RP131K531D-TR [RICOH]
Output Current Min. 1A;型号: | RP131K531D-TR |
厂家: | RICOH ELECTRONICS DEVICES DIVISION |
描述: | Output Current Min. 1A |
文件: | 总36页 (文件大小:779K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RP131x SERIES
LOW ON RESISTANCE / LOW VOLTAGE 1A LDO
NO.EA-174-160426
OUTLINE
The RP131x Series are voltage-regulators with a built-in low ON-resistance transistor and output current is 1A
capability. These ICs are capable of the low input voltage (Min.1.6V) and also the minimum output voltage can be
set from 0.8V. (The output voltage is fixed in the IC.)
Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor net for setting output voltage,
a chip enable circuit, current limit circuits for over-current and short, and a thermal-shutdown circuit.
A standby mode with ultra low supply current can be realized with the chip enable function.
The packages for these ICs are DFN1616-6B and DFN(PLP)1820-6 which are suitable for high density mounting
of the ICs on boards. SOT-89-5, HSOP-6J and TO-252-5-P2 with high power dissipation are also available.
FEATURES
• Output Current ............................................................ Min. 1A
• Supply Current ............................................................. Typ. 65μA
• Standby Current ......................................................... Typ. 0.15μA
• Input Voltage Range ................................................... 1.6V to 6.5V
• Output Voltage Range.................................................. 0.8V to 5.5V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
• Dropout Voltage............................................................ Typ. 0.5V (VOUT=2.8V, IOUT=1A)
• Ripple Rejection ........................................................... Typ. 70dB (f=1kHz, VOUT=2.8V)
• Output Voltage Accuracy.............................................. ±1.0%
• Temperature-Drift Coefficient of Output Voltage .......... Typ. ±100ppm/°C
• Line Regulation ............................................................ Typ. 0.05%/V
• Load Regulation ......................................................... Typ. 20mV at IOUT=300mA, Typ. 80mV at IOUT=1A
•
Packages ............................................................... DFN1616-6B, DFN(PLP)1820-6, SOT-89-5, HSOP-6J,
TO-252-5-P2
• Built-in Inrush current limit circuit ............................... Typ. 500mA
• Built-in Fold-Back Protection Circuit ........................... Typ. 250mA (Current at short mode)
• Built-in Thermal Shutdown Circuit .............................. Thermal Shutdown Temperature ; Typ. 165°C
Released Temperature ; Typ. 135°C
• Built-in Auto Discharge Function ................................ D version
• Ceramic capacitors are recommended to be used with this IC .... 2.2μF or more (VOUT≤3.6V)
4.7μF or more (VOUT>3.6V)
APPLICATIONS
• Power source for battery-powered equipment.
• Power source for portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for Notebook PC.
• Power source for home appliances.
1
RP131x
NO.EA-174-160426
BLOCK DIAGRAMS
RP131xxx1B
RP131xxx1D
V
DD
V
DD
VOUT
V
OUT
Vref
Vref
Current Limit
Thermal Shutdown
Current Limit
Thermal Shutdown
CE
CE
GND
GND
SELECTION GUIDE
The output voltage, auto discharge function, package for the ICs can be selected at the user’s request.
Product Name
RP131Lxx1∗-TR
Package
DFN1616-6B
DFN(PLP)1820-6
SOT-89-5
Quantity per Reel
5,000 pcs
Pb Free
Yes
Halogen Free
Yes
Yes
Yes
Yes
Yes
5,000 pcs
Yes
RP131Kxx1∗-TR
1,000 pcs
Yes
RP131Hxx1∗-T1-FE
RP131Sxx1∗-E2-FE
RP131Jxx1∗-T1-FE
HSOP-6J
1,000 pcs
Yes
TO-252-5-P2
3,000 pcs
Yes
xx : The output voltage can be designated in the range from 0.8V(08) to 5.5V(55) in 0.1V steps.
(For other voltages, please refer to MARK INFORMATIONS.)
∗ : The auto discharge function at off state are options as follows.
(B) without auto discharge function at off state
(D) with auto discharge function at off state
2
RP131x
NO.EA-174-160426
PIN CONFIGURATIONS
• DFN1616-6B
• DFN(PLP)1820-6
Top View Bottom View
Top View
Bottom View
6
5
4
4
5
6
6
5
4
4
5
6
∗1
∗1
1
2
3
3
2
1
1
2
3
3
2
1
z SOT-89-5
z HSOP-6J
z TO-252-5-P2
5
4
6
5
4
1
2
3
1
2
3
1
2
3
4
5
PIN DESCRIPTIONS
• DFN1616-6B
Pin No.
Symbol
Pin Description
Output Pin∗2
1
2
3
4
5
6
VOUT
VOUT
GND
CE
Output Pin∗2
Ground Pin
Chip Enable Pin ("H" Active)
Input Pin∗2
VDD
Input Pin∗2
VDD
∗1) Tab is GND level. (They are connected to the reverse side of this IC.)
The tab is better to be connected to the GND, but leaving it open is also acceptable.
∗2) When you use this IC, please make sure be wired with 1pin with 2pin and 5pin with 6pin.
3
RP131x
NO.EA-174-160426
• DFN(PLP)1820-6
Pin No.
Symbol
VOUT
VOUT
GND
CE
Pin Description
Output Pin∗2
1
2
3
4
5
6
Output Pin∗2
Ground Pin
Chip Enable Pin ("H" Active)
Input Pin∗2
VDD
Input Pin∗2
VDD
∗1) Tab is GND level. (They are connected to the reverse side of this IC.)
The tab is better to be connected to the GND, but leaving it open is also acceptable.
∗2) When you use this IC, please make sure be wired with 1pin with 2pin and 5pin with 6pin.
• SOT-89-5
Pin No.
Symbol
NC
Pin Description
1
2
3
4
5
No Connection
Ground Pin
GND
CE
Chip Enable Pin ("H" Active)
Input Pin
VDD
VOUT
Output Pin
• HSOP-6J
Pin No.
Symbol
VOUT
GND
NC
Pin Description
1
2
3
4
5
6
Output Pin
Ground Pin∗3
No Connection
CE
Chip Enable Pin ("H" Active)
Ground Pin∗3
Input Pin
GND
VDD
∗3) When you use this IC, please make sure be wired with 2pin and 5pin.
• TO-252-5-P2
Pin No.
Symbol
Pin Description
1
2
3
4
5
VOUT
Output Pin
Ground Pin∗4
Ground Pin∗4
GND
GND
CE
Chip Enable Pin ("H" Active)
Input Pin
VDD
∗4) When you use this IC, please make sure be wired with 2pin and 3pin.
4
RP131x
NO.EA-174-160426
ABSOLUTE MAXIMUM RATINGS
Symbol
Item
Rating
7.0
Unit
V
VIN
Input Voltage
VCE
Input Voltage (CE Pin)
Output Voltage
V
−0.3 to 7.0
−0.3 to VIN+0.3
640
VOUT
V
Power Dissipation (DFN1616-6B)∗
Power Dissipation (DFN(PLP)1820-6)∗
Power Dissipation (SOT-89-5)∗
Power Dissipation (HSOP-6J)∗
Power Dissipation (TO-252-5-P2)∗
Operating Temperature Range
880
PD
900
mW
1700
1900
Topt
Tstg
−40 to 85
−55 to 125
°C
°C
Storage Temperature Range
∗) For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field.
The functional operation at or over these absolute maximum ratings is not assured.
5
RP131x
NO.EA-174-160426
ELECTRICAL CHARACTERISTICS
VIN=Set VOUT+1V, IOUT=1mA
The specification in
is checked and guaranteed by design engineering at −40°C≤Topt≤85°C, unless
otherwise noted.
=
°
• RP131xxx1B/D
Topt 25 C
Symbol
Item
Conditions
Min.
×0.99
−15
Typ.
