V
VOUT
IOUT
V
0.3 to VIN0.3
310
mA
Power Dissipation (DFN(PLP)1612-4)
Power Dissipation (DFN(PLP)1612-4B)
610
PD
580
mW
Power Dissipation (SOT-23-5)
Operating Temperature Range
Storage Temperature Range
420
Topt
Tstg
40 to 85
55 to 125
C
C
) For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field. The functional operation at or over these absolute maximum ratings is not assured.
4
RP101x
NO.EA-167-160425
ELECTRICAL CHARACTERISTICS
RP101xxxxB/D
VINSet VOUT1V, IOUT1mA, CINCOUT1F, unless otherwise noted.
Topt25C
Symbol
VOUT
Item
Conditions
VOUT > 2.0V
Min.
0.994
12
Typ.
Max.
1.006
12
Unit
V
Output Voltage
mV
mA
VOUT 2.0V
IOUT
Output Current
300
VOUT/
IOUT
Load Regulation
20
40
mV
1mA IOUT 150mA
0.40
0.24
0.21
0.17
0.14
0.13
18
0.50
0.38
0.34
0.30
0.25
0.23
25
1.2V VOUT < 1.5V
1.5V VOUT < 1.7V
1.7V VOUT < 2.0V
2.0V VOUT < 2.5V
2.5V VOUT < 2.8V
2.8V VOUT 3.3V
VDIF
Dropout Voltage
V
IOUT150mA
ISS
Supply Current
Standby Current
Line Regulation
IOUT0mA
VCE0V
A
A
Istandby
0.1
2.0
0.02
0.10
%/V
VOUT/VIN
Set VOUT0.5V VIN 5.0V
f1kHz, Ripple 0.2Vp-p
VINSet VOUT1V, IOUT30mA
(In case that VOUT 2.0V, VIN3.0V)
RR
Ripple Rejection
Input Voltage*1
75
dB
V
VIN
1.7
1.1
5.25
ppm
/C
VOUT/
Topt
Output Voltage
Temperature Coefficient
40C Topt 85C
VOUT0V
30
ISC
IPD
Short Current Limit
CE Pull-down Current
CE Input Voltage "H"
CE Input Voltage "L"
40
mA
A
V
0.3
VCEH
VCEL
0.3
V
BW10Hz to 100kHz
IOUT30mA
en
Output Noise
30
30
Vrms
Low Output Nch Tr. ON
Resistance (of D version)
RLOW
VIN4.0V, VCE0V
) The maximum Input Voltage of the ELECTRICAL CHARACTERISTICS is 5.25V. In case of exceeding this
specification, the IC must be operated on condition that the Input Voltage is up to 5.5V and the total operating
time is within 500hrs.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
5
RP101x
NO.EA-167-160425
TYPICAL APPLICATION
VDD
VOUT
VOUT
RP101x
Series
C1
C2
CE GND
(External Components)
C2 1.0F MURATA: GRM155B31A105KE15
TECHNICAL NOTES
When using these ICs, consider the following points:
Phase Compensation
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, use a capacitor C2 with 1.0F or more capacity.
Ceramic capacitors have different temperature characteristics and bias characteristics depending on their
dimensions and manufacturers. If the setting voltage is 2.5V or more and the capacitor’s dimensions for VOUT
equal to 1.0mm by 0.5mm or smaller than that, the capacitance value might be extremely low. As a result, the
capacitance might be much less than expected. In such cases, the operation might be unstable at low
temperature. (20C or less) In that case, use a larger capacity, or a large dimensions’ capacitor. (For example
1.6mm by 0.8mm)
If a tantalum capacitor is selected as an output capacitor, large ESR may be a cause of unstable operation.
Evaluate the operation of PCB with considerable frequency characteristics.
PCB Layout
Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.
Connect a capacitor C1 with a capacitance value as much as 1.0F or more between VDD and GND pin, and as
close as possible to the pins.
Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring
as short as possible.
6
RP101x
NO.EA-167-160425
TEST CIRCUITS
VDD
VOUT
RP101x
Series
V
C1
C2
IOUT
VOUT
CE
GND
C1=Ceramic 1.0F
C2=Ceramic 1.0F
Basic Test Circuit
VDD
VOUT
VOUT
RP101x
Series
A
C1
C2
ISS
CE GND
C1=Ceramic 1.0F
C2=Ceramic 1.0F
Test Circuit for Supply Current
Pulse
Generator
VDD
VOUT
RP101x
Series
C2
IOUT
P.G.
