FAN1086M25 [ROCHESTER]
2.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, POWER, PLASTIC, TO-263, D2PAK-3;![FAN1086M25](http://pdffile.icpdf.com/pdf2/p00233/img/icpdf/FAN1086M25_1367835_icpdf.jpg)
型号: | FAN1086M25 |
厂家: | ![]() |
描述: | 2.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, POWER, PLASTIC, TO-263, D2PAK-3 输出元件 调节器 |
文件: | 总16页 (文件大小:1109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
www.fairchildsemi.com
FAN1086
1.5A Adjustable/Fixed Low Dropout Linear Regulator
Features
Description
• Low dropout voltage
• Load regulation: 0.05% typical
• Trimmed current limit
• On-chip thermal limiting
• Standard SOT-223, TO-263, and TO-252 packages
• Three-terminal adjustable or fixed 2.5V, 2.85V, 3.3V, 5V
The FAN1086 and FAN1086-2.5, -2.85, -3.3 and -5 are low
dropout three-terminal regulators with 1.5A output current
capability. These devices have been optimized for low voltage
where transient response and minimum input voltage are
critical. The 2.85V version is designed specifically to be
used in Active Terminators for SCSI bus.
Current limit is trimmed to ensure specified output current
and controlled short-circuit current. On-chip thermal limiting
provides protection against any combination of overload and
ambient temperatures that would create excessive junction
temperatures.
Applications
• Active SCSI terminators
• High efficiency linear regulators
• Post regulators for switching supplies
• Battery chargers
• 5V to 3.3V linear regulators
• Motherboard clock supplies
Unlike PNP type regulators where up to 10% of the output
current is wasted as quiescent current, the quiescent current
of the FAN1086 flows into the load, increasing efficiency.
The FAN1086 series regulators are available in the industry-
standard SOT-223, TO-263, and TO-252 power packages.
Typical Applications
FAN1086
VIN = 3.3V
VIN
VOUT
1.5V at 1.5A
+
+
10µF
22µF
R1
124Ω
ADJ
R2
24.9Ω
VOUT = VREF(1+R2/R1) + IAdj • R2
FAN1086-2.85
VIN VOUT
VIN = 5V
2.85V at 1.5A
+
+
10µF
22µF
GND
REV. 1.0.5 2/11/02
PRODUCT SPECIFICATION
FAN1086
Pin Assignments
Tab is
VOUT
Front View
Tab is
VOUT
3
2
IN
Tab is
VOUT
OUT
1
ADJ/GND
4-Lead Plastic SOT-223
JC = 15°C/W*
1
2
3
1
2
3
Θ
ADJ/
GND
IN
ADJ/
GND
OUT
IN
3-Lead Plastic TO-252
JC = 3°C/W*
Θ
3-Lead Plastic TO-263
JC = 3°C/W*
Θ
*With package soldered to 0.5 square inch copper area over backside ground plane or internal power plane, ΘJA can vary from
30°C/W to more than 50°C/W. Other mounting techniques may provide better thermal resistance than 30°C/W.
Absolute Maximum Ratings
Parameter
Min.
Max.
7.5
Unit
V
VIN
Operating Junction Temperature Range
Storage Temperature Range
Lead Temperature (Soldering, 10 sec.)
0
125
150
300
°C
°C
°C
-65
2
REV. 1.0.5 2/11/02
FAN1086
PRODUCT SPECIFICATION
Electrical Characteristics
Operating Conditions: VIN ≤ 7V, TJ = 25°C unless otherwise specified.
The • denotes specifications which apply over the specified operating temperature range.
Parameter
Conditions
Min.
Typ.
