1MDL06-052-12AN25 [RMT]
Blank ceramics (not metallized) Metallized (Au plating) Blank, tinned Copper; 空白陶瓷(没有金属)金属化(镀金)空白,镀锡铜型号: | 1MDL06-052-12AN25 |
厂家: | RMT Ltd. |
描述: | Blank ceramics (not metallized) Metallized (Au plating) Blank, tinned Copper |
文件: | 总8页 (文件大小:2824K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thermoelectric Cooling Solutions
Performance Parameters
1MDL06-052-xxAN25
ΔTmax Qmax
Imax
A
Umax AC R
H
Type
K
W
V
Ohm mm
1MDL06-052-xxAN25 (N=52)
1MDL06-052-03AN25
1MDL06-052-05AN25
1MDL06-052-07AN25
1MDL06-052-09AN25
1MDL06-052-12AN25
1MDL06-052-15AN25
70
72
73
73
73
74
21.38
13.34
9.68
7.60
5.74
4.63
5.4
3.3
2.4
1.9
1.4
1.1
0.92
1.49
2.06
2.63
3.49
4.34
0.9
1.1
1.3
1.5
1.8
2.1
6.5
Performance data are given for 300K, vacuum
Dimensions
Manufacturing options
A. TEC Assembly:
C. Ceramics Surface Options:
D. Thermistor (optional)
Can be mounted to cold side
ceramics edge. Calibration is
* 1. Solder SnSb (Tmelt=230°C)
2. Solder AuSn (Tmelt=280°C)
1. Blank ceramics (not metallized)
2. Metallized (Au plating)
available by request.
3. Metallized and pre-tinned with:
3.1 Solder 117 (In-Sn, Tmelt =117°C)
3.2 Solder 138 (Sn-Bi, Tmelt = 138°C)
3.3 Solder 143 (In-Ag, Tmelt = 143°C)
B. Ceramics:
E. Terminal contacts
1. Blank, tinned Copper
2. Insulated Wires
1.Pure Al2O3(100%)
2.Alumina (Al2O3- 96%)
* 3.Aluminum Nitride (AlN)
* - used by default
3.4 Solder 157 (In, Tmelt = 157°C)
3.5 Solder 183 (Pb-Sn, Tmelt =183°C)
3.6 Optional (specified by Customer)
3. Insulated, color coded
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 8
Thermoelectric Cooling Solutions
1MDL06-052-03AN25
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MDL06-052-03AN25
1MDL06-052-03AN25
70
21.38
5.4
6.5
76
23.41
5.4
7.2
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink
thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
1MDL06-052-05AN25
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MDL06-052-05AN25
1MDL06-052-05AN25
72
13.34
3.3
6.5
78
14.56
3.3
7.2
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink
thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 2 of 8
Thermoelectric Cooling Solutions
1MDL06-052-07AN25
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MDL06-052-07AN25
1MDL06-052-07AN25
73
9.68
2.4
6.5
79
10.57
2.4
7.2
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink
thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
1MDL06-052-09AN25
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MDL06-052-09AN25
1MDL06-052-09AN25
73
7.60
1.9
6.5
79
8.29
1.9
7.2
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink
thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 3 of 8
Thermoelectric Cooling Solutions
1MDL06-052-12AN25
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MDL06-052-12AN25
1MDL06-052-12AN25
73
5.74
1.4
6.5
79
6.27
1.4
7.2
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink
thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
1MDL06-052-15AN25
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MDL06-052-15AN25
1MDL06-052-15AN25
74
4.63
1.1
6.6
79
5.05
1.1
7.2
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink
thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 4 of 8
Thermoelectric Cooling Solutions
Additional Options
TEC Polarity
TEC Polarity can be modified by request. The
specified polarity in this datasheet is typical.
It can be reversed in accordance to Customer
application requirements.
+
-
-
Standard polarity
Reversed polarity
+
Terminal Wires Options
The standard solution is with terminal wires. TEC
can be modified for WB process by request. In this
case terminal wires are not mounted, TEC has Au
plated WB pads.