CE GND
C2=Ceramic 1.0F
Test Circuit for Ripple Rejection
VOUT
VDD
VOUT
RP101x
Series
C1
C2
CE
GND
IOUTa
IOUTb
C1=Ceramic 1.0F
C2=Ceramic 1.0F
Test Circuit for Load Transient Response
7
RP101x
NO.EA-167-160425
TYPICAL CHARACTERISTICS
1) Output Voltage vs. Output Current (C11.0F, C21.0F, Topt25C)
RP101x12xx
RP101x25xx
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
3.0
2.5
2.0
1.5
1.0
0.5
0
V
V
V
IN=2.2V
V
V
V
V
IN=3.5V
IN=4.2V
IN=5.0V
IN=5.5V
IN=3.6V
IN=4.2V
0
100 200 300 400 500 600
Output Current IOUT (mA)
0
100 200 300 400 500 600
Output Current IOUT (mA)
RP101x33xx
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
V
V
V
IN=4.3V
IN=5.0V
IN=5.5V
0
100 200 300 400 500 600
Output Current IOUT (mA)
2) Output Voltage vs. Input Voltage (C11.0F, C21.0F, Topt25C)
RP101x12xx RP101x25xx
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
2.8
2.4
2.0
1.6
1.2
0.8
0.4
0
I
I
I
OUT=1mA
IOUT=1mA
IOUT=30mA
IOUT=50mA
OUT=30mA
OUT=50mA
0
1
2
3
4
5
0
1
2
3
4
5
Input Voltage VIN (V)
Input Voltage VIN (V)
8
RP101x
NO.EA-167-160425
RP101x33xx
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0
1
2
3
4
5
Input Voltage VIN (V)
3) Supply Current vs. Input Voltage (C11.0F, C21.0F, Topt25C)
RP101x12xx RP101x25xx
35
30
25
20
15
10
5
35
30
25
20
15
10
5
0
0
0
1
2
3
4
5
0
1
2
3
4
5
Input Voltage VIN (V)
Input Voltage VIN (V)
RP101x33xx
35
30
25
20
15
10
5
0
0
1
2
3
4
5
Input Voltage VIN (V)
9
RP101x
NO.EA-167-160425
4) Output Voltage vs. Temperature (C11.0F, C21.0F, IOUT1mA)
RP101x12xx
RP101x25xx
V
IN=2.2V
VIN=3.5V
1.25
1.24
1.23
1.22
1.21
1.20
1.19
1.18
1.17
1.16
1.15
2.55
2.54
2.53
2.52
2.51
2.50
2.49
2.48
2.47
2.46
2.45
-40 -25
0
25
50
75 85
-40 -25
0
25
50
75 85
Temperature Topt (°C)
Temperature Topt (°C)
RP101x33xx
V
IN=4.3V
3.35
3.34
3.33
3.32
3.31
3.30
3.29
3.28
3.27
3.26
3.25
-40 -25
0
25
50
75 85
Temperature Topt (°C)
5) Supply Current vs. Temperature (C11.0F, C21.0F, IOUT0mA)
RP101x12xx
RP101x25xx
VIN=2.2V
VIN=3.5V
30
25
20
15
10
5
30
25
20
15
10
5
0
0
-40 -25
0
25
50
75 85
-40 -25
0
25
50
75 85
Temperature Topt (°C)
Temperature Topt (°C)
10
RP101x
NO.EA-167-160425
RP101x33xx
VIN=4.3V
30
25
20
15
10
5
0
-40 -25
0
25
50
75 85
Temperature Topt (°C)
6) Dropout Voltage vs. Output Current (C11.0F, C21.0F)
RP101x12xx
RP101x15xx
700
600
500
400
300
200
100
0
500
400
300
200
100
0
85°C
25°C
-40°C
85°C
25°C
-40°C
0
50
100 150 200 250 300
0
50
100 150 200 250 300
Output Current IOUT (mA)
Output Current IOUT (mA)
RP101x17xx
RP101x20xx
500
400
300
200
100
0
400
350
300
250
200
150
100
50
85°C
25°C
-40°C
85°C
25°C
-40°C
0
0
50
100 150 200 250 300
0
50
100 150 200 250 300
Output Current IOUT (mA)
Output Current IOUT (mA)
11
RP101x
NO.EA-167-160425
RP101x25xx
RP101x28xx
400
350
300
250
200
150
100
50
400
350
300
250
200
150
100
50
85°C
85°C
25°C
25°C
-40°C
-40°C
0
0
0
50
100 150 200 250 300
0
50
100 150 200 250 300
Output Current IOUT (mA)