Max. Units
Reference Voltage3, VREF
1.5V ≤ (VIN - VOUT ) ≤ 5.75V,
10mA ≤ IOUT ≤ 1A
•
1.225
(-2%)
1.250
1.275
(+2%)
V
Output Voltage
10mA ≤ IOUT ≤ 1A
FAN1086-2.5, 4V ≤ VIN ≤ 7V
FAN1086-2.85, 4.35V ≤ VIN ≤ 7V
FAN1086-3.3, 4.8V ≤ VIN ≤ 7V
FAN1086-5, 6.5V ≤ VIN ≤ 7V
•
•
•
•
2.450
2.793
3.234
4.900
2.5
2.85
3.3
2.550
2.907
3.366
5.100
V
V
V
V
5.0
Line Regulation1,2
Load Regulation1,2
Dropout Voltage
(VOUT + 1.5V) ≤ VIN ≤ 7V, IOUT = 10mA
(VIN – VOUT ) = 2V, 10mA ≤ IOUT ≤ 1A
∆VREF = 1%, IOUT = 1.5A
•
•
•
•
•
•
0.005
0.05
1.300
2.0
0.2
0.5
%
%
V
1.500
Current Limit
(VIN – VOUT ) = 2V
1.6
A
Adjust Pin Current3, IAdj
Adjust Pin Current Change3
35
120
5
µA
µA
1.5V ≤ (VIN – VOUT ) ≤ 5.75,
10mA ≤ IOUT ≤ 1A
0.2
Minimum Load Current
Quiescent Current
Ripple Rejection
1.5V ≤ (VIN – VOUT ) ≤ 5.75
•
•
10
60
mA
mA
dB
VIN = VOUT + 1.25V
4
13
f = 120Hz, COUT = 22µF Tantalum,
(VIN – VOUT ) = 3V, IOUT = 1.5A
72
Thermal Regulation
Temperature Stability
Long-Term Stability
RMS Output Noise
TA = 25°C, 30ms pulse
0.004
0.5
0.02
1.0
%/W
%
•
TA = 125°C, 1000hrs.
0.03
0.003
%
TA = 25°C, 10Hz ≤ f ≤ 10kHz
%
(% of VOUT
)
Thermal Resistance,
Juncation to Case
SOT-223
15
3
°C/W
°C/W
°C
TO-263, TO-252
Junction Temperature
Thermal Shutdown
155
10
Thermal Shutdown
Hysteresis
°C
Notes:
1. See thermal regulation specifications for changes in output voltage due to heating effects. Load and line regulation are
measured at a constant junction temperature by low duty cycle pulse testing.
2. Line and load regulation are guaranteed up to the maximum power dissipation. Power dissipation is determined by input/
output differential and the output current. Guaranteed maximum output power will not be available over the full input/output
voltage range.
3. FAN1086 only.
REV. 1.0.5 2/11/02
3
PRODUCT SPECIFICATION
FAN1086
Typical Performance Characteristics
1.5
1.4
0.10
0.05
0
∆I = 1A
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0
-0.05
-0.10
-0.15
-0.20
0
0.3
0.6
0.9
1.2
1.5
-75 -50 -25
0
25 50 75 100 125150 175
OUTPUT CURRENT (A)
JUNCTION TEMPERATURE (°C)
Figure 1. Dropout Voltage vs. Output Current
Figure 2. Load Regulation vs. Temperature
1.250
1.245
1.240
1.235
1.230
1.225
1.220
1.215
1.210
1.205
1.200
3.70
VOUT SET WITH 1% RESISTORS
3.65
VOUT = 3.6V1
3.60
3.55
3.50
3.45
3.40
3.35
VOUT = 3.3V
3.30
3.25
3.20
Note:
1. FAN1086 Only
-75 -50 -25
0
25 50 75 100 125150 175
-75 -50 -25
0
25 50 75 100 125150 175
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 3. Reference Voltage vs. Temperature
Figure 4. Output Voltage vs. Temperature
5
4
3
2
1
0
100
Note:
90
1. FAN1086 Only
80
70
60
50
40
30
20
10
0
-75 -50 -25
0
25 50 75 100 125150 175
-75 -50 -25
0
25 50 75 100 125150 175
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 5. Minimum Load Current vs. Temperature
Figure 6. Adjust Pin Current vs. Temperature
4
REV. 1.0.5 2/11/02
FAN1086
PRODUCT SPECIFICATION
Typical Performance Characteristics (continued)
90
80
70
60
50
2.0
1.75
1.5
40
30
1.25
(VIN - VOUT) = 3V
0.5 < VRIPPLE < 2V
IOUT = 1A
20
10
0
1.0
-75 -50 -25
0
25 50 75 100 125150 175
10
100
1K
10K
100K
JUNCTION TEMPERATURE (°C)
FREQUENCY (Hz)
Figure 7. Short-Circuit Current vs. Temperature
Figure 8. Ripple Rejection vs. Frequency
10
7.5
5
TO-263
SOT-223
2.5
0
25
45
65
85
105
125
CASE TEMPERATURE (°C)
Figure 9. Maximum Power Dissipation
REV. 1.0.5 2/11/02
5
PRODUCT SPECIFICATION
FAN1086
Mechanical Dimensions
3-Lead TO-263 Package
Notes:
Inches
Millimeters
1. Dimensions are exclusive of mold flash and metal burrs.
Symbol
Notes
2. Standoff-height is measured from lead tip with ref. to Datum -B-.
3. Foot length is measured with ref. to Datum -A- with lead surface
(at inner R).
