3MDC10-155-20AN [RMT]
Blank ceramics (not metallized);
| 型号： | 3MDC10-155-20AN |
| 厂家： | 
RMT Ltd. |
| 描述： | Blank ceramics (not metallized) |
| 文件： | 总8页 (文件大小：2609K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thermoelectric Cooling Solutions
Performance Parameters
3MDC10-155-XXAN
ΔTmax Qmax
Imax
A
Umax AC R
H
Type
K
W
V
Ohm mm
3MDC10-155-xxAN (N=113)
3MDC10-155-05AN
3MDC10-155-08AN
3MDC10-155-10AN
3MDC10-155-15AN
3MDC10-155-20AN
100
105
106
107
108
11.8
7.9
6.5
4.5
3.4
5.5
3.8
3.1
2.2
1.7
1.76
2.68
3.29
4.82
6.34
3.8
4.7
5.3
6.8
8.3
11.3
Performance data are given for 300K, vacuum
Dimensions
Manufacturing options
A. TEC Assembly:
C. Ceramics Surface Options:
D. Thermistor (optional)
* 1. Solder SnSb (Tmelt=230°C)
1. Blank ceramics (not metallized)
Can be mounted to cold side
ceramics edge. Calibration
is
2. Solder AuSn (Tmelt=280°C)
2. Metallized (Au plating)
available by request.
3. Metallized and pre-tinned with:
3.1 Solder 117 (In-Sn, Tmelt =117°C)
3.2 Solder 138 (Sn-Bi, Tmelt = 138°C)
3.3 Solder 143 (In-Ag, Tmelt = 143°C)
3.4 Solder 157 (In, Tmelt = 157°C)
3.5 Solder 183 (Pb-Sn, Tmelt =183°C)
B. Ceramics:
E. Terminal contacts
1. Blank, tinned Copper
2. Insulated Wires
1.Pure Al2O3(100%)
2.Alumina (Al2O3- 96%)
*
3.Aluminum Nitride (AlN)
* - used by default
3. Insulated, color coded
3.6 Optional (specified by Customer)
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 8
Thermoelectric Cooling Solutions
3MDC10-155-05AN
Performance Data
ΔTmax
K
Qmax
W
Imax
A
Umax
V
ΔTmax
K
Qmax
W
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
3MDC10-155-05AN
100
11.76
5.5
11.3
3MDC10-155-05AN
105
13.32
5.7
12.7
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink thermal
resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
3MDC10-155-08AN
Performance Data
ΔTmax
K
Qmax
W
Imax
A
Umax
V
ΔTmax
K
Qmax
W
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
3MDC10-155-08AN
105
7.89
3.8
11.3
3MDC10-155-08AN
106
8.89
4.0
12.7
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink
thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 2 of 8
Thermoelectric Cooling Solutions
3MDC10-155-10AN
Performance Data
ΔTmax
K
Qmax
W
Imax
A
Umax
V
ΔTmax
K
Qmax
W
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
3MDC10-155-10AN
106
6.47
3.1
11.3
3MDC10-155-10AN
105
7.28
3.3
12.7
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink thermal
resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
3MDC10-155-15AN
Performance Data
ΔTmax
K
Qmax
W
Imax
A
Umax
V
ΔTmax
K
Qmax
W
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
3MDC10-155-15AN
107
4.46
2.2
11.3
3MDC10-155-15AN
101
5.01
2.3
12.7
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink thermal
resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 3 of 8
Thermoelectric Cooling Solutions
3MDC10-155-20AN
Performance Data
ΔTmax
K
Qmax
W
Imax
A
Umax
V
ΔTmax
K
Qmax
W
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
3MDC10-155-20AN
108
3.41
1.7
11.3
3MDC10-155-20AN
97
3.83
1.8
12.7
Note: Performance data is specified at optimal conditions (TEC hot side is stabilized at ambient temperature). Heatsink thermal
resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
Important notes
1. TEC Performance in this datasheet is specified in two standard ambient condition modes (vacuum, +27ºC and dry
nitrogen (N2), +50ºC). The performance may differ under other conditions. Please, use TECCad software from
RMT Ltd web site or contact RMT or its branch specialists directly for additional TEC performance info.
2. TEC ACR and Umax values are sensitive to ambient temperature. These values can be different from those
specified in the datasheet at other ambient conditions. ACR and Umax raise with ambient temperature increasing.
3. TEC cooling capacity (Qmax) raises with ambient temperature. Please, use TECCad software for additional info or
contact RMT specialists directly.
4. Thermoelectric coolers have the best performance in the temperature range from near room up to +80..90ºC. The
performance is lower at temperatures below 0ºC. TEC is not suitable to work at cryogenic temperatures.
5. Driving a TEC at Imax or Umax doesn’t mean max performance mode. The real optimal mode may depend on
operating conditions and heatload. In fact a better performance can be reached at operating current and voltage
lower than Imax and Umax values specified in the datasheet.
6. It is strongly recommended to avoid a direct mounting of thermoelectric cooler to pure Copper, Aluminium or
Nickel materials as well as a mounting of objects from these materials on TEC cold side. Any material with high
CTE may affect TEC lifetime and/or damage it in case of improper mounting, thermal shock or temperature
cycling. In case of above mentioned materials necessity, it is recommended to use soft solders or glues with large
modulus of elasticity (Indium-based solders or silicon-based thermoconductive glues).