Output Current IOUT (mA)
RP101x33xx
400
350
300
250
200
150
100
50
85°C
25°C
-40°C
0
0
50
100 150 200 250 300
Output Current IOUT (mA)
7) Dropout Voltage vs. Set Output Voltage (C11.0F, C21.0F, Topt25C)
600
10mA
30mA
100mA
150mA
200mA
300mA
500
400
300
200
100
0
1.0
1.5
2.0
2.5
3.0
3.5
Set Output Voltage VREG (V)
12
RP101x
NO.EA-167-160425
8) Ripple Rejection vs. Input Bias Voltage (C1none, C21.0F, Ripple0.2Vp-p, Topt25C)
RP101x12xx RP101x12xx
I
OUT=1mA
IOUT=30mA
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
1kHz
10kHz
100kHz
1kHz
10kHz
100kHz
1.2 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2
1.2 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2
Input Voltage VIN (V)
Input Voltage VIN (V)
RP101x28xx
RP101x28xx
C1=none
C1=none
I
OUT=1mA
IOUT=30mA
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
1kHz
10kHz
100kHz
1kHz
10kHz
100kHz
2.8
3.3
3.8
4.3
4.8
5.3
2.8
3.3
3.8
4.3
4.8
5.3
Input Voltage VIN (V)
Input Voltage VIN (V)
9) Ripple Rejection vs. Frequency (C1none, C21.0F, Ripple0.2Vp-p)
RP101x12xx RP101x25xx
13
RP101x
NO.EA-167-160425
V
IN=2.2V
VIN=3.5V
OUT=1mA
120
100
80
60
40
20
0
120
100
80
60
40
20
0
I
I
I
OUT=1mA
I
I
I
OUT=30mA
OUT=150mA
OUT=30mA
OUT=150mA
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency f (kHz)
Frequency f (kHz)
14
RP101x
NO.EA-167-160425
RP101x33xx
V
IN=4.3V
120
100
80
60
40
20
0
I
I
I
OUT=1mA
OUT=30mA
OUT=150mA
0.1
1
1
1
10
100
1000
Frequency f (kHz)
RP101x12xx
RP101x25xx
V
IN=2.2V
VIN=3.5V
120
100
80
60
40
20
0
120
100
80
60
40
20
0
-40°C
25°C
85°C
-40°C
25°C
85°C
0.1
10
100
1000
0.1
1
10
100
1000
Frequency f (kHz)
Frequency f (kHz)
RP101x33xx
V
IN=4.3V
120
100
80
60
40
20
0
-40°C
25°C
85°C
0.1
10
100
1000
Frequency f (kHz)
15
RP101x
NO.EA-167-160425
10) Input Transient Response (IOUT30mA, trtf5s, Topt25C)
RP101x12xx
RP101x25xx
3.5
5.0
4.5
4.0
3.5
3.0
3.0
Input Voltage
Input Voltage
2.5
2.0
1.203
1.198
1.193
2.506
2.501
2.496
Output Voltage
Output Voltage
1.188
2.491
0
20
40
60
80
100
0
20
40
60
80
100
Time t (μs)
Time t (μs)
RP101x33xx
6
5
4
Input Voltage
3.305
3.300
3.295
3.290
Output Voltage
0
20
40
60
80
100
Time t (μs)
11) Load Transient Response (C21.0F, Topt25C)
RP101x12xx
RP101x25xx
VIN=2.2V
V
IN=3.5V
tr=tf=0.5μs
tr=tf=0.5μs
150
100
50
150
100
50
Output Current
50mA 100mA
Output Current
50mA
100mA
0
0
2.51
2.50
2.49
2.48
2.47
2.46
1.20
1.19
1.18
1.17
1.16
Output Voltage
Output Voltage
0
20
40
60
80
100
0
20
40
60
80
100
Time t (μs)
Time t (μs)
16
RP101x
NO.EA-167-160425
RP101x33xx
RP101x12xx
V
IN=4.3V
V
IN=2.2V
tr=tf=0.5μs
tr=tf=0.5μs
150
100
50
200
150
100
50
Output Current
Output Current
1mA 150mA
50mA
100mA
0
0
3.31
3.30
3.29
3.28
3.27
3.26
1.25
1.20
1.15
1.10
1.05
1.00
Output Voltage
Output Voltage
0
20
40
60
80
100
0
0
0
20
40
60
80
100
Time t (μs)
Time t (μs)
RP101x25xx
RP101x33xx
VIN=3.5V
V
IN=4.3V
tr=tf=0.5μs
tr=tf=0.5μs
200
150
100
50
200
150
100
50