4. Dimensiuon exclusive of dambar protrusion or intrusion.
5. Formed leads to be planar with respect to one another at seating
place -C-.
Min.
Max.
Min.
Max.
A
.160
.020
.049
.045
.340
.380
.190
.036
.051
.055
.380
.405
4.06
0.51
1.25
1.14
8.64
9.65
4.83
0.91
1.30
1.40
9.65
10.29
b
b2
c2
D
E
e
.100 BSC
2.54 BSC
L
.575
.090
—
.017
0°
.625
14.61
2.29
—
0.43
0°
15.88
2.79
1.40
0.78
8°
L1
L2
R
.110
.055
.019
8°
α
E
@PKG/
@HEATSINK
L2
c2
D
E-PIN
L
R (2 PLCS)
b2
L1
b
e
-B- -A-
A
-C-
6
REV. 1.0.5 2/11/02
FAN1086
PRODUCT SPECIFICATION
Mechanical Dimensions
4-Lead SOT-223 Package
Inches
Millimeters
Symbol
Notes
Min.
Max.
Min.
Max.
A
A1
B
c
—
—
.071
.181
.033
.090
.264
.148
.124
.041
.287
—
—
—
1.80
4.80
.840
2.29
6.71
3.71
3.15
1.04
7.29
—
.025
—
.640
—
D
E
e
.248
.130
.115
.033
.264
.012
—
6.30
3.30
2.95
.840
6.71
.310
—
F
H
I
10°
10°
J
10°
.0008
16°
.0040
10°
.0203
16°
.1018
K
L
10°
.010
16°
.014
10°
.250
16°
.360
M
N
D
e
K
A
E
H
N
J
I
M
L
B
A1
c
F
REV. 1.0.5 2/11/02
7
PRODUCT SPECIFICATION
FAN1086
Mechanical Dimensions
3-Lead TO-252 Package
Notes:
Inches
Millimeters
Symbol
Notes
1. Dimensions are exclusive of mold flash and metal burrs.
Min.
Max.
Min.
Max.
2. Stand off-height is measured from lead tip with ref. to Datum -B-.
3. Foot length is measured with ref. to Datum -A- with lead surface.
4. Thermal pad contour optional within dimensions b3 and L3
A
.086
.025
.030
.205
.018
.018
.210
.250
.094
.035
.045
.215
.024
.023
.245
.265
2.19
0.64
0.76
5.21
0.46
0.46
5.33
6.35
2.39
0.89
1.14
5.46
0.61
0.58
6.22
6.73
b
b2
b3
c
c2
D
5. Formed leads to be planar with respect to one another at seating
plane -C-.
