RP131J471D-T1-F [RICOH]

Fixed Positive LDO Regulator, 4.7V, CMOS, PSSO5, ROHS COMPLIANT, TO-252, 5 PIN;
RP131J471D-T1-F
型号: RP131J471D-T1-F
厂家: RICOH ELECTRONICS DEVICES DIVISION    RICOH ELECTRONICS DEVICES DIVISION
描述:

Fixed Positive LDO Regulator, 4.7V, CMOS, PSSO5, ROHS COMPLIANT, TO-252, 5 PIN

文件: 总2页 (文件大小:145K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
RP131x Series  
1A LDO  
The RP131x Series are CMOS-based LDO regulators featuring 1A output with low on-resistance. The CMOS process provides both  
large output current and low supply current. The dropout voltage is significantly lower than bipolar regulators. The RP131x handles  
low voltage with an input voltage from 1.6V and an output voltage from 0.8V. Accordingly, the device supports highly integrated, low  
voltage-driven LSI as a rear stage of the DC/DC converter. The CE pin can switch the regulator into standby mode. In addition to a  
fold-back protection circuit built into conventional LDO regulators, RP131x has a thermal shutdown circuit and inrush current limit  
circuit. Ceramic capacitors can be used.  
FEATURES  
Supply Current (ISS) ························Typ. 65μA (VIN=6.5V)  
Line Regulation·······························Typ. 0.05%/V  
Fold-back Protection Circuit············Current limit Typ. 250mA  
Inrush Current Limit Circuit·············Typ. 500mA  
Thermal Shutdown Circuit ··············Stops at 165°C.  
Packages········································DFN (PLP)1820-6,  
SOT-89-5, HSOP-6J  
Standby Current (Istandby) ·················Typ. 0.15μA (Same as above, CE=“L”)  
Dropout Voltage (VDIF) ····················Typ. 0.5V (IOUT=1A, VOUT=2.8V)  
<
Ripple Rejection (RR)·····················Typ. 70dB (f=1kHz, VOUT 3.3V),  
=
Typ. 60dB (f=1kHz, VOUT>3.3V)  
Input Voltage Range (VIN)···············1.6V to 6.5V  
Output Voltage Range (VOUT)··········0.8V to 5.0V (internally fixed)  
Output Voltage Accuracy ················± 1%  
TO-252-5-P2  
Ceramic capacitors can be used. ···2.2μF or more (VOUT 3.6V)  
=
>
4.7μF or more (VOUT 3.6V)  
Temp. coeff. of Output Voltage ·······Typ. ± 100ppm/°C  
(The above shows specification at Topt=25 C. Design assurance value at -40 C Topt 85 C is also available. For details, please refer to the datasheet.)  
°
°
°
=
=
BLOCK DIAGRAMS  
R131xxx1B  
(Without Auto-Discharge function)  
R131xxx1D  
(With Auto-Discharge function)  
V
DD  
V
DD  
V
OUT  
V
OUT  
Vref  
Vref  
Current Limit  
Current Limit  
Thermal Shutdown  
Thermal Shutdown  
CE  
GND  
CE  
GND  
SELECTION GUIDES  
.
xx  
.
: Specify the output voltage within the range 0.8V(  
in 0.1V steps.  
.
08  
.
) to 5.0V(  
.
50  
.
)
Package  
DFN(PLP)1820-6  
SOT-89-5  
HSOP-6J  
TO-252-5-P2  
Quantity per Reel  
Part No.  
5,000 pcs  
1,000 pcs  
1,000 pcs  
3,000 pcs  
RP131K  
.
xx  
.
1
.
-TR  
: Select from (  
.
B
.
) without auto-discharge function or  
.
RP131H  
.
xx  
.
1
.
-T1-F  
(.  
D
.
) with auto-discharge function.  
RP131S  
.
xx  
.
1
.
-E2-F  
RP131J  
.
xx  
.
1
.
-T1-F  
PACKAGES (Top View)  
TYPICAL CHARACTERISTIC  
RP131x331x Dropout Voltage vs. Output Current  
DFN  
(
PLP  
)
1820-6  
SOT-89-5  
HSOP-6J  
TO-252-5-P2  
6
5
4
6
5
4
5
4
1.4  
85°C  
1.2  
25°C  
1.0  
-40°C  
0.8  
0.6  
0.4  
0.2  
0
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
1
1
2
3
4
5
6
1
NC  
GND  
CE  
VDD  
VOUT  
1 VOUT  
2
3 NC  
4 CE  
5
1 VOUT  
2
3
4 CE  
5 VDD  
VOUT  
VOUT  
GND  
CE  
VDD  
VDD  
1
1
1
GND∗  
GND∗  
GND∗  
2
3
4
5
1
1
GND∗  
0
100 200 300 400 500 600 700 800 9001000  
Output Current IOUT (mA)  
1
6 VDD  
) The tab is substrate level (GND).  
1) The VOUT pin, VDD pin and GND pin must be wired each other when it is mounted on board.  
APPLICATIONS  
Power source for hand-held communication equipment, cameras, and VCRs Power source for laptop personal computers and home appliances  
Power source for battery-powered equipment  
No.EK-174-091101  
CMOS LDO Regulator  
1.The products and the product specifications described in this document are subject to change or  
discontinuation of production without notice for reasons such as improvement. Therefore, before  
deciding to use the products, please refer to Ricoh sales representatives for the latest  
information thereon.  
2.The materials in this document may not be copied or otherwise reproduced in whole or in part  
without prior written consent of Ricoh.  
3.Please be sure to take any necessary formalities under relevant laws or regulations before  
exporting or otherwise taking out of your country the products or the technical information  
described herein.  
4.The technical information described in this document shows typical characteristics of and  
example application circuits for the products. The release of such information is not to be  
construed as a warranty of or a grant of license under Ricoh's or any third party's intellectual  
property rights or any other rights.  
5.The products listed in this document are intended and designed for use as general electronic  
components in standard applications (office equipment, telecommunication equipment,  
measuring instruments, consumer electronic products, amusement equipment etc.). Those  
customers intending to use a product in an application requiring extreme quality and reliability,  
for example, in a highly specific application where the failure or misoperation of the product  
could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system,  
traffic control system, automotive and transportation equipment, combustion equipment, safety  
devices, life support system etc.) should first contact us.  
6.We are making our continuous effort to improve the quality and reliability of our products, but  
semiconductor products are likely to fail with certain probability. In order to prevent any injury to  
persons or damages to property resulting from such failure, customers should be careful enough  
to incorporate safety measures in their design, such as redundancy feature, firecontainment  
feature and fail-safe feature. We do not assume any liability or responsibility for any loss or  
damage arising from misuse or inappropriate use of the products.  
7.Anti-radiation design is not implemented in the products described in this document.  
8.Please contact Ricoh sales representatives should you have any questions or comments  
concerning the products or the technical information.  
RICOH COMPANY., LTD. Electronic Devices Company  
Ricoh awarded ISO 14001 certification.  
Ricoh presented with the Japan Management Quality Award for 1999.  
The Ricoh Group was awarded ISO 14001 certification, which is an international standard for  
environmental management systems, at both its domestic and overseas production facilities.  
Our current aim is to obtain ISO 14001 certification for all of our business offices.  
Ricoh continually strives to promote customer satisfaction, and shares the achievements  
of its management quality improvement program with people and society.  
Ricoh completed the organization of the Lead-free production for all of our products.  
After Apr. 1, 2006, we will ship out the lead free products only. Thus, all products that  
will be shipped from now on comply with RoHS Directive.  
http://www.ricoh.com/LSI/  
RICOH COMPANY, LTD.  
Electronic Devices Company  
● Shin-Yokohama office (International Sales)  
3-2-3, Shin-Yokohama, Kohoku-ku, Yokohama City, Kanagawa 222-8530, Japan  
Phone: +81-45-477-1697 Fax: +81-45-477-1698  
RICOH EUROPE (NETHERLANDS) B.V.  
● Semiconductor Support Centre  
Prof. W.H.Keesomlaan 1, 1183 DL Amstelveen, The Netherlands  
P.O.Box 114, 1180 AC Amstelveen  
Phone: +31-20-5474-309 Fax: +31-20-5474-791  
RICOH ELECTRONIC DEVICES KOREA Co., Ltd.  
11 floor, Haesung 1 building, 942, Daechidong, Gangnamgu, Seoul, Korea  
Phone: +82-2-2135-5700 Fax: +82-2-2135-5705  
RICOH ELECTRONIC DEVICES SHANGHAI Co., Ltd.  
Room403, No.2 Building, 690#Bi Bo Road, Pu Dong New district, Shanghai 201203,  
People's Republic of China  
Phone: +86-21-5027-3200 Fax: +86-21-5027-3299  
RICOH COMPANY, LTD.  
Electronic Devices Company  
● Taipei office  
Room109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)  
Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623  