Output Current
1mA 150mA
Output Current
1mA 150mA
0
0
3.35
3.30
3.25
3.20
3.15
3.10
3.05
2.6
2.5
2.4
2.3
2.2
Output Voltage
Output Voltage
0
20
40
60
80
100
20
40
60
80
100
Time t (μs)
Time t (μs)
RP101x12xx
RP101x25xx
V
IN=2.2V
V
IN=3.5V
tr=tf=5μs
tr=tf=5μs
200
150
100
50
200
150
100
50
Output Current
Output Current
1mA 150mA
1mA
150mA
0
0
1.25
1.20
1.15
1.10
1.05
1.00
2.6
2.5
2.4
2.3
2.2
Output Voltage
Output Voltage
0
20
40
60
80
100
20
40
60
80
100
Time t (μs)
Time t (μs)
17
RP101x
NO.EA-167-160425
RP101x33xx
V
IN=4.3V
tr=tf=5μs
200
150
100
50
Output Current
1mA 150mA
0
3.35
3.30
3.25
3.20
3.15
3.10
Output Voltage
0
20
40
60
80
100
Time t (μs)
12) Turn On Speed with CE pin (C11.0F, C21.0F, Topt25C)
RP101x12xx
RP101x12xx
IOUT=0mA
IOUT=10mA
3
2
1
0
3
2
1
0
CE Input Voltage
CE Input Voltage
2
1
0
2
1
0
Output Voltage
40 60 80
Output Voltage
40 60 80
0
20
100
0
20
100
Time t (μs)
Time t (μs)
RP101x12xx
RP101x12xx
IOUT=30mA
IOUT=150mA
3
2
1
0
3
2
1
0
CE Input Voltage
CE Input Voltage
2
1
0
2
1
0
Output Voltage
Output Voltage
0
20
40
60
80
100
0
20
40
60
80
100
Time t (μs)
Time t (μs)
18
RP101x
NO.EA-167-160425
RP101x25xx
RP101x25xx
IOUT=0mA
IOUT=10mA
6
4
2
0
6
4
2
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
3
2
1
0
3
2
1
0
0
0
0
20
20
20
40
60
80
100
0
0
0
20
20
20
40
60
80
100
Time t (μs)
Time t (μs)
RP101x25xx
RP101x25xx
I
OUT=30mA
IOUT=150mA
6
4
2
0
6
4
2
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
3
2
1
0
3
2
1
0
40
60
80
100
40
60
80
100
Time t (μs)
Time t (μs)
RP101x33xx
RP101x33xx
IOUT=0mA
IOUT=150mA
6
4
2
0
6
4
2
0
CE Input Voltage
CE Input Voltage
4
2
0
4
2
0
Output Voltage
Output Voltage
40
60
80
100
40
60
80
100
Time t (μs)
Time t (μs)
19
RP101x
NO.EA-167-160425
13) Turn Off Speed with CE pin (D Version) (C11.0F, C21.0F, Topt25C)
RP101x12xD
RP101x12xD
IOUT=0mA
IOUT=10mA
3
2
1
0
3
2
1
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
2
1
0
2
1
0
0
0
0
50
50
50
100 150 200 250 300
0
0
0
50
100 150 200 250 300
Time t (μs)
Time t (μs)
RP101x12xD
RP101x12xD
IOUT=30mA
IOUT=150mA
3
2
1
0
3
2
1
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
2
1
0
2
1
0
100 150 200 250 300
20
40
60
80
100
Time t (μs)
Time t (μs)
RP101x25xD
RP101x25xD
IOUT=0mA
IOUT=10mA
4
2
0
4
2
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
3
2
3
2
1
0
1
0
100 150 200 250 300
50
100 150 200 250 300
Time t (μs)
Time t (μs)
20
RP101x
NO.EA-167-160425
RP101x25xD
RP101x25xD
IOUT=30mA
IOUT=150mA
4
2
0
4
2
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
0
3
2
3
2
1
0
1
0
0
0
0
50
50
50
100 150 200 250 300
0
0
0
50
100 150 200 250 300
Time t (μs)
Time t (μs)
RP101x33xD
RP101x33xD
IOUT=0mA
IOUT=10mA
6
4
2
0
6
4
2
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
4
2
0
4
2
0
100 150 200 250 300
50
100 150 200 250 300
Time t (μs)
Time t (μs)
RP101x33xD
RP101x33xD
IOUT=30mA
IOUT=150mA
6
4
2
0
6
4
2
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