4
6. Dimensions and tolerances per ASME Y14.5M-1994.
1
1
E
e
.090 BSC
2.29 BSC
H
.370
.055
.410
.070
9.40
1.40
10.41
1.78
L
3
4
L1
L3
L4
.108 REF
2.74 REF
.035
.025
.080
.040
0.89
0.64
2.03
1.02
E
@PKG/
@HEATSINK
L3
b3
c2
D
E-PIN
L4
H
b2
L1
L
c
b
e
α = 0°–10°
-B- -A-
A
-C-
8
REV. 1.0.5 2/11/02
PRODUCT SPECIFICATION
FAN1086
Ordering Information
Product Number
FAN1086DX
Package
TO-252
TO-263
SOT-223
TO-252
TO-263
SOT-223
TO-252
TO-263
SOT-223
TO-252
TO-263
SOT-223
TO-252
TO-263
SOT-223
FAN1086MX
FAN1086SX
FAN1086D25X
FAN1086M25X
FAN1086S25X
FAN1086D285X
FAN1086M285X
FAN1086S285X
FAN1086D33X
FAN1086M33X
FAN1086S33X
FAN1086D5X
FAN1086M5X
FAN1086S5X
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
2/11/02 0.0m 004
Stock#DS30001117
2001 Fairchild Semiconductor Corporation
Product Folder - Fairchild P/N FAN1086x285 - 1.5A Fixed 2.85V Low Dropout Voltage Regulator (LDO)
SEARCH | Parametric | Cross Reference
sp
Fairchild Semiconductor
GO
Home >> Find products >>
find products
FAN1086x285
Related Links
Products groups
1.5A Fixed 2.85V Low Dropout Voltage
Regulator (LDO)
Analog and Mixed
Signal
Discrete
Interface
Logic
Microcontrollers
Non-Volatile
Memory
Optoelectronics
Markets and
applications
New products
Product selection and
parametric search
Cross-reference
search
Request samples
How to order products
Datasheet
Download this
datasheet
Contents
General description | Features | Applications |
Product status/pricing/packaging
Product Change Notices
(PCNs)
PDF
Support
Distributor and field sales
representatives
General description
e-mail this datasheet
[E-
Quality and reliability
The FAN1086 and FAN1086-2.5,-2.85,-3.3
and -5 are low dropout three-terminal
regulators with 1.5A output current
capability.These devices have been optimized
for low voltage where transient response and
minimum input voltage are critical.The 2.85V
version is designed specifically to be used in
Active Terminators for SCSI bus.
This pagePrint version
Design tools
technical information
buy products
Current limit is trimmed to ensure specified
output current and controlled short-circuit
current. On-chip thermal limiting provides
protection against any combination of overload
and ambient temperatures that would create
excessive junction temperatures.
technical support
my Fairchild
company
Unlike PNP type regulators where up to 10%
of the output current is wasted as quiescent
current,the quiescent current of the FAN1086
flows into the load, increasing efficiency.
The FAN1086 series regulators are available in
the industry standard SOT-223,TO-263,and TO-
252 power packages.
back to top
Features
file:///H|/imaging/BITTING/cpl/20020725_1/07252002_10/FAIR/07252002/FAN1086x285.html (1 of 2) [Jul/26/2002 4:26:20 PM]
Product Folder - Fairchild P/N FAN1086x285 - 1.5A Fixed 2.85V Low Dropout Voltage Regulator (LDO)
●
●
●
●
●
Low dropout voltage
Load regulation: 0.05% typical
Trimmed current limit
On-chip thermal limiting
Standard SOT-223, TO-263 and TO-252
packages
●
Three-terminal adjustable or fixed 2.5V,
2.85V, 3.3V, 5V
back to top
Applications
●
●
●
●
●
●
Active SCSI terminators
High efficiency linear regulators
Post regulators for switching supplies
Battery chargers
5V to 3.3V linear regulators
Motherboard clock supplies
back to top
Product status/pricing/packaging
Packing
method
Product
Product status Pricing* Package type Leads Package marking
$Y&Z&2&T
1086M285
C
FAN1086M285 Full Production $0.486 TO-263(D2PAK)
3
4
3
RAIL
$Y&Z&2&T
1086S285
TAPE
REEL
SOT-223
FAN1086S285X Full Production $0.457
FAN1086D285X Full Production $0.486
$Y&Z&2&T
1086D285
C
TAPE
REEL
TO-252(DPAK)
$Y&Z&2&T
1086M285
C
TAPE
REEL
FAN1086M285X Full Production $0.486 TO-263(D2PAK)
* 1,000 piece Budgetary Pricing
3
back to top
Home | Find products | Technical information | Buy products |
Support | Company | Contact us | Site index | Privacy policy
© Copyright 2002 Fairchild Semiconductor
file:///H|/imaging/BITTING/cpl/20020725_1/07252002_10/FAIR/07252002/FAN1086x285.html (2 of 2) [Jul/26/2002 4:26:20 PM]
Product Folder - Fairchild P/N FAN1086x25 - 1.5A Fixed 2.5V Low Dropout Voltage Regulator (LDO)
SEARCH | Parametric | Cross Reference
sp
Fairchild Semiconductor
GO
Home >> Find products >>
find products
FAN1086x25
Related Links
Products groups
1.5A Fixed 2.5V Low Dropout Voltage
Regulator (LDO)
Analog and Mixed
Signal
Discrete
Interface
Logic
Microcontrollers
Non-Volatile
Memory
Optoelectronics
Markets and
applications
New products
Product selection and
parametric search
Cross-reference
search
Request samples
How to order products
Datasheet
Download this
datasheet
Contents
General description | Features | Applications |
Product status/pricing/packaging
Product Change Notices
(PCNs)
PDF
Support
Distributor and field sales
representatives
General description
e-mail this datasheet
[E-
Quality and reliability
The FAN1086 and FAN1086-2.5,-2.85,-3.3
and -5 are low dropout three-terminal
regulators with 1.5A output current
capability.These devices have been optimized
for low voltage where transient response and
minimum input voltage are critical.The 2.85V
version is designed specifically to be used in
Active Terminators for SCSI bus.