Max. Unit
VOUT>1.5V
VOUT≤1.5V
VOUT>1.5V
V
mV
V
×1.01
Topt=25°C
15
VOUT
Output Voltage
×0.974
×1.018
27
−40°C≤Topt≤85°C
VOUT≤1.5V
mV
−40
0.1mA≤IOUT≤300mA
0.1mA≤IOUT≤1A
20
80
40
ΔVOUT/
ΔIOUT
Load Regulation
mV
120
VDIF
ISS
Dropout Voltage
Supply Current
Refer to the following table
65
90
IOUT=0mA (VIN=6.5V)
VCE=0V, VIN=6.5V
μA
μA
Istandby Standby Current
0.15
0.60
ΔVOUT/
Set VOUT+0.5V≤VIN≤6.5V
∗However, VIN ≥1.6V
Line Regulation
ΔVIN
0.05
70
0.1
%/V
VOUT≤3.3V
f=1kHz
RR
Ripple Rejection
Ripple 0.2Vp-p
IOUT=100mA
dB
V
VOUT>3.3V
60
VIN
Input Voltage
1.6
1
6.5
ppm
/°C
ΔVOUT/ Output Voltage
ΔTopt
−40°C≤Topt≤85°C
VOUT=0V
±100
Temperature Coefficient
ILIM
Output Current Limit
Short Current Limit
CE Pull-down Current
CE Input Voltage "H"
CE Input Voltage "L"
Output Noise
A
mA
μA
ISC
IPD
250
0.3
VCEH
VCEL
en
1.0
V
0.4
V
45
BW=10Hz to 100kHz, IOUT=1mA
μVrms
Thermal Shutdown
Temperature
TTSD
TTSR
RLOW
Junction Temperature
165
°C
°C
Ω
Thermal Shutdown
Released Temperature
Junction Temperature
135
30
Low Output Nch Tr. ON
Resistance (of D version)
VIN=4.0V, VCE=0V
The specification in
otherwise noted.
is checked and guaranteed by design engineering at −40°C≤Topt≤85°C, unless
All of unit are tested and specified under load conditions such that Tj≈Topt=25°C except for Output Noise, Ripple
Rejection, Output Voltage Temperature Coefficient, Dropout Voltage at 1A Output Current and Thermal
Shutdown items.
6
RP131x
NO.EA-174-160426
• Dropout Voltage by Output Voltage
Topt=25°C
Dropout Voltage VDIF (V)
Output Voltage
VOUT (V)
Condition
Typ.
0.600
0.550
0.450
0.340
0.290
0.230
0.150
0.140
Max.
0.780
0.690
0.610
0.540
0.500
0.310
0.180
0.170
Condition
Typ.
Max.
1.650
1.500
1.450
1.420
1.380
1.100
0.750
0.650
1.100
1.050
1.000
0.930
0.900
0.700
0.500
0.450
0.8 ≤ VOUT < 0.9
0.9 ≤ VOUT < 1.0
1.0 ≤ VOUT < 1.1
1.1 ≤ VOUT < 1.2
IOUT=300mA
IOUT=1A
1.2 ≤ VOUT < 1.5
1.5 ≤ VOUT < 2.6
2.6 ≤ VOUT < 3.3
3.3 ≤ VOUT ≤ 5.5
The specification in
otherwise noted.
is checked and guaranteed by design engineering at −40°C≤Topt≤85°C, unless
All of unit are tested and specified under load conditions such that Tj≈Topt=25°C except for Output Noise, Ripple
Rejection, Output Voltage Temperature Coefficient, Dropout Voltage at 1A Output Current and Thermal
Shutdown items.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge.
And the semiconductor devices may receive serious damage when they continue to operate over the
recommended operating conditions.
7
RP131x
NO.EA-174-160426
TYPICAL APPLICATION
VOUT
VDD
VOUT
RP131x
Series
C1
C2
CE GND
Recommendation value of the external capacitors
VOUT
Capacitors
C1
C2
C1
C2
Kyocera 2.2μF (size:1005) [CM05X5R225M06AB]
Kyocera 2.2μF (size:1608) [CM105X5R225K06AB]
Kyocera 2.2μF (size:1608) [CM105X5R225K06AB]
Kyocera 4.7μF (size:1608) [CM105X5R475M06AB]
VOUT ≤ 3.6V
VOUT > 3.6V
TECHNICAL NOTES
When using these ICs, consider the following points:
Phase Compensation
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, use a capacitor C2 with good frequency characteristics and ESR (Equivalent Series Resistance).
If a tantalum capacitor is used, and its ESR of C2 is large, the loop oscillation may result. Because of this, select
C2 carefully considering its frequency characteristics.
PCB Layout
Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.
Connect a capacitor C1 between VDD and GND pin with a capacitance value as "Recommendation value of the
external capacitors" above or more, and as close as possible to the pins.
Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring
as short as possible.
8
RP131x
NO.EA-174-160426
TEST CIRCUITS
VDD
VOUT
RP131x
Series
V
C1
C2
IOUT
VOUT
CE
GND
Basic Test Circuit
VOUT
VDD
VOUT
RP131x
Series
A
C1
C2
I
SS
CE GND
Test Circuit for Supply Current
Pulse
Generator
VDD
VOUT
RP131x
Series
C2
IOUT
P.G.
CE GND
Test Circuit for Ripple Rejection
VOUT
VDD
VOUT
RP131x
Series
C1
C2
CE
GND
IOUTa
IOUTb
Test Circuit for Load Transient Response
9
RP131x
NO.EA-174-160426
TYPICAL CHARACTERISTICS
1) Output Voltage vs. Output Current (Topt=25°C)
RP131x081x
RP131x151x
0.9
0.8
0.7
0.6
0.5
0.4
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
V
V
V
IN=2.0V
IN=2.5V
IN=3.5V
VIN=1.4V
VIN=1.6V
VIN=2.0V
VIN=2.5V
VIN=2.8V
0.3
0.2
0.1
0
0
0.5
1.0
1.5
2.0
0
0.5
1.0
1.5
2.0
Output Current IOUT (A)
Output Current IOUT (A)
RP131x331x
RP131x501x
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
V
V
V
IN=3.6V
IN=4.3V
IN=5.0V
V
IN=5.3V
VIN=6.0V
0
0.5
1.0
1.5
2.0
0
0.5
1.0
1.5
2.0
Output Current IOUT (A)
Output Current IOUT (A)
2) Output Voltage vs. Input Voltage (Topt=25°C)
RP131x081x
RP131x151x
1.0
0.9
0.8
0.7
0.6
0.5
0.4
1.8
1.5
1.2
0.9
0.6
0.3
0
I
I
I
I
OUT=1mA
I
I
I
I
OUT=1mA
0.3
0.2
0.1
0
OUT=50mA
OUT=100mA
OUT=300mA
OUT=50mA
OUT=100mA
OUT=300mA
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN (V)
Input Voltage VIN (V)
10
RP131x
NO.EA-174-160426
RP131x331x
RP131x501x
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
6
5
4
3
2
1
0
I
I
I
I
OUT=1mA
I
I
I
I
OUT=1mA
OUT=50mA
OUT=100mA
OUT=300mA
OUT=50mA
OUT=100mA
OUT=300mA
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN (V)
Input Voltage VIN (V)
3) Supply Current vs. Input Voltage (Topt=25°C)
RP131x081x
RP131x151x
70
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN (V)
Input Voltage VIN (V)
RP131x331x
RP131x501x
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN (V)
Input Voltage VIN (V)
11
RP131x
NO.EA-174-160426
4) Output Voltage vs. Temperature
RP131x081x
RP131x281x
0.83
1.53
1.52
1.51
1.50
1.49
1.48
1.47
1.46
0.82
0.81
0.80
0.79
0.78
0.77
0.76
-40 -25
0
25
50
75 85
-40 -25
0
25
50
75 85
Temperature Topt (°C)
Temperature Topt (°C)
RP131x331x
RP131x501x
3.36
5.06
5.04
5.02
5.00
4.98
4.96
4.94
4.92
4.90
3.34
3.32
3.30
3.28
3.26
3.24
3.22
3.20
-40 -25
0
25
50
75 85
-40 -25
0
25
50
75 85
Temperature Topt (°C)
Temperature Topt (°C)
5) Supply Current vs. Temperature
RP131x081x
RP131x151x
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
-40 -25
0
25
50
75 85
-40 -25
0
25
50
75 85
Temperature Topt (°C)
Temperature Topt (°C)
12
RP131x
NO.EA-174-160426
RP131x331x
RP131x501x
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