4
2
0
4
2
0
100 150 200 250 300
20
40
60
80
100
Time t (μs)
Time t (μs)
21
RP101x
NO.EA-167-160425
14) Dropout Voltage vs. Temperature (C11.0F, C21.0F)
RP101x12xx
RP101x25xx
600
500
400
300
200
100
0
350
300
250
200
150
100
50
300mA
150mA
100mA
50mA
300mA
150mA
100mA
50mA
0
-40 -25
0
25
50
75 85
-40 -25
0
25
50
75 85
Temperature Topt (°C)
Temperature Topt (°C)
RP101x33xx
350
300
250
200
150
100
50
300mA
150mA
100mA
50mA
0
-40 -25
0
25
50
75 85
Temperature Topt (°C)
15) Output Voltage vs. Input Voltage (C11.0F, C21.0F)
3.2
3.0
2.8
2.6
I
I
I
I
I
OUT=0mA
OUT=10mA
OUT=50mA
OUT=100mA
OUT=150mA
2.4
2.2
2.0
2.7
2.8
2.9
3.0
3.1
3.2
Input Voltage VIN (V)
22
RP101x
NO.EA-167-160425
ESR vs. Output Current
When using these ICs, consider the following points:
The relations between IOUT (Output Current) and ESR of an output capacitor are shown below.
The conditions when the white noise level is under 40V (Avg.) are marked as the hatched area in the graph.
Measurement conditions
Frequency Band : 10Hz to 2MHz
Temperature
: 40C to 85C
RP101x12xx
RP101x12xx
Topt=-40°C
IN=1.7V to 5.5V C1=Ceramic 1.0μF
Topt=85°C
IN=1.7V to 5.5V C1=Ceramic 1.0μF
V
V
1000
100
10
1000
100
10
1
1
0.1
0.01
0.1
0.01
0
50
100 150 200 250 300
0
50
100 150 200 250 300
Output Current IOUT (mA)
Output Current IOUT (mA)
RP101x33xx
RP101x33xx
Topt=-40°C
IN=3.3V to 5.5V C1=Ceramic 1.0μF
Topt=85°C
IN=3.3V to 5.5V C1=Ceramic 1.0μF
V
V
1000
100
10
1000
100
10
1
1
0.1
0.01
0.1
0.01
0
50
100 150 200 250 300
0
50
100 150 200 250 300
Output Current IOUT (mA)
Output Current IOUT (mA)
23
RP101x
NO.EA-167-160425
PACKAGE INFORMATION
Power Dissipation (DFN(PLP)1612-4)
Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the
measurement at the condition below:
Measurement Conditions
Standard Test Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double sided)
40mm*40mm*1.6mm
Top side: Approx. 50%, Back side: Approx. 50%
0.54mm * 24pcs
Through-holes
Measurement Result
(Ta=25C)
Standard Test Land Pattern
610mW (Tjmax=125C)
762mW(Tjmax=150C)
ja = (125-25C)/0.61W= 164C/W
jc = 48C/W
Power Dissipation
Thermal Resistance
800
40
762
700
600
610
500
400
300
200
100
0
85
0
25
50
75
100
125
150
Ambient Temperature (°C)
Power Dissipation
Measurent Board Pattern
IC Mount Area Unit : mm
*The above graph shows the Power Dissipation of the package based on Tjmax=125C and Tjmax=150C.
Operating the IC in the shaded area in the graph might have an influence it's lifetime. Operating time must be
within the time limit described in the table below, in case of operating in the shaded area.
Estimated years
Operating Time
(Operating four hours/day)
13,000 hours
9years
24
RP101x
NO.EA-167-160425
Package Dimensions (DFN(PLP)1612-4)
1.00.1
0.6
1.2
B
A
3
4
X4
※
0.05
INDEX
2
1
0.30.1
0.05 M AB
(Unit : mm)
Bottom View
※) Tab is GND level. (They are connected to the
reverse side of this IC.)