This pagePrint version
Design tools
technical information
buy products
Current limit is trimmed to ensure specified
output current and controlled short-circuit
current. On-chip thermal limiting provides
protection against any combination of overload
and ambient temperatures that would create
excessive junction temperatures.
technical support
my Fairchild
company
Unlike PNP type regulators where up to 10%
of the output current is wasted as quiescent
current,the quiescent current of the FAN1086
flows into the load, increasing efficiency.
The FAN1086 series regulators are available in
the industry standard SOT-223,TO-263,and TO-
252 power packages.
back to top
Features
file:///H|/imaging/BITTING/cpl/20020725_1/07252002_10/FAIR/07252002/FAN1086x25.html (1 of 2) [Jul/26/2002 4:26:24 PM]
Product Folder - Fairchild P/N FAN1086x25 - 1.5A Fixed 2.5V Low Dropout Voltage Regulator (LDO)
●
●
●
●
●
Low dropout voltage
Load regulation: 0.05% typical
Trimmed current limit
On-chip thermal limiting
Standard SOT-223, TO-263 and TO-252
packages
●
Three-terminal adjustable or fixed 2.5V,
2.85V, 3.3V, 5V
back to top
Applications
●
●
●
●
●
●
Active SCSI terminators
High efficiency linear regulators
Post regulators for switching supplies
Battery chargers
5V to 3.3V linear regulators
Motherboard clock supplies
back to top
Product status/pricing/packaging
Packing
method
Product
Product status Pricing* Package type Leads Package marking
$Y&Z&2&T
1086M25
C
FAN1086M25X Full Production $0.486 TO-263(D2PAK)
3
3
TAPE REEL
TAPE REEL
$Y&Z&2&T
1086D25
C
TO-252(DPAK)
FAN1086D25X Full Production $0.486
$Y&Z&2&T
1086M25
C
FAN1086M25 Full Production $0.486 TO-263(D2PAK)
3
4
RAIL
$Y&Z&2&T
1086S25
SOT-223
FAN1086S25X Full Production $0.457
* 1,000 piece Budgetary Pricing
TAPE REEL
back to top
Home | Find products | Technical information | Buy products |
Support | Company | Contact us | Site index | Privacy policy
© Copyright 2002 Fairchild Semiconductor
file:///H|/imaging/BITTING/cpl/20020725_1/07252002_10/FAIR/07252002/FAN1086x25.html (2 of 2) [Jul/26/2002 4:26:24 PM]
Product Folder - Fairchild P/N FAN1086x33 - 1.5A Fixed 3.3V Low Dropout Voltage Regulator (LDO)
SEARCH | Parametric | Cross Reference
sp
Fairchild Semiconductor
GO
Home >> Find products >>
find products
FAN1086x33
Related Links
Products groups
1.5A Fixed 3.3V Low Dropout Voltage
Regulator (LDO)
Analog and Mixed
Signal
Discrete
Interface
Logic
Microcontrollers
Non-Volatile
Memory
Optoelectronics
Markets and
applications
New products
Product selection and
parametric search
Cross-reference
search
Request samples
How to order products
Datasheet
Download this
datasheet
Contents
General description | Features | Applications |
Product status/pricing/packaging
Product Change Notices
(PCNs)
PDF
Support
Distributor and field sales
representatives
General description
e-mail this datasheet
[E-
Quality and reliability
The FAN1086 and FAN1086-2.5,-2.85,-3.3
and -5 are low dropout three-terminal
regulators with 1.5A output current
capability.These devices have been optimized
for low voltage where transient response and
minimum input voltage are critical.The 2.85V
version is designed specifically to be used in
Active Terminators for SCSI bus.
