RP170Q432B-TR-FE [RICOH]
Fixed Positive LDO Regulator, 4.3V, CMOS, PDSO5, SC-88A, 5 PIN;型号: | RP170Q432B-TR-FE |
厂家: | RICOH ELECTRONICS DEVICES DIVISION |
描述: | Fixed Positive LDO Regulator, 4.3V, CMOS, PDSO5, SC-88A, 5 PIN 光电二极管 输出元件 调节器 |
文件: | 总23页 (文件大小:639K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RP170x SERIES
300mA 10V INPUT LDO REGULATOR
OUTLINE
NO.EA-205-130418
The RP170x Series are CMOS-based LDO regulators featuring 300mA output current. Because of the 10V
maximum input voltage, RP170x can be used in 2 cell lithium-ion battery powered portable appliances and
besides a portable equipment. The supply current is Typ. 23μA though an excellent response characteristics.
The output voltage range from 1.2V is possible. The output voltage accuracy and temperature-drift coefficient
of output voltage of the RP170x Series are excellent.
RP170x has a fold-back protection circuit and a thermal shutdown circuit. Moreover, a standby mode with ultra
low supply current can be realized with the chip enable function.
SC-88A (Non-promotion), SOT-23-5 and SOT-89-5 with high power dissipation packages are available.
FEATURES
• Supply Current .............................................................Typ. 23μA
• Standby Mode ..............................................................Typ. 0.1μA
• Dropout Voltage............................................................Typ. 0.20V (IOUT=100mA, VOUT=3.0V)
Typ. 0.77V (IOUT=300mA, VOUT=2.8V)
• Ripple Rejection ...........................................................Typ. 70dB (f=1kHz)
• Temperature-Drift Coefficient of Output Voltage ..........Typ. ±80ppm/°C
• Line Regulation ............................................................Typ. 0.02%/V
• Output Voltage Accuracy..............................................±1.0%
• Packages......................................................................SC-88A (Non-promotion), SOT-23-5, SOT-89-5
• Input Voltage Range.....................................................2.6V to 10.0V
• Output Voltage Range..................................................1.2V to 6.0V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
• Built-in Fold Back Protection Circuit.............................Typ. 40mA (Current at short mode)
• Built-in Thermal Shutdown Circuit................................Shutdown Temperature at 165°C
• Ceramic capacitors are recommended to be used with this IC .... 1.0μF or more
APPLICATIONS
• Power source for portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
• Power source for home appliances.
1
RP170x
BLOCK DIAGRAMS
RP170xxxxB
RP170xxxxD
V
DD
V
DD
VOUT
V
OUT
Vref
Vref
Current Limit
Current Limit
Thermal Shutdown
Thermal Shutdown
CE
CE
GND
GND
SELECTION GUIDE
The output voltage, auto discharge function, and package for the ICs can be selected at the user’s request.
Product Name
Package
Quantity per Reel
Pb Free
Halogen Free
SC-88A
(Non-promotion)
3,000 pcs
Yes
Yes
RP170Qxx2∗-TR-FE
SOT-23-5
SOT-89-5
3,000 pcs
1,000 pcs
Yes
Yes
Yes
Yes
RP170Nxx1∗-TR-FE
RP170Hxx1∗-T1-FE
xx: The output voltage can be designated in the range from 1.2V(12) to 6.0V(60) in 0.1V steps.
(For other voltages, please refer to MARK INFORMATIONS.)
∗ : The auto discharge function at off state are options as follows.
(B) without auto discharge function at off state
(D) with auto discharge function at off state
The products scheduled to be discontinued : "Non-promotion"
These products will be discontinued in the future. We advise you to select other products.