0.05 S
S
The tab is better to be connected to the GND,
but leaving it open is also acceptable.
Mark Specification (DFN(PLP)1612-4)
: Product Code … Please refer to the RP101Kxx1x Series Mark Specification Table.
: Lot Number … Alphanumeric Serial Number
25
RP101x
NO.EA-167-160425
RP101Kxx1x Series Mark Specification Table
PKG: DFN(PLP)1612-4
RP101Kxx1B
RP101Kxx1D
Part Number
3A
3B
3C
3D
3E
3F
Vset
1.2V
1.3V
1.5V
1.8V
1.85V
1.9V
2.0V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.3V
2.1V
2.3V
2.4V
3.2V
2.2V
Part Number
RP101K121D
RP101K131D
RP101K151D
RP101K181D
RP101K181D5
RP101K191D
RP101K201D
RP101K251D
RP101K261D
RP101K271D
RP101K281D
RP101K281D5
RP101K291D
RP101K301D
RP101K311D
RP101K331D
RP101K211D
RP101K231D
RP101K241D
RP101K321D
RP101K221D
4A
4B
4C
4D
4E
4F
Vset
1.2V
1.3V
1.5V
1.8V
1.85V
1.9V
2.0V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.3V
2.1V
2.3V
2.4V
3.2V
2.2V
RP101K121B
RP101K131B
RP101K151B
RP101K181B
RP101K181B5
RP101K191B
RP101K201B
RP101K251B
RP101K261B
RP101K271B
RP101K281B
RP101K281B5
RP101K291B
RP101K301B
RP101K311B
RP101K331B
RP101K211B
RP101K231B
RP101K241B
RP101K321B
RP101K221B
3G
3H
3J
4G
4H
4J
3K
3L
4K
4L
3M
3N
3P
3Q
3R
3S
3T
4M
4N
4P
4Q
4R
4S
4T
3U
3V
3W
4U
4V
4W
26
RP101x
NO.EA-167-160425
Power Dissipation (DFN(PLP)1612-4B)
Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the
measurement at the condition below:
Measurement Conditions
Standard Test Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double sided)
40mm*40mm*1.6mm
Top side: Approx. 50%, Back side: Approx. 50%
0.54mm * 24pcs
Through-holes
Measurement Result
(Ta=25C)
Standard Test Land Pattern
580mW (Tjmax=125C)
725mW (Tjmax=150C)
Power Dissipation
ja = (125-25 C) / 0.58W= 172 C/W
Thermal Resistance
jc = 51 C/W
Power Dissipation
Measurent Board Pattern
40
800
700
600
500
400
300
200
100
0
725
580
85
0
25
50
75
100
125
150
Ambient Temperature (°C)
IC Mount Area Unit : mm
*The above graph shows the Power Dissipation of the package based on Tjmax=125C and Tjmax=150C.
Operating the IC in the shaded area in the graph might have an influence it's lifetime. Operating time must be
within the time limit described in the table below, in case of operating in the shaded area.
Estimated years
Operating Time
(Operating four hours/day)
13,000 hours
9years
27
RP101x
NO.EA-167-160425
Package Dimensions (DFN(PLP)1612-4B)
1.00.1
0.6
1.2
B
A
3
4
X4
※
0.05
INDEX
2
1
0.30.1
0.05 M AB
(Unit : mm)
Bottom View
※) Tab is GND level. (They are connected to the
reverse side of this IC.)
0.05 S
S
The tab is better to be connected to the GND,
but leaving it open is also acceptable.
Mark Specification (DFN(PLP)1612-4B)
: Product Code … Please refer to the RP101Kxx2x Series Mark Specification Table.