This pagePrint version
Design tools
technical information
buy products
Current limit is trimmed to ensure specified
output current and controlled short-circuit
current. On-chip thermal limiting provides
protection against any combination of overload
and ambient temperatures that would create
excessive junction temperatures.
technical support
my Fairchild
company
Unlike PNP type regulators where up to 10%
of the output current is wasted as quiescent
current,the quiescent current of the FAN1086
flows into the load, increasing efficiency.
The FAN1086 series regulators are available in
the industry standard SOT-223,TO-263,and TO-
252 power packages.
back to top
Features
file:///H|/imaging/BITTING/cpl/20020725_1/07252002_10/FAIR/07252002/FAN1086x33.html (1 of 2) [Jul/26/2002 4:26:29 PM]
Product Folder - Fairchild P/N FAN1086x33 - 1.5A Fixed 3.3V Low Dropout Voltage Regulator (LDO)
●
●
●
●
●
Low dropout voltage
Load regulation: 0.05% typical
Trimmed current limit
On-chip thermal limiting
Standard SOT-223, TO-263 and TO-252
packages
●
Three-terminal adjustable or fixed 2.5V,
2.85V, 3.3V, 5V
back to top
Applications
●
●
●
●
●
●
Active SCSI terminators
High efficiency linear regulators
Post regulators for switching supplies
Battery chargers
5V to 3.3V linear regulators
Motherboard clock supplies
back to top
Product status/pricing/packaging
Packing
method
Product
Product status Pricing* Package type Leads Package marking
$Y&Z&2&T
1086D33
C
TO-252(DPAK)
FAN1086D33X Full Production $0.486
3
TAPE REEL
$Y&Z&2&T
1086M33
C
FAN1086M33 Full Production $0.486 TO-263(D2PAK)
3
4
3
RAIL
$Y&Z&2&T
1086S33
SOT-223
FAN1086S33X Full Production $0.457
TAPE REEL
TAPE REEL
$Y&Z&2&T
1086M33
C
FAN1086M33X Full Production $0.486 TO-263(D2PAK)
* 1,000 piece Budgetary Pricing
back to top
Home | Find products | Technical information | Buy products |
Support | Company | Contact us | Site index | Privacy policy
© Copyright 2002 Fairchild Semiconductor
file:///H|/imaging/BITTING/cpl/20020725_1/07252002_10/FAIR/07252002/FAN1086x33.html (2 of 2) [Jul/26/2002 4:26:29 PM]
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_2.jpg)
FAN1086M25X_NL
Fixed Positive LDO Regulator, 2.5V, 1.5V Dropout, PSSO3, LEAD FREE, PLASTIC, TO-263, 3 PIN
FAIRCHILD
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_2.jpg)
FAN1086M285
Fixed Positive LDO Regulator, 2.85V, 1.5V Dropout, BIPolar, PSSO3, POWER, PLASTIC, TO-263, D2PAK-3
FAIRCHILD
![](http://pdffile.icpdf.com/pdf2/p00233/img/page/FAN1086M25_1367835_files/FAN1086M25_1367835_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00233/img/page/FAN1086M25_1367835_files/FAN1086M25_1367835_2.jpg)
FAN1086M285
2.85V FIXED POSITIVE LDO REGULATOR, 1.5V DROPOUT, PSSO3, POWER, PLASTIC, TO-263, D2PAK-3
ROCHESTER
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_2.jpg)
FAN1086M33
Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3, POWER, PLASTIC, TO-263, D2PAK-3
FAIRCHILD
![](http://pdffile.icpdf.com/pdf2/p00233/img/page/FAN1086M25_1367835_files/FAN1086M25_1367835_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00233/img/page/FAN1086M25_1367835_files/FAN1086M25_1367835_2.jpg)
FAN1086M33
3.3 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, POWER, PLASTIC, TO-263, D2PAK-3
ROCHESTER
![](http://pdffile.icpdf.com/pdf2/p00284/img/page/FAN1086D33X_1697937_files/FAN1086D33X_1697937_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00284/img/page/FAN1086D33X_1697937_files/FAN1086D33X_1697937_2.jpg)
FAN1086M33X
3.3 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, PLASTIC, TO-263, 3 PIN
ROCHESTER
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00051/img/page/FAN1086_265773_files/FAN1086_265773_2.jpg)
FAN1086M33X_NL
Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, PSSO3, LEAD FREE, PLASTIC, TO-263, 3 PIN
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明