2
RP170x
PIN CONFIGURATIONS
• SC-88A
• SOT-23-5
• SOT-89-5
5
4
5
4
5
4
(marside)
(mark side)
1
2
3
1
2
3
1
2
3
PIN DESCRIPTIONS
• SC-88A (Non-promotion)
Pin No
Symbol
Pin Description
1
2
3
4
5
CE
NC
Chip Enable Pin ("H" Active)
No Connection
Ground Pin
GND
VOUT
VDD
Output Pin
Input Pin
• SOT-23-5
Pin No
Symbol
VDD
Pin Description
1
2
3
4
5
Input Pin
GND
CE
Ground Pin
Chip Enable Pin ("H" Active)
No Connection
Output Pin
NC
VOUT
• SOT-89-5
Pin No
Symbol
VOUT
GND
CE
Pin Description
1
2
3
4
5
Output Pin
Ground Pin
Chip Enable Pin ("H" Active)
No Connection
Input Pin
NC
VDD
3
RP170x
ABSOLUTE MAXIMUM RATINGS
Symbol
Item
Rating
12
Unit
V
VIN
Input Voltage
VCE
Input Voltage (CE Pin)
Output Voltage
Output Current
12
V
VOUT
IOUT
V
−0.3 to VIN+0.3
330
mA
Power Dissipation∗ (SC-88A) (Non-promotion)
Power Dissipation∗ (SOT-23-5)
Power Dissipation∗ (SOT-89-5)
Operating Temperature Range
380
PD
mW
420
900
Topt
Tstg
−40 to 85
−55 to 125
°C
°C
Storage Temperature Range
∗) For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field.
The functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
4
RP170x
ELECTRICAL CHARACTERISTICS
• RP170xxxxB/D
VIN=Set VOUT+1V, IOUT=1mA, unless otherwise noted.
values indicate −40°C ≤ Topt ≤ 85°C, unless otherwise noted.
Topt=25°C
Symbol
Item
Conditions
Min.
×0.99
−15
Typ.
Max.
×1.01
+15
Unit
V
VOUT > 1.5V
VOUT ≤ 1.5V
VOUT > 1.5V
Topt=25°C
mV
V
VOUT
Output Voltage
×0.974
×1.023
−40°C ≤ Topt ≤ 85°C
VOUT ≤ 1.5V
mV
mA
mV
−40
+35
IOUT
Output Current
300
Load Regulation
0.1mA ≤ IOUT ≤ 300mA
10
70
ΔVOUT/ΔIOUT
1.2V ≤ VOUT < 1.3V
1.3V ≤ VOUT < 1.5V
1.5V ≤ VOUT < 1.8V
1.8V ≤ VOUT < 2.3V
2.3V ≤ VOUT < 3.0V
3.0V ≤ VOUT < 4.0V
4.0V ≤ VOUT ≤ 6.0V
1.400 1.800
1.350 1.750
1.200 1.550
0.980 1.300
0.770 1.080
0.600 0.850
0.500 0.750
VDIF
Dropout Voltage
V
IOUT=300mA
ISS
Supply Current
Standby Current
23
40
IOUT=0mA
μA
μA
Istandby
0.1
1.0
VIN=10.0V, VCE=GND
Set VOUT+0.5V ≤ VIN ≤ 10.0V
(In case that VOUT ≤ 2.1V,
2.6V ≤ VIN ≤ 10.0V)
Line Regulation
0.02
70
0.2
10
%/V
ΔVOUT/ΔVIN
f=1kHz, Ripple 0.2Vp-p, IOUT=30mA
(In case that VOUT < 2.0V, VIN=3.0V)
RR
VIN
Ripple Rejection
Input Voltage
dB
V
2.6
1.7
Output Voltage
Temperature Coefficient
ΔVOUT/ΔTopt
−40°C ≤ Topt ≤ 85°C
VOUT=0V
±80
ppm/°C
ISC
IPD
Short Current Limit
CE Pull-down Current
CE Input Voltage "H"
CE Input Voltage "L"
40
mA
μA
V
0.30
VCEH
VCEL
0.8
V
Thermal Shutdown
Temperature
TTSD
Junction Temperature
165
°C
Thermal Shutdown
Released Temperature
TTSR
Junction Temperature
110
100
°C
en
Output Noise
BW=10Hz to 100kHz
μVrms
Low Output Nch Tr.
ON Resistance
(of D version)
VIN=7.0V
VCE=0V
RLOW
250
Ω
All of unit are tested and specified under load conditions such that Tj≈Topt=25°C except for Output Noise, Ripple
Rejection, Output Voltage Temperature Coefficient and Thermal Shutdown.