: Lot Number … Alphanumeric Serial Number
28
RP101x
NO.EA-167-160425
RP101Kxx2x Series Mark Specification Table
PKG: DFN(PLP)1612-4B
RP101Kxx2B
RP101Kxx2D
Part Number
5A
5B
5C
5D
5E
5F
Vset
1.2V
1.3V
1.5V
1.8V
1.85V
1.9V
2.0V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.3V
2.1V
2.3V
2.4V
3.2V
2.2V
Part Number
RP101K122D
RP101K132D
RP101K152D
RP101K182D
RP101K182D5
RP101K1921D
RP101K202D
RP101K252D
RP101K262D
RP101K272D
RP101K282D
RP101K282D5
RP101K292D
RP101K302D
RP101K312D
RP101K332D
RP101K212D
RP101K232D
RP101K242D
RP101K322D
RP101K222D
6A
6B
6C
6D
6E
6F
Vset
1.2V
1.3V
1.5V
1.8V
1.85V
1.9V
2.0V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.3V
2.1V
2.3V
2.4V
3.2V
2.2V
RP101K122B
RP101K132B
RP101K152B
RP101K182B
RP101K182B5
RP101K192B
RP101K202B
RP101K252B
RP101K262B
RP101K272B
RP101K282B
RP101K282B5
RP101K292B
RP101K302B
RP101K312B
RP101K332B
RP101K212B
RP101K232B
RP101K242B
RP101K322B
RP101K222B
5G
5H
5J
6G
6H
6J
5K
5L
6K
6L
5M
5N
5P
5Q
5R
5S
5T
6M
6N
6P
6Q
6R
6S
6T
5U
5V
5W
6U
6V
6W
29
RP101x
NO.EA-167-160425
Power Dissipation (SOT-23-5)
Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the
measurement at the condition below:
(Power Dissipation (SOT-23-5) is substitution of SOT-23-6.)
Measurement Conditions
Standard Test Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double sided)
40mm*40mm*1.6mm
Top side: Approx. 50%, Back side: Approx. 50%
0.5mm * 44pcs
Through-holes
Measurement Result
(Ta=25C)
Standard Test Land Pattern
420mW(Tjmax=125C)
525mW(Tjmax=150C)
ja = (125-25C)/0.42W= 238C/W
Free Air
Power Dissipation
250mW(Tjmax=125C)
400C/W
Thermal Resistance
600
525
40
On Board
Free Air
500
400
300
200
100
420
250
0
0
25
50
75
100
125
150
85
Measurement Board Pattern
Ambient Temperature (C)
IC Mount Area (Unit: mm)
Power Dissipation
*The above graph shows the Power Dissipation of the package based on Tjmax=125C and Tjmax=150C.
Operating the IC in the shaded area in the graph might have an influence it's lifetime. Operating time must be
within the time limit described in the table below, in case of operating in the shaded area.
Estimated years
Operating Time
(Operating four hours/day)
9,000 hours
6years
30
RP101x
NO.EA-167-160425
Package Dimensions (SOT-23-5)
2.9±0.2
1.1±0.1
0.8±0.1
1.9±0.2
(0.95) (0.95)
5
4
0~0.1
1
2
3
+0.1
0.15-0.05
0.4±0.1
Unit : mm
Mark Specification (SOT-23-5)
: Product Code … Please refer to the RP101N Series Mark Specification Table.
: Lot Number … Alphanumeric Serial Number
5
4
1
2
3
31
RP101x
NO.EA-167-160425
RP101N Series Mark Specification Table
PKG: SOT-23-5
RP101NxxxB
Part Number
RP101NxxxD
70A
70B
70C
70D
70E
70F
70G
70H
70J
Vset
1.2V
1.3V
1.5V
1.8V
1.85V
1.9V
2.0V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.3V
2.1V
2.3V
2.4V
3.2V
2.2V
Part Number
71A
71B
71C
71D
71E
71F
71G
71H
71J
Vset
1.2V
1.3V
1.5V
1.8V
1.85V
1.9V
2.0V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.3V
2.1V
2.3V
2.4V
3.2V
2.2V
RP101N121B
RP101N131B
RP101N151B
RP101N181B
RP101N181B5
RP101N191B
RP101N201B
RP101N251B
RP101N261B
RP101N271B
RP101N281B
RP101N281B5
RP101N291B
RP101N301B
RP101N311B
RP101N331B
RP101N211B
RP101N231B
RP101N241B
RP101N321B
RP101N221B
RP101N121D
RP101N131D
RP101N151D
RP101N181D
RP101N181D5
RP101N191D
RP101N201D
RP101N251D
RP101N261D
RP101N271D
RP101N281D
RP101N281D5
RP101N291D
RP101N301D
RP101N311D
RP101N331D
RP101N211D
RP101N231D
RP101N241D
RP101N321D
RP101N221D
70K
70L
70M
70N
70P
70Q
70R
70S
70T
70U
70V
70W
71K
71L
71M
71N
71P
71Q
71R
71S
71T
71U
71V
71W
32
1.The products and the product specifications described in this document are subject to change or
discontinuation of production without notice for reasons such as improvement. Therefore, before deciding
to use the products, please refer to Ricoh sales representatives for the latest information thereon.