Standard solution,
terminal wires
WB Solution, Au
played WB pads
Optimization for WB process
In case of WB optimization, the standard WB
solution is with WB pads (no posts) by default. WB
posts are available by request. The dimensions of
WB posts can be modified and optimized for
Customers application. WB posts are made of
Copper, Au plated.
WB posts
WB pads
Customized Au Patterns
Customized Au patterns on thermoelectric cooler
cold side are available by request. Selective Pre-
tinning over pattern is also available. Please,
contact RMT Ltd for additional information about
customized Au patterns requirements.
Customized Au pattern
on cold side
Selective pre-tinning
over pattern
TEC Height modification
Standard TEC height can be modified without
performance changes by using ceramics of
different thickness. Standard thermoelectric cooler
height (specified in this datasheet) can be
increased in a range +0.5..+1.5 mm by request.
Modified height,
another ceramics
Standard height
thickness
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 5 of 8
Thermoelectric Cooling Solutions
Thermoelectric Cooler Overview
Cold side Ceramics
(top side)
AlN Ceramics by default
(Al2O3 solution is available
by request)
TE Cooler Lead Free
Internal Assembly
(Lead-Free Solder 230,
Sn-Sb)
Pellets (BiTe posts)
TEC Polarity
(can be modified by
request)
Hot Side Ceramics
(bottom side)
-
+
Terminal Wires
(or WB pads by request)
Application Tips
1. Never heat TE module more than 200˚C (TEC
assembled at 230˚C).
1. Connect TE module to DC power supply according
to polarity.
2. Never use TE module without an attached heat sink
at hot (bottom) side.
2. Do not apply DC current higher than Imax.
Installation
1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or in
another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature types
require other assembling methods in most cases.
1. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this option
and also makes pre-tinning for TE modules.
2. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a
specific type depends on application features and the type of a TE module.
Object being cooled
Object being cooled
TEC
TEC
3
1
2
Screw mounting
Heatsink
Soldering
Heatsink
Gluing
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 6 of 8
Thermoelectric Cooling Solutions
Contacts
RMT Ltd. Headquarters
Warshavskoe sh. 46, 115230, Moscow
Russia
Phone: +7-499-678-2082
Fax: +7-499-678-2083
Web: www.rmtltd.ru
Email: info@rmtltd.ru
EUROPE/USA - TEC Microsystems GmbH
Schwarzschildstrasse 3, 12489 Berlin
Germany
Tel. +49 30 6789 3314
Fax+49 30 6789 3315
Web: www.tec-microsystems.com
Email: info@tec-microsystems.com
CHINA - ProTEC Ltd.
深
圳 良 路恒裕 中 心B座207
市南山区登
ꢀꢁ: +86-755-61596066
ꢂ真: +86-755-61596036
ꢃꢄ: 518054
Web: www.protecltd.com
Email: info@protecltd.com
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 7 of 8
Thermoelectric Cooling Solutions
Legal Notice
All logos, images, trademarks and product names (collectively Materials) are proprietary to RMT Ltd and/ or any
of its affiliates, or subsidiaries, or other respective owners that have granted RMT Ltd the permission and/or
license to use such Materials. All images are provided by RMT Ltd. and are subjects of copyright protection.
RMT Ltd, TEC Microsystems GmbH and ProTEC Ltd do not grant a copyright license (express or implied) to the
Recipient, except that Recipient may reproduce the logos, images and text materials in this press-release
without any alteration for non-promotional or editorial purposes only with a written note about materials owner.
Copyright protection warning
Graphic materials and text from this datasheet may not be used commercially without a prior response in
writing on company letterhead and signed by RMT Ltd authority. Thank you for respecting the intellectual
property rights protected by the International Copyright laws.
Warning: All datasheet images contain RMT Ltd hidden watermark for the immediate proof of their origin.
RMT Image
Hidden Watermark
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 8 of 8
相关型号:
©2020 ICPDF网 联系我们和版权申明