5
RP170x
TYPICAL APPLICATION
VDD
VOUT
VOUT
RP170x
Series
C1
C2
CE GND
(External Components)
C2 1.0μF MURATA: GRM155B31A105KE15
TECHNICAL NOTES
When using these ICs, consider the following points:
Phase Compensation
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, use a capacitor C2 with 1.0μF or more and good ESR (Equivalent Series Resistance).
(Note: If additional ceramic capacitors are connected with parallel to the output pin with an output capacitor for
phase compensation, the operation might be unstable. Because of this, test these ICs with as same external
components as ones to be used on the PCB.)
PCB Layout
Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.
Connect a capacitor C1 with a capacitance value as much as 1.0μF or more between VDD and GND pin, and as
close as possible to the pins.
Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring
as short as possible.
6
RP170x
TEST CIRCUITS
VDD
VOUT
RP170x
Series
V
C1
C2
I
OUT
VOUT
CE
GND
C1=Ceramic 1.0μF
C2=Ceramic 1.0μF
Basic Test Circuit
VOUT
V
DD
V
OUT
RP170x
Series
A
C1
C2
ISS
CE GND
C1=Ceramic 1.0μF
C2=Ceramic 1.0μF
Test Circuit for Supply Current
Pulse
Generator
V
DD
V
OUT
RP170x
Series
C2
IOUT
P.G.
CE GND
C2=Ceramic 1.0μF
Test Circuit for Ripple Rejection
V
OUT
V
DD
VOUT
RP170x
Series
C1
C2
CE
GND
IOUTa
IOUTb
C1=Ceramic 1.0μF
C2=Ceramic 1.0μF
Test Circuit for Load Transient Response
7
RP170x
TYPICAL CHARACTERISTICS
1) Output Voltage vs. Output Current (Topt=25°C)
RP170x12xx
RP170x30xx
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
VIN=2.6V
VIN=3.0V
VIN=4.0V
VIN=3.3V
VIN=3.6V
VIN=4.0V
VIN=5.0V
0
100
200
300
400
500
600
0
100
200
300
400
500
600
Output Current IOUT (mA)
Output Current IOUT (mA)
RP170x60xx
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
VIN=6.3V
VIN=6.6V
VIN=7.0V
VIN=8.0V
0
100
200
300
400
500
600
Output Current IOUT (mA)
2) Output Voltage vs. Input Voltage (Topt=25°C)
RP170x12xx
RP170x30xx
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1.6
1.4
1.2
1.0
0.8
IOUT=1mA
IOUT=1mA
0.6
IOUT=10mA
IOUT=50mA
IOUT=150mA
IOUT=300mA
IOUT=10mA
0.4
IOUT=50mA
IOUT=150mA
0.2
IOUT=300mA
0.0
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
Input Voltage VIN (V)
Input Voltage VIN (V)
8
RP170x
RP170x60xx
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
IOUT=1mA
IOUT=10mA
IOUT=50mA
IOUT=150mA
IOUT=300mA
0
1
2
3
4
5
6
7
8
9
10
Input Voltage V (V)
IN
3) Supply Current vs. Input Voltage (Topt=25°C)
RP170x12xx
RP170x30xx
40
40
35
30
25
20
15
10
5
35
30
25
20
15
10
5
0
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN (V)
Input Voltage VIN (V)
RP170x60xx
40
35
30
25
20
15
10
5
0
0
1
2
3
4
5
6
7
8
9
10
Input Voltage V (V)
IN
9
RP170x
4) Supply Current vs. Output Current (Topt=25°C)