2.The materials in this document may not be copied or otherwise reproduced in whole or in part without
prior written consent of Ricoh.
3.Please be sure to take any necessary formalities under relevant laws or regulations before exporting or
otherwise taking out of your country the products or the technical information described herein.
4.The technical information described in this document shows typical characteristics of and example
application circuits for the products. The release of such information is not to be construed as a warranty
of or a grant of license under Ricoh's or any third party's intellectual property rights or any other rights.
5.The products listed in this document are intended and designed for use as general electronic
components in standard applications (office equipment, telecommunication equipment, measuring
instruments, consumer electronic products, amusement equipment etc.). Those customers intending to
use a product in an application requiring extreme quality and reliability, for example, in a highly specific
application where the failure or misoperation of the product could result in human injury or death
(aircraft, spacevehicle, nuclear reactor control system, traffic control system, automotive and
transportation equipment, combustion equipment, safety devices, life support system etc.) should first
contact us.
6.We are making our continuous effort to improve the quality and reliability of our products, but
semiconductor products are likely to fail with certain probability. In order to prevent any injury to
persons or damages to property resulting from such failure, customers should be careful enough to
incorporate safety measures in their design, such as redundancy feature, fire containment feature and
fail-safe feature. We do not assume any liability or responsibility for any loss or damage arising from
misuse or inappropriate use of the products.
7.Anti-radiation design is not implemented in the products described in this document.
8.Please contact Ricoh sales representatives should you have any questions or comments concerning
the products or the technical information.
Ricoh is committed to reducing the environmental loading materials in electrical devices
with a view to contributing to the protection of human health and the environment.
Ricoh has been providing RoHS compliant products since April 1, 2006 and Halogen-free products since
Halogen Free
April 1, 2012.
http://www.e-devices.ricoh.co.jp/en/
Sales & Support Offices
RICOH ELECTRONIC DEVICES CO., LTD.
Higashi-Shinagawa Office (International Sales)
3-32-3, Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-8655, Japan
Phone: +81-3-5479-2857 Fax: +81-3-5479-0502
RICOH EUROPE (NETHERLANDS) B.V.
Semiconductor Support Centre
Prof. W.H. Keesomlaan 1, 1183 DJ Amstelveen, The Netherlands
Phone: +31-20-5474-309
RICOH INTERNATIONAL B.V. - German Branch
Semiconductor Sales and Support Centre
Oberrather Strasse 6, 40472 Düsseldorf, Germany
Phone: +49-211-6546-0
RICOH ELECTRONIC DEVICES KOREA CO., LTD.
3F, Haesung Bldg, 504, Teheran-ro, Gangnam-gu, Seoul, 135-725, Korea
Phone: +82-2-2135-5700 Fax: +82-2-2051-5713
RICOH ELECTRONIC DEVICES SHANGHAI CO., LTD.
Room 403, No.2 Building, No.690 Bibo Road, Pu Dong New District, Shanghai 201203,
People's Republic of China
Phone: +86-21-5027-3200 Fax: +86-21-5027-3299
RICOH ELECTRONIC DEVICES CO., LTD.
Taipei office
Room 109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)
Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623
相关型号:
RP101K121D-TR
Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, 0.60 MM, ROHS COMPLIANT, PLP-4
RICOH
RP101K122B-TR
Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, 0.40 MM, ROHS COMPLIANT, PLP-4
RICOH
RP101K122D-TR
Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, 0.40 MM, ROHS COMPLIANT, PLP-4
RICOH
RP101K131B-TR
Fixed Positive LDO Regulator, 1.3V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, 0.60 MM, ROHS COMPLIANT, PLP-4
RICOH
RP101K131D-TR
Fixed Positive LDO Regulator, 1.3V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, 0.60 MM, ROHS COMPLIANT, PLP-4
RICOH
RP101K132B-TR
Fixed Positive LDO Regulator, 1.3V, 0.5V Dropout, CMOS, 1.60 X 1.20 MM, 0.40 MM, ROHS COMPLIANT, PLP-4
RICOH
©2020 ICPDF网 联系我们和版权申明