-40 -25
0
25
50
75 85
-40 -25
0
25
50
75 85
Temperature Topt (°C)
Temperature Topt (°C)
6) Dropout Voltage vs. Output Current
RP131x081x
RP131x151x
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1.4
85°C
85°C
25°C
-40°C
25°C
1.2
-40°C
1.0
0.8
0.6
0.4
0.2
0
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
RP131x331x
RP131x501x
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
85°C
25°C
-40°C
85°C
25°C
-40°C
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
13
RP131x
NO.EA-174-160426
7) Dropout Voltage vs. Set Output Voltage
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
I
I
I
I
I
I
I
I
I
I
OUT=1A
OUT=800mA
OUT=600mA
OUT=400mA
OUT=200mA
OUT=100mA
OUT=50mA
OUT=10mA
OUT=1mA
OUT=0mA
0.5
1.5
2.5
3.5
4.5
5.5
Set Output Voltage VREG (V)
8) Ripple Rejection vs. Input Bias Voltage (C1
=
none, C2
=
Ceramic 1.0
μ
F, Ripple=0.2Vp-p, Topt=25°C)
RP131x331x
RP131x331x
IOUT=1mA
IOUT=30mA
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
f=0.2kHz
f=1kHz
f=10kHz
f=100kHz
f=0.2kHz
f=1kHz
f=10kHz
f=100kHz
3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
Input Voltage VIN (V)
Input Voltage VIN (V)
RP131x331x
RP131x501x
IOUT=50mA
IOUT=1mA
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
f=0.2kHz
f=1kHz
f=10kHz
f=100kHz
f=0.2kHz
f=1kHz
f=10kHz
f=100kHz
3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
4.5
5.0
5.5
6.0
6.5
Input Voltage VIN (V)
Input Voltage VIN (V)
14
RP131x
NO.EA-174-160426
RP131x501x
RP131x501x
IOUT=10mA
IOUT=100mA
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
f=0.2kHz
f=1kHz
f=10kHz
f=100kHz
f=0.2kHz
f=1kHz
f=10kHz
f=100kHz
4.5
5.0
5.5
6.0
6.5
4.5
5.0
5.5
6.0
6.5
Input Voltage VIN (V)
Input Voltage VIN (V)
9) Ripple Rejection vs. Frequency (C1=none, C2=Ceramic 4.7μF, Topt=25°C)
RP131x081x RP131x151x
VIN=1.8VDC+0.2Vp-p
VIN=2.5VDC+0.2Vp-p
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
IOUT=1mA
IOUT=30mA
IOUT=100mA
IOUT=1mA
IOUT=30mA
IOUT=100mA
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency f (kHz)
Frequency f (kHz)
RP131x331x
RP131x501x
V
IN=4.3VDC+0.2Vp-p
VIN=6.0VDC+0.2Vp-p
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
I
I
I
OUT=1mA
OUT=30mA
OUT=100mA
OUT=30mA
OUT=100mA
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency f (kHz)
Frequency f (kHz)
15
RP131x
NO.EA-174-160426
10) Input Transient Response (IOUT=100mA, tr=tf=5μs, C1=none, Topt=25°C)
RP131x081x
RP131x151x
C2=Ceramic2.2μF
C2=Ceramic2.2μF
3
2
1
4
3
2
Input Voltage
Input Voltage
0.81
0.80
0.79
1.51
1.50
1.49
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80 90
0
10 20 30 40 50 60 70 80 90
Time t (μs)
Time t (μs)
RP131x331x
RP131x501x
C2=Ceramic2.2μF
C2=Ceramic4.7μF
6
5
4
7
Input Voltage
6
5
Input Voltage
3.31
3.30
3.29
5.005
5.000
4.995
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80 90
0
10 20 30 40 50 60 70 80 90
Time t (μs)
Time t (μs)
11) Load Transient Response (tr=tf=0.5μs, C1=Ceramic 2.2μF, VIN=VOUT+1.0V, Topt=25°C)
RP131x081x RP131x151x
C2=Ceramic2.2μF
C2=Ceramic2.2μF
110
90
110
90
Output Current
50mA 100mA
Output Current
50mA 100mA
70
70
50
50
0.81
0.80
0.79
0.78
1.52
1.50
1.48
1.46
Output Voltage
Output Voltage
0
20 40 60 80 100 120 140 160 180
0
20 40 60 80 100 120 140 160 180
Time t (μs)
Time t (μs)
16
RP131x
NO.EA-174-160426
RP131x331x
RP131x501x
C2=Ceramic4.7μF
C2=Ceramic4.7μF
110
90
110
90
Output Current
50mA 100mA
Output Current
50mA 100mA
70
70
50
50
3.33
3.32
3.31
3.30
3.29
3.28
3.27
5.02
5.01
5.00
4.99
4.98
4.97
Output Voltage
Output Voltage
0
0
0
20 40 60 80 100 120 140 160 180
0
0
0
20 40 60 80 100 120 140 160 180
Time t (μs)
Time t (μs)
RP131x081x
RP131x151x
C2=Ceramic2.2μF
C2=Ceramic2.2μF
40
40
Output Current
0mA 30mA
20
0
Output Current
0mA 30mA
20
0
0.82
0.80
0.78
0.76
1.52
1.50
1.48
1.46
Output Voltage
Output Voltage
20 40 60 80 100 120 140 160 180
20 40 60 80 100 120 140 160 180
Time t (μs)
Time t (μs)
RP131x331x
RP131x501x
C2=Ceramic4.7μF
C2=Ceramic4.7μF
40
40
20
0
Output Current
0mA 30mA
Output Current
0mA 30mA
20
0
5.01
5.00
4.99
4.98
4.97
3.32
3.30
3.28
3.26
Output Voltage
Output Voltage
20 40 60 80 100 120 140 160 180
20 40 60 80 100 120 140 160 180
Time t (μs)
Time t (μs)
17
RP131x
NO.EA-174-160426
RP131x081x
RP131x151x
C2=Ceramic2.2μF
C2=Ceramic2.2μF
600
400
200
0
600
400
200
0
Output Current
100mA 500mA
Output Current
100mA 500mA
1.0
0.8
0.6
0.4
1.7
1.5
1.3
1.1
Output Voltage
Output Voltage
0
20 40 60 80 100 120 140 160 180
0
20 40 60 80 100 120 140 160 180
Time t (μs)
Time t (μs)
RP131x331x
RP131x501x
C2=Ceramic4.7μF
C2=Ceramic4.7μF
600
600
400
200
0
400
200
0
Output Current
100mA 500mA
Output Current
100mA 500mA
3.5
3.3
3.1
2.9
2.7
5.2
5.0
4.8
4.6
Output Voltage
Output Voltage
0
20 40 60 80 100 120 140 160 180
0
20 40 60 80 100 120 140 160 180
Time t (μs)
Time t (μs)
12) Turn On Speed with CE pin (C1=Ceramic 2.2μF, C2=Ceramic 4.7μF, Topt=25°C)
RP131x081x
RP131x501x
V
IN=1.8V
VIN=6.0V
3
2
1
0
9
6
3
0
CE Input Voltage
CE Input Voltage
Output Voltage
6
4
2
0
Output Voltage
0.8
0.4
0
I
I
OUT=0mA
OUT=100mA
I
I
OUT=0mA
OUT=100mA
0
50 100 150 200 250 300 350 400 450
0
50 100 150 200 250 300 350 400 450
Time t (μs)
Time t (μs)
18
RP131x
NO.EA-174-160426
13) Turn Off Speed with CE pin (D Version) (C1=Ceramic 2.2μF, C2=Ceramic 4.7μF, Topt=25°C)
RP131x081D
RP131x501D
VIN=1.8V
VIN=6.0V
3
2
1
0
9
6
3
0
CE Input Voltage
CE Input Voltage
6
4
2
0
Output Voltage
0.8
0.4
0
Output Voltage
I
OUT=0mA
I
OUT=0mA
IOUT=100mA
IOUT=100mA
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Time t (ms)
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Time t (ms)
14) Inrush Current at turning on (C1=Ceramic 2.2μF, C2=Ceramic 4.7μF, Topt=25°C)
RP131x081x RP131x501x
V
IN=2.3V
VIN=6.5V
700
600
500
400
300
200
100
0
800
700
600
500
400
300
200
100
0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
8
7
6
5
4
3
2
1
0
CE Input Voltage
Output Voltage
CE Input Voltage
Output Voltage
Inrush Current
Inrush Current
0
40 80 120 160 200 240 280 320
0
40 80 120 160 200 240 280 320
Time t (μs)
Time t (μs)
15) Minimum Operating Voltage
RP131x081x
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
Hatched area is available
for 0.8V output.