RP170x
160
140
120
100
80
60
40
20
0
0
50
100
150
200
250
300
Output Current IOUT (mA)
5) Output Voltage vs. Temperature
RP170x12xx
RP170x30xx
3.10
3.08
3.06
3.04
3.02
3.00
2.98
2.96
2.94
2.92
2.90
1.25
1.24
1.23
1.22
1.21
1.20
1.19
1.18
1.17
1.16
1.15
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature Topt (°C)
Temperature Topt (°C)
RP170x60xx
6.20
6.16
6.12
6.08
6.04
6.00
5.96
5.92
5.88
5.84
5.80
-50
-25
0
25
50
75
100
Temperature Topt (°C)
10
RP170x
6) Supply Current vs. Temperature
RP170x12xx
RP170x30xx
40
35
30
25
20
15
10
5
40
35
30
25
20
15
10
5
0
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature Topt (°C)
Temperature Topt (°C)
RP170x60xx
40
35
30
25
20
15
10
5
0
-50
-25
0
25
50
75
100
Temperature Topt (°C)
7) Dropout Voltage vs. Output Current
RP170x12xx
RP170x30xx
1.6
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
1.4
1.2
1.0
0.8
85°C
25°C
-40°C
85°C
25°C
-40°C
0.6
0.4
0.2
0.0
0
50
100
150
200
(mA)
250
300
0
50
100
150
200
250
300
Output Current I
OUT
Output Current I
(mA)
OUT
11
RP170x
RP170x60xx
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
85°C
25°C
-40°C
0
50
100
150
200
250
300
Output Current I
(mA)
OUT
8) Dropout Voltage vs. Set Output Voltage (Topt=25°C)
RP170x
0.90
10mA
30mA
50mA
100mA
150mA
300mA
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
1
2
3
4
5
6
Set Output Voltage VREG (V)
9) Minimum Operating Voltage
RP170x12xx
3.20
3.00
2.80
2.60
2.40
2.20
2.00
Hatched area is avaiable
for 1.2V output
0
50
100
150
200
250
300
Output Current IOUT (mA)
12
RP170x
10) Ripple Rejection vs. Input Bias Voltage (C1
RP170x30xx
=
none, C2
=
Ceramic 1.0
μ
F, Ripple
=
0.2Vp-p, Topt=25°C)
RP170x30xx
IOUT=1mA
IOUT=30mA
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
f=300Hz
f=1kHz
f=100Hz
f=1kHz
f=10kHz
f=10kHz
f=100kHz
f=100kHz
3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0
3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0
Input Voltage V (V)
Input Voltage V (V)
IN
IN
IOUT=100mA
RP170x30xx
100
90
80
70
60
50
40
30
20
10
0
f=300Hz
f=1kHz
f=10kHz
f=100kHz
3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0
Input Voltage V (V)
IN
11) Ripple Rejection vs. Frequency (C1=none, C2=Ceramic 1.0μF, Topt=25°C)
RP170x12xx RP170x12xx
VIN=2.6VDC+0.2Vp-p
VIN=3.0VDC+0.2Vp-p
120
110
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
IOUT=1mA
IOUT=1mA
IOUT=30mA
IOUT=100mA
IOUT=30mA
IOUT=100mA
0.1
1
10
100
0.1
1
10
100
Frequency f (kHz)
Frequency f (kHz)
13
RP170x
RP170x30xx
RP170x30xx
V
IN=4.0VDC+0.2Vp-p
VIN=5.0VDC+0.2Vp-p
110
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
IOUT=1mA
IOUT=1mA
IOUT=30mA
IOUT=100mA
IOUT=30mA
IOUT=100mA
0.1
1
10
100
0.1
1
10
100
Frequency f (kHz)
Frequency f (kHz)
RP170x60xx