相关型号:

RP131J491B-T1-F

Fixed Positive LDO Regulator, 4.9V, CMOS, PSSO5, ROHS COMPLIANT, TO-252, 5 PIN
RICOH

RP131J501B-T1-F

Fixed Positive LDO Regulator, 5V, CMOS, PSSO5, ROHS COMPLIANT, TO-252, 5 PIN
RICOH

RP131J501B-T1-FE

Output Current Min. 1A
RICOH

RP131J501D-T1-FE

Output Current Min. 1A
RICOH

RP131J531B-T1-FE

Output Current Min. 1A
RICOH

RP131J531D-T1-FE

Output Current Min. 1A
RICOH

RP131J551B-T1-FE

Output Current Min. 1A
RICOH

RP131J551D-T1-FE

Output Current Min. 1A
RICOH

RP131K081B-TR

Fixed Positive LDO Regulator, 0.8V, 1.65V Dropout, CMOS, PDSO6, 1.80 X 2 MM, DFN-6
RICOH

RP131K081D-TR

Output Current Min. 1A
RICOH

RP131K101B-TR

Fixed Positive LDO Regulator, 1V, 1.45V Dropout, CMOS, PDSO6, 1.80 X 2 MM, DFN-6
RICOH

RP131K101D-TR

Fixed Positive LDO Regulator, 1V, 1.45V Dropout, CMOS, PDSO6, 1.80 X 2 MM, DFN-6
RICOH