0
200
400
600
800
1000
Output Current IOUT (mA)
19
RP131x
NO.EA-174-160426
ESR vs. Output Current
When using these ICs, consider the following points:
The relations between IOUT (Output Current) and ESR of an output capacitor are shown below.
The conditions when the white noise level is under 40μV (Avg.) are marked as the hatched area in the graph.
Measurement conditions
Frequency Band : 10Hz to 3MHz
Temperature
: −40°C to 85°C
C1
C2
: 2.2μF (Kyocera, CM05X5R225M04AD)
: 2.2μF (Kyocera, CM105X5R225K06AE)
4.7μF (Kyocera, CM105X5R475M06AB)
RP131x081x
RP131x151x
VIN=1.6V to 6.0V
C1=Ceramic 2.2μF, C2=Ceramic 2.2μF
VIN=1.6V to 6.0V
C1=Ceramic 2.2μF, C2=Ceramic 2.2μF
100
10
100
10
Topt=85°C
Topt=85°C
-
Topt= 40°C
-
Topt= 40°C
1
1
0.1
0.01
0.1
0.01
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
RP131x331x
RP131x501x
V
IN=3.3V to 6.0V
VIN=5.0V to 6.0V
C1=Ceramic 2.2μF, C2=Ceramic 4.7μF
C1=Ceramic 2.2μF, C2=Ceramic 2.2μF
100
10
100
10
Topt=85°C
Topt=85°C
-
-
Topt= 40°C
Topt= 40°C
1
1
0.1
0.01
0.1
0.01
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
0
100 200 300 400 500 600 700 800 9001000
Output Current IOUT (mA)
20
RP131x
NO.EA-174-160426
PACKAGE INFORMATION
Power Dissipation (DFN1616-6B)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on
board. This specification is based on the measurement at the condition below:
* Measurement Conditions
Standard Test Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double-sided)
40mm*40mm*1.6mm
Top side: Approx. 50%, Back side: Approx. 50%
φ 0.5mm * 32pcs
Through-holes
Measurement Result
(Ta=25ºC)
Standard Test Land Pattern
640mW (Tjmax=125ºC)
Power Dissipation
820mW (Tjmax=150ºC)
θja = (125-25ºC)/0.64W= 156ºC/W
θjc=23ºC/W
Thermal Resistance
□40
1000
900
800
800
700
600
640
500
400
300
200
100
0
0
25
50
75
100
125
150
85
Ambient Temperature (°C)
Measurement Board Pattern
Power Dissipation
IC Mount Area (Unit: mm)
The above graph shows the Power Dissipation of the package based on Tjmax=125ºC and Tjmax=150ºC.
Operating the IC in the shaded area in the graph might have an influence it's lifetime. Operating time must
be within the time limit described in the table below, in case of operating in the shaded area.
Estimated years
Operating Time
(Operating four hours/day)
13,000 hours
9years
21
RP131x
NO.EA-174-160426
Package Dimensions (DFN1616-6B)
1.60
1.30±0.05
B
A
4
6
X4
0.05
※
INDEX
3
1
0.5
0.20±0.05
0.05 M AB
(Unit : mm)
Bottom View
0.05 S
S
※) Tab is GND level. (They are connected to the
reverse side of this IC.)
The tab is better to be connected to the GND,
but leaving it open is also acceptable.
Mark Specifications (DFN1616-6B)
cdef: Product Code … Refer to RP131L Series Mark Specification Table.
gh: Lot Number … Alphanumeric Serial Number
① ② ③
④ ⑤ ⑥
22
RP131x
NO.EA-174-160426
RP131L Series Mark Specification Table
PKG: DFN1616-6B
RP131Lxx1B
Part Number
RP131L081B
RP131L091B
RP131L101B
RP131L111B
RP131L121B
RP131L121B5
RP131L131B
RP131L141B
RP131L151B
RP131L161B
RP131L171B
RP131L181B
RP131L181B5
RP131L191B
RP131L201B
RP131L211B
RP131L221B
RP131L231B
RP131L241B
RP131L251B
RP131L261B
RP131L271B
RP131L281B
RP131L281B5
RP131L291B
RP131L301B
RP131L311B
RP131L321B
RP131L331B
RP131L341B
RP131L351B
RP131L361B
RP131L371B
RP131L381B
RP131L391B
RP131L401B
RP131L411B
RP131L421B
RP131L431B
RP131L441B
RP131L451B
RP131L461B
RP131L471B
RP131L481B
RP131L491B
RP131L501B
RP131L101B5
RP131L511B
RP131L521B
RP131L531B
RP131L541B
RP131L551B
RP131Lxx1D
cdef
C B 0 1
C B 0 2
C B 0 3
C B 0 4
C B 0 5
C B 0 6
C B 0 7
C B 0 8
C B 0 9
C B 1 0
C B 1 1
C B 1 2
C B 1 3
C B 1 4
C B 1 5
C B 1 6
C B 1 7
C B 1 8
C B 1 9
C B 2 0
C B 2 1
C B 2 2
C B 2 3
C B 2 4
C B 2 5
C B 2 6
C B 2 7
C B 2 8
C B 2 9
C B 3 0
C B 3 1
C B 3 2
C B 3 3
C B 3 4
C B 3 5
C B 3 6
C B 3 7
C B 3 8
C B 3 9
C B 4 0
C B 4 1
C B 4 2
C B 4 3
C B 4 4
C B 4 5
C B 4 6
C B 4 7
C B 4 8
C B 4 9
C B 5 0
C B 5 1
C B 5 2
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.25V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.85V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
1.05V
5.1V
5.2V
5.3V
5.4V
5.5V
Part Number
RP131L081D
RP131L091D
RP131L101D
RP131L111D
RP131L121D
RP131L121D5
RP131L131D
RP131L141D
RP131L151D
RP131L161D
RP131L171D
RP131L181D
RP131L181D5
RP131L191D
RP131L201D
RP131L211D
RP131L221D
RP131L231D
RP131L241D
RP131L251D
RP131L261D
RP131L271D
RP131L281D
RP131L281D5
RP131L291D
RP131L301D
RP131L311D
RP131L321D
RP131L331D
RP131L341D
RP131L351D
RP131L361D
RP131L371D
RP131L381D
RP131L391D
RP131L401D
RP131L411D
RP131L421D
RP131L431D
RP131L441D
RP131L451D
RP131L461D
RP131L471D
RP131L481D
RP131L491D
RP131L501D
RP131L101D5
RP131L511D
RP131L521D
RP131L531D
RP131L541D
RP131L551D
cdef
C C 0 1
C C 0 2
C C 0 3
C C 0 4
C C 0 5
C C 0 6
C C 0 7
C C 0 8
C C 0 9
C C 1 0
C C 1 1
C C 1 2
C C 1 3
C C 1 4
C C 1 5
C C 1 6
C C 1 7
C C 1 8
C C 1 9
C C 2 0
C C 2 1
C C 2 2
C C 2 3
C C 2 4
C C 2 5
C C 2 6
C C 2 7
C C 2 8
C C 2 9
C C 3 0
C C 3 1
C C 3 2
C C 3 3
C C 3 4
C C 3 5
C C 3 6
C C 3 7
C C 3 8
C C 3 9
C C 4 0
C C 4 1
C C 4 2
C C 4 3
C C 4 4
C C 4 5
C C 4 6
C C 4 7
C C 4 8
C C 4 9
C C 5 0
C C 5 1
C C 5 2
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.25V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.85V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
1.05V
5.1V
5.2V
5.3V
5.4V
5.5V
23
RP131x
NO.EA-174-160426
Power Dissipation (DFN(PLP)1820-6)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
Measurement Conditions
Standard Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double-sided)
40mm * 40mm * 1.6mm
Top side: Approx. 50%, Back side: Approx. 50%
φ0.54mm * 30pcs
Through-hole
Measurement Result
(Ta=25°C)
Standard Land Pattern
880mW(Tjmax=125°C)
1100mW(Tjmax=150°C)
Power Dissipation
Thermal Resistance
θja=(125 - 25°C)/0.88W=114°C/W
40
1200
1100
1000
800
600
400
200
0
880
85
0
25
50
75
100
125
150
Measurement Board Pattern
Ambient Temperature (°C)
IC Mount Area Unit: mm
- The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C.