RP170x60xx
VIN=8.0VDC+0.2Vp-p
VIN=7.0VDC+0.2Vp-p
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
IOUT=1mA
IOUT=1mA
IOUT=30mA
IOUT=100mA
IOUT=30mA
IOUT=100mA
0.1
1
10
100
0.1
1
10
100
Frequency f (kHz)
Frequency f (kHz)
12) Input Transient Response (C1=none, IOUT=30mA, tr=tf=5μs, Topt=25°C)
RP170x12xx RP170x12xx
C2=Ceramic 1.0μF
C2=Ceramic 2.2μF
1.22
1.20
1.18
1.16
5
1.22
1.20
1.18
1.16
5
4
4
3
3
Input Voltage
Input Voltage
2
2
1
1
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
Time t (μs)
Time t (μs)
14
RP170x
RP170x30xx
RP170x30xx
C2=Ceramic 2.2μF
C2=Ceramic 1.0μF
3.02
3.00
2.98
2.96
6
3.02
3.00
2.98
2.96
6
5
5
4
4
Input Voltage
Input Voltage
3
3
2
2
1
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
Time t (μs)
Time t (μs)
RP170x60xx
RP170x60xx
C2=Ceramic 2.2μF
C2=Ceramic 1.0μF
6.02
6.00
5.98
5.96
9
8
7
6
5
6.02
6.00
5.98
5.96
9
8
7
6
5
Input Voltage
Input Voltage
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
Time t (μs)
Time t (μs)
13) Load Transient Response (C1=Ceramic 1.0μF, tr=tf=500ns, Topt=25°C)
RP170x12xx RP170x12xx
1
1
1
1
1
1.3
1.2
1.1
1.0
60
1.3
1.2
1.1
1.0
150
100
50
30
0
↔
Output Current : 0mA 30mA
↔
Output Current : 50mA 100mA
0
C2=1.0μF
C2=2.2μF
C2=1.0μF
C2=2.2μF
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80
0
10 20 30 40 50 60 70 80
Time t (μs)
Time t (μs)
15
RP170x
RP170x12xx
RP170x12xx
1.4
1.2
1.0
0.8
300
150
0
600
300
0
↔
↔
Output Current : 1mA 300mA
Output Current : 1mA 150mA
C2=1.0μF
C2=2.2μF
C2=1.0μF
C2=2.2μF
1.6
1.2
0.8
0.4
Output Voltage
Output Voltage
0
20 40 60 80 100 120 140 160
0
20 40 60 80 100 120 140 160
Time t (μs)
Time t (μs)
RP170x30xx
RP170x30xx
60
3.1
3.0
2.9
2.8
150
100
50
3.1
3.0
2.9
2.8
30
0
↔
Output Current : 0mA 30mA
↔
Output Current : 50mA 100mA
0
C2=1.0μF
C2=2.2μF
C2=1.0μF
C2=2.2μF
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80
0
10 20 30 40 50 60 70 80
Time t (μs)
Time t (μs)
RP170x30xx
RP170x30xx
3.4
3.0
2.6
2.2
300
150
0
3.8
3.0
2.2
1.4
600
300
0
↔
Output Current : 1mA 150mA
↔
Output Current : 1mA 300mA
C2=1.0μF
C2=2.2μF
C2=1.0μF
C2=2.2μF
Output Voltage
Output Voltage
0
20 40 60 80 100 120 140 160
0
20 40 60 80 100 120 140 160
Time t (μs)
Time t (μs)
16
RP170x
RP170x60xx
RP170x60xx
6.1
6.0
5.9
5.8
60
6.1
6.0
5.9
5.8
150
100
50
30
0
↔
↔
Output Current : 0mA 30mA
Output Current : 50mA 100mA
0
C2=1.0μF
C2=2.2μF
C2=1.0μF
C2=2.2μF
Output Voltage
Output Voltage
0
10 20 30 40 50 60 70 80
0
10 20 30 40 50 60 70 80
Time t (μs)
Time t (μs)
RP170x60xx
RP170x60xx
6.8
6.0
5.2
4.4
600
6.4
6.0
5.6
5.2
300
150
0
300
0
↔
Output Current : 1mA 300mA
↔
Output Current : 1mA 150mA
C2=1.0μF
C2=2.2μF
C2=1.0μF
C2=2.2μF
Output Voltage
Output Voltage
-
0
20 40 60 80 100 120 140 160
0