7. RMT Ltd confirms that all thermoelectric coolers meet the requirements of Telcordia GR-468 standard. The up-to-
date Reliability Report is available by request. RMT Ltd warranties thermoelectric coolers lifetime no less than
250K-300K operating hours under normal application conditions.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 4 of 8
Thermoelectric Cooling Solutions
Additional Options
TEC Polarity
TEC Polarity can be modified by request. The
specified polarity in this datasheet is typical.
It can be reversed in accordance to Customer
application requirements.
-
+
Standard polarity
Reversed polarity
+
-
Terminal Wires Options
The wires are of tinned Copper, blank (not isolated)
by default. Various options for isolated wires are
available by request. The available solutions
include isolated wires, isolated color-coded wires,
flexible multicore wires and more.
Standard wires,
tinned Copper
Isolated wires
Customized Au Patterns
Customized Au patterns on thermoelectric cooler
cold side are available by request. Selective Pre-
tinning over pattern is also available. Please,
contact RMT Ltd for additional information about
customized Au patterns requirements.
Customized Au pattern
on cold side
Selective pre-tinning
over pattern
TEC Height modification
Standard TEC height can be modified without
performance changes by using ceramics of
different thickness. 3MDC10 Series thermoelectric
cooler height (specified in this datasheet) can be
modified in a range 0..+2.0mm by request.
Standard height
Modified height,
another ceramics
thickness
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 5 of 8
Thermoelectric Cooling Solutions
Thermoelectric Cooler Overview
Cold side Ceramics
(top side)
AlN Ceramics by default
(Al2O3 solution is available
by request)
TE Cooler Lead Free
Internal Assembly
(Lead-Free Solder 230,
Sn-Sb)
Middle Ceramics
TEC Polarity
(can be modified by
request)
Pellets (BiTe posts)
Hot Side Ceramics
-
(bottom side)
Terminal Wires
+
Application Tips
1. Never heat TE module more than 200˚C (TEC
assembled at 230˚C).
3. Connect TE module to DC power supply according
to polarity.
2. Never use TE module without an attached heat sink
at hot (bottom) side.
4. Do not apply DC current higher than Imax.
Installation
1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or in
another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature types
require other assembling methods in most cases.
1. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this option
and also makes pre-tinning for TE modules.
2. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a
specific type depends on application features and the type of a TE module.
Object being cooled
Object being cooled
TEC
TEC
3
1
2
Screw mounting
Heatsink
Soldering
Heatsink
Gluing
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 6 of 8
Thermoelectric Cooling Solutions
Contacts
!
RMT Ltd. Headquarters
Warshavskoe sh. 46, 115230, Moscow
Russia
Phone: +7-499-678-2082
Fax: +7-499-678-2083
Web: www.rmtltd.ru
Email: info@rmtltd.ru
!
EUROPE/USA - TEC Microsystems GmbH
Schwarzschildstrasse 3, 12489 Berlin
Germany
Tel. +49 30 6789 3314
Fax+49 30 6789 3315
Web: www.tec-microsystems.com
Email: info@tec-microsystems.com
!
CHINA - ProTEC Ltd.
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢉꢊꢋꢌBꢍ207
ꢎꢏꢐ+86-755-61596066
ꢑꢒꢐ+86-755-61596036
ꢓꢔꢐ518054
Web: www.protecltd.com
Email: info@protecltd.com
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 7 of 8
Thermoelectric Cooling Solutions
!
Legal Notice
!
All logos, images, trademarks and product names (collectively Materials) are proprietary to RMT Ltd and/ or any
of its affiliates, or subsidiaries, or other respective owners that have granted RMT Ltd the permission and/or
license to use such Materials. All images are provided by RMT Ltd. and are subjects of copyright protection.
RMT Ltd, TEC Microsystems GmbH and ProTEC Ltd do not grant a copyright license (express or implied) to the
Recipient, except that Recipient may reproduce the logos, images and text materials in this press-release
without any alteration for non-promotional or editorial purposes only with a written note about materials owner.
!
Copyright protection warning
!
Graphic materials and text from this datasheet may not be used commercially without a prior response in
writing on company letterhead and signed by RMT Ltd authority. Thank you for respecting the intellectual
property rights protected by the International Copyright laws.
Warning: All datasheet images contain RMT Ltd hidden watermark for the immediate proof of their origin.
RMT Image
Hidden Watermark
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2013. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 8 of 8
相关型号：
3MN-DP-7-AP1/1-M2GE
Pushbutton Switch, DPDT, Latched And Momentary, 1A, 28VDC, Solder Terminal, Through Hole-straight
Carling Techn
3MN-DP-7-AP1/1-M5-1GE
Pushbutton Switch, DPDT, Latched And Momentary, 1A, 28VDC, Wire Wrap Terminal, Panel Mount-threaded
Carling Techn
3MN-DP-7-AP1/1-M5-1RE
Pushbutton Switch, DPDT, Latched And Momentary, 0.02A, 20VDC, Wire Wrap Terminal, Panel Mount-threaded
Carling Techn
3MN-DP-7-AP1/1-M5-3RE
Pushbutton Switch, DPDT, Momentary, 0.02A, 20VDC, Wire Wrap Terminal, Panel Mount
Carling Techn
3MN-DP-7-AP1/1-M6GE
Pushbutton Switch, DPDT, Latched And Momentary, 1A, 28VDC, Solder Terminal, Through Hole-right Angle
Carling Techn
©2020 ICPDF网 联系我们和版权申明