Operating the IC in the shaded area in the graph might have an influence it's lifetime.
Operating time must be within the time limit described in the table below, in case of operating in the shaded area.
Estimated years
Operating Time
(Operating four hours/day)
13,000 hours
9years
24
RP131x
NO.EA-174-160426
Package Dimensions (DFN(PLP)1820-6)
0.1
1.6±
0.1
0.20±
1.80
0.05 M AB
B
A
5
4
6
X4
0.05
*
INDEX
3
2
1
0.5
0.1NOM.
0.1
0.3±
0.05 S
Bottom View
(Unit: mm)
S
) Tab is GND level. (They are connected to the
reverse side of this IC.)
*
The tab is better to be connected to the GND, but
leaving it open is also acceptable.
Mark Specifications (DFN(PLP)1820-6)
cdef: Product Code …Refer to RP131K Series Mark Specification Table.
gh: Lot Number … Alphanumeric Serial Number
6
5
4
cde
fgh
1
2
3
25
RP131x
NO.EA-174-160426
RP131K Series Mark Specification Table
PKG: DFN(PLP)1820-6
RP131Kxx1B
RP131Kxx1D
Part Number
RP131K081B
RP131K091B
RP131K101B
RP131K111B
RP131K121B
RP131K121B5
RP131K131B
RP131K141B
RP131K151B
RP131K161B
RP131K171B
RP131K181B
RP131K181B5
RP131K191B
RP131K201B
RP131K211B
RP131K221B
RP131K231B
RP131K241B
RP131K251B
RP131K261B
RP131K271B
RP131K281B
RP131K281B5
RP131K291B
RP131K301B
RP131K311B
RP131K321B
RP131K331B
RP131K341B
RP131K351B
RP131K361B
RP131K371B
RP131K381B
RP131K391B
RP131K401B
RP131K411B
RP131K421B
RP131K431B
RP131K441B
RP131K451B
RP131K461B
RP131K471B
RP131K481B
RP131K491B
RP131K501B
RP131K101B5
RP131K551B
RP131K511B
RP131K521B
RP131K531B
RP131K541B
cdef
A M 0 1
A M 0 2
A M 0 3
A M 0 4
A M 0 5
A M 0 6
A M 0 7
A M 0 8
A M 0 9
A M 1 0
A M 1 1
A M 1 2
A M 1 3
A M 1 4
A M 1 5
A M 1 6
A M 1 7
A M 1 8
A M 1 9
A M 2 0
A M 2 1
A M 2 2
A M 2 3
A M 2 4
A M 2 5
A M 2 6
A M 2 7
A M 2 8
A M 2 9
A M 3 0
A M 3 1
A M 3 2
A M 3 3
A M 3 4
A M 3 5
A M 3 6
A M 3 7
A M 3 8
A M 3 9
A M 4 0
A M 4 1
A M 4 2
A M 4 3
A M 4 4
A M 4 5
A M 4 6
A M 4 7
A M 4 8
A M 4 9
A M 5 0
A M 5 1
A M 5 2
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.25V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.85V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
1.05V
5.5V
5.1V
5.2V
5.3V
5.4V
Part Number
RP131K081D
RP131K091D
RP131K101D
RP131K111D
RP131K121D
RP131K121D5
RP131K131D
RP131K141D
RP131K151D
RP131K161D
RP131K171D
RP131K181D
RP131K181D5
RP131K191D
RP131K201D
RP131K211D
RP131K221D
RP131K231D
RP131K241D
RP131K251D
RP131K261D
RP131K271D
RP131K281D
RP131K281D5
RP131K291D
RP131K301D
RP131K311D
RP131K321D
RP131K331D
RP131K341D
RP131K351D
RP131K361D
RP131K371D
RP131K381D
RP131K391D
RP131K401D
RP131K411D
RP131K421D
RP131K431D
RP131K441D
RP131K451D
RP131K461D
RP131K471D
RP131K481D
RP131K491D
RP131K501D
RP131K101D5
RP131K551D
RP131K511D
RP131K521D
RP131K531D
RP131K541D
cdef
A N 0 1
A N 0 2
A N 0 3
A N 0 4
A N 0 5
A N 0 6
A N 0 7
A N 0 8
A N 0 9
A N 1 0
A N 1 1
A N 1 2
A N 1 3
A N 1 4
A N 1 5
A N 1 6
A N 1 7
A N 1 8
A N 1 9
A N 2 0
A N 2 1
A N 2 2
A N 2 3
A N 2 4
A N 2 5
A N 2 6
A N 2 7
A N 2 8
A N 2 9
A N 3 0
A N 3 1
A N 3 2
A N 3 3
A N 3 4
A N 3 5
A N 3 6
A N 3 7
A N 3 8
A N 3 9
A N 4 0
A N 4 1
A N 4 2
A N 4 3
A N 4 4
A N 4 5
A N 4 6
A N 4 7
A N 4 8
A N 4 9
A N 5 0
A N 5 1
A N 5 2
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.25V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.85V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.85V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
1.05V
5.5V
5.1V
5.2V
5.3V
5.4V
26
RP131x
NO.EA-174-160426
Power Dissipation (SOT-89-5)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
Measurement Conditions
High Wattage Land Pattern
Standard Land Pattern
Environment
Board Material
Mounting on Board (Wind velocity=0m/s) Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double-sided)
Glass cloth epoxy plastic (Double-sided)
Board Dimensions
30mm ∗ 30mm ∗ 1.6mm
50mm * 50mm ∗ 1.6mm
Top side: Approx. 20%
Back side: Approx. 100%
Top side: Approx. 10%
Back side: Approx. 100%
Copper Ratio
Through-hole
-
φ0.85mm ∗ 10pcs
Measurement Result
(Ta=25°C)
High Wattage Land Pattern
1300mW
Standard Land Pattern
900mW (Tjmax=125°C)
1125mW (Tjmax=150°C)
Free Air
Power Dissipation
500mW
Thermal Resistance
77°C/W
111°C/W
200°C/W
1500
1400
1300
1200
1100
1000
900
800
700
600
500
400
300
200
100
0
On Board
(High Wattage Land Pattern)
1500
1400
1300
On Board
1125
1200
On Board
(Standard Land Pattern)
1100
1000
900
800
900
700
600
500
400
300
200
100
0
Free Air
85
0
25
50
75
100
125
150
0
25
50
75
100
125
150
85
Ambient Temperature (°C)
Ambient Temperature (°C)
Power Dissipation
30
15
50
- The above graph shows the Power Dissipation
of the package based on Tjmax=125°C and
Tjmax=150°C.
7.5
Operating the IC in the shaded area in the graph
might have an influence it's lifetime.
Operating time must be within the time limit
described in the table below, in case of
operating in the shaded area.