20 40 60 80 100 120 140 160
Time t (μs)
Time t (μs)
17
RP170x
14) Turn On Speed with CE pin (C1=Ceramic 1.0μF, Topt=25°C)
RP170x12xx
VIN=2.6V, C2=Ceramic1.0μF
RP170x30xx
VIN=4.0V, C2=Ceramic1.0μF
5
4
900
400
300
200
100
0
2.5
2.0
900
300
200
100
0
CE Input Voltage
Output Voltage
Output Voltage
3
1.5
CE Input Voltage
2
1.0
IOUT=0mA
IOUT=1mA
IOUT=30mA
IOUT=300mA
IOUT=0mA
IOUT=1mA
IOUT=30mA
IOUT=300mA
1
0.5
0
0.0
Inrush Current
Inrush Current
-100
-100
0
50
100
150
200 250
300
0
50
100 150 200 250 300
Time t (μs)
Time t (μs)
RP170x60xx
VIN=7.0V, C2=Ceramic1.0μF
10
400
300
200
100
0
8
6
Output Voltage
4
CE Input Voltage
2
IOUT=0mA
IOUT=1mA
IOUT=30mA
IOUT=300mA
0
Inrush Current
-100
0
50
100 150 200 250 300
Time t (μs)
18
RP170x
RP170x12xx
RP170x30xx
VIN=4.0V, IOUT=1mA
VIN=2.6V, IOUT=1mA
5
4
2.5
2
CE Input Voltage
Output Voltage
Output Voltage
3
1.5
1
CE Input Voltage
2
C2=1.0μF
C2=2.2μF
C2=4.7μF
C2=10μF
C2=1.0μF
C2=2.2μF
C2=4.7μF
C2=10μF
1
0.5
0
0
600
600
400
400
Inrush Current
Inrush Current
200
200
0
0
-200
-200
0
50
100
150 200
250 300
0
50
100 150 200 250 300
Time t (μs)
Time t (μs)
RP170x60xx
VIN=7.0V, IOUT=1mA
10
1800
800
8
Output Voltage
6
4
CE Input Voltage
2
C2=1.0μF
C2=2.2μF
C2=4.7μF
C2=10μF
0
600
Inrush Current
400
200
0
-200
0
50
100 150 200 250 300
Time t (μs)
19
RP170x
RP170x12xx
IOUT=1mA, C2=Ceramic1.0μF
RP170x30xx
IOUT=1mA, C2=Ceramic1.0μF
5
4
300
200
100
0
2.5
2.0
300
200
100
0
CE Input Voltage
Output Voltage
Output Voltage
3
1.5
CE Input Voltage
2
1.0
VIN=2.6V
VIN=4V
1
0.5
VIN=4V
VIN=6V
VIN=10V
VIN=10V
0
0.0
Inrush Current
Inrush Current
-100
-100
0
50
100
150
200 250
300
0
50
100 150 200 250 300
Time t (μs)
Time t (μs)
RP170x60xx
IOUT=1mA, C2=Ceramic1.0μF
10
8
300
200
100
0
Output Voltage
6
4
CE Input Voltage
2
0
VIN=7V
VIN=8V
VIN=10V
2
Inrush Current
-100
0
50
100 150 200 250 300
Time t (μs)
20
RP170x
15) Turn Off Speed with CE pin (D Version) (C1=Ceramic 1.0μF, Topt=25°C)
RP170x121D RP170x301D
VIN=2.6V
VIN=4.0V
1.2
0.8
0.4
0.0
-0.4
4
4
2
2
CE Input Voltage
CE Input Voltage
0
0
IOUT=0mA
IOUT=1mA
IOUT=30mA
IOUT=300mA
3
IOUT=0mA
IOUT=1mA
IOUT=30mA
IOUT=300mA
2
1
0
Output Voltage
Output Voltage
-1
0.0
0.5
1.0
1.5
2.0
2.5
0.0
0.5
1.0
1.5
2.0
2.5
Time t (ms)
Time t (ms)
RP170x601D
VIN=7.0V
4
2
CE Input Voltage
0
6
IOUT=0mA
IOUT=1mA
IOUT=30mA
IOUT=300mA
4
2
0
Output Voltage
-2
0.0
0.5
1.0
1.5
2.0
2.5
Time t (ms)
21
RP170x
ESR vs. Output Current
Ceramic type output capacitor is recommended for this series; however, the other output capacitors with low
ESR also can be used. The relations between IOUT (Output Current) and ESR of an output capacitor are shown
below. The conditions when the white noise level is under 40μV (Avg.) are marked as the hatched area in the
graph.
