1ML06-029-09 [RMT]
Thermoelectric Module; 热电模块型号: | 1ML06-029-09 |
厂家: | RMT Ltd. |
描述: | Thermoelectric Module |
文件: | 总13页 (文件大小:927K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thermoelectric Module Datasheets
Thermoelectric module type 1ML06-029-xx is available in four different ceramics
versions. Cost-effective Al2O3 ceramics versions or high performance AlN ceramics
versions are available. Please, select the appropriate type to check the complete
datasheet.
1ML06-029-xx
1ML06-029-xxt
1ML06-029-xxAN025
1ML06-029-xxAN05
RMT Standard
Al2O3 0.5mm ceramics Al2O3 0.25mm ceramics
RMT Special Thin
RMT Standard AlN
0.25mm ceramics
version.
RMT Special
Version with thick AlN
0.5mm ceramics.
version.
version.
TEC total height from
1.6mm to 2.4mm
TEC total height from
1.1mm to 1.9mm
TEC total height from
1.1mm to 1.9mm
TEC total height from
1.6mm to 2.4mm
Thermoelectric Sub-Mounts (TEC + Package assembled) are available
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 1
Thermoelectric Module Datasheet
RMT Ltd
Performance Parameters
1ML06-029-XX
ΔTmax Qmax Imax
Umax AC R
H
h
mm
Type
K
W
A
V
Ohm mm
1ML06-029-xx (N=29) Al2O3 0.5mm ceramics version
1ML06-029-05
1ML06-029-09
1ML06-029-12
69
71
71
6.6
3.9
2.9
3.4
2.0
1.5
0.85
1.50
2.00
1.7
2.1
2.4
0.5
0.9
1.2
3.6
Performance data are given at 300K, vacuum
Technical Drawing
Options available
A. TEC Assembly:
C. Ceramics Surface Options
1. Blank ceramics
D. Thermistor (optional)
Solder Sn-Sb (Tmelt=230°C)
Can be mounted to cold side
ceramics edge. Calibration
is available.
2. Metallized:
B. Ceramics:
2.1 Ni / Sn(Bi)
1.Pure Al2O3(100%)
2.Alumina (Al2O3 - 96%)
3.Aluminum Nitride (AlN)
2.2 Gold plating
3. Metallized and pre-tinned:
3.1 Solder 94 (Pb-Sn-Bi, Tmelt=94°C)
3.2 Solder 117 (In-Sn, Tmelt=117°C)
3.3 Solder 138 (Sn-Bi, Tmelt=138°C)
3.4 Solder 183 (Pb-Sn, Tmelt=183°C)
E. Terminal wires
1. Pre-tinned Copper
2. Insulated Wires
3. Insulated Color Coded
100% Al2O3 used as standard
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-05
Performance Plots
1ML06-029-09
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 2 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-12
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Application Tips
3. Connect TE module to DC power supply
according to polarity.
1. Never heat TE module more than 200˚C (TEC
assembled at 290˚C).
4. Do not apply DC current higher than Imax.
2. Never use TE module without attached heat sink
at hot (bottom) side.
Installation
1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or
in another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature
types require other assembling methods in most cases.
2. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this
option and also makes pre-tinning for TE modules.
3. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of
a specific type depends on application features and the type of a TE module.
Object being cooled
Object being cooled
TEC
TEC
3
1
2
Screw mounting
Heatsink
Soldering
Heatsink
Gluing
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 3 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Parameters
1ML06-029-XXt
ΔTmax Qmax Imax
Umax AC R
H
h
mm
Type
K
W
A
V
Ohm mm
1ML06-029-xxt (N=29) Al2O3 0.25mm ceramics version
1ML06-029-05t
1ML06-029-09t
1ML06-029-12t
69
71
71
6.6
3.9
2.9
3.4
2.0
1.5
0.85
1.50
2.00
1.2
1.6
1.9
0.5
0.9
1.2
3.6
Performance data are given at 300K, vacuum
Technical Drawing
Options available
A. TEC Assembly:
C. Ceramics Surface Options
1. Blank ceramics
D. Thermistor (optional)
Solder Sn-Sb (Tmelt=230°C)
Can be mounted to cold side
ceramics edge. Calibration
is available.
2. Metallized:
B. Ceramics:
2.1 Ni / Sn(Bi)
1.Pure Al2O3(100%)
2.Alumina (Al2O3 - 96%)
3.Aluminum Nitride (AlN)
2.2 Gold plating
3. Metallized and pre-tinned:
3.1 Solder 94 (Pb-Sn-Bi, Tmelt=94°C)
3.2 Solder 117 (In-Sn, Tmelt=117°C)
3.3 Solder 138 (Sn-Bi, Tmelt=138°C)
3.4 Solder 183 (Pb-Sn, Tmelt=183°C)
E. Terminal wires
1. Pre-tinned Copper
2. Insulated Wires
3. Insulated Color Coded
100% Al2O3 used as standard
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-05t
Performance Plots
1ML06-029-09t
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 2 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-12t
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Application Tips
3. Connect TE module to DC power supply
according to polarity.
1. Never heat TE module more than 200˚C (TEC
assembled at 290˚C).