High Wattage
Standard
Estimated years
Operating Time
Measurement Board Pattern
(Operating four hours/day)
IC Mount Area Unit: mm
4,500 hours
3years
27
RP131x
NO.EA-174-160426
Package Dimensions (SOT-89-5)
4.5±0.1
1.6±0.2
1.5±0.1
0.4±0.1
0.42±0.1
4
5
5
4
φ1.0
0.1 S
1
2
3
3
2
1
0.4±0.1
S
Bottom View
0.42±0.1
0.47±0.1
0.42±0.1
1.5±0.1 1.5±0.1
Unit : mm
Mark Specifications (SOT-89-5)
cdef: Product Code …Refer to RP131H Series Mark Specification Table.
gh: Lot Number … Alphanumeric Serial Number
cde
fgh
28
RP131x
NO.EA-174-160426
RP131H Series Mark Specification Table
PKG: SOT-89-5
RP131Hxx1B
RP131Hxx1D
Part Number
RP131H081B
RP131H091B
RP131H101B
RP131H111B
RP131H121B
RP131H131B
RP131H141B
RP131H151B
RP131H161B
RP131H171B
RP131H181B
RP131H191B
RP131H201B
RP131H211B
RP131H221B
RP131H231B
RP131H241B
RP131H251B
RP131H261B
RP131H271B
RP131H281B
RP131H291B
RP131H301B
RP131H311B
RP131H321B
RP131H331B
RP131H341B
RP131H351B
RP131H361B
RP131H371B
RP131H381B
RP131H391B
RP131H401B
RP131H411B
RP131H421B
RP131H431B
RP131H441B
RP131H451B
RP131H461B
RP131H471B
RP131H481B
RP131H491B
RP131H501B
RP131H511B
RP131H521B
RP131H531B
RP131H541B
RP131H551B
RP131H121B5
RP131H181B5
RP131H281B5
RP131H101B5
cdef
U 0 8 B
U 0 9 B
U 1 0 B
U 1 1 B
U 1 2 B
U 1 3 B
U 1 4 B
U 1 5 B
U 1 6 B
U 1 7 B
U 1 8 B
U 1 9 B
U 2 0 B
U 2 1 B
U 2 2 B
U 2 3 B
U 2 4 B
U 2 5 B
U 2 6 B
U 2 7 B
U 2 8 B
U 2 9 B
U 3 0 B
U 3 1 B
U 3 2 B
U 3 3 B
U 3 4 B
U 3 5 B
U 3 6 B
U 3 7 B
U 3 8 B
U 3 9 B
U 4 0 B
U 4 1 B
U 4 2 B
U 4 3 B
U 4 4 B
U 4 5 B
U 4 6 B
U 4 7 B
U 4 8 B
U 4 9 B
U 5 0 B
U 5 1 B
U 5 2 B
U 5 3 B
U 5 4 B
U 5 5 B
U 0 1 B
U 0 2 B
U 0 3 B
U 0 4 B
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
5.1V
5.2V
5.3V
5.4V
5.5V
1.25V
1.85V
2.85V
1.05V
Part Number
RP131H081D
RP131H091D
RP131H101D
RP131H111D
RP131H121D
RP131H131D
RP131H141D
RP131H151D
RP131H161D
RP131H171D
RP131H181D
RP131H191D
RP131H201D
RP131H211D
RP131H221D
RP131H231D
RP131H241D
RP131H251D
RP131H261D
RP131H271D
RP131H281D
RP131H291D
RP131H301D
RP131H311D
RP131H321D
RP131H331D
RP131H341D
RP131H351D
RP131H361D
RP131H371D
RP131H381D
RP131H391D
RP131H401D
RP131H411D
RP131H421D
RP131H431D
RP131H441D
RP131H451D
RP131H461D
RP131H471D
RP131H481D
RP131H491D
RP131H501D
RP131H511D
RP131H521D
RP131H531D
RP131H541D
RP131H551D
RP131H121D5
RP131H181D5
RP131H281D5
RP131H101D5
cdef
U 0 8 D
U 0 9 D
U 1 0 D
U 1 1 D
U 1 2 D
U 1 3 D
U 1 4 D
U 1 5 D
U 1 6 D
U 1 7 D
U 1 8 D
U 1 9 D
U 2 0 D
U 2 1 D
U 2 2 D
U 2 3 D
U 2 4 D
U 2 5 D
U 2 6 D
U 2 7 D
U 2 8 D
U 2 9 D
U 3 0 D
U 3 1 D
U 3 2 D
U 3 3 D
U 3 4 D
U 3 5 D
U 3 6 D
U 3 7 D
U 3 8 D
U 3 9 D
U 4 0 D
U 4 1 D
U 4 2 D
U 4 3 D
U 4 4 D
U 4 5 D
U 4 6 D
U 4 7 D
U 4 8 D
U 4 9 D
U 5 0 D
U 5 1 D
U 5 2 D
U 5 3 D
U 5 4 D
U 5 5 D
U 0 1 D
U 0 2 D
U 0 3 D
U 0 4 D
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
5.1V
5.2V
5.3V
5.4V
5.5V
1.25V
1.85V
2.85V
1.05V
29
RP131x
NO.EA-174-160426
Power Dissipation (HSOP-6J)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
Measurement Conditions
High Wattage Land Pattern
Standard Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double-sided)
50mm * 50mm * 1.6mm
90%
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double-sided)
50mm * 50mm * 1.6mm
50%
Through-hole
φ0.5mm * 44pcs
φ0.5mm * 44pcs
Measurement Result
(Ta=25°C)
High Wattage Land Pattern
2000mW
Standard Land Pattern
1700mW (Tjmax=125°C)
2125mW (Tjmax=150°C)
Free Air
Power Dissipation
540mW
Thermal Resistance
50°C/W
59°C/W
185°C/W
2600
2600
2400
2400
2200
2000
1800
1600
1400
1200
1000
800
On Board
(High Wattage Land Pattern)
2125
1700
On Board
2200
2000
1800
1600
1400
1200
1000
800
On Board
(Standard Land Pattern)
1700
540
Free Air
600
600
400
400
200
0
200
0
85
0
25
50
75
100
125 150
85
75
0
25
50
100
125
150
Ambient Temperature (°C)
Ambient Temperature (°C)
Power Dissipation
50
18
50
20
- The above graph shows the Power Dissipation of the
package based on Tjmax=125°C and Tjmax=150°C.
Operating the IC in the shaded area in the graph might
have an influence it's lifetime.
Operating time must be within the time limit described
in the table below, in case of operating in the shaded
area.
High Wattage
Standard
Operating Time
1,500 hours
Measurement Board Pattern
IC Mount Area Unit: mm
30
RP131x
NO.EA-174-160426
Package Dimensions (HSOP-6J)
5.02±0.3
6
5
4
1
2
3
3.81
+0.10
-0.05
0.2
0.605TYP.
1.67±0.1
0.4±0.1
0.10
(Unit: mm)
0.12 M
Mark Specifications (HSOP-6J)
cdef: Product Code …Refer to RP131S Series Mark Specification Table.