Measurement conditions
Frequency Band : 10Hz to 2MHz
Temperature
C1, C2
: −40°C to 85°C
: Ceramic 1.0μF (Murata GRM155B31A105KE)
RP170x12xx
RP170x30xx
VIN=3.0V to 10.0V
Topt=-40, 85°C
VIN=2.6V to 10.0V
1000
1000
100
10
Topt=-40, 85°C
100
10
1
1
0.1
0.01
0.1
0.01
0
0
50
100
150
200
250
300
50
100
150
200
250
300
OUT
Output Current I
(mA)
OUT
Output Current I
(mA)
RP170x60xx
VIN=6.0V to 10.0V
Topt=-40, 85°C
1000
100
10
1
0.1
0.01
0
50
100
150
200
250
300
OUT
Output Current I
(mA)
22
1.The products and the product specifications described in this document are subject to change or
discontinuation of production without notice for reasons such as improvement. Therefore, before
deciding to use the products, please refer to Ricoh sales representatives for the latest
information thereon.
2.The materials in this document may not be copied or otherwise reproduced in whole or in part
without prior written consent of Ricoh.
3.Please be sure to take any necessary formalities under relevant laws or regulations before
exporting or otherwise taking out of your country the products or the technical information
described herein.
4.The technical information described in this document shows typical characteristics of and
example application circuits for the products. The release of such information is not to be
construed as a warranty of or a grant of license under Ricoh's or any third party's intellectual
property rights or any other rights.
5.The products listed in this document are intended and designed for use as general electronic
components in standard applications (office equipment, telecommunication equipment,
measuring instruments, consumer electronic products, amusement equipment etc.). Those
customers intending to use a product in an application requiring extreme quality and reliability,
for example, in a highly specific application where the failure or misoperation of the product
could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system,
traffic control system, automotive and transportation equipment, combustion equipment, safety
devices, life support system etc.) should first contact us.
6.We are making our continuous effort to improve the quality and reliability of our products, but
semiconductor products are likely to fail with certain probability. In order to prevent any injury to
persons or damages to property resulting from such failure, customers should be careful enough
to incorporate safety measures in their design, such as redundancy feature, firecontainment
feature and fail-safe feature. We do not assume any liability or responsibility for any loss or
damage arising from misuse or inappropriate use of the products.
7.Anti-radiation design is not implemented in the products described in this document.
8.Please contact Ricoh sales representatives should you have any questions or comments
concerning the products or the technical information.
For the conservation of the global environment, Ricoh is advancing the decrease of the negative environmental impact material.
After Apr. 1, 2006, we will ship out the lead free products only. Thus, all products that will be shipped from now on comply with RoHS Directive.
Basically after Apr. 1, 2012, we will ship out the Power Management ICs of the Halogen Free products only. (Ricoh Halogen Free products are
also Antimony Free.)
Halogen Free
RICOH COMPANY, LTD.
Electronic Devices Company
http://www.ricoh.com/LSI/
RICOH COMPANY, LTD.
Electronic Devices Company
● Higashi-Shinagawa Office (International Sales)
3-32-3, Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-8655, Japan
Phone: +81-3-5479-2857 Fax: +81-3-5479-0502
RICOH EUROPE (NETHERLANDS) B.V.
● Semiconductor Support Centre
“Nieuw Kronenburg”Prof. W.H. Keesomlaan 1, 1183 DJ, Amstelveen, The Netherlands
P.O.Box 114, 1180 AC Amstelveen
Phone: +31-20-5474-309 Fax: +31-20-5474-791
RICOH ELECTRONIC DEVICES KOREA Co., Ltd.
11 floor, Haesung 1 building, 942, Daechidong, Gangnamgu, Seoul, Korea
Phone: +82-2-2135-5700 Fax: +82-2-2135-5705
RICOH ELECTRONIC DEVICES SHANGHAI Co., Ltd.
Room403, No.2 Building, 690#Bi Bo Road, Pu Dong New district, Shanghai 201203,
People's Republic of China
Phone: +86-21-5027-3200 Fax: +86-21-5027-3299
RICOH COMPANY, LTD.
Electronic Devices Company
● Taipei office
Room109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)
Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623
相关型号:
©2020 ICPDF网 联系我们和版权申明