1MD04-003-05 [RMT]
Thermoelectric module; 热电模块
| 型号： | 1MD04-003-05 |
| 厂家： | 
RMT Ltd. |
| 描述： | Thermoelectric module |
| 文件： | 总4页 (文件大小：243K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thermoelectric module Datasheet
RMT Ltd.
Performance parameters
Qmax Imax Umax AC R
H
h
DTmax
Type
W
A
V
Ohm mm mm
K
1MD04-003-xx (N=3)
1MD04-003-05
1MD04-003-08
1MD04-003-10
1MD04-003-12
1MD04-003-15
70
71
72
72
72
0.31
0.20
0.16
0.14
1.5
1.0
0.8
0.7
0.19 1.1
0.31 1.4
0.5
0.8
1.0
1.2
1.5
0.35 0.38 1.6
0.46 1.8
0.11 0.60
0.57 2.1
Perfomance data are given for Thot=300K vacuum
Technical Drawing
Ordering Options
A. TEC Internal Solder:
C. Surface Finish (one or both)
1. Blank Ceramics
D. Thermistor (optional)
NTC thermistor type TB
Resistance nominal
Lead-free SnSb Solder (Tmelt=230°C)
2. Metallized:
2.1 Ni-Sn plaiting
2.2 Au plaiting
1. 2.2 kOhm@20C
2 10.0 kOhm@20C
B. TEC Ceramics:
1. Pure Al2O3 (100%)
2. Alumina (Al2O3 96%)
3. Metallized and Pre-tinned
3.1 Solder 94 (PbSnBi,Tmelt=94°C)
3.2 Solder 117 (InSn,Tmelt=117°C)
3.3 Solder 138 (SnBi,Tmelt=138°C)
3.4 Solder 183 (PbSn,Tmelt=183°C)
3.5 Solder 199 (SnZn, Tmelt=199°C)
Individual calibration is
avaiable in -65..+85°C
3. Aluminium Nitride (AlN)
Copyright 2007. RMT Ltd. The design and specications of products can be changed by RMT Ltd. without notice.
2
Thermoelectric module Datasheet
RMT Ltd.
1MD04-003-05
Standard Performance Plots
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
1MD04-003-08
Standard Performance Plots
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Perfomance plots are created with TECCAD Software. TECCAD is available for download from RMT Ltd. website - www.rmtltd.ru
Copyright 2007. RMT Ltd. The design and specications of products can be changed by RMT Ltd. without notice.
3
Thermoelectric module Datasheet
RMT Ltd.
1MD04-005-10
Standard Performance Plots
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
1MD04-003-12
Standard Performance Plots
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Perfomance plots are created with TECCAD Software. TECCAD is available for download from RMT Ltd. website - www.rmtltd.ru
Copyright 2007. RMT Ltd. The design and specications of products can be changed by RMT Ltd. without notice.
4
Thermoelectric module Datasheet
RMT Ltd.
1MD04-003-15
Standard Performance Plots
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Applications Tips
Cautions
1. Do not heat TE module more than 200oC (TEC assembled
at 230oC) or 160oC (optional TECs assembled at 183oC).
2. Do not use TE module without attached heat sink at hot
(bottom) side.
3. Connect TE sub-mount to a DC power supply in
acccordance to polarity.
4. Do not apply DC current higher than Imax.
Installation
1. Mechanical Mounting
TEC is placed between two heat exchangers . This construction is xed by screws or in another mechanical way. It is suitable for large
modules (with dimensions 30mmx30mm and larger). Miniature types require other assembling methods.
2. Soldering
This method is suitable for a TE module with metallized outside surfaces (cold and hot sides). RMT provides this option and also
makes pre-tinning for TE modules. In comparison with a mechanical assembling method, soldering requires careful procedures.
3. Glueing
A glue is usually based on some epoxy compound lled with some thermoconductive material such as graphite or diamond powders,
silver, SiN and others. The application of a specic type depends on application features and the type of a TE module.
Denitions
Value
Description
Notes
Maximum temperature difference at I=Imax rated at Qmax=0, at other Q it should be estimated as DT=DTmax(1-Q/Qmax)
DTmax
Qmax Maximum heat pumping capacity at I=Imax rated at DT=0, at other DT it should be estimated as Q=Qmax(1-DT/DTmax)
Imax Maximum current
Umax Maximum voltage drop
Electric parameters resulting in greatest DTmax
Rt
Header thermal resistance
-xx
Thermoelectric pellet length code
Pellet length is "-xx" x 10 (in mm)
Thot TEC hot side temperature
Total TEC height
Performance data shown in specications are given for Thot=300 K, vacuum
All dimensions are given in mm
H
Copyright 2007. RMT Ltd. The design and specications of products can be changed by RMT Ltd. without notice.
5
相关型号：
©2020 ICPDF网 联系我们和版权申明