gh: Lot Number … Alphanumeric Serial Number
cde
fgh
31
RP131x
NO.EA-174-160426
RP131S Series Mark Specification Table
PKG: HSOP-6J
RP131Sxx1B
RP131Sxx1D
Part Number
RP131S081B
RP131S091B
RP131S101B
RP131S111B
RP131S121B
RP131S131B
RP131S141B
RP131S151B
RP131S161B
RP131S171B
RP131S181B
RP131S191B
RP131S201B
RP131S211B
RP131S221B
RP131S231B
RP131S241B
RP131S251B
RP131S261B
RP131S271B
RP131S281B
RP131S291B
RP131S301B
RP131S311B
RP131S321B
RP131S331B
RP131S341B
RP131S351B
RP131S361B
RP131S371B
RP131S381B
RP131S391B
RP131S401B
RP131S411B
RP131S421B
RP131S431B
RP131S441B
RP131S451B
RP131S461B
RP131S471B
RP131S481B
RP131S491B
RP131S501B
RP131S511B
RP131S521B
RP131S531B
RP131S541B
RP131S551B
RP131S121B5
RP131S181B5
RP131S281B5
RP131S101B5
cdef
G 0 8 B
G 0 9 B
G 1 0 B
G 1 1 B
G 1 2 B
G 1 3 B
G 1 4 B
G 1 5 B
G 1 6 B
G 1 7 B
G 1 8 B
G 1 9 B
G 2 0 B
G 2 1 B
G 2 2 B
G 2 3 B
G 2 4 B
G 2 5 B
G 2 6 B
G 2 7 B
G 2 8 B
G 2 9 B
G 3 0 B
G 3 1 B
G 3 2 B
G 3 3 B
G 3 4 B
G 3 5 B
G 3 6 B
G 3 7 B
G 3 8 B
G 3 9 B
G 4 0 B
G 4 1 B
G 4 2 B
G 4 3 B
G 4 4 B
G 4 5 B
G 4 6 B
G 4 7 B
G 4 8 B
G 4 9 B
G 5 0 B
G 5 1 B
G 5 2 B
G 5 3 B
G 5 4 B
G 5 5 B
G 0 1 B
G 0 2 B
G 0 3 B
G 0 4 B
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
5.1V
5.2V
5.3V
5.4V
5.5V
1.25V
1.85V
2.85V
1.05V
Part Number
RP131S081D
RP131S091D
RP131S101D
RP131S111D
RP131S121D
RP131S131D
RP131S141D
RP131S151D
RP131S161D
RP131S171D
RP131S181D
RP131S191D
RP131S201D
RP131S211D
RP131S221D
RP131S231D
RP131S241D
RP131S251D
RP131S261D
RP131S271D
RP131S281D
RP131S291D
RP131S301D
RP131S311D
RP131S321D
RP131S331D
RP131S341D
RP131S351D
RP131S361D
RP131S371D
RP131S381D
RP131S391D
RP131S401D
RP131S411D
RP131S421D
RP131S431D
RP131S441D
RP131S451D
RP131S461D
RP131S471D
RP131S481D
RP131S491D
RP131S501D
RP131S511D
RP131S521D
RP131S531D
RP131S541D
RP131S551D
RP131S121D5
RP131S181D5
RP131S281D5
RP131S101D5
cdef
G 0 8 D
G 0 9 D
G 1 0 D
G 1 1 D
G 1 2 D
G 1 3 D
G 1 4 D
G 1 5 D
G 1 6 D
G 1 7 D
G 1 8 D
G 1 9 D
G 2 0 D
G 2 1 D
G 2 2 D
G 2 3 D
G 2 4 D
G 2 5 D
G 2 6 D
G 2 7 D
G 2 8 D
G 2 9 D
G 3 0 D
G 3 1 D
G 3 2 D
G 3 3 D
G 3 4 D
G 3 5 D
G 3 6 D
G 3 7 D
G 3 8 D
G 3 9 D
G 4 0 D
G 4 1 D
G 4 2 D
G 4 3 D
G 4 4 D
G 4 5 D
G 4 6 D
G 4 7 D
G 4 8 D
G 4 9 D
G 5 0 D
G 5 1 D
G 5 2 D
G 5 3 D
G 5 4 D
G 5 5 D
G 0 1 D
G 0 2 D
G 0 3 D
G 0 4 D
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
5.1V
5.2V
5.3V
5.4V
5.5V
1.25V
1.85V
2.85V
1.05V
32
RP131x
NO.EA-174-160426
Power Dissipation (TO-252-5-P2)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
Measurement conditions
Land Pattern A
Mounting on board (Wind velocity 0m/s)
Glass cloth epoxy plastic
(Double-layers)
Land Pattern B
Mounting on board (Wind velocity 0m/s)
Glass cloth epoxy plastic
(Four-layers)
Environment
Board Material
Board Dimensions
Copper Ratio
50mm * 50mm * 1.6mm
Top side: Approx. 50%,
Back side: Approx. 50%
φ 0.5mm * 24pcs
76.2mm * 114.3mm * 0.8mm
Top, Back side: Approx. 96%,
2nd, 3rd: 100%
Through - hole
φ 0.4mm * 30pcs
Measurement Results
(Ta=25°C)
Land pattern B
3800mW (Tjmax=125°C)
4750mW (Tjmax=150°C)
θja= (125-25°C)/3.8W = 26°C/W
θjc= 7°C/W
Land pattern A
1900mW (Tjmax=125°C)
2375mW (Tjmax=150°C)
θja=(125-25°C)/1.9W= 53°C/W
θjc= 17°C/W
Power Dissipation
Thermal Resistance
Land pattern B
Land pattern A
5200
4800
4400
4000
3600
3200
2800
2400
2000
1600
1200
800
4750
3800
2600
2400
2375
2200
2000
1800
1900
1600
1400
1200
1000
800
600
400
200
0
400
0
85
0
25
50
75
100
125
150
85
0
25
50
75
100
125
150
Ambient Temperature (°C)
Power Dissipation
Ambient Temperature (°C)
76.2
50
- The above graph shows the Power Dissipation of the
package based on Tjmax=125°C and Tjmax=150°C.
Operating the IC in the shaded area in the graph might have
50
an influence it's lifetime.
Operating time must be within the time limit described in the
table below, in case of operating in the shaded area.
Estimated years
Operating Time
(Operating four hours/day)
13,000 hours
9years
Board A
Board B
Measurent Board Pattern
IC Mount Area Unit : mm
Measurent Board Pattern
IC Mount Area Unit : mm
33
RP131x
NO.EA-174-160426
Package Dimensions (TO-252-5-P2)
6.60±0.20
C0.60
0.50±0.10
5.34±0.20
(0°~8°)
1
5
0.50±0.10
0.50±0.10
S
0.12 M
0.10
1.27
(5.04)
(4.19)
R0.325
R0.225
(1.50)
(Unit: mm)
Mark Specifications (TO-252-5-P2)
①②③④⑤⑥
⑦⑧ ⑨⑩
cdefghij: Refer to RP131J Series Mark Specification Table.
kl: Lot Number … Alphanumeric Serial Number
34
RP131x
NO.EA-174-160426
RP131J Series Mark Specification Table
PKG: TO-252-5
RP131Jxx1B
RP131Jxx1D
Part Number
RP131J081B
RP131J091B
RP131J101B
RP131J111B
RP131J121B
RP131J131B
RP131J141B
RP131J151B
RP131J161B
RP131J171B
RP131J181B
RP131J191B
RP131J201B
RP131J211B
RP131J221B
RP131J231B
RP131J241B
RP131J251B
RP131J261B
RP131J271B
RP131J281B
RP131J291B
RP131J301B
RP131J311B
RP131J321B
RP131J331B
RP131J341B
RP131J351B
RP131J361B
RP131J371B
RP131J381B
RP131J391B
RP131J401B
RP131J411B
RP131J421B
RP131J431B
RP131J441B
RP131J451B
RP131J461B
RP131J471B
RP131J481B
RP131J491B
RP131J501B
RP131J511B
RP131J521B
RP131J531B
RP131J541B
RP131J551B
RP131J121B5
RP131J181B5
RP131J281B5
RP131J101B5
cdefghij
D 1 J 0 8 1 B
D 1 J 0 9 1 B
D 1 J 1 0 1 B
D 1 J 1 1 1 B
D 1 J 1 2 1 B
D 1 J 1 3 1 B
D 1 J 1 4 1 B
D 1 J 1 5 1 B
D 1 J 1 6 1 B
D 1 J 1 7 1 B
D 1 J 1 8 1 B
D 1 J 1 9 1 B
D 1 J 2 0 1 B
D 1 J 2 1 1 B
D 1 J 2 2 1 B
D 1 J 2 3 1 B
D 1 J 2 4 1 B
D 1 J 2 5 1 B
D 1 J 2 6 1 B
D 1 J 2 7 1 B
D 1 J 2 8 1 B
D 1 J 2 9 1 B
D 1 J 3 0 1 B
D 1 J 3 1 1 B
D 1 J 3 2 1 B
D 1 J 3 3 1 B
D 1 J 3 4 1 B
D 1 J 3 5 1 B
D 1 J 3 6 1 B
D 1 J 3 7 1 B
D 1 J 3 8 1 B
D 1 J 3 9 1 B
D 1 J 4 0 1 B
D 1 J 4 1 1 B
D 1 J 4 2 1 B
D 1 J 4 3 1 B
D 1 J 4 4 1 B
D 1 J 4 5 1 B
D 1 J 4 6 1 B
D 1 J 4 7 1 B
D 1 J 4 8 1 B
D 1 J 4 9 1 B
D 1 J 5 0 1 B
D 1 J 5 1 1 B
D 1 J 5 2 1 B
D 1 J 5 3 1 B
D 1 J 5 4 1 B
D 1 J 5 5 1 B
D 1 J 1 2 1 B 5
D 1 J 1 8 1 B 5
D 1 J 2 8 1 B 5
D 1 J 1 0 1 B 5
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
5.1V
5.2V
5.3V
5.4V
5.5V
1.25V
1.85V
2.85V
1.05V
Part Number
RP131J081D
RP131J091D
RP131J101D
RP131J111D
RP131J121D
RP131J131D
RP131J141D
RP131J151D
RP131J161D
RP131J171D
RP131J181D
RP131J191D
RP131J201D
RP131J211D
RP131J221D
RP131J231D
RP131J241D
RP131J251D
RP131J261D
RP131J271D
RP131J281D
RP131J291D
RP131J301D
RP131J311D
RP131J321D