4. Do not apply DC current higher than Imax.
2. Never use TE module without attached heat sink
at hot (bottom) side.
Installation
1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or
in another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature
types require other assembling methods in most cases.
2. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this
option and also makes pre-tinning for TE modules.
3. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of
a specific type depends on application features and the type of a TE module.
Object being cooled
Object being cooled
TEC
TEC
3
1
2
Screw mounting
Heatsink
Soldering
Heatsink
Gluing
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 3 of 3
Thermoelectric Module Datasheet
RMT Ltd
1ML06-029-XXAN
Performance Parameters
ΔTmax Qmax Imax
Umax AC R
H
h
mm
Type
K
W
A
V
Ohm mm
1ML06-029-xxAN (N=29) AlN 0.25mm ceramics version
1ML06-029-05AN
1ML06-029-09AN
1ML06-029-12AN
71
73
73
7.1
4.0
3.0
3.5
2.0
1.5
0.86
1.50
2.00
1.2
1.6
1.9
0.5
0.9
1.2
3.6
Performance data are given at 300K, vacuum
Technical Drawing
Options available
A. TEC Assembly:
C. Ceramics Surface Options
1. Blank ceramics
D. Thermistor (optional)
Solder Sn-Sb (Tmelt=230°C)
Can be mounted to cold side
ceramics edge. Calibration
is available.
2. Metallized:
B. Ceramics:
2.1 Ni / Sn(Bi)
1.Pure Al2O3(100%)
2.Alumina (Al2O3 - 96%)
3.Aluminum Nitride (AlN)
2.2 Gold plating
3. Metallized and pre-tinned:
3.1 Solder 94 (Pb-Sn-Bi, Tmelt=94°C)
3.2 Solder 117 (In-Sn, Tmelt=117°C)
3.3 Solder 138 (Sn-Bi, Tmelt=138°C)
3.4 Solder 183 (Pb-Sn, Tmelt=183°C)
E. Terminal wires
1. Pre-tinned Copper
2. Insulated Wires
3. Insulated Color Coded
100% AlN used as standard
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-05AN
Performance Plots
1ML06-029-09AN
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 2 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-12AN
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Application Tips
3. Connect TE module to DC power supply
according to polarity.
1. Never heat TE module more than 200˚C (TEC
assembled at 230˚C).
4. Do not apply DC current higher than Imax.
2. Never use TE module without attached heat sink
at hot (bottom) side.
Installation
1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or
in another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature
types require other assembling methods in most cases.
2. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this
option and also makes pre-tinning for TE modules.
3. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of
a specific type depends on application features and the type of a TE module.
Object being cooled
Object being cooled
TEC
TEC
3
1
2
Screw mounting
Heatsink
Soldering
Heatsink
Gluing
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 3 of 3
Thermoelectric Module Datasheet
RMT Ltd
1ML06-029-XXAN
Performance Parameters
ΔTmax Qmax Imax
Umax AC R
H
h
mm
Type
K
W
A
V
Ohm mm
1ML06-029-xxAN (N=29) AlN 0.5mm ceramics version
1ML06-029-05AN
1ML06-029-09AN
1ML06-029-12AN
70
72
72
7.1
4.0
3.0
3.5
2.0
1.5
0.85
1.50
2.00
1.7
2.1
2.4
0.5
0.9
1.2
3.6
Performance data are given at 300K, vacuum
Technical Drawing
Options available
A. TEC Assembly:
C. Ceramics Surface Options
1. Blank ceramics
D. Thermistor (optional)
Solder Sn-Sb (Tmelt=230°C)
Can be mounted to cold side
ceramics edge. Calibration
is available.
2. Metallized:
B. Ceramics:
2.1 Ni / Sn(Bi)
1.Pure Al2O3(100%)
2.Alumina (Al2O3 - 96%)
3.Aluminum Nitride (AlN)
2.2 Gold plating
3. Metallized and pre-tinned:
3.1 Solder 94 (Pb-Sn-Bi, Tmelt=94°C)
3.2 Solder 117 (In-Sn, Tmelt=117°C)
3.3 Solder 138 (Sn-Bi, Tmelt=138°C)
3.4 Solder 183 (Pb-Sn, Tmelt=183°C)
E. Terminal wires
1. Pre-tinned Copper
2. Insulated Wires
3. Insulated Color Coded
100% AlN used as standard
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-05AN
Performance Plots
1ML06-029-09AN
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 2 of 3
Thermoelectric Module Datasheet
RMT Ltd
Performance Plots
1ML06-029-12AN
Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax
Application Tips
3. Connect TE module to DC power supply
according to polarity.
1. Never heat TE module more than 200˚C (TEC
assembled at 230˚C).
4. Do not apply DC current higher than Imax.
2. Never use TE module without attached heat sink
at hot (bottom) side.
Installation
1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or
in another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature
types require other assembling methods in most cases.
2. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this
option and also makes pre-tinning for TE modules.
3. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of
a specific type depends on application features and the type of a TE module.
Object being cooled
Object being cooled
TEC
TEC
3
1
2
Screw mounting
Heatsink
Soldering
Heatsink
Gluing
53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru
Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明