RP131J331D
RP131J341D
RP131J351D
RP131J361D
RP131J371D
RP131J381D
RP131J391D
RP131J401D
RP131J411D
RP131J421D
RP131J431D
RP131J441D
RP131J451D
RP131J461D
RP131J471D
RP131J481D
RP131J491D
RP131J501D
RP131J511D
RP131J521D
RP131J531D
RP131J541D
RP131J551D
RP131J121D5
RP131J181D5
RP131J281D5
RP131J101B5
cdefghij
D 1 J 0 8 1 D
D 1 J 0 9 1 D
D 1 J 1 0 1 D
D 1 J 1 1 1 D
D 1 J 1 2 1 D
D 1 J 1 3 1 D
D 1 J 1 4 1 D
D 1 J 1 5 1 D
D 1 J 1 6 1 D
D 1 J 1 7 1 D
D 1 J 1 8 1 D
D 1 J 1 9 1 D
D 1 J 2 0 1 D
D 1 J 2 1 1 D
D 1 J 2 2 1 D
D 1 J 2 3 1 D
D 1 J 2 4 1 D
D 1 J 2 5 1 D
D 1 J 2 6 1 D
D 1 J 2 7 1 D
D 1 J 2 8 1 D
D 1 J 2 9 1 D
D 1 J 3 0 1 D
D 1 J 3 1 1 D
D 1 J 3 2 1 D
D 1 J 3 3 1 D
D 1 J 3 4 1 D
D 1 J 3 5 1 D
D 1 J 3 6 1 D
D 1 J 3 7 1 D
D 1 J 3 8 1 D
D 1 J 3 9 1 D
D 1 J 4 0 1 D
D 1 J 4 1 1 D
D 1 J 4 2 1 D
D 1 J 4 3 1 D
D 1 J 4 4 1 D
D 1 J 4 5 1 D
D 1 J 4 6 1 D
D 1 J 4 7 1 D
D 1 J 4 8 1 D
D 1 J 4 9 1 D
D 1 J 5 0 1 D
D 1 J 5 1 1 D
D 1 J 5 2 1 D
D 1 J 5 3 1 D
D 1 J 5 4 1 D
D 1 J 5 5 1 D
D 1 J 1 2 1 D 5
D 1 J 1 8 1 D 5
D 1 J 2 8 1 D 5
D 1 J 1 0 1 D 5
Vset
0.8V
0.9V
1.0V
1.1V
1.2V
1.3V
1.4V
1.5V
1.6V
1.7V
1.8V
1.9V
2.0V
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.8V
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
3.6V
3.7V
3.8V
3.9V
4.0V
4.1V
4.2V
4.3V
4.4V
4.5V
4.6V
4.7V
4.8V
4.9V
5.0V
5.1V
5.2V
5.3V
5.4V
5.5V
1.25V
1.85V
2.85V
1.05V
35
1.The products and the product specifications described in this document are subject to change or
discontinuation of production without notice for reasons such as improvement. Therefore, before deciding
to use the products, please refer to Ricoh sales representatives for the latest information thereon.
2.The materials in this document may not be copied or otherwise reproduced in whole or in part without
prior written consent of Ricoh.
3.Please be sure to take any necessary formalities under relevant laws or regulations before exporting or
otherwise taking out of your country the products or the technical information described herein.
4.The technical information described in this document shows typical characteristics of and example
application circuits for the products. The release of such information is not to be construed as a warranty
of or a grant of license under Ricoh's or any third party's intellectual property rights or any other rights.
5.The products listed in this document are intended and designed for use as general electronic
components in standard applications (office equipment, telecommunication equipment, measuring
instruments, consumer electronic products, amusement equipment etc.). Those customers intending to
use a product in an application requiring extreme quality and reliability, for example, in a highly specific
application where the failure or misoperation of the product could result in human injury or death
(aircraft, spacevehicle, nuclear reactor control system, traffic control system, automotive and
transportation equipment, combustion equipment, safety devices, life support system etc.) should first
contact us.
6.We are making our continuous effort to improve the quality and reliability of our products, but
semiconductor products are likely to fail with certain probability. In order to prevent any injury to
persons or damages to property resulting from such failure, customers should be careful enough to
incorporate safety measures in their design, such as redundancy feature, fire containment feature and
fail-safe feature. We do not assume any liability or responsibility for any loss or damage arising from
misuse or inappropriate use of the products.
7.Anti-radiation design is not implemented in the products described in this document.
8.Please contact Ricoh sales representatives should you have any questions or comments concerning
the products or the technical information.
Ricoh is committed to reducing the environmental loading materials in electrical devices
with a view to contributing to the protection of human health and the environment.
Ricoh has been providing RoHS compliant products since April 1, 2006 and Halogen-free products since
Halogen Free
April 1, 2012.
http://www.e-devices.ricoh.co.jp/en/
Sales & Support Offices
RICOH ELECTRONIC DEVICES CO., LTD.
Higashi-Shinagawa Office (International Sales)
3-32-3, Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-8655, Japan
Phone: +81-3-5479-2857 Fax: +81-3-5479-0502
RICOH EUROPE (NETHERLANDS) B.V.
Semiconductor Support Centre
Prof. W.H. Keesomlaan 1, 1183 DJ Amstelveen, The Netherlands
Phone: +31-20-5474-309
RICOH INTERNATIONAL B.V. - German Branch
Semiconductor Sales and Support Centre
Oberrather Strasse 6, 40472 Düsseldorf, Germany
Phone: +49-211-6546-0
RICOH ELECTRONIC DEVICES KOREA CO., LTD.
3F, Haesung Bldg, 504, Teheran-ro, Gangnam-gu, Seoul, 135-725, Korea
Phone: +82-2-2135-5700 Fax: +82-2-2051-5713
RICOH ELECTRONIC DEVICES SHANGHAI CO., LTD.
Room 403, No.2 Building, No.690 Bibo Road, Pu Dong New District, Shanghai 201203,
People's Republic of China
Phone: +86-21-5027-3200 Fax: +86-21-5027-3299
RICOH ELECTRONIC DEVICES CO., LTD.
Taipei office
Room 109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)
Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623
相关型号:
RP131L111B-TR
Fixed Positive LDO Regulator, 1.1V, 1.42V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND ROHS COMPLIANT, DFN-6
RICOH
RP131L111D-TR
Fixed Positive LDO Regulator, 1.1V, 1.42V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND ROHS COMPLIANT, DFN-6
RICOH
RP131L121B5-TR
Fixed Positive LDO Regulator, 1.25V, 1.38V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND ROHS COMPLIANT, DFN-6
RICOH
RP131L121D-TR
Fixed Positive LDO Regulator, 1.2V, 1.38V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND ROHS COMPLIANT, DFN-6
RICOH
RP131L121D5-TR
Fixed Positive LDO Regulator, 1.25V, 1.38V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND ROHS COMPLIANT, DFN-6
RICOH
RP131L131B-TR
Fixed Positive LDO Regulator, 1.3V, 1.38V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND ROHS COMPLIANT, DFN-6
RICOH
RP131L131D-TR
Fixed Positive LDO Regulator, 1.3V, 1.38V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND ROHS COMPLIANT, DFN-6
RICOH
©2020 ICPDF网 联系我们和版权申明